https://bugzilla.novell.com/show_bug.cgi?id=341290#c1 Summary: manual installation (with new 2.6.24-rc2-4-default) hangs during e1000 load Product: openSUSE 11.0 Version: unspecified Platform: x86-64 OS/Version: openSUSE 11.0 Status: NEW Severity: Critical Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: harbaugh@ncifcrf.gov QAContact: jsrain@novell.com Found By: Beta-Customer attempted manual installation. All went fine until load of e1000 module, which causes install to hang: Loading linux.............................. Loading initrd................................................................................................................................................................................................................................................. Re..y. [ 0.000000] Linux version 2.6.24-rc2-4-default (geeko@buildhost) (gcc version 4.3.0 20071016 (experimental) [trunk revision 129378] (SUSE Linux) ) #1 SMP 2007/11/08 16:31:10 UTC [ 0.000000] Command line: initrd=initrd linemode=1 console=ttyS1,115200n8 withiscsi=1 manual=2 splash=silent showopts BOOT_I [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000098c00 (usable) [ 0.000000] BIOS-e820: 0000000000098c00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff60000 (usable) [ 0.000000] BIOS-e820: 00000000cff60000 - 00000000cff69000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff69000 - 00000000cff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable) [ 0.000000] end_pfn_map = 2293760 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F5E80, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT CFF63603, 003C (r1 PTLTD RSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP CFF68E48, 0074 (r1 INTEL TUMWATER 6040000 PTL 3) [ 0.000000] ACPI: DSDT CFF64A44, 4404 (r1 Intel BLAKFORD 6040000 MSFT 100000E) [ 0.000000] ACPI: FACS CFF69FC0, 0040 [ 0.000000] ACPI: APIC CFF68EBC, 0090 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: MCFG CFF68F4C, 003C (r1 PTLTD MCFG 6040000 LTP 0) [ 0.000000] ACPI: BOOT CFF68F88, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SPCR CFF68FB0, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1) [ 0.000000] ACPI: SSDT CFF6363F, 1405 (r1 PmRef CpuPm 3000 INTL 20050228) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000230000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 2293760 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 152 [ 0.000000] 0: 256 -> 851808 [ 0.000000] 0: 1048576 -> 2293760 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) [ 0.000000] Processor #6 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) [ 0.000000] Processor #7 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, address 0xfec80000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 0000000000098000 - 0000000000099000 [ 0.000000] swsusp: Registered nosave memory region: 0000000000099000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000e4000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000 [ 0.000000] swsusp: Registered nosave memory region: 00000000cff60000 - 00000000cff69000 [ 0.000000] swsusp: Registered nosave memory region: 00000000cff69000 - 00000000cff80000 [ 0.000000] swsusp: Registered nosave memory region: 00000000cff80000 - 00000000d0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000d0000000 - 00000000e0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fec00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec10000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fec10000 - 00000000fee00000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000 [ 0.000000] swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ff000000 [ 0.000000] swsusp: Registered nosave memory region: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 46688 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064063 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: initrd=initrd linemode=1 console=ttyS1,115200n8 withiscsi=1 manual=2 splash=silent showopts BOOT_I [ 0.000000] bootsplash: silent mode. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PM_TIMER [ 107.577625] time.c: Detected 2000.000 MHz processor. [ 107.584089] Console: colour VGA+ 80x25 [ 107.584107] console [ttyS1] enabled [ 108.142290] Checking aperture... [ 108.145532] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 108.181665] Placing software IO TLB between 0x107b000 - 0x507b000 [ 108.256570] Memory: 8174544k/9175040k available (2192k kernel code, 213008k reserved, 1087k data, 328k init) [ 108.343658] Calibrating delay using timer specific routine.. 4003.24 BogoMIPS (lpj=8006487) [ 108.352084] Security Framework initialized [ 108.356191] AppArmor: AppArmor initialized [ 108.360290] AppArmor: Unable to log event (1505) to audit subsys [ 108.366298] AppArmor: Registered secondary security module name="capability" [ 108.373342] AppArmor: Unable to log event (1505) to audit subsys [ 108.379347] Capability LSM initialized as secondary [ 108.385397] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 108.397173] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)[ 108.406260] Mount-cache hash table entries: 256 [ 108.411108] CPU: L1 I cache: 32K, L1 D cache: 32K [ 108.415842] CPU: L2 cache: 4096K [ 108.419070] CPU 0/0 -> Node 0 [ 108.422040] using mwait in idle threads. [ 108.425965] CPU: Physical Processor ID: 0 [ 108.429977] CPU: Processor Core ID: 0 [ 108.433662] SMP alternatives: switching to UP code [ 108.439218] Unpacking initramfs... done [ 109.104770] Freeing initrd memory: 15246k freed [ 109.116323] ACPI: Core revision 20070126 [ 109.122029] Parsing all Control Methods: [ 109.125838] Table [DSDT](id 0001) - 423 Objects with 47 Devices 131 Methods 22 Regions [ 109.134145] Parsing all Control Methods: [ 109.137943] Table [SSDT](id 0002) - 43 Objects with 0 Devices 16 Methods 0 Regions [ 109.145698] tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired [ 109.533171] evxfevnt-0091 [00] enable : Transition to ACPI mode successful [ 109.582097] Using local APIC timer interrupts. [ 109.636544] Detected 20.833 MHz APIC timer. [ 109.640838] SMP alternatives: switching to SMP code [ 109.646413] Booting processor 1/4 APIC 0x6 [ 109.660934] Initializing CPU#1 [ 109.740736] Calibrating delay using timer specific routine.. 4000.09 BogoMIPS (lpj=8000183) [ 109.740743] CPU: L1 I cache: 32K, L1 D cache: 32K [ 109.740745] CPU: L2 cache: 4096K [ 109.740747] CPU 1/6 -> Node 0 [ 109.740748] CPU: Physical Processor ID: 3 [ 109.740749] CPU: Processor Core ID: 0 [ 109.740756] CPU1: Thermal monitoring enabled (TM2) [ 109.741254] Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06 [ 109.741341] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 109.922835] SMP alternatives: switching to SMP code [ 109.928118] Booting processor 2/4 APIC 0x1 [ 109.942872] Initializing CPU#2 [ 110.020735] Calibrating delay using timer specific routine.. 4000.09 BogoMIPS (lpj=8000186) [ 110.020742] CPU: L1 I cache: 32K, L1 D cache: 32K [ 110.020743] CPU: L2 cache: 4096K [ 110.020746] CPU 2/1 -> Node 0 [ 110.020747] CPU: Physical Processor ID: 0 [ 110.020748] CPU: Processor Core ID: 1 [ 110.020754] CPU2: Thermal monitoring enabled (TM2) [ 110.021252] Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06 [ 110.021340] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 110.089045] SMP alternatives: switching to SMP code [ 110.094619] Booting processor 3/4 APIC 0x7 [ 110.109142] Initializing CPU#3 [ 110.276734] Calibrating delay using timer specific routine.. 