[Bug 327601] New: Start after suspend to disk (hybernation) in 10. 3RC1 fails.
https://bugzilla.novell.com/show_bug.cgi?id=327601 Summary: Start after suspend to disk (hybernation) in 10.3RC1 fails. Product: openSUSE 10.3 Version: RC 1 Platform: i686 OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers@forge.provo.novell.com ReportedBy: atolboo@hotmail.com QAContact: qa@suse.de Found By: --- Created an attachment (id=174080) --> (https://bugzilla.novell.com/attachment.cgi?id=174080) The /var/log/pm-suspend.log file Starting the PC after suspend to disk ends with the following screeninfo: Sep 22 14:49:02 linux-q9bp kernel: swsups: Basic memery bitmaps created Looking for splash system... found s2disk: Snapshotting system s2disk: returned to userspace Sep 22 14:50:17 linux-q9bp kernel: Stopping tasks ... done Sep 22 14:50:17 linux-q9bp kernel: Shrinking memory... done (1727 pages freed) Sep 22 14:50:17 linux-q9bp kernel: Freed 6908 kbytes in 0.16 seconds (43.17 MB/s) Sep 22 14:50:17 linux-q9bp kernel: Suspending console(s) Sep 22 14:50:17 linux-q9bp kernel: pci_set_power_state(): 0000:00:00.0 state=3, current state=5 Sep 22 14:50:17 linux-q9bp kernel: Disabling non-boot CPUs ... Sep 22 14:50:17 linux-q9bp kernel: Breaking affinity for irq 1 Sep 22 14:50:17 linux-q9bp kernel: Breaking affinity for irq 12 Sep 22 14:50:17 linux-q9bp kernel: Breaking affinity for irq 15 Sep 22 14:50:17 linux-q9bp kernel: Breaking affinity for irq 21 Sep 22 14:50:17 linux-q9bp kernel: Breaking affinity for irq 22 Sep 22 14:50:17 linux-q9bp kernel: CPU 1 is now offline Sep 22 14:50:17 linux-q9bp kernel: CPU1 is down Sep 22 14:50:17 linux-q9bp kernel: swsusp:critical section: Sep 22 14:50:17 linux-q9bp kernel: swsusp: Need to copy 114723 pages Sep 22 14:50:17 linux-q9bp kernel: Enabling non-boot CPUs ... Sep 22 14:50:17 linux-q9bp kernel: VBooting processor 1/1 eip 3000 Sep 22 14:50:17 linux-q9bp kernel: Calibrating delay using timer specific routine.. 6028.30 BogoMIPS (lpj=12056605) Sep 22 14:50:17 linux-q9bp kernel: monitor/mwait feature present. Sep 22 14:50:17 linux-q9bp kernel: CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 Sep 22 14:50:17 linux-q9bp kernel: CPU1 is up Sep 22 14:50:17 linux-q9bp kernel: usb usb1: root hub lost power or was reset Sep 22 14:50:17 linux-q9bp kernel: usb usb2: root hub lost power or was reset Sep 22 14:50:17 linux-q9bp kernel: usb usb3: root hub lost power or was reset Sep 22 14:50:17 linux-q9bp kernel: usb usb4: root hub lost power or was reset Sep 22 14:50:17 linux-q9bp kernel: usb usb5: root hub lost power or was reset Sep 22 14:50:17 linux-q9bp kernel: pnp: Failed to activate device 00:09. Sep 22 14:50:17 linux-q9bp kernel: pnp: Failed to activate device 00:0a. Sep 22 14:50:17 linux-q9bp kernel: Restarting tasks ... done. The only thing I can do is to push the reset button. With 10.2 I do not have this problem. The contents of /var/run/pm-suspend is: export KERNEL_LOGLEVEL=1 I will attach the /var/log/pm-suspend.log file -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 Jiri Kosina <jkosina@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|kernel-maintainers@forge.provo.novell.com |pavel@novell.com -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601#c2 Pavel Machek <pavel@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |seife@novell.com Status|NEW |ASSIGNED --- Comment #2 from Pavel Machek <pavel@novell.com> 2007-10-03 03:05:24 MST --- Can you try it from minimal system? At the point it locks up, does it react to console switches? Can you do sysrq-9, sysrq-P to list processes at that point? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601#c3 Antoon Tolboom <atolboo@hotmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |atolboo@hotmail.com --- Comment #3 from Antoon Tolboom <atolboo@hotmail.com> 2007-10-03 14:58:20 MST --- sysrq(PrintScrn)+9 only puts a 9 on the screen. sysrq(PrintScrn)+p only puts a p on the screen. No reaction after this. Is this what you mean with "console switches"? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601#c4 Jiri Kosina <jkosina@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO Info Provider| |atolboo@hotmail.com --- Comment #4 from Jiri Kosina <jkosina@novell.com> 2007-10-03 15:59:26 MST --- Antoon, alt-sysrq-9 and alt-sysrq-P is the correct combination. Thanks. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601#c5 --- Comment #5 from Antoon Tolboom <atolboo@hotmail.com> 2007-10-04 09:34:04 MST --- First an addition to my first report: After the line Sep 22 14:50:17 linux-q9bp kernel: Restarting tasks ... done. appears the following line appears after 3 minutes: SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=83.87.118.121 DST=224.0.0.251 LEN=64 TOS=0x00 PEC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 and this line is repeated every 3 minutes. And now the reaction to the console switches (-)=hit the keys after each other (+)=hit all the keys at the same time alt-sysrq-9 -> 9 alt-sysrq-p -> p alt+sysrq+9 -> sysRq : This sysrq operation is disabled alt+sysrq+p -> sysRq : This sysrq operation is disabled -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601#c6 --- Comment #6 from Pavel Machek <pavel@novell.com> 2007-10-09 02:19:49 MST --- Yes, you need to enable magic sysrq combinations. You probably need echo 1 > /proc/sys/kernel/sysrq or something. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601#c7 Antoon Tolboom <atolboo@hotmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|atolboo@hotmail.com | --- Comment #7 from Antoon Tolboom <atolboo@hotmail.com> 2007-10-10 14:13:30 MST ---
From http://en.opensuse.org/Bugs/Kernel In addition, you may want to edit /etc/sysconfig/sysctl and change the variable ENABLE_SYSRQ to "yes". This will ensure that sysrq is enabled after reboot. I followed the above method.
