[Bug 259721] New: SuSE 10.2 freezes unless NOAPIC added as kernel option at bootup
https://bugzilla.novell.com/show_bug.cgi?id=259721
Summary: SuSE 10.2 freezes unless NOAPIC added as kernel option
at bootup
Product: openSUSE 10.2
Version: Final
Platform: x86
OS/Version: SuSE Other
Status: NEW
Severity: Major
Priority: P5 - None
Component: Usability
AssignedTo: bnc-team-screening@forge.provo.novell.com
ReportedBy: heseltine@attglobal.net
QAContact: siegfried.olschner@novell.com
Machine: IBM Thinkcentre model S50 8086-36U. Intel Pentium 4 3.2GHz (1MB),
800MHz FSB, 1GB ram, 160GB 7200RPM IDE HDD, PCI Ultra Small Form Factor (1x2),
Intel Extreme Graphics 2, 24x CD-ROM, Intel Gigabit Ethernet.
Connected to Starview KVM switch model SV231USB.
USB keyboard;
USB mouse
ps/2 backup mouse
Running SuSE Linux v. 10.2. Clean install with update. Default settings apart
from software - KDE desktop added.
NEC Multisync E750 running at 1600 x 1024 full colour, 70 hz.
PROBLEM: System freezes during inactivity (overnight) after monitor, USB
mouse, and USB keyboard are disconnected via KVM switch.
SOLUTION: Adding "noapic" to kernel option line at boot selector start up
window seems to correct the fault. No further freezes are seen to occur up to a
week later.
REMARKS: System installs without incident. Programmes work. However, when
switched out to 2nd system using KVM switch for a period of time (overnight),
and then switched back in the morning, the USB keyboard and USB mouse are not
activated. However, system awakes on use of backup ps/2 mouse. The system then
freezes at next command (say hovering over clock, or clicking on 'start
button'). The ps/2 mouse cursor continues to work. When the K Menu button is
initially clicked there is a response but the system then hangs, leaving the
menu open. A subsequent click on a sub menu does not respond or may respond
after a very long time. However, no subsequent clicks work. For example,
clicking initially on the 'start' button brings up its menu but then clicking
on shutdown causes no response. Hard boot then required. Interestingly, moving
the pointer to the frozen but open K menu changes the pointer to the rotating
clock type. Its rotating hand does not advance. However clicking the ps/2 mouse
quickly a number of times sometimes advances the hand on the waiting cursor
clock.
I have not been successful at creating this freezing problem logging into
console mode. However, I have not tried logging into console mode long enough
to determine if the same problem arises. If I can recreate the problem in
console mode, I will add a further note.
I could not attach the var/log/messages file or the boot.msg file as they were
too long.
Thank you for reading this report.
Mark Heseltine
========= START TEXT FROM VAR LOG MESSAGES ============
Mar 30 19:34:08 linux syslog-ng[3105]: syslog-ng version 1.6.11 starting
Mar 30 19:34:11 linux modprobe: FATAL: Error inserting asus_acpi
(/lib/modules/2.6.18.2-34-default/kernel/drivers/acpi/asus_acpi.ko): No such
device
Mar 30 19:34:11 linux modprobe: FATAL: Error inserting ibm_acpi
(/lib/modules/2.6.18.2-34-default/kernel/drivers/acpi/ibm_acpi.ko): No such
device
Mar 30 19:34:11 linux modprobe: FATAL: Error inserting toshiba_acpi
(/lib/modules/2.6.18.2-34-default/kernel/drivers/acpi/toshiba_acpi.ko): No such
device
Mar 30 19:34:12 linux rchal: CPU frequency scaling is not supported by your
processor.
Mar 30 19:34:12 linux rchal: boot with 'CPUFREQ=no' in to avoid this warning.
Mar 30 19:34:12 linux rchal: Cannot load cpufreq governors - No cpufreq driver
available
Mar 30 19:34:13 linux kernel: klogd 1.4.1, log source = /proc/kmsg started.
Mar 30 19:34:13 linux kernel: bootsplash: status on console 0 changed to on
Mar 30 19:34:13 linux kernel: ACPI: Power Button (FF) [PWRF]
Mar 30 19:34:13 linux kernel: ACPI: Power Button (CM) [PWRB]
Mar 30 19:34:13 linux syslog-ng[3105]: Changing permissions on special file
/dev/xconsole
Mar 30 19:34:13 linux syslog-ng[3105]: Changing permissions on special file
/dev/tty10
Mar 30 19:34:13 linux kernel: ibm_acpi: ec object not found
Mar 30 19:34:13 linux kernel: powernow: This module only works with AMD K7 CPUs
Mar 30 19:34:14 linux kernel: NET: Registered protocol family 10
Mar 30 19:34:14 linux kernel: lo: Disabled Privacy Extensions
Mar 30 19:34:14 linux kernel: IPv6 over IPv4 tunneling driver
Mar 30 19:34:15 linux ifup: Service network not started and mode 'auto' ->
skipping
Mar 30 19:34:19 linux kernel: SCSI subsystem initialized
Mar 30 19:34:19 linux kernel: st: Version 20050830, fixed bufsize 32768, s/g
segs 256
Mar 31 02:34:21 linux kernel: e1000: eth0: e1000_watchdog: NIC Link is Up 100
Mbps Full Duplex
Mar 30 19:34:21 linux syslog-ng[3105]: STATS: dropped 0
Mar 31 02:34:32 linux kernel: eth0: no IPv6 routers present
Mar 30 19:34:51 linux zmd: NetworkManagerModule (WARN): Failed to connect to
NetworkManager
Mar 30 19:35:01 linux zmd: Daemon (WARN): Not starting remote web server
Mar 30 19:35:21 linux zmd: ShutdownManager (WARN): Preparing to shut down...
Mar 30 19:35:21 linux zmd: ShutdownManager (WARN): Shutting down daemon...
Mar 30 19:36:30 linux su: (to root) root on none
Mar 30 19:36:32 linux sux: (to root) root on none
Mar 31 02:36:34 linux kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Mar 31 02:36:34 linux kernel: NET: Registered protocol family 17
Mar 31 02:37:21 linux kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Mar 30 19:37:21 linux SuSEfirewall2: Warning: ip6tables does not support state
matching. Extended IPv6 support disabled.
Mar 30 19:37:21 linux SuSEfirewall2: Setting up rules from
/etc/sysconfig/SuSEfirewall2 ...
Mar 30 19:37:21 linux SuSEfirewall2: Warning: no interface active
Mar 31 02:37:21 linux kernel: Netfilter messages via NETLINK v0.30.
Mar 31 02:37:22 linux kernel: ip_conntrack version 2.4 (7931 buckets, 63448
max) - 228 bytes per conntrack
Mar 30 19:37:22 linux SuSEfirewall2: batch committing...
Mar 30 19:37:22 linux SuSEfirewall2: Firewall rules successfully set
........ cut ............
Mar 30 22:23:59 SuSE10-2 ifup-dhcp: .
Mar 30 22:23:59 SuSE10-2 kernel: klogd 1.4.1, log source = /proc/kmsg started.
Mar 30 22:23:59 SuSE10-2 kernel: NET: Registered protocol family 10
Mar 30 22:23:59 SuSE10-2 kernel: lo: Disabled Privacy Extensions
Mar 30 22:23:59 SuSE10-2 kernel: IPv6 over IPv4 tunneling driver
Mar 30 22:23:59 SuSE10-2 syslog-ng[2547]: Changing permissions on special file
/dev/xconsole
Mar 30 22:23:59 SuSE10-2 syslog-ng[2547]: Changing permissions on special file
/dev/tty10
Mar 30 22:23:59 SuSE10-2 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Mar 30 22:23:59 SuSE10-2 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Mar 30 22:23:59 SuSE10-2 kernel: Netfilter messages via NETLINK v0.30.
