http://bugzilla.opensuse.org/show_bug.cgi?id=1177273 Bug ID: 1177273 Summary: Update to wicked 0.6.63 to 0.6.64 breaks tap0 Classification: openSUSE Product: openSUSE Tumbleweed Version: Current Hardware: x86-64 OS: openSUSE Tumbleweed Status: NEW Severity: Normal Priority: P5 - None Component: Network Assignee: screening-team-bugs@suse.de Reporter: malcolmlewis@cableone.net QA Contact: qa-bugs@suse.de Found By: --- Blocker: --- Hi After updating to the 20201002 snapshot breaks my qemu script to bring up the tap0 interface on all my qemu machines using ipv4. ip link show 1: lo: mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1500 qdisc pfifo_fast master br0 state UP mode DEFAULT group default qlen 1000 link/ether dc:fe:07:51:20:cf brd ff:ff:ff:ff:ff:ff altname eno2 altname enp0s25 3: eth1: mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether dc:fe:07:51:20:ce brd ff:ff:ff:ff:ff:ff altname eno1 altname enp7s0 4: br0: mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether ea:d8:2c:fb:75:3c brd ff:ff:ff:ff:ff:ff 5: tap0: mtu 1500 qdisc pfifo_fast master br0 state DOWN mode DEFAULT group default qlen 1000 link/ether 42:2a:af:7f:84:ee brd ff:ff:ff:ff:ff:ff Portion of qemu script used for interface; -nic tap,ifname=tap0,script=no,downscript=no cat /etc/sysctl.d/98-grover.conf #Set up tap/bridge net.ipv4.conf.tap0.proxy_arp=1 net.ipv4.ip_forward=1 Reverting wicked and wicked-service to version 0.6.63-1.4 results in tap0 coming up with the qemu machine. -- You are receiving this mail because: You are on the CC list for the bug.