[Bug 871689] New: No sound over HDMI
https://bugzilla.novell.com/show_bug.cgi?id=871689 https://bugzilla.novell.com/show_bug.cgi?id=871689#c0 Summary: No sound over HDMI Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Sound AssignedTo: tiwai@suse.com ReportedBy: schwab@linux-m68k.org QAContact: qa-bugs@suse.de Found By: --- Blocker: --- $ cat /proc/asound/cards 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xf7c10000 irq 45 $ lspci 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a4) 00:1f.0 ISA bridge: Intel Corporation B75 Express Chipset LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06) $ grep -ri connect . /card0/codec#0: Connection: 1 /card0/codec#0: Connection: 1 /card0/codec#0: Connection: 1 /card0/codec#0: Connection: 10 /card0/codec#0: Connection: 2 /card0/codec#0: Connection: 2 /card0/codec#0: Connection: 2 /card0/codec#0: Connection: 2 /card0/codec#0: Connection: 1 /card0/codec#0: Connection: 1 /card0/codec#0: Connection: 1 /card0/codec#0: Connection: 1 /card0/codec#0: Connection: 1 /card0/codec#0: Connection: 5 /card0/codec#0: Connection: 5 /card0/codec#0: Connection: 5 /card0/codec#0: Connection: 5 /card0/codec#0: Connection: 1 /card0/codec#0: Connection: 12 /card0/codec#0: Connection: 11 /card0/codec#0: Connection: 2 /card0/codec#3: Connection: 1 /card0/codec#3: Connection: 1 /card0/codec#3: Connection: 1 /card0/eld#3.0:connection_type HDMI $ xrandr --prop Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 32767 x 32767 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 connected primary 1280x1024+0+0 (normal left inverted right x axis y axis) 376mm x 301mm EDID: 00ffffffffffff001e6d714a0b920100 070e0103ee261e78ea0a50a5584a9a26 215054a56a80314f454f614f81800101 010101010101302a009851002a403070 1300782d1100001e000000fd00384b1e 470b000a202020202020000000fc004c 3139313042200a2020202020000000fc 000a2020202020202020202020200060 Broadcast RGB: Automatic supported: Automatic, Full, Limited 16:235 audio: auto supported: force-dvi, off, auto, on 1280x1024 60.0*+ 1152x864 75.0 1024x768 75.1 75.0 60.0 832x624 74.6 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Automatic supported: Automatic, Full, Limited 16:235 audio: auto supported: force-dvi, off, auto, on HDMI2 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 640mm x 360mm EDID: 00ffffffffffff00412f000001010101 00130103804024780af9aba2554a9a25 0f474a21080081800101010101010101 010101010101023a801871382d40582c 450080682100001e1b2150a051001e30 48883500806821000018000000fc0056 53582d3531390a2020202020000000fd 00384c1e5311000a202020202020018d 02033c714d9f10202114051304110215 06012c0f7f07177fff3f7fff497fff83 0f000078030c002100b82d20c80e0141 00fc20306070281038106810023a80d0 72382d40102c458080682100001e011d 803e73382d407e2c458080682100001e 011d80d0721c1620102c258080682100 009e000000000000000000000000005e Broadcast RGB: Automatic supported: Automatic, Full, Limited 16:235 audio: auto supported: force-dvi, off, auto, on 1920x1080 60.0 + 50.0 59.9 25.0 24.0 24.0 1920x1080i 60.1 50.0 60.0 1280x1024 60.0* 1360x768 59.8 1280x720 60.0 50.0 59.9 1440x576i 50.1 1024x768 60.0 1440x480i 60.1 60.1 800x600 60.3 720x576 50.0 720x480 60.0 59.9 640x480 60.0 59.9 DP2 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Automatic supported: Automatic, Full, Limited 16:235 audio: auto supported: force-dvi, off, auto, on VIRTUAL1 disconnected (normal left inverted right x axis y axis) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=871689 https://bugzilla.novell.com/show_bug.cgi?id=871689#c1 Takashi Iwai <tiwai@suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO InfoProvider| |schwab@linux-m68k.org --- Comment #1 from Takashi Iwai <tiwai@suse.com> 2014-04-03 06:27:10 UTC --- Could you give alsa-info.sh output while plugging and playing to HDMI? Run the script with --no-upload option, and attach to Bugzilla. Also, give the contents of /proc/asound/card*/eld#* files. You seem to have two HDMIs connected, but only the first one is detected, judging from the grep output above. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=871689 https://bugzilla.novell.com/show_bug.cgi?id=871689#c2 --- Comment #2 from Andreas Schwab <schwab@suse.com> 2014-04-03 09:09:39 CEST --- HDMI1 is only available as DVI/VGA. All other outputs have no connector. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=871689 https://bugzilla.novell.com/show_bug.cgi?id=871689#c3 --- Comment #3 from Andreas Schwab <schwab@suse.com> 2014-04-03 09:44:04 CEST --- Or rather VGA1 is probably connected to the VGA connector, but I haven't used that yet. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=871689 https://bugzilla.novell.com/show_bug.cgi?id=871689#c4 Andreas Schwab <schwab@linux-m68k.org> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW InfoProvider|schwab@linux-m68k.org | --- Comment #4 from Andreas Schwab <schwab@linux-m68k.org> 2014-04-03 18:29:41 CEST --- Created an attachment (id=584939) --> (http://bugzilla.novell.com/attachment.cgi?id=584939) ALSA info $ cat eld#3.0 monitor_present 1 eld_valid 1 monitor_name VSX-519 connection_type HDMI eld_version [0x2] CEA-861D or below edid_version [0x3] CEA-861-B, C or D manufacture_id 0x2f41 product_id 0x0 port_id 0x0 support_hdcp 0 support_ai 1 audio_sync_delay 0 speakers [0xf] FL/FR LFE FC RL/RR sad_count 4 sad0_coding_type [0x1] LPCM sad0_channels 8 sad0_rates [0x1ee0] 32000 44100 48000 88200 96000 176400 192000 sad0_bits [0xe0000] 16 20 24 sad1_coding_type [0x2] AC-3 sad1_channels 8 sad1_rates [0x1ee0] 32000 44100 48000 88200 96000 176400 192000 sad1_max_bitrate 2040000 sad2_coding_type [0x7] DTS sad2_channels 8 sad2_rates [0x1ee0] 32000 44100 48000 88200 96000 176400 192000 sad2_max_bitrate 2040000 sad3_coding_type [0x9] DSD (One Bit Audio) sad3_channels 2 sad3_rates [0x1ee0] 32000 44100 48000 88200 96000 176400 192000 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=871689 https://bugzilla.novell.com/show_bug.cgi?id=871689#c5 Takashi Iwai <tiwai@suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO InfoProvider| |schwab@linux-m68k.org --- Comment #5 from Takashi Iwai <tiwai@suse.com> 2014-04-03 16:35:13 UTC --- OK, then on this machine, BIOS already hides two non-HDMI ports, thus the first and the third ports are ignored but only the second HDMI port is handled in the sound driver side. As eld proc file has a certain content, at this moment, the HDMI device was properly detected and the sound driver should have set up the pin and the converter widgets properly. What happens if you play directly like below? % aplay -Dhdmi:0 -vv something.wav -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=871689 https://bugzilla.novell.com/show_bug.cgi?id=871689#c6 Andreas Schwab <schwab@linux-m68k.org> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW InfoProvider|schwab@linux-m68k.org | --- Comment #6 from Andreas Schwab <schwab@linux-m68k.org> 2014-04-03 19:01:20 CEST --- Doesn't work either. Playing WAVE '/usr/share/sounds/alsa/test.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo Hooks PCM Its setup is: stream : PLAYBACK access : RW_INTERLEAVED format : S16_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 16 buffer_size : 22052 period_size : 5513 period_time : 125011 tstamp_mode : NONE period_step : 1 avail_min : 5513 period_event : 0 start_threshold : 22052 stop_threshold : 22052 silence_threshold: 0 silence_size : 0 boundary : 6207086186423386112 Slave: Hardware PCM card 0 'HDA Intel PCH' device 3 subdevice 0 Its setup is: stream : PLAYBACK access : RW_INTERLEAVED format : S16_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 16 buffer_size : 22052 period_size : 5513 period_time : 125011 tstamp_mode : NONE period_step : 1 avail_min : 5513 period_event : 0 start_threshold : 22052 stop_threshold : 22052 silence_threshold: 0 silence_size : 0 boundary : 6207086186423386112 appl_ptr : 0 hw_ptr : 0 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=871689 https://bugzilla.novell.com/show_bug.cgi?id=871689#c7 Takashi Iwai <tiwai@suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO InfoProvider| |schwab@linux-m68k.org --- Comment #7 from Takashi Iwai <tiwai@suse.com> 2014-04-04 07:14:43 UTC --- Please take alsa-info.sh snapshot while you're playing over hdmi:0 device. It's for checking the state of the digital converter widget (NID 0x03 or the PantherPoint codec). Meanwhile, we need to double-check whether the detected HDMI port really corresponds to the expected one. Disconnect the HDMI cable and check eld# proc file again. Is the state changed? Of course, another worth thing to test would be upgrading to the latest kernel, 3.14.0. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=871689 https://bugzilla.novell.com/show_bug.cgi?id=871689#c8 Andreas Schwab <schwab@linux-m68k.org> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW InfoProvider|schwab@linux-m68k.org | --- Comment #8 from Andreas Schwab <schwab@linux-m68k.org> 2014-04-04 09:25:31 CEST --- Created an attachment (id=585048) --> (http://bugzilla.novell.com/attachment.cgi?id=585048) ALSA info w/ -Dhdmi:0 $ cat eld#3.0 (while unplugged) monitor_present 0 eld_valid 0 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=871689 https://bugzilla.novell.com/show_bug.cgi?id=871689#c9 --- Comment #9 from Andreas Schwab <schwab@linux-m68k.org> 2014-04-04 09:32:55 CEST --- Sound works when the tv set is switched off, but stopps as soon as it is switched on. But I always have to run xrandr manually whenever the state of HDMI changes in order to re-establish the connection to the receiver. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=871689 https://bugzilla.novell.com/show_bug.cgi?id=871689#c10 Takashi Iwai <tiwai@suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO InfoProvider| |schwab@linux-m68k.org --- Comment #10 from Takashi Iwai <tiwai@suse.com> 2014-04-04 07:38:51 UTC --- OK, then from the sound device POV, everything is set up properly. As was afraid, it's likely an issue of the video driver side. Better to report on either fdo bugzilla or bko bugzilla. Still testing a newer kernel would be requested for the upstream report, though. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
participants (1)
-
bugzilla_noreply＠novell.com