Mar 30 22:23:59 SuSE10-2 kernel: ip_conntrack version 2.4 (7931 buckets, 63448
max) - 228 bytes per conntrack
Mar 30 22:23:59 SuSE10-2 kernel: ACPI: Power Button (FF) [PWRF]
Mar 30 22:23:59 SuSE10-2 kernel: ACPI: Power Button (CM) [PWRB]
Mar 30 22:23:59 SuSE10-2 kernel: powernow: This module only works with AMD K7
CPUs
Mar 30 22:23:59 SuSE10-2 kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Mar 30 22:23:59 SuSE10-2 kernel: e1000: eth0: e1000_watchdog: NIC Link is Up
100 Mbps Full Duplex
Mar 30 22:23:59 SuSE10-2 kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes
ready
Mar 30 22:23:59 SuSE10-2 kernel: NET: Registered protocol family 17
Mar 30 22:23:59 SuSE10-2 ifup: eth0 device: Intel Corporation 82541EI
Gigabit Ethernet Controller
Mar 30 22:23:59 SuSE10-2 ifup: eth0 configuration:
eth-id-00:0d:60:c1:e9:4d
Mar 30 22:23:59 SuSE10-2 SuSEfirewall2: Warning: ip6tables does not support
state matching. Extended IPv6 support disabled.
Mar 30 22:23:59 SuSE10-2 SuSEfirewall2: /var/lock/SuSEfirewall2.booting exists
which means system boot in progress, exit.
Mar 30 22:23:59 SuSE10-2 syslog-ng[2547]: SIGHUP received, restarting syslog-ng
Mar 30 22:23:59 SuSE10-2 logger: /etc/init.d/xdm: No changes for
/etc/X11/xdm/Xservers
Mar 30 22:23:59 SuSE10-2 logger: /etc/init.d/xdm: No changes for
/etc/X11/xdm/xdm-config
Mar 30 22:24:00 SuSE10-2 ifup-dhcp: IP/Netmask: 192.168.1.101
Mar 30 22:24:00 SuSE10-2 syslog-ng[2547]: new configuration initialized
Mar 30 22:24:00 SuSE10-2 ifup-dhcp: / 255.255.255.0
Mar 30 22:24:00 SuSE10-2 ifup-dhcp:
Mar 30 22:24:00 SuSE10-2 syslog-ng[2547]: Changing permissions on special file
/dev/xconsole
Mar 30 22:24:00 SuSE10-2 syslog-ng[2547]: Changing permissions on special file
/dev/tty10
Mar 30 22:24:00 SuSE10-2 kdm_config[3441]: Multiple occurrences of key
'Language' in section [X-*-Greeter] of /opt/kde3/share/config/kdm/kdmrc
Mar 30 22:24:00 SuSE10-2 kdm_config[3441]: Multiple occurrences of key
'ShowUsers' in section [X-*-Greeter] of /opt/kde3/share/config/kdm/kdmrc
Mar 30 22:24:00 SuSE10-2 kdm_config[3441]: Multiple occurrences of key
'UseBackground' in section [X-*-Greeter] of /opt/kde3/share/config/kdm/kdmrc
Mar 30 22:24:00 SuSE10-2 kdm_config[3441]: Multiple occurrences of key
'AllowShutdown' in section [X-:*-Core] of /opt/kde3/share/config/kdm/kdmrc
Mar 30 22:24:00 SuSE10-2 kdm_config[3441]: Multiple occurrences of key
'AutoLoginEnable' in section [X-:0-Core] of /opt/kde3/share/config/kdm/kdmrc
Mar 30 22:24:00 SuSE10-2 mDNSResponder (Engineering Build) (Nov 25 2006
12:30:24) [3516]: starting
Mar 30 22:24:00 SuSE10-2 kernel: IA-32 Microcode Update Driver: v1.14a
https://bugzilla.novell.com/show_bug.cgi?id=259721 judas_iscariote@shorewall.net changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |judas_iscariote@shorewall.net Status|NEW |NEEDINFO Info Provider| |heseltine@attglobal.net ------- Comment #1 from judas_iscariote@shorewall.net 2007-04-01 18:24 MST ------- can you try upgrading your motherboard BIOS and see if that solves the problem ? (vist the Motherboard vendor site for that) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259721 judas_iscariote@shorewall.net changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|bnc-team- |kernel-maintainers@forge.provo.novell.com |screening@forge.provo.novell| |.com | Severity|Major |Normal Status|NEEDINFO |NEW Component|Usability |Kernel Info Provider|heseltine@attglobal.net | -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259721 judas_iscariote@shorewall.net changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |heseltine@attglobal.net -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259721
heseltine@attglobal.net changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEEDINFO |NEW
Info Provider|heseltine@attglobal.net |
------- Comment #2 from heseltine@attglobal.net 2007-04-03 19:36 MST -------
Hello,
I updated the bios to the latest version on 2nd April. Its version is now
2DKT13AUS dated 23rd Nov 2005. This is the latest on the IBM/Lenovo site.
The machine continues to freeze. I attach the latest entries in the message log
file for the period just before and after the freeze. I've added some action
marks in upper case.
Many thanks,
Mark Heseltine
====== Message log begin ==========
Apr 3 05:00:45 SuSE10-2 syslog-ng[2526]: STATS: dropped 0
Apr 3 05:05:03 SuSE10-2 kernel: martian destination 0.0.0.0 from 192.168.1.1,
dev eth0
Apr 3 06:00:45 SuSE10-2 syslog-ng[2526]: STATS: dropped 0
Apr 3 06:05:11 SuSE10-2 kernel: martian destination 0.0.0.0 from 192.168.1.1,
dev eth0
Apr 3 07:00:46 SuSE10-2 syslog-ng[2526]: STATS: dropped 0
Apr 3 07:05:19 SuSE10-2 kernel: martian destination 0.0.0.0 from 192.168.1.1,
dev eth0