4000.09 BogoMIPS (lpj=8000182) [ 110.276741] CPU: L1 I cache: 32K, L1 D cache: 32K [ 110.276743] CPU: L2 cache: 4096K [ 110.276745] CPU 3/7 -> Node 0 [ 110.276746] CPU: Physical Processor ID: 3 [ 110.276747] CPU: Processor Core ID: 1 [ 110.276754] CPU3: Thermal monitoring enabled (TM2) [ 110.277251] Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06 [ 110.277265] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 110.344844] Brought up 4 CPUs [ 110.348312] net_namespace: 120 bytes [ 110.352285] NET: Registered protocol family 16 [ 110.356928] ACPI: bus type pci registered [ 110.362015] PCI: Using MMCONFIG at e0000000 - e0afffff [ 110.367452] PCI: No mmconfig possible on device 0b:01 [ 110.372525] PCI: No mmconfig possible on device 0b:02 [ 110.378837] evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 [ 110.387597] evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 0 Runtime GPEs in this block [ 110.398714] Completing Region/Field/Buffer/Package initialization:.......................................................... [ 110.411505] Initialized 17/22 Regions 0/0 Fields 35/35 Buffers 6/22 Packages (475 nodes) [ 110.419783] Initializing Device/Processor/Thermal objects by executing _INI methods:. [ 110.427557] Executed 1 _INI methods requiring 0 _STA executions (examined 57 objects) [ 110.435796] ACPI: Interpreter enabled [ 110.439463] ACPI: (supports S0 S1 S4 S5) [ 110.443474] ACPI: Using IOAPIC for interrupt routing [ 110.453066] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 110.459398] PCI: PXH quirk detected, disabling MSI for SHPC device [ 110.465647] PCI: PXH quirk detected, disabling MSI for SHPC device [ 110.472637] PCI: Transparent bridge - 0000:00:1e.0 [ 110.486226] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 14 15) *9 [ 110.493490] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15) [ 110.500550] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15) [ 110.507596] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15) [ 110.514658] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 110.522882] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled. [ 110.530906] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 110.539123] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0, disabled. [ 110.547189] Linux Plug and Play Support v0.97 (c) Adam Belay [ 110.552879] pnp: PnP ACPI init [ 110.555939] ACPI: bus type pnp registered [ 110.563344] pnp: PnP ACPI: found 13 devices [ 110.567531] ACPI: ACPI bus type pnp unregistered [ 110.572379] PCI: Using ACPI for IRQ routing [ 110.576565] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 110.600746] PCI-GART: No AMD northbridge found. [ 110.605388] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 110.610343] hpet0: 3 64-bit timers, 14318180 Hz [ 110.615945] ACPI: RTC can wake from S4 [ 110.619697] Time: tsc clocksource has been installed. [ 110.636767] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 110.644249] system 00:01: iomem range 0xfee00000-0xfee0ffff could not be reserved [ 110.651728] system 00:01: iomem range 0xfec80000-0xfec80fff has been reserved[ 110.658861] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved[ 110.666399] PCI: Bridge: 0000:03:00.0 [ 110.670067] IO window: 2000-2fff [ 110.673475] MEM window: d8200000-d82fffff [ 110.677660] PREFETCH window: d8000000-d80fffff [ 110.682278] PCI: Bridge: 0000:03:00.2 [ 110.685942] IO window: disabled. [ 110.689351] MEM window: disabled. [ 110.692999] PREFETCH window: disabled. [ 110.696925] PCI: Bridge: 0000:02:00.0 [ 110.700589] IO window: 2000-2fff [ 110.703996] MEM window: d8200000-d82fffff [ 110.708182] PREFETCH window: d8000000-d80fffff [ 110.712801] PCI: Bridge: 0000:02:02.0 [ 110.716465] IO window: 3000-3fff [ 110.719866] MEM window: d8300000-d83fffff [ 110.724052] PREFETCH window: disabled. [ 110.727977] PCI: Bridge: 0000:01:00.0 [ 110.731644] IO window: 