[Bug 341942] New: kernell oops protection fault
https://bugzilla.novell.com/show_bug.cgi?id=341942#c1 Summary: kernell oops protection fault Product: openSUSE 10.3 Version: Final Platform: x86-64 OS/Version: openSUSE 10.3 Status: NEW Severity: Major Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers@forge.provo.novell.com ReportedBy: harterc1@comcast.net QAContact: qa@suse.de Found By: Customer general protection fault: 0000 [1] SMP last sysfs file: /devices/pci0000:00/0000:00:0a.0/irq CPU 0 Modules linked in: nls_utf8 ip6t_LOG nf_conntrack_ipv6 ipt_LOG xt_limit xt_pkttype af_packet snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device ip6t_REJECT xt_tcpudp ipt_REJECT xt_state iptable_mangle iptable_nat nf_nat iptable_filter ip6table_mangle nf_conntrack_ipv4 cpufreq_conservative cpufreq_userspace nf_conntrack cpufreq_powersave nfnetlink ip_tables powernow_k8 ip6table_filter ip6_tables x_tables ipv6 apparmor fuse dm_crypt loop dm_mod snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_timer snd ohci1394 soundcore ieee1394 snd_page_alloc forcedeth ide_cd rtc_cmos k8temp rtc_core hwmon button floppy cdrom i2c_nforce2 rtc_lib ide_disk i2c_core sg ehci_hcd ohci_hcd usbcore sd_mod amd74xx edd ext3 mbcache jbd fan sata_nv libata scsi_mod generic ide_core thermal processor Pid: 15360, comm: X Tainted: G N 2.6.22.5-31-default #1 RIP: 0010:[<ffffffff80284623>] [<ffffffff80284623>] kfree+0x73/0x192 RSP: 0018:ffff810042cb7bb8 EFLAGS: 00010082 RAX: 0000000000000000 RBX: ffff810025c17cc0 RCX: 000000000000003f RDX: ffff81007f621f28 RSI: 0000000000000296 RDI: ffff810057fb3000 RBP: ffff810025c17cc0 R08: 0000000000000001 R09: ffff810001014bc0 R10: ffff810025c17cc0 R11: ffff810001181740 R12: ff00810037b28a40 R13: ffff810057fb3000 R14: 0000000000000286 R15: ffff810042cb7d28 FS: 00002aca63596290(0000) GS:ffffffff804ff000(0000) knlGS:00000000b74e0b10 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000008479000 CR3: 00000000458fc000 CR4: 00000000000006e0 Process X (pid: 15360, threadinfo ffff810042cb6000, task ffff81007d2b0100) Stack: 0000000000000296 ffffffff803f5a63 ffff810025c17cc0 ffff810025c17cc0 ffff810037278f00 0000000000000001 ffff810042cb7d60 ffffffff803965c0 0000000000000804 ffffffff803f47b3 ffff810000000000 ffff810042cb7c78 Call Trace: [<ffffffff803f5a63>] unix_write_space+0x45/0x70 [<ffffffff803965c0>] kfree_skbmem+0x9/0x75 [<ffffffff803f47b3>] unix_stream_recvmsg+0x41c/0x57f [<ffffffff8022b037>] default_wake_function+0x0/0xe [<ffffffff8022b037>] default_wake_function+0x0/0xe [<ffffffff803906d6>] sock_aio_read+0x10a/0x119 [<ffffffff8022b037>] default_wake_function+0x0/0xe [<ffffffff80288c21>] do_sync_read+0xd1/0x118 [<ffffffff8024334b>] autoremove_wake_function+0x0/0x2e [<ffffffff80209ad7>] sys_rt_sigreturn+0x331/0x36a [<ffffffff80289450>] vfs_read+0xde/0x153 [<ffffffff802897d1>] sys_read+0x45/0x6e [<ffffffff80209c2e>] system_call+0x7e/0x83 Code: 49 8b 1c c4 4c 89 6c 24 08 e8 03 b4 f9 ff 48 89 c7 48 c1 ef RIP [<ffffffff80284623>] kfree+0x73/0x192 RSP <ffff810042cb7bb8> SFW2-OUT-ERROR IN= OUT=eth0 SRC=76.22.192.144 DST=209.73.188.76 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=35053 DF PROTO=TCP SPT=27692 DPT=80 WINDOW=62780 RES=0x00 ACK FIN URGP=0 It was processing ip packets after it crashed/locked up. I rebooted and it crashed again later. general protection fault: 0000 [1] SMP last sysfs file: /devices/pci0000:00/0000:00:0a.0/irq CPU 1 Modules linked in: ip6t_LOG nf_conntrack_ipv6 ipt_LOG xt_limit xt_pkttype af_packet snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device ip6t_REJECT xt_tcpudp ipt_REJECT xt_state iptable_mangle iptable_nat nf_nat iptable_filter ip6table_mangle nf_conntrack_ipv4 nf_conntrack nfnetlink ip_tables ip6table_filter ip6_tables x_tables ipv6 cpufreq_conservative cpufreq_userspace cpufreq_powersave powernow_k8 apparmor fuse dm_crypt loop dm_mod snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_timer snd rtc_cmos ide_cd soundcore ohci1394 rtc_core cdrom snd_page_alloc forcedeth ieee1394 rtc_lib i2c_nforce2 ide_disk button floppy i2c_core k8temp sg hwmon ohci_hcd ehci_hcd usbcore sd_mod amd74xx edd ext3 mbcache jbd fan sata_nv libata scsi_mod generic ide_core thermal processor Pid: 6032, comm: X Tainted: G N 2.6.22.5-31-default #1 RIP: 0010:[<ffffffff80284623>] [<ffffffff80284623>] kfree+0x73/0x192 RSP: 0018:ffff810074a1fbb8 EFLAGS: 00010082 RAX: 0000000000000001 RBX: ffff8100656762c0 RCX: 000000000000003f RDX: ffff81007fe42ea8 RSI: 0000000000000296 RDI: ffff81007d243200 RBP: ffff8100656762c0 R08: 0000000000000001 R09: ffff810001021bc0 R10: ffff8100656762c0 R11: ffffffff804ff000 R12: ffff000037b2c9c0 R13: ffff81007d243200 R14: 0000000000000286 R15: ffff810074a1fd28 FS: 00002aef3167e290(0000) GS:ffff810001181740(0000) knlGS:00000000b5b11b90 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00002b6212732000 CR3: 0000000073b67000 CR4: 00000000000006e0 Process X (pid: 6032, threadinfo ffff810074a1e000, task ffff81007de010c0) Stack: 0000000000000296 ffffffff803f5a63 ffff8100656762c0 ffff8100656762c0 ffff810058d6f180 0000000000000001 ffff810074a1fd60 ffffffff803965c0 0000000000000010 ffffffff803f47b3 ffff810000000000 ffff810074a1fc78 Call Trace: [<ffffffff803f5a63>] unix_write_space+0x45/0x70 [<ffffffff803965c0>] kfree_skbmem+0x9/0x75 [<ffffffff803f47b3>] unix_stream_recvmsg+0x41c/0x57f [<ffffffff8022b037>] default_wake_function+0x0/0xe [<ffffffff8022b037>] default_wake_function+0x0/0xe [<ffffffff803906d6>] sock_aio_read+0x10a/0x119 [<ffffffff8022b037>] default_wake_function+0x0/0xe [<ffffffff80288c21>] do_sync_read+0xd1/0x118 [<ffffffff8024334b>] autoremove_wake_function+0x0/0x2e [<ffffffff80289450>] vfs_read+0xde/0x153 [<ffffffff802897d1>] sys_read+0x45/0x6e [<ffffffff80209c2e>] system_call+0x7e/0x83 Code: 49 8b 1c c4 4c 89 6c 24 08 e8 03 b4 f9 ff 48 89 c7 48 c1 ef RIP [<ffffffff80284623>] kfree+0x73/0x192 RSP <ffff810074a1fbb8> SFW2-OUT-ERROR IN= OUT=eth0 SRC=76.22.192.144 DST=192.153.166.96 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=14218 DF PROTO=TCP SPT=25665 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A014DD4600B4082A3) SFW2-OUT-ERROR IN= OUT=eth0 SRC=76.22.192.144 DST=209.73.188.76 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=22050 DF PROTO=TCP SPT=21459 DPT=80 WINDOW=40880 RES=0x00 ACK FIN URGP=0 6~^[[6~#βώ!3ËÒÊ3þ¸Ђџ)î÷Aï÷5ö¥Èdoing fast boot Boot logging started on /dev/ttyS0(/dev/console) at Wed Nov 14 03:40:51 2007 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=341942#c1 --- Comment #1 from Donald Harter <harterc1@comcast.net> 2007-11-15 07:26:49 MST --- Created an attachment (id=183516) --> (https://bugzilla.novell.com/attachment.cgi?id=183516) hwinfo output this is a listing of my hardware. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=341942#c2 --- Comment #2 from Donald Harter <harterc1@comcast.net> 2007-11-15 07:29:45 MST --- Created an attachment (id=183517) --> (https://bugzilla.novell.com/attachment.cgi?id=183517) system map kernel system map -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=341942#c3 --- Comment #3 from Donald Harter <harterc1@comcast.net> 2007-11-15 08:05:20 MST --- Created an attachment (id=183528) --> (https://bugzilla.novell.com/attachment.cgi?id=183528) ksymoops output ksymoops output file -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=341942#c4 Jeff Mahoney <jeffm@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |jeffm@novell.com Status|NEW |NEEDINFO Info Provider| |harterc1@comcast.net --- Comment #4 from Jeff Mahoney <jeffm@novell.com> 2007-11-30 11:43:26 MST --- Is this still reproducible with the latest kernel update? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=341942#c5 --- Comment #5 from Donald Harter <harterc1@comcast.net> 2007-11-30 12:26:23 MST --- Which kernel version do you mean? I don't see any updates for suse 10.3. I have not tried it with the latest untainted kernel if that is what you mean only linux-2.6.23.1. That version also "crashes". Do you want me to try 2.6.23.9? If I had the proper patches and they would succeed, I could try it as a tainted kernel if you wish. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=341942#c6 --- Comment #6 from Jeff Mahoney <jeffm@novell.com> 2007-11-30 12:36:07 MST --- I mean version 2.6.22.12-0-default, which is the latest update. Your report is with 2.6.22.5-31-default. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=341942#c7 --- Comment #7 from Donald Harter <harterc1@comcast.net> 2007-11-30 12:39:43 MST --- OK. Yes That is on my system. Maybe later today i will reboot and see if i can get it to crash. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=341942#c8 --- Comment #8 from Donald Harter <harterc1@comcast.net> 2007-11-30 22:43:16 MST --- kernel BUG at mm/slab.c:3786! invalid opcode: 0000 [1] SMP last sysfs file: /devices/pci0000:00/0000:00:0a.0/irq CPU 1 Modules linked in: usb_storage ip6t_LOG nf_conntrack_ipv6 ipt_LOG xt_limit xt_pkttype snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device af_packet ip6t_REJECT xt_tcpudp ipt_REJECT xt_state iptable_mangle iptable_nat nf_nat iptable_filter ip6table_mangle nf_conntrack_ipv4 nf_conntrack nfnetlink ip_tables ip6table_filter ip6_tables x_tables ipv6 cpufreq_conservative cpufreq_userspace cpufreq_powersave powernow_k8 apparmor fuse dm_crypt loop dm_mod snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_timer snd ide_cd soundcore cdrom ohci1394 forcedeth snd_page_alloc button ieee1394 i2c_nforce2 ide_disk sg rtc_cmos k8temp hwmon i2c_core rtc_core floppy rtc_lib ehci_hcd ohci_hcd usbcore sd_mod amd74xx edd ext3 mbcache jbd fan sata_nv libata scsi_mod generic ide_core thermal processor Pid: 4243, comm: X Tainted: G N 2.6.22.12-0.1-default #1 RIP: 0010:[<ffffffff802850b9>] [<ffffffff802850b9>] kmem_cache_free+0x61/0x193 RSP: 0018:ffff810074a6fd18 EFLAGS: 00010087 RAX: 0000000000000080 RBX: ffff8100525b3450 RCX: 000000000000003f RDX: ffff81007f4e6f28 RSI: ffff8100525b3450 RDI: 00000000000525b3 RBP: ffff810074a6fe78 R08: ffff810074a6fd60 R09: 0000000000000286 R10: ffff810074b60180 R11: 0000000000003246 R12: ffff81000115e500 R13: ffff8100525b3450 R14: 000000000000000d R15: 0000000000000000 FS: 00002add9a775290(0000) GS:ffff810001171940(0000) knlGS:00000000b5b0db90 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00002b6e8e3cf000 CR3: 0000000074a63000 CR4: 00000000000006e0 Process X (pid: 4243, threadinfo ffff810074a6e000, task ffff8100766b7100) Stack: 0000000000000082 0000000000000082 ffff8100525b3450 ffff810074a6fe78 ffff81007cc88ea8 