Apr 3 08:00:46 SuSE10-2 syslog-ng[2526]: STATS: dropped 0
Apr 3 08:05:28 SuSE10-2 kernel: martian destination 0.0.0.0 from 192.168.1.1,
dev eth0
SWITCHED IN VIA KVM SWITCH
Apr 3 08:39:50 SuSE10-2 kernel: usb 3-2: new full speed USB device using
uhci_hcd and address 26
Apr 3 08:39:50 SuSE10-2 kernel: usb 3-2: new device found, idVendor=0451,
idProduct=2046
Apr 3 08:39:50 SuSE10-2 kernel: usb 3-2: new device strings: Mfr=0, Product=0,
SerialNumber=0
Apr 3 08:39:50 SuSE10-2 kernel: usb 3-2: configuration #1 chosen from 1 choice
Apr 3 08:39:50 SuSE10-2 kernel: hub 3-2: 1.0: USB hub found
Apr 3 08:39:50 SuSE10-2 kernel: hub 3-2:1.0: 4 ports detected
Apr 3 08:39:51 SuSE10-2 kernel: usb 3-2.1: new low speed USB device using
uhci_hcd and address 27
Apr 3 08:39:51 SuSE10-2 kernel: usb 3-2.1: new device found, idVendor=0a81,
idProduct=0205
Apr 3 08:39:51 SuSE10-2 kernel: usb 3-2.1: new device strings: Mfr=1,
Product=2, SerialNumber=0
Apr 3 08:39:51 SuSE10-2 kernel: usb 3-2.1: Product: PS2 to USB Converter
Apr 3 08:39:51 SuSE10-2 kernel: usb 3-2.1: Manufacturer: CHESEN
Apr 3 08:39:51 SuSE10-2 kernel: usb 3-2.1: configuration #1 chosen from 1
choice
Apr 3 08:39:51 SuSE10-2 kernel: input: CHESEN PS2 to USB Converter as
/class/input/input26
Apr 3 08:39:51 SuSE10-2 kernel: input: USB HID v1.10 Keyboard [CHESEN PS2 to
USB Converter] on usb-0000:00:1d.2-2.1
Apr 3 08:39:51 SuSE10-2 kernel: input: CHESEN PS2 to USB Converter as
/class/input/input27
Apr 3 08:39:51 SuSE10-2 kernel: input: USB HID v1.10 Mouse [CHESEN PS2 to USB
Converter] on usb-0000:00:1d.2-2.1
Apr 3 08:39:51 SuSE10-2 kernel: usb 3-2.3: new low speed USB device using
uhci_hcd and address 28
Apr 3 08:39:51 SuSE10-2 kernel: usb 3-2.3: new device found, idVendor=04b3,
idProduct=310b
Apr 3 08:39:51 SuSE10-2 kernel: usb 3-2.3: new device strings: Mfr=0,
Product=0, SerialNumber=0
Apr 3 08:39:51 SuSE10-2 kernel: usb 3-2.3: configuration #1 chosen from 1
choice
Apr 3 08:39:51 SuSE10-2 kernel: input: HID 04b3:310b as /class/input/input28
Apr 3 08:39:51 SuSE10-2 kernel: input: USB HID v1.00 Mouse [HID 04b3:310b] on
usb-0000:00:1d.2-2.3
Apr 3 08:40:25 SuSE10-2 kernel: usb 3-2: USB disconnect, address 26
Apr 3 08:40:25 SuSE10-2 kernel: usb 3-2.1 : USB disconnect, address 27
Apr 3 08:40:25 SuSE10-2 kernel: usb 3-2.3: USB disconnect, address 28
SWITCH OUT VIA KVM SWITCH
Apr 3 09:00:46 SuSE10-2 syslog-ng[2526]: STATS: dropped 0
Apr 3 09:05:36 SuSE10-2 kernel: martian destination 0.0.0.0 from 192.168.1.1,
dev eth0
Apr 3 09:13:25 SuSE10-2 zmd: NetworkManagerModule (WARN): Failed to connect to
NetworkManager
Apr 3 09:18:31 SuSE10-2 zmd: Daemon (WARN): Not starting remote web server
Apr 3 10:00:46 SuSE10-2 syslog-ng[2526]: STATS: dropped 0
Apr 3 10:05:44 SuSE10-2 kernel: martian destination 0.0.0.0 from 192.168.1.1,
dev eth0
Apr 3 10:13:25 SuSE10-2 zmd: ShutdownManager (WARN): Preparing to sleep...
Apr 3 10:13:25 SuSE10-2 zmd: ShutdownManager (WARN): Going to sleep, waking up
at 04/04/2007 09:03:24
Apr 3 11:02:37 SuSE10-2 syslog-ng[2526]: STATS: dropped 0
Apr 3 11:05:53 SuSE10-2 kernel: martian destination 0.0.0.0 from 192.168.1.1,
dev eth0
Apr 3 12:06:01 SuSE10-2 kernel: martian destination 0.0.0.0 from 192.168.1.1,
dev eth0
Apr 3 12:06:01 SuSE10-2 syslog-ng[2526]: STATS: dropped 0
Apr 3 13:06:08 SuSE10-2 kernel: martian destination 0.0.0.0 from 192.168.1.1 ,
dev eth0
Apr 3 13:06:08 SuSE10-2 syslog-ng[2526]: STATS: dropped 0
Apr 3 14:06:16 SuSE10-2 kernel: martian destination 0.0.0.0 from 192.168.1.1,
dev eth0
Apr 3 14:06:16 SuSE10-2 syslog-ng[2526]: STATS: dropped 0
Apr 3 15:06:25 SuSE10-2 kernel: martian destination 0.0.0.0 from 192.168.1.1,
dev eth0
Apr 3 15:06:25 SuSE10-2 syslog-ng[2526]: STATS: dropped 0
Apr 3 16:06:33 SuSE10-2 kernel: martian destination 0.0.0.0 from 192.168.1.1,
dev eth0
Apr 3 16:06:33 SuSE10-2 syslog-ng[2526]: STATS: dropped 0
Apr 3 16:16:23 SuSE10-2 zmd: NetworkManagerModule (WARN): Failed to connect to
NetworkManager
Apr 3 16:42:18 SuSE10-2 zmd: Daemon (WARN): Not starting remote web server
Apr 3 17:06:41 SuSE10-2 kernel: martian destination 0.0.0.0 from 192.168.1.1 ,
dev eth0
Apr 3 17:06:41 SuSE10-2 syslog-ng[2526]: STATS: dropped 0
Apr 3 17:38:11 SuSE10-2 zmd: ShutdownManager (WARN): Preparing to sleep...
Apr 3 17:38:11 SuSE10-2 zmd: ShutdownManager (WARN): Going to sleep, waking up
at 04/04/2007 16:05:18
Apr 3 18:06:49 SuSE10-2 kernel: martian destination 0.0.0.0 from 192.168.1.1,
dev eth0
Apr 3 18:06:49 SuSE10-2 syslog-ng[2526]: STATS: dropped 0
Apr 3 19:29:33 SuSE10-2 syslog-ng[2604]: syslog-ng version 1.6.11 starting
Apr 3 19:29:34 SuSE10-2 rchal: CPU frequency scaling is not supported by your
processor.
Apr 3 19:29:34 SuSE10-2 rchal: boot with 'CPUFREQ=no' in to avoid this
warning.