2000-3fff [ 110.735051] MEM window: d8200000-d83fffff [ 110.739234] PREFETCH window: d8000000-d80fffff [ 110.743855] PCI: Bridge: 0000:01:00.3 [ 110.747520] IO window: disabled. [ 110.750926] MEM window: disabled. [ 110.754420] PREFETCH window: disabled. [ 110.758346] PCI: Bridge: 0000:00:02.0 [ 110.762010] IO window: 2000-3fff [ 110.765416] MEM window: d8100000-d83fffff [ 110.769603] PREFETCH window: d8000000-d80fffff [ 110.774222] PCI: Bridge: 0000:00:04.0 [ 110.777887] IO window: disabled. [ 110.781293] MEM window: disabled. [ 110.784786] PREFETCH window: disabled. [ 110.788711] PCI: Bridge: 0000:00:06.0 [ 110.792370] IO window: disabled. [ 110.795777] MEM window: disabled. [ 110.799269] PREFETCH window: disabled. [ 110.803195] PCI: Bridge: 0000:00:1c.0 [ 110.806859] IO window: disabled. [ 110.810259] MEM window: disabled. [ 110.813750] PREFETCH window: disabled. [ 110.817678] PCI: Bridge: 0000:00:1e.0 [ 110.821342] IO window: 4000-4fff [ 110.824750] MEM window: d8400000-d84fffff [ 110.828935] PREFETCH window: d0000000-d7ffffff [ 110.833564] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 110.840990] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 110.848418] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 110.855868] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 110.863296] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 110.870714] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 110.878138] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 110.885591] NET: Registered protocol family 2 [ 110.929296] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 110.939121] TCP established hash table entries: 524288 (order: 11, 12582912 bytes) [ 110.952689] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 110.959871] TCP: Hash tables configured (established 524288 bind 65536) [ 110.966482] TCP reno registered [ 110.980964] Simple Boot Flag at 0x38 set to 0x1 [ 110.986874] audit: initializing netlink socket (disabled) [ 110.992289] audit(1194955503.965:1): initialized [ 110.997730] Total HugeTLB memory allocated, 0 [ 111.002257] VFS: Disk quotas dquot_6.5.1 [ 111.006201] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 111.012799] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 111.020192] io scheduler noop registered [ 111.024117] io scheduler anticipatory registered [ 111.028734] io scheduler deadline registered [ 111.033015] io scheduler cfq registered (default) [ 111.039924] assign_interrupt_mode Found MSI capability [ 111.045197] assign_interrupt_mode Found MSI capability [ 111.050457] assign_interrupt_mode Found MSI capability [ 111.055729] assign_interrupt_mode Found MSI capability [ 111.061184] assign_interrupt_mode Found MSI capability [ 111.066469] assign_interrupt_mode Found MSI capability [ 111.080086] Non-volatile memory driver v1.2 [ 111.084272] Linux agpgart interface v0.102 [ 111.088374] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 111.096331] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 111.102445] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 111.108878] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 111.114611] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 111.120404] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 111.130223] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 111.135191] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 111.140334] mice: PS/2 mouse device common for all mice [ 111.475710] input: PC Speaker as /devices/platform/pcspkr/input/input0 [ 111.558109] cpuidle: using governor ladder [ 111.562207] cpuidle: using governor menu [ 111.566215] NET: Registered protocol family 1 [ 111.570609] registered taskstats version 1 [ 111.574830] Freeing unused kernel memory: 328k freed Moving into tmpfs... done.