Output of Alt+SysRq+9 is: SysRq : Changing Loglevel Loglevel set to 9 Oct 10 20:44:09 53577679 kernel: Loglevel set to 9 Output of Alt+SysRq+P is: SysRq : Show Regs Pid: 0, comm: swapper EIP: 0060:[<c0103246>] CPU: 0 EIP is at mwait_idle_with_hints+0x3b/0x3f EFLAGS: 00000246 Tainted: G N (2.6.22.5-23-default #1) EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX:00000000\par ESI: 00000000 EDI: c0386008 EBP: 00001d76 DS: 007b ES: 007b FS: 00d8 CR0: 8005003b CR2: b735a378 CR3: 1fa30000 CR4: 000006d0 [<c010324a>] mwait_idle+0x0/0x13 [<c01033af>] cpu_idle+0xaa/0xcb [<c038c9a4>] start_kernel+0x352/0x35a [<c038c17e>] unknown_bootoption+0x0/0x216 ===================== Oct 10 20:44:25 53577679 kernel: Oct 10 20:44:25 53577679 kernel: Pid: 0, comm: swapper Oct 10 20:44:25 53577679 kernel: EIP: 0060:[<c0103246>] CPU: 0 Oct 10 20:44:25 53577679 kernel: EIP is at mwait_idle_with_hints+0x3b/0x3f Oct 10 20:44:25 53577679 kernel: EFLAGS: 00000246 Tainted: G N (2.6.22.5-23-default #1) Oct 10 20:44:25 53577679 kernel: EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX:00000000 Oct 10 20:44:25 53577679 kernel: ESI: 00000000 EDI: c0386008 EBP: 00001d76 DS: 007b ES: 007b FS: 00d8 Oct 10 20:44:25 53577679 kernel: CR0: 8005003b CR2: b735a378 CR3: 1fa30000 CR4: 000006d0 Oct 10 20:44:25 53577679 kernel: [<c010324a>] mwait_idle+0x0/0x13 Oct 10 20:44:25 53577679 kernel: [<c01033af>] cpu_idle+0xaa/0xcb Oct 10 20:44:25 53577679 kernel: [<c038c9a4>] start_kernel+0x352/0x35a Oct 10 20:44:25 53577679 kernel: [<c038c17e>] unknown_bootoption+0x0/0x216 Oct 10 20:44:25 53577679 kernel: ===================== -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601#c8 Pavel Machek <pavel@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Summary|Start after suspend to disk (hybernation) in |Start after suspend to disk (hibernation) in |10.3RC1 fails. |10.3RC1 fails. --- Comment #8 from Pavel Machek <pavel@novell.com> 2007-10-11 04:06:49 MST --- Why is your kernel tainted: N? Is it still broken in opensuse 10.3 final? can you try it from init=/bin/bash? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601#c11 --- Comment #11 from Antoon Tolboom <atolboo@hotmail.com> 2007-10-12 13:46:45 MST --- can you try it from init=/bin/bash? I do not understand what you mean with this question. Please more info on this. Is it still broken in opensuse 10.3 final? I have installed openSUSE-10.3-GM-DVD-i386 and I am using the KDE desktop. The suspend to disk - start behaviour is more unstable then in the RC1 version. I have performed the test 10 times with the following results: 4 times the the KDE desktop was shown with a slow cursor movement response and a failing Yast launch (no response after supplying the rootpassword) and shutting down the PC ends somewhere in the shutdown procedure. The only thing I could do was to activte the reset button. 6 times the result was as in the first post of this bugreport The screeninfo can be seen in the GM_suspendtodisk attachment. The sysrqinfo can be seen in the Sysrq9p_GM attachment. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601#c10 --- Comment #10 from Antoon Tolboom <atolboo@hotmail.com> 2007-10-12 13:46:02 MST --- Created an attachment (id=178220) --> (https://bugzilla.novell.com/attachment.cgi?id=178220) sysrqGMinfo -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601#c9 --- Comment #9 from Antoon Tolboom <atolboo@hotmail.com> 2007-10-12 13:45:06 MST --- Created an attachment (id=178219) --> (https://bugzilla.novell.com/attachment.cgi?id=178219) GM_suspendtodisk info -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601#c12 --- Comment #12 from Pavel Machek <pavel@novell.com> 2007-10-15 01:31:41 MST --- Thanks for testing. init=/bin/bash... you need to add that onto kernel commandline to test with miminal system. Where did you get "N" taint? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 Pavel Machek <pavel@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO Info Provider| |atolboo@hotmail.com Summary|Start after suspend to disk (hibernation) in |System fails after resume from hibernation in |10.3RC1 fails. |10.3 Version|RC 1 |Final -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601#c13 --- Comment #13 from Antoon Tolboom <atolboo@hotmail.com> 2007-10-18 13:25:43 MST --- Created an attachment (id=179314) --> (https://bugzilla.novell.com/attachment.cgi?id=179314) Behaviour of suspend to disk with no kernelpanic -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601#c14 --- Comment #14 from Antoon Tolboom <atolboo@hotmail.com> 2007-10-18 13:27:05 MST --- Created an attachment (id=179315) --> (https://bugzilla.novell.com/attachment.cgi?id=179315) Behaviour of suspend to disk wit kernelpanic -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601#c15 --- Comment #15 from Antoon Tolboom <atolboo@hotmail.com> 2007-10-18 13:27:41 MST --- With the help of http://www.alleslinux.com/forum/viewtopic.php?t=6307 and http://en.opensuse.org/ACPI_Suspend_debugging I managed to get a minimal system. I did this as follows The default entry in /boot/grub/menu.lst was: title openSUSE 10.3 - 2.6.22.9-0.4 root (hd0,11) kernel /boot/vmlinuz-2.6.22.9-0.4-default root=/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50LYG1G-part12 vga=0x31a resume=/dev/sda2 splash=silent showopts initrd /boot/initrd-2.6.22.9-0.4-default I made a new entry title openSUSE 10.3 - 2.6.22.9-0.4 minimal root (hd0,11) kernel /boot/vmlinuz-2.6.22.9-0.4-default init=/bin/bash initrd /boot/initrd-2.6.22.9-0.4-default and set the new entry as default. Putting the system into suspend to disk and restarting from the suspendmode gives two different behaviours. See attachment suspendtodisk_panic.txt and suspendtodisk_nopanic.txt for the discription. It was not possible to put the system into supendmode for a second time. To repeat the test I had to start in fullsystem(KDE) mode and then in minimalsystem mode. And your question "Where did you get "N" taint?" My answer: This is produced by suse 10.3 GM (DVD)+ all the updates untill today. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 Antoon Tolboom <atolboo@hotmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|pavel@novell.com |kernel-maintainers@forge.provo.novell.com Status|NEEDINFO |NEW Info Provider|atolboo@hotmail.com | -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601#c16 Pavel Machek <pavel@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |pavel@novell.com Status|NEW |ASSIGNED --- Comment #16 from Pavel Machek <pavel@novell.com> 2007-10-19 16:24:26 MST --- (You should not be changing bug ownership). -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 Pavel Machek <pavel@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|kernel-maintainers@forge.provo.novell.com |pavel@novell.com -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601#c17 --- Comment #17 from Jeff Mahoney <jeffm@novell.com> 2007-10-20 13:01:15 MST --- Pavel, the "N" taint means "unsupported." It has no meaning on non-SLE kernels. Most users will have a N tainted kernel without taking any action themselves. If the system is working correctly and loading drivers for their hardware automatically, it will probably end up loading a driver that will carry the N taint. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601#c18 --- Comment #18 from Stefan Seyfried <seife@novell.com> 2007-10-25 05:28:30 MST --- (In reply to comment #12 from Pavel Machek)
Where did you get "N" taint?
The "N" taint is from "unsupported (by Novell) module". It is harmless unless on an enterprise product support call. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601#c19 --- Comment #19 from Pavel Machek <pavel@novell.com> 2007-10-29 02:55:04 MST --- Jeff: Sometimes "N" taint means "lm_sensors", that's why I'm careful :-) The panic from minimal system seems interesting. Did it print anything more between these lines? Call Trace: ======================= Code: f0 5f 60 00 00 8f 10 c0 00 00 f8 00 00 85 00 00 90 60 60 00 00 8f 10 c0 a0 60 60 00 00 8f 10 c0 b0 60 60 00 00 8f 10 c0 c0 60 60 <00> 00 8f 10 c0 00 54 60 00 00 8f 2c c0 c0 51 60 00 00 8e 2c c0 EIP: [<c0378063>] 0xc0378063 SS:ESP 0068:c0389fd8 Kernel panic - not syncing: Attempted to kill the idle task ? I'd need call trace to do anything inteligent :-(. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 Pavel Machek <pavel@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO Info Provider| |atolboo@hotmail.com -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601#c20 Antoon Tolboom <atolboo@hotmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|atolboo@hotmail.com | --- Comment #20 from Antoon Tolboom <atolboo@hotmail.com> 2007-10-29 15:32:29 MST --- No it did not print more lines on my screen. The lines between "c0378063" and "Kernel panic...." are all the lines that showed up on my screen. I did check it again today, and all the values are the same as in the attachment. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601#c21 Pavel Machek <pavel@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO Info Provider| |atolboo@hotmail.com --- Comment #21 from Pavel Machek <pavel@novell.com> 2007-10-30 04:52:43 MST --- What kind of machine is that? Did hibernation ever work for you? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601#c22 Antoon Tolboom <atolboo@hotmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|atolboo@hotmail.com | --- Comment #22 from Antoon Tolboom <atolboo@hotmail.com> 2007-10-30 09:39:56 MST --- The mobo is an ASRock 775Dual-VSTA Motherboard with a Intel Pentium 4 3GHz processor. See http://www.asrock.com/mb/overview.asp?Model=775Dual-VSTA As stated in my first post hibernation to disk in Suse 10.2 was not a problem. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601#c23 --- Comment #23 from Pavel Machek <pavel@novell.com> 2007-11-09 11:22:07 MST --- Ok, can you try to reproduce the problem with vanilla 2.6.23? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601#c24 --- Comment #24 from Antoon Tolboom <atolboo@hotmail.com> 2007-11-10 13:36:13 MST --- You asked to produce the problem with vanilla 2.6.23. The kernelupdate of 08/11/07 gives the 2.6.22.12-0.1-default kernel and not 2.6.23. I did a minimal systemtest with this 2.6.22.12-0.1-default kernel and repeated it 20 times. The result is that the test ended 18 times without a problem. 2 times the result was a kernel panic. After this I did a desktop(KDE) hibernation test and repeated it 5 times. They all failed the same way as in my first report. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601#c25 Pavel Machek <pavel@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO Info Provider| |atolboo@hotmail.com --- Comment #25 from Pavel Machek <pavel@novell.com> 2007-11-19 03:28:51 MST --- Ok, can you lsmod at full system, then boot with minimal system, and try to find out which module breaks it? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601#c27 --- Comment #27 from Antoon Tolboom <atolboo@hotmail.com> 2007-11-21 14:06:09 MST --- Created an attachment (id=184286) --> (https://bugzilla.novell.com/attachment.cgi?id=184286) Lsmod at full system -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601#c28 --- Comment #28 from Antoon Tolboom <atolboo@hotmail.com> 2007-11-21 14:06:45 MST --- Created an attachment (id=184287) --> (https://bugzilla.novell.com/attachment.cgi?id=184287) LSmod at minimal system -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601#c26 --- Comment #26 from Antoon Tolboom <atolboo@hotmail.com> 2007-11-21 14:04:56 MST --- I did a lsmod at full system and at minimal system. I will post them as attachments. I presume one off the modules which is in full system and not in minimal system breaks the system. How can I find the one which I am looking for? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 Stefan Seyfried <seife@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|atolboo@hotmail.com | -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601#c29 Pavel Machek <pavel@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO Info Provider| |atolboo@hotmail.com --- Comment #29 from Pavel Machek <pavel@novell.com> 2007-11-30 15:47:51 MST --- You can binary-search for the module that breaks it. I'd begin with pci_hotplug 33216 1 shpchp Hmm. And you have lm_sensors: i2c_viapro 12436 0 parport_pc 40764 0 i2c_core 27520 1 i2c_viapro Unload them. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User atolboo@hotmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c30 --- Comment #30 from Antoon Tolboom <atolboo@hotmail.com> 2007-12-05 05:14:17 MST --- Through an update I have a new 2.6.22.13-0.3-default kernel. After adding blacklist shpchp blacklist pci_hotplug blacklist i2c_viapro blacklist parport_pc blacklist i2c_core to the /etc/modprobe.conf.local file the modules have disappeared from the lsmodlist. (see attachment Lsmod at full system with unload1) A 20x fullsystem hibernationtest gives the following result: 16x as discribed in my first report (no change). 4x a KDE desktop with or without a working lan interface and a loginprompt when I try to shutdown the PC. In this situation the only way to shutdown the PC is to use the mains switch. After this I tried to blacklist snd_pcm_oss and snd_mixer_oss. As these two snd_.. modules where listed in lsmod after a restart ??? I stop testing for this moment and wait for further instructions. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User atolboo@hotmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c31 --- Comment #31 from Antoon Tolboom <atolboo@hotmail.com> 2007-12-05 05:16:10 MST --- Created an attachment (id=185991) --> (https://bugzilla.novell.com/attachment.cgi?id=185991) Lsmod at full system with unload1 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User atolboo@hotmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c32 Antoon Tolboom <atolboo@hotmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|atolboo@hotmail.com | --- Comment #32 from Antoon Tolboom <atolboo@hotmail.com> 2007-12-17 13:40:21 MST --- Changed NEEDINFO status. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User pavel@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c33 Pavel Machek <pavel@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO Info Provider| |atolboo@hotmail.com --- Comment #33 from Pavel Machek <pavel@novell.com> 2007-12-25 05:37:48 MST --- Ok, try to unload everything you can, perhaps difference is somewhere else than module list. ...also agpgart unloading/not trying from X might be useful. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User atolboo@hotmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c34 --- Comment #34 from Antoon Tolboom <atolboo@hotmail.com> 2007-12-30 04:55:13 MST --- Created an attachment (id=188931) --> (https://bugzilla.novell.com/attachment.cgi?id=188931) Lsmod at full system with unload2 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User atolboo@hotmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c35 Antoon Tolboom <atolboo@hotmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|atolboo@hotmail.com | --- Comment #35 from Antoon Tolboom <atolboo@hotmail.com> 2007-12-30 04:56:28 MST --- The contents of /etc/modprobe.conf.local is now: blacklist shpchp blacklist pci_hotplug blacklist i2c_viapro blacklist parport_pc blacklist i2c_core blacklist via_agp blacklist agpgart See attachment [Lsmod at full system with unload2] for the loaded modules. The behaviour of the fullsystem(KDE) hibernationtest didn't change.(it fails) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User pavel@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c36 Pavel Machek <pavel@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO Info Provider| |atolboo@hotmail.com --- Comment #36 from Pavel Machek <pavel@novell.com> 2008-01-15 03:34:00 MST --- So it mostly suspends with minimal list of modules, and reliably does not with full list, right? Try disabling snd_hda_intel, fuse, via_rhine, pcnet32 (why do you have both?), ehci_hcd, uhci_hcd and see what happens... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User atolboo@hotmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c37 --- Comment #37 from Antoon Tolboom <atolboo@hotmail.com> 2008-01-18 05:53:58 MST --- Created an attachment (id=190987) --> (https://bugzilla.novell.com/attachment.cgi?id=190987) Lsmod at full system with unload3 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User atolboo@hotmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c38 Antoon Tolboom <atolboo@hotmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|atolboo@hotmail.com | --- Comment #38 from Antoon Tolboom <atolboo@hotmail.com> 2008-01-18 05:56:07 MST --- During testing my system was made corrupt. Starting the system always ended in a kernel panic. To solve this problem I had to reinstall the system from DVD+updates. The kernel is now 2.6.22.13-0.3-default (the same as in comment #30). Your question: via_rhine, pcnet32 (why do you have both?) Answer: I have an additional LAN-card installed. The contents of /etc/modprobe.conf.local is now: blacklist shpchp blacklist pci_hotplug blacklist i2c_viapro blacklist parport_pc blacklist i2c_core blacklist via_agp blacklist agpgart blacklist snd_hda_intel blacklist fuse blacklist via_rhine blacklist pcnet32 blacklist ehci_hcd blacklist uhci_hcd See attachment [Lsmod at full system with unload3] for the loaded modules. With this blacklist there is no sound and LAN interface. The behaviour of the hibernationtest didn't change. Minimal systemtest see comment #24 Full(KDE) systemtest see comment #30 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User pavel@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c39 Pavel Machek <pavel@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO Info Provider| |atolboo@hotmail.com --- Comment #39 from Pavel Machek <pavel@novell.com> 2008-01-21 02:15:37 MST --- ..so, even with unload3, it mostly works from minimal system, and mostly breaks from KDE? Are you using FUSE? Does idle=poll (on kernel command line) help? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User atolboo@hotmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c40 Antoon Tolboom <atolboo@hotmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|atolboo@hotmail.com | --- Comment #40 from Antoon Tolboom <atolboo@hotmail.com> 2008-01-21 13:57:26 MST --- ..so, even with unload3, it mostly works from minimal system, and mostly breaks from KDE? Answer: Yes, correct. Are you using FUSE? Answer: A search=fuse in Yast>Software Management shows that libfuse2 and ntfs-3g are installed. Does idle=poll (on kernel command line) help? I added idle=poll at the end of the kernel command line in /boot/grub/menu.lst. A 5x Full(KDE) systemhibernationtest all failed. This doesn't change anything. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User pavel@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c41 --- Comment #41 from Pavel Machek <pavel@novell.com> 2008-01-28 04:40:35 MST --- Ok, so more tests... boot full KDE, then init 3 to get back to minimal system. Will suspend work? boot full kde, but then switch to text console, and try if suspend works? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User atolboo@hotmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c42 --- Comment #42 from Antoon Tolboom <atolboo@hotmail.com> 2008-01-28 14:04:56 MST --- After a start of KDE I start a Root-konsole (+rootpassword) and give the command 'init 3' KDE is closed and the following screen appears. . . Starting CRON daemon done Starting smartd done Starting Firewall Initialization (phase 2 of 2).......... done done Master Recource Control: runlevel 5 has beeb reached Failed services in runlevel5: network Welcome to openSUSE 10.3 (i586) - Kernel 2.6.22.13-0.3-default (tty1). linux-cmi2 login: atolboo Wachtwoord: Laatste keer aangemeld: ma jan 28 20:35:04 CET van console op :0 Have a lot of fun... atolboo@linux-cmi2:~> su Wachtwoord: linux-cmi2:/home/atolboo # echo disk > /sys/power/state The PC goes into hibernation now and the power is switched off. After pushing the powerbutton the blue screen 'Resume From Hibernation' and the Grubscreen appears and the image data pages are loaded. It ends with the following screen. . . Laatste keer aangemeld: ma jan 28 20:35:04 CET van console op :0 Have a lot of fun... atolboo@linux-cmi2:~> su Wachtwoord: linux-cmi2:/home/atolboo # echo disk > /sys/power/state linux-cmi2:/home/atolboo # In order to restart into KDE I give the command 'reboot -f'. I tested the above 10x with the same (above) result. So suspend from int 3 works. Is this also what you mean with 'switch to text console...'? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User pavel@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c43 --- Comment #43 from Pavel Machek <pavel@novell.com> 2008-02-02 05:21:12 MST --- Ok, so suspend works for init 3. Next test: can you leave KDE running, press ctrl-alt-F1 to get to the text console, and hibernate from there? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User atolboo@hotmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c44 --- Comment #44 from Antoon Tolboom <atolboo@hotmail.com> 2008-02-02 14:30:17 MST --- Suspend from ctrl+alt+F1 also works. I have tested this 10 times with good results. The blacklist is still the same as in Comment #38. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User pavel@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c45 Pavel Machek <pavel@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO Info Provider| |atolboo@hotmail.com --- Comment #45 from Pavel Machek <pavel@novell.com> 2008-02-05 10:51:34 MST --- Ok, lets try from ctrl-alt-f1, but w/o the blacklist. But this is very strange. suspend code internally switches to console 1, anyway. Is splash screen interfering? Or is it some weird X problem? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User atolboo@hotmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c46 Antoon Tolboom <atolboo@hotmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|atolboo@hotmail.com | --- Comment #46 from Antoon Tolboom <atolboo@hotmail.com> 2008-02-06 06:51:02 MST --- ctrl+alt+F1 with an empty blacklist in /etc/modprobe.conf.local gives the same behaviour as in comment #44 (no change) Instead of using ctrl+alt+F1 I have done the same test in a userKonsole. In KDE I open a userKonsole. atolboo@linux-cmi2:~> su Wachtwoord: linux-cmi2:/home/atolboo # echo disk > /sys/power/state And the PC goes into hibernation. After a restart KDE appears including the userKonsole with the contents: atolboo@linux-cmi2:~> su Wachtwoord: linux-cmi2:/home/atolboo # echo disk > /sys/power/state linux-cmi2:/home/atolboo # linux-cmi2:/home/atolboo # And I can open and close my home directory with Konqueror. The response of the cursormovement is not smooth (shacky). I can do a restart with 'reboot -f' in the userKonsole. When I try to reboot in Kmenu>Log out...