000000000000000e 000000000000000d ffffffff8023b5ba ffff810074a6fd60 ffff8100766b76a8 ffff810074a6ff58 ffff8100766b7100 Call Trace: [<ffffffff8023b5ba>] __dequeue_signal+0xff/0x15a [<ffffffff8023ca60>] dequeue_signal+0x49/0x142 [<ffffffff8023d17c>] get_signal_to_deliver+0x107/0x3fd [<ffffffff8020911f>] do_notify_resume+0x9c/0x70f [<ffffffff80229aa7>] task_rq_lock+0x3d/0x73 [<ffffffff80209cb7>] sysret_signal+0x1c/0x27 [<ffffffff80209f47>] ptregscall_common+0x67/0xb0 Code: 0f 0b eb fe 9c 41 5e fa 65 8b 04 25 24 00 00 00 4c 89 ef 48 RIP [<ffffffff802850b9>] kmem_cache_free+0x61/0x193 RSP <ffff810074a6fd18> SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:50:8d:db:39:3d:00:00:00:00:00:02:08:00 SRC=126.51.51.78 DST=76.22.192.144 LEN=388 TOS=0x00 PREC=0x20 TTL=46 ID=52158 PROTO=UDP SPT=30861 DPT=1026 LEN=368 ata1: EH in ADMA mode, notifier 0x1F notifier_error 0x0 gen_ctl 0x1581000 status 0x1540 next cpb count 0x0 next cpb idx 0x0 ata1: CPB 0: ctl_flags 0x1f, resp_flags 0x1 ata1: CPB 1: ctl_flags 0x1f, resp_flags 0x1 ata1: CPB 2: ctl_flags 0x1f, resp_flags 0x1 ata1: CPB 3: ctl_flags 0x1f, resp_flags 0x1 ata1: CPB 4: ctl_flags 0x1f, resp_flags 0x1 ata1.00: exception Emask 0x0 SAct 0x1f SErr 0x0 action 0x2 frozen ata1.00: cmd 61/08:00:77:f6:ab/00:00:04:00:00/40 tag 0 cdb 0x0 data 4096 out res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: cmd 61/08:08:cf:0a:95/00:00:08:00:00/40 tag 1 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: cmd 61/10:10:47:0b:95/00:00:08:00:00/40 tag 2 cdb 0x0 data 8192 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: cmd 61/08:18:5f:00:d0/00:00:02:00:00/40 tag 3 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: cmd 61/08:20:77:02:d0/00:00:02:00:00/40 tag 4 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1: soft resetting link ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ide-cd: cmd 0x3 timed out hdc: lost interrupt hdc: request sense failure: status=0x51 { DriveReady SeekComplete Error } hdc: request sense failure: error=0x40 { LastFailedSense=0x04 } SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:50:8d:db:39:3d:00:00:00:00:00:02:08:00 SRC=64.152.208.66 DST=76.22.192.144 LEN=40 TOS=0x00 PREC=0x20 TTL=235 ID=29073 PROTO=TCP SPT=80 DPT=27855 WINDOW=9300 RES=0x00 RST URGP=0 ata1.00: qc timeout (cmd 0x27) ata1.00: failed to read native max address (err_mask=0x4) ata1.00: revalidation failed (errno=-5) ata1: failed to recover some devices, retrying in 5 secs ata1: hard resetting link ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: qc timeout (cmd 0x27) ata1.00: failed to read native max address (err_mask=0x4) ata1.00: revalidation failed (errno=-5) ata1: limiting SATA link speed to 1.5 Gbps ata1.00: limiting speed to UDMA/133:PIO3 ata1: failed to recover some devices, retrying in 5 secs ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) hdd: lost interrupt SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:50:8d:db:39:3d:00:00:00:00:00:02:08:00 SRC=221.8.118.122 DST=76.22.192.144 LEN=917 TOS=0x00 PREC=0x20 TTL=38 ID=0 DF PROTO=UDP SPT=44490 DPT=1026 LEN=897 ata1.00: qc timeout (cmd 0x27) ata1.00: failed to read native max address (err_mask=0x4) ata1.00: revalidation failed (errno=-5) ata1.00: disabled ata1: EH pending after completion, repeating EH (cnt=4) ata1: soft resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1: EH complete sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK end_request: I/O error, dev sda, sector 47186551 Buffer I/O error on device sda1, logical