...

...

openSUSE installation program v3.0.22 (c) 1996-2007 SUSE Linux Products GmbH <<< Starting udev... [ 111.901776] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 111.908090] rtc0: alarms up to one month, y3k [ 111.914551] Floppy drive(s): fd0 is 1.44M [ 111.920224] parport_pc 00:0c: reported by Plug and Play ACPI [ 111.926144] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 111.936553] FDC 0 is a post-1991 82077 ok Loading basic drivers... ok Linuxrc v3.0.22 (Kernel 2.6.24-rc2-4-default) <<<

Main Menu 1) Settings 2) System Information 3) Kernel Modules (Hardware Drivers) 4) Start Installation or System 5) Verify Installation CD-ROM/DVD 6) Eject CD 7) Exit or Reboot 8) Power off

3

Kernel Modules (Hardware Drivers) 1) Load IDE/RAID/SCSI Modules 2) Load Network Card Modules 3) Load PCMCIA Modules 4) Load WLAN Modules 5) Load USB Modules 6) Load FireWire Modules 7) Load File System Modules 8) Load Unknown Modules 9) Show Loaded Modules 10) Unload Modules 11) Add Driver Update 12) Show Driver Updates

1

Load IDE/RAID/SCSI Modules 1) pata_ali : ALi PATA 2) pata_amd : AMD PATA 3) pata_artop : ARTOP PATA 4) pata_atiixp : ATI IXP200/300/400 PATA 5) pata_cmd64x : CMD64x series PATA 6) pata_cmd640 : CMD640 PATA 7) pata_cs5520 : Cyrix CS5510/5520 PATA 8) pata_cs5530 : Cyrix/NS/AMD 5530 PATA 9) pata_cypress : CY82C693 PATA 10) pata_efar : EFAR PIIX clones PATA 11) pata_hpt366 : Highpoint HPT366/368 PATA 12) pata_hpt37x : Highpoint HPT37x/30x PATA 13) pata_hpt3x2n : Highpoint HPT3x2n/30x PATA 14) pata_hpt3x3 : Highpoint HPT343/363 PATA 15) pata_it821x : IT8211/IT8212 RAID PATA 16) pata_it8213 : IT8213 PATA 17) pata_jmicron : Jmicron PATA 18) pata_marvell : Marvell ATA in legacy mode 19) pata_mpiix : Intel MPIIX PATA 20) pata_netcell : Netcell RAID PATA 21) pata_ns87410 : Nat Semi 87410 PATA 22) pata_opti : Opti 621/621X PATA 23) pata_optidma : Opti Firestar/Firestar Plus PATA 24) pata_pdc202xx_old : Promise 2024x and 20262-20267 PATA 25) pata_radisys : Radisys R82600 PATA 26) pata_rz1000 : RZ1000 PATA 27) pata_sc1200 : NS/AMD SC1200 PATA 28) pata_serverworks : Serverworks OSB4/CSB5/CSB6 PATA 29) pata_sil680 : SI680 PATA 30) pata_sis : SiS PATA 31) pata_sl82c105 : Sl82c105 PATA 32) pata_triflex : Compaq Triflex PATA 33) pata_via : VIA PATA 34) pata_oldpiix : SCSI low-level driver for early PI 35) ata_generic : low-level driver for generic ATA 36) aec62xx : ARTOP AEC62xx IDE 37) alim15x3 : ALi 15x3 IDE 38) amd74xx : AMD PCI and nVidia nForce IDE 39) atiixp : ATI IXP IDE 40) cmd64x : CMD64x IDE 41) cy82c693 : Cypress CY82C693 IDE 42) generic : Generic PCI IDE 43) hpt34x : Highpoint 34x IDE 44) hpt366 : Highpoint HPT366 IDE 45) it821x : ITE 821x IDE 46) ns87415 : NS87415 IDE 47) pdc202xx_new : Promise PDC20268+ IDE 48) pdc202xx_old : Promise (Older Controllers) IDE 49) piix : Intel PIIX IDE 