Apr 3 19:29:34 SuSE10-2 rchal: Cannot load cpufreq governors - No cpufreq
driver available
Apr 3 19:29:35 SuSE10-2 ifstatus: lo
Apr 3 19:29:35 SuSE10-2 ifstatus: lo is up
Apr 3 19:29:35 SuSE10-2 ifstatus: 1: lo:
https://bugzilla.novell.com/show_bug.cgi?id=259721 ------- Comment #3 from heseltine@attglobal.net 2007-04-20 20:55 MST ------- Hello again, I've re-installed SuSE Linux 10.2. The following is the 1st version of the contents of the file var/log/boot.msg after a clean install with updates but without NOAPIC added to the boot line. The next message will be with the addition of the NOAPIC command to the boot loader. Hope all of this helps. Regards, Mark Heseltine =============== Begin new install boot.msg contents ============= Inspecting /boot/System.map-2.6.18.2-34-default Loaded 23374 symbols from /boot/System.map-2.6.18.2-34-default. Symbols match kernel version 2.6.18. No module symbols loaded - kernel modules not enabled. klogd 1.4.1, log source = ksyslog started. <5>Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable) <4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000003df70000 (usable) <4> BIOS-e820: 000000003df70000 - 000000003df7a000 (ACPI data) <4> BIOS-e820: 000000003df7a000 - 000000003df80000 (ACPI NVS) <4> BIOS-e820: 000000003df80000 - 0000000040000000 (reserved) <4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) <4> BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) <5>95MB HIGHMEM available. <5>896MB LOWMEM available. <6>found SMP MP-table at 000f66f0 <7>On node 0 totalpages: 253808 <7> DMA zone: 4096 pages, LIFO batch:0 <7> Normal zone: 225280 pages, LIFO batch:31 <7> HighMem zone: 24432 pages, LIFO batch:3 <6>DMI present. <6>Using APIC driver default <6>IO/L-APIC allowed because system is MP or new enough <7>ACPI: RSDP (v000 PTLTD ) @ 0x000f67a0 <7>ACPI: RSDT (v001 PTLTD RSDT 0x060400d0 LTP 0x00000000) @ 0x3df75269 <7>ACPI: FADT (v001 IBM THINKCEN 0x060400d0 PTL 0x00000001) @ 0x3df79e9d <7>ACPI: TCPA (v001 IBM THINKCEN 0x060400d0 PTL 0x00000001) @ 0x3df79f11 <7>ACPI: MADT (v001 PTLTD APIC 0x060400d0 LTP 0x00000000) @ 0x3df79f43 <7>ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x060400d0 LTP 0x00000001) @ 0x3df79fa1 <7>ACPI: SSDT (v001 PTLTD ACPIHT 0x060400d0 LTP 0x00000001) @ 0x3df79fc9 <7>ACPI: DSDT (v001 IBM THINKCEN 0x060400d0 MSFT 0x0100000e) @ 0x00000000 <6>ACPI: PM-Timer IO Port: 0x1008 <7>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) <4>Processor #0 15:4 APIC version 20 <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) <4>Processor #1 15:4 APIC version 20 <6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) <6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) <6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) <4>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <7>ACPI: IRQ9 used by override. <4>Enabling APIC mode: Flat. Using 1 I/O APICs <6>Using ACPI (MADT) for SMP configuration information <4>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) <4>Detected 3192.329 MHz processor. <4>Built 1 zonelists. Total pages: 253808 <5>Kernel command line: root=/dev/hda2 vga=0x31a resume=/dev/hda1 splash=silent <6>bootsplash: silent mode. <7>mapped APIC to ffffd000 (fee00000) <7>mapped IOAPIC to ffffc000 (fec00000) <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Initializing CPU#0 <4>PID hash table entries: 4096 (order: 12, 16384 bytes) <4>Console: colour dummy device 80x25 <4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>Memory: 999340k/1015232k available (1697k kernel code, 15280k reserved, 968k data, 196k init, 97728k highmem) <4>Checking if this processor honours the WP bit even in supervisor mode... Ok. <4>Calibrating delay using timer specific routine.. 6388.79 BogoMIPS (lpj=12777585) <6>Security Framework v1.0.0 initialized <4>Mount-cache hash table entries: 512 <7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 <7>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 <4>monitor/mwait feature present. <4>using mwait in idle threads. <6>CPU: Trace cache: 12K uops, L1 D cache: 16K <6>CPU: L2 cache: 1024K <6>CPU: Physical Processor ID: 0 <7>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000180 0000441d 00000000 00000000 <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <6>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available <6>CPU0: Thermal monitoring enabled <4>Compat vDSO mapped to ffffe000. <6>Checking 'hlt' instruction... OK. <6>SMP alternatives: switching to UP code <6>checking if image is initramfs... it is <6>Freeing initrd memory: 3180k freed <6>ACPI: Core revision 20060707 <4>CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01 <6>SMP alternatives: switching to SMP code <4>Booting processor 1/1 eip 3000 <6>Initializing CPU#1 <4>Calibrating delay using timer specific routine.. 6384.52 BogoMIPS (lpj=12769040) <7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 <7>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 <4>monitor/mwait feature present. <6>CPU: Trace cache: 12K uops, L1 D cache: 16K <6>CPU: L2 cache: 1024K <6>CPU: Physical Processor ID: 0 <7>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000180 0000441d 00000000 00000000 <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#1. <6>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available <6>CPU1: Thermal monitoring enabled <4>CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01 <6>Total of 2 processors activated (12773.31 BogoMIPS). <4>ENABLING IO-APIC IRQs <6>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 <6>checking TSC synchronization across 2 CPUs: passed. <6>Brought up 2 CPUs <4>migration_cost=74 <6>NET: Registered protocol family 16 <6>ACPI: bus type pci registered <6>PCI: PCI BIOS revision 2.10 entry at 0xfd9cd, last bus=3 <6>PCI: Using configuration type 1 <4>Setting up standard PCI resources <6>ACPI: Interpreter enabled <6>ACPI: Using IOAPIC for interrupt routing <6>ACPI: PCI Root Bridge [PCI0] (0000:00) <7>PCI: Probing PCI hardware (bus 00) <7>Boot video device is 0000:00:02.0 <4>PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO <4>PCI quirk: region 1180-11bf claimed by ICH4 GPIO <6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 <6>PCI: Transparent bridge - 0000:00:1e.0 <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SLOT._PRT] <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. <4>ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 9 10 11 12 14 15) <6>Linux Plug and Play Support v0.97 (c) Adam Belay <6>pnp: PnP ACPI init <6>pnp: PnP ACPI: found 14 devices <6>PnPBIOS: Disabled by ACPI PNP <6>PCI: Using ACPI for IRQ routing <6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report <4>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 <6>PCI: Bridge: 0000:00:1e.0 <6> IO window: 2000-2fff <6> MEM window: e8100000-e81fffff <6> PREFETCH window: disabled. <7>PCI: Setting latency timer of device 0000:00:1e.0 to 64 <6>NET: Registered protocol family 2 <4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes) <4>TCP established hash table entries: 131072 (order: 8, 1048576 bytes) <4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes) <6>TCP: Hash tables configured (established 131072 bind 65536) <6>TCP reno registered <6>Simple Boot Flag at 0x35 set to 0x1 <6>Machine check exception polling timer started. <6>IBM machine detected. Enabling interrupts during APM calls. <6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) <5>apm: disabled - APM is not SMP safe. <6>audit: initializing netlink socket (disabled) <5>audit(1177101684.120:1): initialized <4>highmem bounce pool size: 64 pages <4>Total HugeTLB memory allocated, 0 <5>VFS: Disk quotas dquot_6.5.1 <4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>Initializing Cryptographic API <6>io scheduler noop registered <6>io scheduler anticipatory registered <6>io scheduler deadline registered <6>io scheduler cfq registered (default) <6>vesafb: framebuffer at 0xf0000000, mapped to 0xf8880000, using 10240k, total 32576k <6>vesafb: mode is 1280x1024x16, linelength=2560, pages=11 <6>vesafb: protected mode interface info at 00ff:44f0 <6>vesafb: scrolling: redraw <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 <6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 107318 bytes,<6>...found (1280x1024, 59769 bytes, v3). <4>Console: switching to colour frame buffer device 156x60 <6>fb0: VESA VGA frame buffer device <6>isapnp: Scanning for PnP cards... <6>isapnp: No Plug & Play device found <6>Real Time Clock Driver v1.12ac <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled <6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>FDC 0 is a post-1991 82077 <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PSM] at 0x60,0x64 irq 1,12 <6>serio: i8042 AUX port at 0x60,0x64 irq 12 <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>mice: PS/2 mouse device common for all mice <6>input: PC Speaker as /class/input/input0 <6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: bitmap version 4.39 <6>NET: Registered protocol family 1 <4>Using IPI No-Shortcut mode <6>ACPI: (supports S0 S1 S4 S5) <6>Freeing unused kernel memory: 196k freed <6>Time: tsc clocksource has been installed. <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>ACPI: Processor [CPU0] (supports 8 throttling states) <6>ACPI: Processor [CPU1] (supports 8 throttling states) <6>ACPI: Thermal Zone [THM0] (64 C) <6>ICH5: IDE controller at PCI slot 0000:00:1f.1 <4>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) <6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 177 <6>ICH5: chipset revision 2 <6>ICH5: not 100% native mode: will probe irqs later <6> ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio <6> ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:DMA, hdd:pio <7>Probing IDE interface ide0... <4>hda: ST3160023A, ATA DISK drive <6>input: ImPS/2 Generic Wheel Mouse as /class/input/input1 <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <6>hda: max request size: 512KiB <6>hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100) <6>hda: cache flushes supported <6> hda: hda1 hda2 hda3 <7>Probing IDE interface ide1... <4>hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4243N, ATAPI CD/DVD-ROM drive <4>ide1 at 0x170-0x177,0x376 on irq 15 <6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found <4>Attempting manual resume <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hda2, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>parport: PnPBIOS parport detected. <6>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] <6>lp0: using parport0 (interrupt-driven). <6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5 <6>Linux agpgart interface v0.101 (c) Dave Jones <6>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 185 <6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 <6>agpgart: Detected an Intel 865 Chipset. <6>agpgart: Detected 32636K stolen memory. <6>agpgart: AGP aperture is 128M @ 0xf0000000 <6>usbcore: registered new driver usbfs <6>usbcore: registered new driver hub <6>i8xx TCO timer: initialized (0x1060). heartbeat=30 sec (nowayout=0) <6>USB Universal Host Controller Interface driver v3.0 <6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 193 <7>PCI: Setting latency timer of device 0000:00:1d.0 to 64 <6>uhci_hcd 0000:00:1d.0: UHCI Host Controller <6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 <6>uhci_hcd 0000:00:1d.0: irq 193, io base 0x00001820 <6>usb usb1: new device found, idVendor=0000, idProduct=0000 <6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb1: Product: UHCI Host Controller <6>usb usb1: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd <6>usb usb1: SerialNumber: 0000:00:1d.0 <6>usb usb1: configuration #1 chosen from 1 choice <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 2 ports detected <6>Intel(R) PRO/1000 Network Driver - version 7.1.9-k4-NAPI <6>Copyright (c) 1999-2006 Intel Corporation. <6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 201 <7>PCI: Setting latency timer of device 0000:00:1d.1 to 64 <6>uhci_hcd 0000:00:1d.1: UHCI Host Controller <6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 <6>uhci_hcd 0000:00:1d.1: irq 201, io base 0x00001840 <6>usb usb2: new device found, idVendor=0000, idProduct=0000 <6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb2: Product: UHCI Host Controller <6>usb usb2: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd <6>usb usb2: SerialNumber: 0000:00:1d.1 <6>usb usb2: configuration #1 chosen from 1 choice <6>hub 2-0:1.0: USB hub found <6>hub 2-0:1.0: 2 ports detected <6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 177 <7>PCI: Setting latency timer of device 0000:00:1d.2 to 64 <6>uhci_hcd 0000:00:1d.2: UHCI Host Controller <3>intel_rng: FWH not detected <6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 <6>uhci_hcd 0000:00:1d.2: irq 177, io base 0x00001860 <6>usb usb3: new device found, idVendor=0000, idProduct=0000 <6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb3: Product: UHCI Host Controller <6>usb usb3: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd <6>usb usb3: SerialNumber: 0000:00:1d.2 <6>usb usb3: configuration #1 chosen from 1 choice <6>hub 3-0:1.0: USB hub found <6>hub 3-0:1.0: 2 ports detected <6>hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) <6>Uniform CD-ROM driver Revision: 3.20 <6>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 193 <7>PCI: Setting latency timer of device 0000:00:1d.3 to 64 <6>uhci_hcd 0000:00:1d.3: UHCI Host Controller <6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 <6>uhci_hcd 0000:00:1d.3: irq 193, io base 0x00001880 <6>usb usb4: new device found, idVendor=0000, idProduct=0000 <6>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb4: Product: UHCI Host Controller <6>usb usb4: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd <6>usb usb4: SerialNumber: 0000:00:1d.3 <6>usb usb4: configuration #1 chosen from 1 choice <6>hub 4-0:1.0: USB hub found <6>hub 4-0:1.0: 2 ports detected <6>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 185 <7>PCI: Setting latency timer of device 0000:00:1f.5 to 64 <6>usb 3-2: new full speed USB device using uhci_hcd and address 2 <6>usb 3-2: new device found, idVendor=0451, idProduct=2046 <6>usb 3-2: new device strings: Mfr=0, Product=0, SerialNumber=0 <6>usb 3-2: configuration #1 chosen from 1 choice <6>hub 3-2:1.0: USB hub found <6>hub 3-2:1.0: 4 ports detected <6>intel8x0_measure_ac97_clock: measured 58042 usecs <6>intel8x0: clocking to 48000 <6>ACPI: PCI Interrupt 0000:03:0b.0[A] -> GSI 16 (level, low) -> IRQ 193 <6>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 209 <7>PCI: Setting latency timer of device 0000:00:1d.7 to 64 <6>ehci_hcd 0000:00:1d.7: EHCI Host Controller <6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 <6>ehci_hcd 0000:00:1d.7: debug port 1 <7>PCI: cache line size of 128 is not supported by device 0000:00:1d.7 <6>ehci_hcd 0000:00:1d.7: irq 209, io mem 0xe8080000 <6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 <6>usb usb5: new device found, idVendor=0000, idProduct=0000 <6>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb5: Product: EHCI Host Controller <6>usb usb5: Manufacturer: Linux 2.6.18.2-34-default ehci_hcd <6>usb usb5: SerialNumber: 0000:00:1d.7 <6>usb usb5: configuration #1 chosen from 1 choice <6>hub 5-0:1.0: USB hub found <6>hub 5-0:1.0: 8 ports detected <3>hub 3-2:1.0: hub_port_status failed (err = -71) <3>hub 3-2:1.0: connect-debounce failed, port 1 disabled <3>hub 3-2:1.0: cannot disable port 1 (err = -71) <3>hub 3-2:1.0: hub_port_status failed (err = -71) <3>hub 3-2:1.0: hub_port_status failed (err = -71) <3>hub 3-2:1.0: hub_port_status failed (err = -71) <6>usb 3-2: USB disconnect, address 2 <6>e1000: 0000:03:0b.0: e1000_probe: (PCI:33MHz:32-bit) 00:0d:60:c1:e9:4d <6>usb 3-2: new full speed USB device using uhci_hcd and address 3 <6>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection <6>usb 3-2: new device found, idVendor=0451, idProduct=2046 <6>usb 3-2: new device strings: Mfr=0, Product=0, SerialNumber=0 <6>usb 3-2: configuration #1 chosen from 1 choice <6>hub 3-2:1.0: USB hub found <6>hub 3-2:1.0: 4 ports detected <6>Adding 2104472k swap on /dev/hda1. Priority:-1 extents:1 across:2104472k <6>usb 3-2.1: new low speed USB device using uhci_hcd and address 4 <6>usb 3-2.1: new device found, idVendor=0a81, idProduct=0205 <6>usb 3-2.1: new device strings: Mfr=1, Product=2, SerialNumber=0 <6>usb 3-2.1: Product: PS2 to USB Converter <6>usb 3-2.1: Manufacturer: CHESEN <6>usb 3-2.1: configuration #1 chosen from 1 choice <6>usb 3-2.3: new low speed USB device using uhci_hcd and address 5 <6>usb 3-2.3: new device found, idVendor=04b3, idProduct=310b <6>usb 3-2.3: new device strings: Mfr=0, Product=0, SerialNumber=0 <6>usb 3-2.3: configuration #1 chosen from 1 choice <6>usbcore: registered new driver hiddev <6>input: CHESEN PS2 to USB Converter as /class/input/input2 <6>input: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-2.1 <6>input: CHESEN PS2 to USB Converter as /class/input/input3 <6>input: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-2.1 <6>input: HID 04b3:310b as /class/input/input4 <6>input: USB HID v1.00 Mouse [HID 04b3:310b] on usb-0000:00:1d.2-2.3 <6>usbcore: registered new driver usbhid <6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver <6>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com <6>loop: loaded (max 8 devices) <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hda3, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>AppArmor: AppArmor initialized <5>audit(1177101738.595:2): AppArmor initialized <4> Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Fri Apr 20 20:41:24 2007 Trying manual resume from /dev/hda1 Creating device nodes with udev Loading ide-core Loading ide-disk Loading processor Loading thermal Loading piix Loading fan Loading edd Loading jbd Loading mbcache Loading ext3 Invoking userspace resume from /dev/hda1 resume: Could not stat configuration file resume: libgcrypt version: 1.2.3 resume: Could not read the image Invoking in-kernel resume from /dev/hda1 Waiting for device /dev/hda2 to appear: ok fsck 1.39 (29-May-2006) [/bin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/hda2 /dev/hda2: recovering journal /dev/hda2: Clearing orphaned inode 2249088 (uid=0, gid=0, mode=0100755, size=533224) /dev/hda2: clean, 129004/2626560 files, 871681/5242880 blocks fsck succeeded. Mounting root device read-write. Mounting root /dev/hda2 Boot logging started on /dev/tty1(/dev/console (deleted)) at Fri Apr 20 14:42:10 2007 <notice>boot.udev start Starting udevd done <notice>'boot.udev start' exits with status 0 <notice>boot.rootfsck start Activating swap-devices in /etc/fstab... done<notice>'boot.rootfsck start' exits with status 0 <notice>boot.loadmodules start Loading required kernel modules done<notice>'boot.loadmodules start' exits with status 0 <notice>boot.preload_early start done <notice>'boot.preload_early start' exits with status 0 <notice>boot.device-mapper start Activating device mapper... done <notice>'boot.device-mapper start' exits with status 0 <notice>boot.md start Starting MD Raid done <notice>'boot.md start' exits with status 0 <notice>boot.lvm start Waiting for udev to settle... Scanning for LVM volume groups... Reading all physical volumes. This may take a while... No volume groups found No volume groups found Activating LVM volume groups... No volume groups found done <notice>'boot.lvm start' exits with status 0 <notice>boot.localfs start Checking file systems... fsck 1.39 (29-May-2006) /dev/hda3: Superblock last write time is in the future. FIXED. /dev/hda3: clean, 35/16662528 files, 571067/33302745 blocks donedone Mounting local file systems... proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) debugfs on /sys/kernel/debug type debugfs (rw) udev on /dev type tmpfs (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/hda3 on /home type ext3 (rw,acl,user_xattr) done<notice>'boot.localfs start' exits with status 0 <notice>boot.apparmor start Loading AppArmor module done Mounting securityfs on /sys/kernel/security done Loading AppArmor profiles done <notice>'boot.apparmor start' exits with status 0 <notice>boot.cleanup start <notice>'boot.cleanup start' exits with status 0 <notice>boot.clock start Setting up the hardware clockdone <notice>'boot.clock start' exits with status 0 <notice>boot.cycle start <notice>'boot.cycle start' exits with status 6 <notice>boot.klog start Creating /var/log/boot.msg done<notice>killproc: kill(839,29) <notice>'boot.klog start' exits with status 0 <notice>boot.proc start <notice>'boot.proc start' exits with status 0 <notice>boot.scpm start <notice>'boot.scpm start' exits with status 0 <notice>boot.sysctl start Setting current sysctl status from /etc/sysctl.conf net.ipv4.icmp_echo_ignore_broadcasts = 1 net.ipv4.conf.all.rp_filter = 1 done <notice>'boot.sysctl start' exits with status 0 <notice>boot.udev_retry start <notice>'boot.udev_retry start' exits with status 0 <notice>boot.videobios start Patching video bios Intel 800/900 Series VBIOS Hack : version 0.5.2 Chipset: 865G BIOS: TYPE 1 Mode Table Offset: $C0000 + $269 Mode Table Entries: 27 Patch mode 3c to resolution 1600x1200 complete done <notice>'boot.videobios start' exits with status 0 <notice>boot.crypto start <notice>'boot.crypto start' exits with status 0 <notice>boot.ipconfig start Enabling syn flood protectiondone Disabling IP forwardingdone done <notice>'boot.ipconfig start' exits with status 0 <notice>boot.localnet start Setting up hostname 'linux-01ha'done Setting up loopback interface lo lo IP address: 127.0.0.1/8 done <notice>'boot.localnet start' exits with status 0 <notice>boot.preload start done <notice>'boot.preload start' exits with status 0 <notice>boot.swap start Activating remaining swap-devices in /etc/fstab... done<notice>'boot.swap start' exits with status 0 <notice>SuSEfirewall2_init start Starting Firewall Initialization (phase 1 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. done <notice>'SuSEfirewall2_init start' exits with status 0 <notice>boot.ldconfig start <notice>'boot.ldconfig start' exits with status 0 System Boot Control: The system has been set up Skipped features: boot.cycle System Boot Control: Running /etc/init.d/boot.local done<notice>killproc: kill(839,3) INIT: Entering runlevel: 5 Boot logging started on /dev/tty1(/dev/console) at Fri Apr 20 20:42:29 2007 Master Resource Control: previous runlevel: N, switching to runlevel: 5 <notice>done CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/syslog-ng ] Initializing random number generatordone <notice>startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ] <notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/resmgrd ] <notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/acpid ] <notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/klogd ] Loading AppArmor profiles - AppArmor already loaded with profiles.skipped Starting syslog servicesdone Starting resource managerdone acpid: loading ACPI modules ( ac battery button ) done acpid: will not skip unsupported modules acpid: loading ACPI laptop modules ( ) done Starting acpid done Starting irqbalance unused Starting D-Bus daemondone startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [<notice>startproc: execve (/usr/sbin/polkitd) [ /usr/sbin/polkitd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/polkitd ] Starting PolicyKit daemondone <notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/hald ] Starting HAL daemondone Loading CPUFreq modulesLoading keymap i386/qwerty/uk.map.gz doneLoading compose table winkeys shiftctrl latin1.adddone Start Unicode mode doneLoading console font lat9w-16.psfu -m trivial G0:loadable done (CPUFreq not supported) <notice>pidofproc: dhcpcd 3237 <notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ LANG=en_GB.UTF-8 PREVLEVEL=N LINES=60 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/bin/kde SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ] Starting service kdmdone Setting up network interfaces: lo lo IP address: 127.0.0.1/8 done eth0 device: Intel Corporation 82541EI Gigabit Ethernet Controller eth0 configuration: eth-id-00:0d:60:c1:e9:4d eth0 (DHCP) . . IP/Netmask: 192.168.1.101 / 255.255.255.0 <notice>killproc: kill(2580,20) <notice>killproc: kill(2521,1) <notice>killproc: kill(2580,18) <notice>killproc: kill(2580,12) doneSetting up service network . . . . . . . . . . . . . . . done <notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/portmap ] Starting RPC portmap daemondone Importing Net File System (NFS)unused Starting nfsboot (sm-notify) done <notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ] <notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -n ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/auditd ] <notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] Starting Name Service Cache Daemondone Starting cupsddone Starting auditd Checking/updating CPU microcode done done Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] <notice>checkproc: /opt/kde3/bin/kdm 3413 done Starting ZENworks Management Daemondone <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ] Starting