block 5898311 lost page write due to I/O error on sda1 sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK end_request: I/O error, dev sda, sector 47186015 Buffer I/O error on device sda1, logical block 5898244 lost page write due to I/O error on sda1 sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK end_request: I/O error, dev sda, sector 143985479 Buffer I/O error on device sda1, logical block 17998177 lost page write due to I/O error on sda1 Buffer I/O error on device sda1, logical block 17998178 lost page write due to I/O error on sda1 sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK end_request: I/O error, dev sda, sector 143985359 Buffer I/O error on device sda1, logical block 17998162 lost page write due to I/O error on sda1 sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK end_request: I/O error, dev sda, sector 78378615 Buffer I/O error on device sda1, logical block 9797319 lost page write due to I/O error on sda1 sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK end_request: I/O error, dev sda, sector 46958511 Buffer I/O error on device sda1, logical block 5869806 lost page write due to I/O error on sda1 sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK end_request: I/O error, dev sda, sector 78378615 Buffer I/O error on device sda1, logical block 9797319 lost page write due to I/O error on sda1 sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK end_request: I/O error, dev sda, sector 143985359 Buffer I/O error on device sda1, logical block 17998162 lost page write due to I/O error on sda1 sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=341942#c9 --- Comment #9 from Donald Harter <harterc1@comcast.net> 2007-11-30 22:45:28 MST --- Created an attachment (id=185519) --> (https://bugzilla.novell.com/attachment.cgi?id=185519) System Map -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=341942 Greg Kroah-Hartman <gregkh@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|kernel-maintainers@forge.provo.novell.com |kkeil@novell.com Status|NEEDINFO |NEW Info Provider|harterc1@comcast.net | -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=341942 User kkeil@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=341942#c10 Karsten Keil <kkeil@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |harterc1@comcast.net --- Comment #10 from Karsten Keil <kkeil@novell.com> 2008-05-07 10:34:23 MST --- Is this still an issue or did a later update fixed this ? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=341942 User harterc1@comcast.net added comment https://bugzilla.novell.com/show_bug.cgi?id=341942#c11 --- Comment #11 from Donald Harter <harterc1@comcast.net> 2008-05-07 16:33:46 MST --- I am using 2.6.25-default #1 SMP now. I haven't noticed any excessive crashing lately. I think there is less crashing with this version, but I have submitted a bug report on this latest version. I suspect a bad motherboard design and I am not using pata_amd. If the cause is not obvious then we can close this bug. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=341942 User kkeil@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=341942#c12 Karsten Keil <kkeil@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |RESOLVED Info Provider|harterc1@comcast.net | Resolution| |WORKSFORME --- Comment #12 from Karsten Keil <kkeil@novell.com> 2008-08-07 04:13:45 MDT --- Thanks, close due to the last comment. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
participants (1)
-
bugzilla_noreply＠novell.com