50) rz1000 : RZ1000 IDE 51) sc1200 : NS SC1200 IDE 52) serverworks : Serverworks OSB4/CSB5/CSB6 IDE 53) siimage : SiI IDE 54) sis5513 : SIS IDE 55) slc90e66 : SLC90E66 IDE 56) triflex : Compaq Triflex IDE 57) via82cxxx : VIA IDE 58) ide-generic : Generic IDE Host Driver 59) 3w-xxxx : 3ware ATA RAID 60) 3w-9xxx : 3ware 9000 Driver 61) aic7xxx : Adaptec 274x/284x/294x 62) aic79xx : Adaptec aic790x Ultra320 63) aic7xxx_old : Adaptec 274x/284x/294x (old driver 64) aic94xx : Adaptec 94xx SAS/SATA 65) atp870u : ACARD AEC-671X 66) ahci : AHCI SATA driver 67) aacraid : Adaptec RAID 68) advansys : AdvanSys 69) BusLogic : BusLogic 70) cciss : Compaq CISS Array 71) cpqarray : Compaq SMART2 RAID 72) dmx3191d : Domex DMX3191D SCSI 73) eata : EATA (E)ISA (PM2011/021/012 etc) 74) lpfc : Emulex LightPulse Fibre Channel 75) fdomain : Future Domain 16xx 76) hptiop : HighPoint RocketRAID 3xxx SATA Dri 77) ips : IBM ServeRAID 78) gdth : ICP Vortex GDTH Disk Array 79) initio : Initio INI-9X00U/UW 80) sata_inic162x : Initio 162x SATA 81) ata_piix : Intel PIIX/ICH ATA controller 82) i2o_block : Intelligent I/O Block 83) i2o_scsi : Intelligent I/O SCSI 84) imm : IOMEGA Parallel Port new driver 85) ppa : IOMEGA Parallel Port ZIP drive 86) megaraid : LSI Logic MegaRAID 87) megaraid_mbox : LSI Logic MegaRAID Mailbox 88) megaraid_sas : LSI Logic MegaRAID SAS 89) megaraid_mm : LSI Logic Management Module 90) mptscsih : Fusion MPT SCSI Host driver 91) mptfc : Fusion MPT FC Host driver 92) mptspi : Fusion MPT SPI Host driver 93) mptsas : Fusion MPT SAS Host driver 94) sata_mv : Marvell SATA Driver 95) DAC960 : Mylex DAC-960/DAC1100 96) cs5520 : Cyrix 5510/5520 IDE 97) cs5530 : Cyrix/NS 5530 IDE 98) dc395x : Tekram DC395 and DC315 series 99) sata_qstor : Pacific Digital QStor SATA 100) pdc_adma : Pacific Digital ADMA 101) sata_promise : Promise SATA TX2/TX4 Driver 102) sata_sx4 : Promise SATA SX4 Driver 103) sx8 : Promise SATA SX8 Driver 104) stex : Promise SuperTrak EX 105) sata_nv : NVIDIA nForce SATA Driver 106) qla4xxx : QLogic ISP 4XXX iSCSI 107) qla1280 : QLogic QLA1280/QLA12160 108) sata_sil : Silicon Image SATA 109) sata_sil24 : Silicon Image 3124/3132 SATA 110) sata_sis : Silicon Integratad Systems SATA 111) sym53c8xx : Symbios 53c8xx 112) tmscsim : Tekram DC390(T) (AM53C974 chip) 113) sata_uli : ULi Electronics SATA Driver 114) sata_via : VIA SATA Driver 115) sata_vsc : Vitesse VSC7174 SATA Driver 116) sata_svw : K2 SATA Driver 117) arcmsr : ARECA SATA RAID 118) iscsi_tcp : iSCSI/TCP data-path 119) libiscsi : iSCSI library functions 120) ide-scsi : SCSI emulation for IDE ATAPI 121) ide-floppy : ATAPI floppy driver 122) scsi_mod : Generic Mid-Level SCSI Driver 123) sd_mod : SCSI Disk Driver 124) sr_mod : SCSI CD-ROM driver 125) ide-cd : ATAPI CD-ROM Driver 126) ide-disk : ATA Disk Driver 127) floppy : Floppy driver

