[Bug 822884] New: System freezes when trying to install DVB-S card Kworld dvb-s
https://bugzilla.novell.com/show_bug.cgi?id=822884 https://bugzilla.novell.com/show_bug.cgi?id=822884#c0 Summary: System freezes when trying to install DVB-S card Kworld dvb-s Classification: openSUSE Product: openSUSE Factory Version: 13.1 Milestone 0 Platform: x86-64 OS/Version: openSUSE 12.3 Status: NEW Severity: Critical Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers@forge.provo.novell.com ReportedBy: mistr@online.de QAContact: qa-bugs@suse.de Found By: --- Blocker: --- User-Agent: Opera/9.80 (X11; Linux x86_64) Presto/2.12.388 Version/12.15 During installation the system reported kernel-panic and froze by konfiguration of the tv-card. I then unplugged the card and could finish the installation. After installation i plugged the the card in and the system boots. When i try to configure the tv card with yast the system freezes, i can only reboot by powering off the machine. Reproducible: Always Steps to Reproduce: 1.konfiguring the card with yast 2.pc freezes 3.power off -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=822884
https://bugzilla.novell.com/show_bug.cgi?id=822884#c1
Jeff Mahoney
https://bugzilla.novell.com/show_bug.cgi?id=822884
https://bugzilla.novell.com/show_bug.cgi?id=822884#c2
--- Comment #2 from Michael Steinhauser
Can you provide logs for the panic?
I had installed the nvidia-drivers and uninstalled them. (with yast). After that i could not start the Xserver anymore. So i did a new installation. This is what i got in var/log/warn: 013-07-17T07:24:25.454598+02:00 linux kernel: [ 0.000000] ACPI: RSDP 00000000000fa560 00014 (v00 AMI ) 2013-07-17T07:24:25.454600+02:00 linux kernel: [ 0.000000] ACPI: RSDT 000000007fff0000 0002C (v01 AMIINT VIA_K8 00000010 MSFT 00000097) 2013-07-17T07:24:25.454602+02:00 linux kernel: [ 0.000000] ACPI: FACP 000000007fff0030 00081 (v01 AMIINT VIA_K8 00000011 MSFT 00000097) 2013-07-17T07:24:25.454604+02:00 linux kernel: [ 0.000000] ACPI: DSDT 000000007fff0120 03521 (v01 VIA VIA_K8 00001000 MSFT 0100000D) 2013-07-17T07:24:25.454609+02:00 linux kernel: [ 0.000000] ACPI: FACS 000000007fff8000 00040 2013-07-17T07:24:25.454611+02:00 linux kernel: [ 0.000000] ACPI: APIC 000000007fff00c0 00054 (v01 AMIINT VIA_K8 00000009 MSFT 00000097) 2013-07-17T07:24:25.454630+02:00 linux kernel: [ 0.000000] Zone ranges: 2013-07-17T07:24:25.454632+02:00 linux kernel: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] 2013-07-17T07:24:25.454634+02:00 linux kernel: [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] 2013-07-17T07:24:25.454635+02:00 linux kernel: [ 0.000000] Normal empty 2013-07-17T07:24:25.454637+02:00 linux kernel: [ 0.000000] Movable zone start for each node 2013-07-17T07:24:25.454644+02:00 linux kernel: [ 0.000000] Early memory node ranges 2013-07-17T07:24:25.454646+02:00 linux kernel: [ 0.000000] node 0: [mem 0x00010000-0x0009efff] 2013-07-17T07:24:25.454648+02:00 linux kernel: [ 0.000000] node 0: [mem 0x00100000-0x7ffeffff] 2013-07-17T07:24:25.454722+02:00 linux kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516985 2013-07-17T07:24:25.454723+02:00 linux kernel: [ 0.000000] Policy zone: DMA32 2013-07-17T07:24:25.455210+02:00 linux kernel: [ 0.044132] pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. 2013-07-17T07:24:25.655441+02:00 linux kernel: [ 0.639245] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 2013-07-17T07:24:25.655998+02:00 linux kernel: [ 2.530479] ata4.00: limited to UDMA/33 due to 40-wire cable 2013-07-17T07:24:25.656316+02:00 linux kernel: [ 10.164410] ACPI Warning: 0x0000000000000400-0x0000000000000407 SystemIO conflicts with Region \SMOV 1 (20120913/utaddress-251) 2013-07-17T07:24:25.656353+02:00 linux kernel: [ 10.330506] sr0: scsi3-mmc drive: 125x/48x writer dvd-ram cd/rw xa/form2 cdda tray 2013-07-17T07:24:25.656378+02:00 linux kernel: [ 10.559686] microcode: AMD CPU family 0xf not supported 2013-07-17T07:24:25.656384+02:00 linux kernel: [ 10.649545] wm8775 3-001b: I2C: cannot write 000 to register R23 