>Restart Computer I get a init 3 screen (see comment #42) So this works more or less but it is not 100% OK. I repeated this test 10 times with the same above result. I hope this gives more lights on the problem (and maybe a solution). -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User pavel@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c47 Pavel Machek <pavel@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO Info Provider| |atolboo@hotmail.com --- Comment #47 from Pavel Machek <pavel@novell.com> 2008-02-06 14:51:32 MST --- Lets declare slowness a separate problem. nohz=off highres=off might help there. So echo disk > /sys/power/state from shell works... Can you try powersave -U from root shell? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User atolboo@hotmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c48 Antoon Tolboom <atolboo@hotmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|atolboo@hotmail.com | --- Comment #48 from Antoon Tolboom <atolboo@hotmail.com> 2008-02-07 05:10:26 MST --- Addition to comment #46: Besides the cursormovemennt I had a failing launch of Yast (no response after supplying the rootpassword). A 'powersave -U' from root-shell gives the same behaviour as in my first description (it fails). I tested this 5 times. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User aaragoneses@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c49 Andrés G. Aragoneses <aaragoneses@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |aaragoneses@novell.com --- Comment #49 from Andrés G. Aragoneses <aaragoneses@novell.com> 2008-03-13 07:01:30 MST --- Hello, I recently got a new Lenovo Thinkpad T61P and I'm experiencing the behaviour explained in the summary of this bug ("System fails after resume from hibernation in 10.3"). How do you guys think that I should proceed now? Should I create a new bug for my case or stick to this one? How could I provide debugging information to you? Please let me know anything I should do in order to help with this issue. Thanks! -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User pavel@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c50 --- Comment #50 from Pavel Machek <pavel@novell.com> 2008-03-16 03:36:47 MST --- Andres: new bug, please. We have thinkpads around here, so that one should be easier to deal with. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User pavel@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c51 --- Comment #51 from Pavel Machek <pavel@novell.com> 2008-03-22 17:14:31 MST --- Stefan, can you help here? It mostly works with echo disk, breaks with powersave -U. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User aaragoneses@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c52 --- Comment #52 from Andrés G. Aragoneses <aaragoneses@novell.com> 2008-03-23 11:22:34 MST --- Pavel: thanks for your answer, I created bug 373189. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 Pavel Machek <pavel@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO Info Provider| |seife@novell.com -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User seife@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c53 Stefan Seyfried <seife@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Info Provider|seife@novell.com |atolboo@hotmail.com --- Comment #53 from Stefan Seyfried <seife@novell.com> 2008-04-01 09:09:29 MST --- Ok. Antoon, could you please try if it works with "powersave -U" after you have created a file /etc/pm/config.d/config with the content HIBERNATE_METHOD="kernel" This will find out if the method used is actually to blame or if it is something we are doing around suspend in pm-utils. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User atolboo@hotmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c54 Antoon Tolboom <atolboo@hotmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|atolboo@hotmail.com | --- Comment #54 from Antoon Tolboom <atolboo@hotmail.com> 2008-04-02 07:25:04 MST --- Before trying the /etc/pm/config.d/config file I retested the "'powersave -U' from root-shell" (comment #48). To my surprise the behaviour from my first description could not be reproduced (see also comment #48). I tested this 5 times. Going into hibernation the ZZ screen with the progressionbar stops at 15% from the right, and the powerled stays on. After activating the reset button (this is the only possibility) a normal coldstart is performed (no blue 'Resume from Hibernation' screen). On this PC I still have Suse 10.2 with kernel 2.6.18.8-0.9-default (I will not remove this as long as this bug is open). To exclude behaviourchange with hardware I retested hibernation with 10.2. a number(5x?) of times It passed without any problems. I decided to do a new 10.3 installation from DVD + all updates. The kernel has now changed from 2.6.22.13-0.3-default (comment #42) to 2.6.22.17-0.1-default The hibernation behaviour is still the above mentioned '15% progressionbar ZZ' screen. Tested 5 times. After this I modified /boot/grub/menu.lst (see comment #15) to do a minimal systemtest. The result is the same as in attachment 'Behaviour of suspend to disk with no kernelpanic' (including the attempt to put it into hibernation for the second time). In comment #15 I wrote: To repeat the test I had to start in fullsystem(KDE) mode and then in minimalsystem mode. But not this time. It always (minimal and KDE-mode) ends with: Waiting for device /dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50LYG1G-part12 to appear: ok fsck 1.40.2 (12-Jul-2007) [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50LYG1G-part12 SUSE10.3GM (/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50LYG1G-part12: recovering journal SUSE10.3GM (/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50LYG1G-part12: clean, 128880/669120 files, 785072/1337403 blocks fsck succeeded. Mounting root device read-write. Mounting root /dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50LYG1G-part12 kjournald starting. Commit interval 5 seconds EXT3 FS on sda12, internal journal EXT3-fs: mounted filesystem with ordered data mode. /bin/run-init: /bin/sh: Permission denied Kernel panic - not syncing: Attempted to kill init! And I am not able to end this 'Kernel panic' situation. Is there a way to end this situation? I will do a new installation and then apply the /etc/pm/config.d/config file and restart testing. I hope I do not have to do a new installation every time I get in a 'Kernel panic' situation. So the behaviour has changed and gone from bad to worse. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User atolboo@hotmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c55 --- Comment #55 from Antoon Tolboom <atolboo@hotmail.com> 2008-04-02 14:29:03 MST --- After a new installation the behaviour is still the same as in comment #54. After installing the /etc/pm/config.d/config file from comment #53 the behaviour of "'powersave -U' from root-shell" is as follows: The KDE-desktop is replaced with the following lines on the screen. Preparing hibernate... Stopping tasks ... done. Shrinking memory... done (0 pages freed) Freed 0 kbytes in 0.03 seconds (0.00 MB/s) Suspending console(s) The powerled stays on. After activating the reset button a normal coldstart (with 0 seconds Grub delay time and no blue 'Resume from Hibernation' screen) is performed. The behaviour of the minimal system test is the same as in comment #54. To avoid the 'Kernel panic' situation I do a full KDE cycle in between the minimal system tests. I finish the minimal system test with reboot -f. The first KDE statup ends with: Read 25772 kbytes in 0.47 seconds (54.83 MB/s) Suspending console(s) A second KDE cycle is succesfull and I can do the next minimal system test without a 'Kernel panic' situation. So a minimal system test is succesfull in hibernation. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User pavel@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c56 --- Comment #56 from Pavel Machek <pavel@novell.com> 2008-04-17 07:37:21 MST --- So hibernation works from minimal system, and is broken from KDE. Can you try to find out what exactly matters? I believe we went through module lists and there was nothing really suspect. Can you try starting just the Xserver if maybe that breaks the hibernation? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User atolboo@hotmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c57 --- Comment #57 from Antoon Tolboom <atolboo@hotmail.com> 2008-04-24 12:40:48 MST --- Your question: Can you try starting just the Xserver if maybe that breaks the hibernation? How can I do that? I know how to start with minimal system and full KDE-system. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User seife@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c58 --- Comment #58 from Stefan Seyfried <seife@novell.com> 2008-04-25 01:07:14 MST --- one way would probably be (i have not tested that now, it's from memory): boot into text mode, by adding the number "3" to the boot commandline log in as root on the text console start the X server like that: X :0 & wait until the X server starts up empty, switch back to text console with ctrl-alt-f1 start an xterm DISPLAY=:0 xterm switch back to X with alt-f7, you should have a terminal window, nothing else. In that terminal window, type either "powersave -U" or plain "pm-hibernate". This should give you suspend to disk from an as minimal X setup as possible. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User atolboo@hotmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c59 --- Comment #59 from Antoon Tolboom <atolboo@hotmail.com> 2008-04-25 14:07:06 MST --- First let me say that there is nothing wrong with your memory. Everything is as you wrote down in comment #58. After I enter 'powersave -U' or 'pm-hibernate' in the terminal window the following happens: The X server with the terminal window disapppears and the following text appears on the monitor. Preparing hibernate... Stopping tasks ... done. Shrinking memory... done (0 pages freed) Freed 0 kbytes in 0.03 seconds (0.00 NB/s) Suspending console(s) The monitor and powerled of the PC stay ON. I can only push the reset button to start again. I performed the above test 5x with the same result. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User pavel@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c60 Pavel Machek <pavel@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO Info Provider| |atolboo@hotmail.com --- Comment #60 from Pavel Machek <pavel@novell.com> 2008-05-20 01:42:04 MST --- Could you try opensuse 11? There's good chance it is fixed there. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User atolboo@hotmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c61 Antoon Tolboom <atolboo@hotmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|atolboo@hotmail.com | --- Comment #61 from Antoon Tolboom <atolboo@hotmail.com> 2008-05-20 13:15:32 MST --- When I give Suspend to Disk in Kpowersave I get a "Error while prepare Suspend to Disk - KPowersave" popup screen with: Could not umount extereal media before suspend/standby. (Reason: Could not call DCOP interface to umount external media.) Would you like to continue suspend/standby anyway? (Warning: Continue suspend can cause data loss!) After selecting [Suspend anyway] a "Error while Suspend to Disk - Kpowersave" popup screen with: An unknown error occurred while Suspend to Disk. The errorcode is: '1' There is NO external media connected to the computer. When I open a konsole and become root(su) and give "powersave -U' the response is 'Suspend to disk request sent.' And nothing is happening. opensuse 11.0 beta3 refuses to go into suspend to disk. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User seife@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c62 --- Comment #62 from Stefan Seyfried <seife@novell.com> 2008-05-20 17:17:48 MST --- This is probably bug https://bugzilla.novell.com/show_bug.cgi?id=386969 You need to add your swap partition to fstab if you installed from the live-cd. After adding swap to fstab and rebooting, suspend to disk should work. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User atolboo@hotmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c63 --- Comment #63 from Antoon Tolboom <atolboo@hotmail.com> 2008-05-21 02:46:25 MST --- After adding swap to fstab I still get the "Error while prepare Suspend to Disk - KPowersave" popup screen. After selecting [Suspend anyway] the pc goes into hibernation and the ZZ screen appears with the progressionbar which stops at 15% from the right, and the powerled stays on. After activating the reset button (this is the only possibility) a normal coldstart is performed (no blue 'Resume from Hibernation' screen). The behaviour is the same as in comment #54 (with 10.3). With 'powersave -U' I get the same ZZ screen. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User seife@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c64 --- Comment #64 from Stefan Seyfried <seife@novell.com> 2008-05-22 05:10:31 MST --- (In reply to comment #63 from Antoon Tolboom)
After adding swap to fstab I still get the "Error while prepare Suspend to Disk - KPowersave" popup screen.
Ok. This seems to be a different bug, i'd ask you to file a separate report for that (mixing up issues in one report will make things harder to understand for everyone)
After selecting [Suspend anyway] the pc goes into hibernation and the ZZ screen appears with the progressionbar which stops at 15% from the right, and the powerled stays on. After activating the reset button (this is the only possibility) a normal coldstart is performed (no blue 'Resume from Hibernation' screen). The behaviour is the same as in comment #54 (with 10.3). With 'powersave -U' I get the same ZZ screen.
Bad :-( Please try the following: become root, then issue the following command: echo "splash = n" >> /etc/suspend.conf This will make the ZZ screen go away and you will see some text, which might give us hints where the problem is. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User atolboo@hotmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c65 --- Comment #65 from Antoon Tolboom <atolboo@hotmail.com> 2008-05-22 09:52:07 MST --- Output on monitor: type=1505 audit(1211468511.210:2): operation="profile_load" name="/bib/ping" name2="default" pid=1524 type=1505 audit(1211468511.282:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1543 type=1505 audit(1211468511.318:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1544 type=1505 audit(1211468511.354:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1545 type=1505 audit(1211468511.398:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1546 type=1505 audit(1211468511.430:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1547 type=1505 audit(1211468511.466:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1548 type=1505 audit(1211468511.502:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1549 type=1505 audit(1211468511.574:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1550 type=1505 audit(1211468511.670:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=1569 IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk> NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team powernow: This module only works with AMD K7 CPUs ip_tables: (C) 2000-2006 Netfilter Core Team BIOS EDD facility v0.16 2004-Jun-25, 6 devices found nf_conntrack version 0.5.0 (16384 buckets, 65536 max) May 22 17:01:57 linux network: NetworkManagerDispatcher is not installed, skipping it. Please set May 22 17:01:57 linux network: /etc/sysconfig/network/config:NetworkManagerDispatcher=no or install NetworkManagerDispatcher. May 22 17:05:49 linux dhclient: receive_packet failed on eth0: Network is down s2disk: Snapshotting system -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User pavel@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c66 --- Comment #66 from Pavel Machek <pavel@novell.com> 2008-05-26 01:57:22 MDT --- How much memory does affected machine have, btw? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User atolboo@hotmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c67 --- Comment #67 from Antoon Tolboom <atolboo@hotmail.com> 2008-05-26 03:18:27 MDT ---
From My Computer:
Total memory(RAM): 1,011.4MB Free memory: 657.7MB (+158.6MB Caches) Free swap: 1.9GB -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User pavel@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c68 Pavel Machek <pavel@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |RESOLVED Resolution| |WONTFIX --- Comment #68 from Pavel Machek <pavel@novell.com> 2008-06-20 04:05:58 MDT --- Can you try opensuse 11.0 final? Hopefully problem will be gone there. (Sorry, there's no obvious solution, and no easy way to debug this without the hardware). -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=327601 User atolboo@hotmail.com added comment https://bugzilla.novell.com/show_bug.cgi?id=327601#c69 --- Comment #69 from Antoon Tolboom <atolboo@hotmail.com> 2008-06-25 04:00:14 MDT --- The behaviour of opensuse 11.0 final is the same as in Comment #63 After selecting [Suspend to disk] the pc goes into hibernation and the ZZ screen appears with the progressionbar which stops at 15% from the right, and the powerled stays on. After activating the reset button (this is the only possibility) a normal coldstart is performed (no blue 'Resume from Hibernation' screen). The behaviour is the same as in comment #54 (with 10.3). -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
participants (1)
-
bugzilla_noreply＠novell.com