118 Trying to load module "scsi_transport_iscsi"...

During loading, you may want to watch the kernel messages on virtual console 4 (ALT-F4). Use ALT-F1 to switch back to this menu. Module "scsi_transport_iscsi" loaded successfully. Enter parameters for "libiscsi"> Trying to load module "libiscsi"... During loading, you may want to watch the kernel messages on virtual console 4 (ALT-F4). Use ALT-F1 to switch back to this menu. Module "libiscsi" loaded successfully. Enter parameters for "iscsi_tcp"> Trying to load module "iscsi_tcp"... During loading, you may want to watch the kernel messages on virtual console 4 (ALT-F4). Use ALT-F1 to switch back to this menu. Module "iscsi_tcp" loaded successfully. Kernel Modules (Hardware Drivers) 1) Load IDE/RAID/SCSI Modules 2) Load Network Card Modules 3) Load PCMCIA Modules 4) Load WLAN Modules 5) Load USB Modules 6) Load FireWire Modules 7) Load File System Modules 8) Load Unknown Modules 9) Show Loaded Modules 10) Unload Modules 11) Add Driver Update 12) Show Driver Updates

2

Load Network Card Modules 1) 3c359 : 3Com 3c359 Tokenlink Velocity XL 2) 3c59x : 3Com 3c59x/3c90x (592/595/597) 3) typhoon : 3Com 3CR990 Gigabit Ethernet 4) starfire : Adaptec Starfire 5) acenic : Alteon AceNIC/3C985/NetGear GA620 6) pcnet32 : AMD PCI PCnet32 (PCI bus NE2100) 7) amd8111e : AMD8111 based 10/100 Ethernet 8) atl1 : Attansic 1000M Ethernet 9) bnx2 : Broadcom NetXtreme II BCM5706 10) tg3 : Broadcom Tigon3 Ethernet 11) cxgb : Chelsio T1 10Gb Ethernet 12) cxgb3 : Chelsio T3 10Gb Ethernet 13) dl2k : D-Link DL2000 Gigabit Ethernet 14) de4x5 : DE425, DE434, DE435, DE450, DE500 15) tulip : DEC Tulip (DC21x4x) PCI 16) de2104x : Intel/Digital 21040/1 series PCI Ethern 17) dmfe : DM9102 PCI Fast Ethernet 18) rrunner : Essential RoadRunner HIPPI 19) hp100 : HP 10/100VG PCLAN (ISA, EISA, PCI) 20) olympic : IBM Olympic chipset PCI Token Ring 21) eepro100 : Intel EtherExpress Pro 100 22) e100 : Intel PRO/100 / EtherExpr. PRO/100 23) e1000 : Intel PRO/1000 Gigabit 24) e1000e : Intel PRO/1000 PCI-E Gigabit 25) ixgb : Intel(R) PRO/10GbE 26) abyss : Madge Smart 16/4 PCI Mk2 Token Ring 27) sky2 : Marvell Yukon 2 Gigabit Ethernet 28) myri10ge : Myricom 10G Ethernet 29) fealnx : Myson MTD-8xx PCI Ethernet 30) mcs7830 : USB MCS7830 31) ns83820 : National Semiconductor DP83820 32) natsemi : NatSemi DP8381x Ethernet 33) ne2k-pci : NE 2000 (PCI) 34) netxen_nic : NetXen Multi port (1/10) Gigabit 35) forcedeth : nForce Ethernet 36) hamachi : Packet Engines GNIC-II (Hamachi) 37) yellowfin : Packet Engines Yellowfin Gigabit 38) plip : PLIP (IP via parallel port) 39) qla3xxx : QLogic ISP3XXX 40) 8139cp : RealTek RTL8139 C+ 41) 8139too : RealTek RTL8139 42) r8169 : RealTek RTL8169 Gigabit Ethernet 43) s2io : S2IO 10GbE Server 44) sc92031 : "Silan SC92031 45) sis900 : SiS 900 PCI Fast Ethernet 46) sis190 : SiS 190 Gigabit Ethernet 47) epic100 : SMC 83c170 EPIC/100 48) cassini : Sun Cassini(+) Ethernet 49) sungem : Sun GEM 50) sunhme : Sun Happy Meal 10/100baseT 51) sundance : Sundance ST201 "Alta" Ethernet 52) skge : SysKonnect Gigabit Ethernet 53) skfp : SysKonnect FDDI (SK-55xx/SK-58xx) 54) sk98lin : SysKonnect SK-98xx Gigabit Ethernet 55) tmspci : TMS380-based PCI Token Ring 56) uli526x : ULi M5261/M5263 Fast Ethernet 57) via-velocity : Velocity Gigabit Ethernet 58) via-rhine : VIA VT86c100A Rhine-II 59) winbond-840 : Winbond W89c840 Ethernet 60) xircom_cb : Xircom Ethernet CardBus Card 61) crc-ccitt : CRC-CCITT calculations 62) mlx4_core : Mellanox ConnectX HCA low-level driver

23

Enter parameters for "e1000"> Trying to load module "e1000"... During loading, you may want to watch the kernel messages on virtual console 4 (ALT-F4). Use ALT-F1 to switch back to this menu. note that attempting to switch to ALT-F4 does not work. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.