2013-07-17T07:24:25.656386+02:00 linux kernel: [ 10.654176] wm8775 3-001b: I2C: cannot write 000 to register R7 2013-07-17T07:24:25.656398+02:00 linux kernel: [ 10.658958] wm8775 3-001b: I2C: cannot write 021 to register R11 2013-07-17T07:24:25.656400+02:00 linux kernel: [ 10.663547] wm8775 3-001b: I2C: cannot write 102 to register R12 2013-07-17T07:24:25.656402+02:00 linux kernel: [ 10.669221] wm8775 3-001b: I2C: cannot write 000 to register R13 2013-07-17T07:24:25.656404+02:00 linux kernel: [ 10.673526] wm8775 3-001b: I2C: cannot write 1d4 to register R14 2013-07-17T07:24:25.656406+02:00 linux kernel: [ 10.678186] wm8775 3-001b: I2C: cannot write 1d4 to register R15 2013-07-17T07:24:25.656413+02:00 linux kernel: [ 10.683073] wm8775 3-001b: I2C: cannot write 1bf to register R16 2013-07-17T07:24:25.656418+02:00 linux kernel: [ 10.688781] wm8775 3-001b: I2C: cannot write 185 to register R17 2013-07-17T07:24:25.656420+02:00 linux kernel: [ 10.692357] wm8775 3-001b: I2C: cannot write 0a2 to register R18 2013-07-17T07:24:25.656421+02:00 linux kernel: [ 10.694626] wm8775 3-001b: I2C: cannot write 005 to register R19 2013-07-17T07:24:25.656423+02:00 linux kernel: [ 10.696830] wm8775 3-001b: I2C: cannot write 07a to register R20 2013-07-17T07:24:25.656425+02:00 linux kernel: [ 10.699209] wm8775 3-001b: I2C: cannot write 102 to register R21 2013-07-17T07:24:25.656432+02:00 linux kernel: [ 10.701468] wm8775 3-001b: I2C: cannot write 0c2 to register R21 2013-07-17T07:24:25.656435+02:00 linux kernel: [ 10.703665] wm8775 3-001b: I2C: cannot write 1cf to register R14 2013-07-17T07:24:25.656437+02:00 linux kernel: [ 10.706803] wm8775 3-001b: I2C: cannot write 1cf to register R15 2013-07-17T07:24:25.656438+02:00 linux kernel: [ 10.709095] wm8775 3-001b: I2C: cannot write 0c2 to register R21 2013-07-17T07:24:25.656440+02:00 linux kernel: [ 10.714512] wm8775 3-001b: I2C: cannot write 1cf to register R14 2013-07-17T07:24:25.656441+02:00 linux kernel: [ 10.716821] wm8775 3-001b: I2C: cannot write 1cf to register R15 2013-07-17T07:24:25.656443+02:00 linux kernel: [ 10.719919] wm8775 3-001b: I2C: cannot write 0c2 to register R21 2013-07-17T07:24:25.656452+02:00 linux kernel: [ 10.722764] wm8775 3-001b: I2C: cannot write 1cf to register R14 2013-07-17T07:24:25.656455+02:00 linux kernel: [ 10.726060] wm8775 3-001b: I2C: cannot write 1cf to register R15 2013-07-17T07:24:25.656457+02:00 linux kernel: [ 10.728340] wm8775 3-001b: I2C: cannot write 0c2 to register R21 2013-07-17T07:24:25.656459+02:00 linux kernel: [ 10.730544] wm8775 3-001b: I2C: cannot write 1cf to register R14 2013-07-17T07:24:25.656460+02:00 linux kernel: [ 10.733061] wm8775 3-001b: I2C: cannot write 1cf to register R15 2013-07-17T07:24:25.656472+02:00 linux kernel: [ 10.737049] cx88[0]/2: cx2388x 8802 Driver Manager 2013-07-17T07:24:25.656559+02:00 linux kernel: [ 14.405064] EXT4-fs (sda7): warning: checktime reached, running e2fsck is recommended 2013-07-17T07:24:28.343750+02:00 linux bluetoothd[423]: Parsing /etc/bluetooth/input.conf failed: No such file or directory 2013-07-17T07:24:28.373882+02:00 linux bluetoothd[423]: Parsing /etc/bluetooth/audio.conf failed: No such file or directory 2013-07-17T07:24:28.884896+02:00 linux bluetoothd[423]: Parsing /etc/bluetooth/serial.conf failed: No such file or directory 2013-07-17T07:24:29.212750+02:00 linux bluetoothd[423]: Could not get the contents of DMI chassis type 2013-07-17T07:24:45.135920+02:00 linux kernel: [ 36.323617] YaST2.call (1519): /proc/1980/oom_adj is deprecated, please use /proc/1980/oom_score_adj instead. 2013-07-17T07:25:58.368044+02:00 linux postfix/postfix-script[2557]: fatal: the Postfix mail system is not running 2013-07-17T07:26:05.777765+02:00 linux postfix/postfix-script[3622]: fatal: the Postfix mail system is not running If you tell me how i can log the kernel or how i can provide more info i will do it -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=822884
https://bugzilla.novell.com/show_bug.cgi?id=822884#c3
Borislav Petkov
participants (1)
-
bugzilla_noreply@novell.com