powersaved: done Starting mail service (Postfix)done Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/cron ] done Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. done Master Resource Control: runlevel 5 has been reached Skipped services in runlevel 5: irq_balancer nfs <notice>killproc: kill(2461,3) =============== End new install boot.msg contents ============= -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259721 ------- Comment #4 from heseltine@attglobal.net 2007-04-20 21:19 MST ------- Hello for the 3rd time. I've added, below, the ver/log/boot.msg file as it existed after (1) first making a clean install of SuSE Linux 10.2 (with update) and then rebooting as normal, (2) rebooting but forgetting to add NOAPIC to the boot line, and (3) rebooting with NOAPIC. Again, hope this helps. Please suggest any further information that would be of use. Many thanks, Mark Heseltine ============== begin boot.msg contents after reboot with NOAPIC ================ Inspecting /boot/System.map-2.6.18.2-34-default Loaded 23374 symbols from /boot/System.map-2.6.18.2-34-default. Symbols match kernel version 2.6.18. No module symbols loaded - kernel modules not enabled. klogd 1.4.1, log source = ksyslog started. <5>Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable) <4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000003df70000 (usable) <4> BIOS-e820: 000000003df70000 - 000000003df7a000 (ACPI data) <4> BIOS-e820: 000000003df7a000 - 000000003df80000 (ACPI NVS) <4> BIOS-e820: 000000003df80000 - 0000000040000000 (reserved) <4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) <4> BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) <5>95MB HIGHMEM available. <5>896MB LOWMEM available. <6>found SMP MP-table at 000f66f0 <7>On node 0 totalpages: 253808 <7> DMA zone: 4096 pages, LIFO batch:0 <7> Normal zone: 225280 pages, LIFO batch:31 <7> HighMem zone: 24432 pages, LIFO batch:3 <6>DMI present. <6>Using APIC driver default <6>IO/L-APIC allowed because system is MP or new enough <7>ACPI: RSDP (v000 PTLTD ) @ 0x000f67a0 <7>ACPI: RSDT (v001 PTLTD RSDT 0x060400d0 LTP 0x00000000) @ 0x3df75269 <7>ACPI: FADT (v001 IBM THINKCEN 0x060400d0 PTL 0x00000001) @ 0x3df79e9d <7>ACPI: TCPA (v001 IBM THINKCEN 0x060400d0 PTL 0x00000001) @ 0x3df79f11 <7>ACPI: MADT (v001 PTLTD APIC 0x060400d0 LTP 0x00000000) @ 0x3df79f43 <7>ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x060400d0 LTP 0x00000001) @ 0x3df79fa1 <7>ACPI: SSDT (v001 PTLTD ACPIHT 0x060400d0 LTP 0x00000001) @ 0x3df79fc9 <7>ACPI: DSDT (v001 IBM THINKCEN 0x060400d0 MSFT 0x0100000e) @ 0x00000000 <6>ACPI: PM-Timer IO Port: 0x1008 <7>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) <4>Processor #0 15:4 APIC version 20 <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) <4>Processor #1 15:4 APIC version 20 <6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) <6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) <6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) <4>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <7>ACPI: IRQ9 used by override. <4>Enabling APIC mode: Flat. Using 1 I/O APICs <6>Using ACPI (MADT) for SMP configuration information <4>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) <4>Detected 3192.290 MHz processor. <4>Built 1 zonelists. Total pages: 253808 <5>Kernel command line: root=/dev/hda2 vga=0x31a resume=/dev/hda1 splash=silent NOAPIC <6>bootsplash: silent mode. <7>mapped APIC to ffffd000 (fee00000) <7>mapped IOAPIC to ffffc000 (fec00000) <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Initializing CPU#0 <4>PID hash table entries: 4096 (order: 12, 16384 bytes) <4>Console: colour dummy device 80x25 <4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>Memory: 999340k/1015232k available (1697k kernel code, 15280k reserved, 968k data, 196k init, 97728k highmem) <4>Checking if this processor honours the WP bit even in supervisor mode... Ok. <4>Calibrating delay using timer specific routine.. 6388.83 BogoMIPS (lpj=12777670) <6>Security Framework v1.0.0 initialized <4>Mount-cache hash table entries: 512 <7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 <7>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 <4>monitor/mwait feature present. <4>using mwait in idle threads. <6>CPU: Trace cache: 12K uops, L1 D cache: 16K <6>CPU: L2 cache: 1024K <6>CPU: Physical Processor ID: 0 <7>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000180 0000441d 00000000 00000000 <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <6>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available <6>CPU0: Thermal monitoring enabled <4>Compat vDSO mapped to ffffe000. <6>Checking 'hlt' instruction... OK. <6>SMP alternatives: switching to UP code <6>checking if image is initramfs... it is <6>Freeing initrd memory: 3180k freed <6>ACPI: Core revision 20060707 <4>CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01 <6>SMP alternatives: switching to SMP code <4>Booting processor 1/1 eip 3000 <6>Initializing CPU#1 <4>Calibrating delay using timer specific routine.. 6384.48 BogoMIPS (lpj=12768968) <7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 <7>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 <4>monitor/mwait feature present. <6>CPU: Trace cache: 12K uops, L1 D cache: 16K <6>CPU: L2 cache: 1024K <6>CPU: Physical Processor ID: 0 <7>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000180 0000441d 00000000 00000000 <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#1. <6>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available <6>CPU1: Thermal monitoring enabled <4>CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01 <6>Total of 2 processors activated (12773.31 BogoMIPS). <4>ENABLING IO-APIC IRQs <6>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 <6>checking TSC synchronization across 2 CPUs: passed. <6>Brought up 2 CPUs <4>migration_cost=99 <6>NET: Registered protocol family 16 <6>ACPI: bus type pci registered <6>PCI: PCI BIOS revision 2.10 entry at 0xfd9cd, last bus=3 <6>PCI: Using configuration type 1 <4>Setting up standard PCI resources <6>ACPI: Interpreter enabled <6>ACPI: Using IOAPIC for interrupt routing <6>ACPI: PCI Root Bridge [PCI0] (0000:00) <7>PCI: Probing PCI hardware (bus 00) <7>Boot video device is 0000:00:02.0 <4>PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO <4>PCI quirk: region 1180-11bf claimed by ICH4 GPIO <6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 <6>PCI: Transparent bridge - 0000:00:1e.0 <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SLOT._PRT] <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. <4>ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 9 10 11 12 14 15) <6>Linux Plug and Play Support v0.97 (c) Adam Belay <6>pnp: PnP ACPI init <6>pnp: PnP ACPI: found 14 devices <6>PnPBIOS: Disabled by ACPI PNP <6>PCI: Using ACPI for IRQ routing <6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report <4>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 <6>PCI: Bridge: 0000:00:1e.0 <6> IO window: 2000-2fff <6> MEM window: e8100000-e81fffff <6> PREFETCH window: disabled. <7>PCI: Setting latency timer of device 0000:00:1e.0 to 64 <6>NET: Registered protocol family 2 <4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes) <4>TCP established hash table entries: 131072 (order: 8, 1048576 bytes) <4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes) <6>TCP: Hash tables configured (established 131072 bind 65536) <6>TCP reno registered <6>Simple Boot Flag at 0x35 set to 0x1 <6>Machine check exception polling timer started. <6>IBM machine detected. Enabling interrupts during APM calls. <6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) <5>apm: disabled - APM is not SMP safe. <6>audit: initializing netlink socket (disabled) <5>audit(1177102954.124:1): initialized <4>highmem bounce pool size: 64 pages <4>Total HugeTLB memory allocated, 0 <5>VFS: Disk quotas dquot_6.5.1 <4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>Initializing Cryptographic API <6>io scheduler noop registered <6>io scheduler anticipatory registered <6>io scheduler deadline registered <6>io scheduler cfq registered (default) <6>vesafb: framebuffer at 0xf0000000, mapped to 0xf8880000, using 10240k, total 32576k <6>vesafb: mode is 1280x1024x16, linelength=2560, pages=11 <6>vesafb: protected mode interface info at 00ff:44f0 <6>vesafb: scrolling: redraw <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 <6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 107318 bytes,<6>...found (1280x1024, 59769 bytes, v3). <4>Console: switching to colour frame buffer device 156x60 <6>fb0: VESA VGA frame buffer device <6>isapnp: Scanning for PnP cards... <6>isapnp: No Plug & Play device found <6>Real Time Clock Driver v1.12ac <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled <6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>FDC 0 is a post-1991 82077 <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PSM] at 0x60,0x64 irq 1,12 <6>serio: i8042 AUX port at 0x60,0x64 irq 12 <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>mice: PS/2 mouse device common for all mice <6>input: PC Speaker as /class/input/input0 <6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: bitmap version 4.39 <6>NET: Registered protocol family 1 <4>Using IPI No-Shortcut mode <6>Time: tsc clocksource has been installed. <6>ACPI: (supports S0 S1 S4 S5) <6>Freeing unused kernel memory: 196k freed <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>ACPI: Processor [CPU0] (supports 8 throttling states) <6>ACPI: Processor [CPU1] (supports 8 throttling states) <6>ACPI: Thermal Zone [THM0] (65 C) <6>ICH5: IDE controller at PCI slot 0000:00:1f.1 <4>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) <6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 177 <6>ICH5: chipset revision 2 <6>ICH5: not 100% native mode: will probe irqs later <6> ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio <6> ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:DMA, hdd:pio <7>Probing IDE interface ide0... <4>hda: ST3160023A, ATA DISK drive <6>input: ImPS/2 Generic Wheel Mouse as /class/input/input1 <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <6>hda: max request size: 512KiB <6>hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100) <6>hda: cache flushes supported <6> hda: hda1 hda2 hda3 <7>Probing IDE interface ide1... <4>hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4243N, ATAPI CD/DVD-ROM drive <4>ide1 at 0x170-0x177,0x376 on irq 15 <6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found <4>Attempting manual resume <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hda2, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>parport: PnPBIOS parport detected. <6>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] <6>lp0: using parport0 (interrupt-driven). <6>Linux agpgart interface v0.101 (c) Dave Jones <6>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 185 <7>PCI: Setting latency timer of device 0000:00:1f.5 to 64 <6>i8xx TCO timer: initialized (0x1060). heartbeat=30 sec (nowayout=0) <6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5 <6>usbcore: registered new driver usbfs <6>usbcore: registered new driver hub <6>hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) <6>Uniform CD-ROM driver Revision: 3.20 <6>USB Universal Host Controller Interface driver v3.0 <3>intel_rng: FWH not detected <6>intel8x0_measure_ac97_clock: measured 53966 usecs <6>intel8x0: clocking to 48000 <6>agpgart: Detected an Intel 865 Chipset. <6>agpgart: Detected 32636K stolen memory. <6>agpgart: AGP aperture is 128M @ 0xf0000000 <6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 193 <7>PCI: Setting latency timer of device 0000:00:1d.0 to 64 <6>uhci_hcd 0000:00:1d.0: UHCI Host Controller <6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 <6>uhci_hcd 0000:00:1d.0: irq 193, io base 0x00001820 <6>usb usb1: new device found, idVendor=0000, idProduct=0000 <6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb1: Product: UHCI Host Controller <6>usb usb1: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd <6>usb usb1: SerialNumber: 0000:00:1d.0 <6>usb usb1: configuration #1 chosen from 1 choice <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 2 ports detected <6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 201 <7>PCI: Setting latency timer of device 0000:00:1d.1 to 64 <6>uhci_hcd 0000:00:1d.1: UHCI Host Controller <6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 <6>uhci_hcd 0000:00:1d.1: irq 201, io base 0x00001840 <6>usb usb2: new device found, idVendor=0000, idProduct=0000 <6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb2: Product: UHCI Host Controller <6>usb usb2: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd <6>usb usb2: SerialNumber: 0000:00:1d.1 <6>usb usb2: configuration #1 chosen from 1 choice <6>hub 2-0:1.0: USB hub found <6>hub 2-0:1.0: 2 ports detected <6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 177 <7>PCI: Setting latency timer of device 0000:00:1d.2 to 64 <6>uhci_hcd 0000:00:1d.2: UHCI Host Controller <6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 <6>uhci_hcd 0000:00:1d.2: irq 177, io base 0x00001860 <6>usb usb3: new device found, idVendor=0000, idProduct=0000 <6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb3: Product: UHCI Host Controller <6>usb usb3: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd <6>usb usb3: SerialNumber: 0000:00:1d.2 <6>usb usb3: configuration #1 chosen from 1 choice <6>hub 3-0:1.0: USB hub found <6>hub 3-0:1.0: 2 ports detected <6>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 193 <7>PCI: Setting latency timer of device 0000:00:1d.3 to 64 <6>uhci_hcd 0000:00:1d.3: UHCI Host Controller <6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 <6>uhci_hcd 0000:00:1d.3: irq 193, io base 0x00001880 <6>usb usb4: new device found, idVendor=0000, idProduct=0000 <6>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb4: Product: UHCI Host Controller <6>usb usb4: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd <6>usb usb4: SerialNumber: 0000:00:1d.3 <6>usb usb4: configuration #1 chosen from 1 choice <6>hub 4-0:1.0: USB hub found <6>hub 4-0:1.0: 2 ports detected <6>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 209 <7>PCI: Setting latency timer of device 0000:00:1d.7 to 64 <6>ehci_hcd 0000:00:1d.7: EHCI Host Controller <6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 <6>ehci_hcd 0000:00:1d.7: debug port 1 <7>PCI: cache line size of 128 is not supported by device 0000:00:1d.7 <6>ehci_hcd 0000:00:1d.7: irq 209, io mem 0xe8080000 <6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 <6>usb usb5: new device found, idVendor=0000, idProduct=0000 <6>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb5: Product: EHCI Host Controller <6>usb usb5: Manufacturer: Linux 2.6.18.2-34-default ehci_hcd <6>usb usb5: SerialNumber: 0000:00:1d.7 <6>usb usb5: configuration #1 chosen from 1 choice <6>hub 5-0:1.0: USB hub found <6>hub 5-0:1.0: 8 ports detected <6>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 185 <6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 <6>Intel(R) PRO/1000 Network Driver - version 7.1.9-k4-NAPI <6>Copyright (c) 1999-2006 Intel Corporation. <6>ACPI: PCI Interrupt 0000:03:0b.0[A] -> GSI 16 (level, low) -> IRQ 193 <6>e1000: 0000:03:0b.0: e1000_probe: (PCI:33MHz:32-bit) 00:0d:60:c1:e9:4d <6>usb 3-2: new full speed USB device using uhci_hcd and address 3 <6>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection <6>usb 3-2: new device found, idVendor=0451, idProduct=2046 <6>usb 3-2: new device strings: Mfr=0, Product=0, SerialNumber=0 <6>usb 3-2: configuration #1 chosen from 1 choice <6>hub 3-2:1.0: USB hub found <6>hub 3-2:1.0: 4 ports detected <6>Adding 2104472k swap on /dev/hda1. Priority:-1 extents:1 across:2104472k <6>usb 3-2.1: new low speed USB device using uhci_hcd and address 4 <6>usb 3-2.1: new device found, idVendor=0a81, idProduct=0205 <6>usb 3-2.1: new device strings: Mfr=1, Product=2, SerialNumber=0 <6>usb 3-2.1: Product: PS2 to USB Converter <6>usb 3-2.1: Manufacturer: CHESEN <6>usb 3-2.1: configuration #1 chosen from 1 choice <6>usb 3-2.3: new low speed USB device using uhci_hcd and address 5 <6>usb 3-2.3: new device found, idVendor=04b3, idProduct=310b <6>usb 3-2.3: new device strings: Mfr=0, Product=0, SerialNumber=0 <6>usb 3-2.3: configuration #1 chosen from 1 choice <6>usbcore: registered new driver hiddev <6>input: CHESEN PS2 to USB Converter as /class/input/input2 <6>input: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-2.1 <6>input: CHESEN PS2 to USB Converter as /class/input/input3 <6>input: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-2.1 <6>input: HID 04b3:310b as /class/input/input4 <6>input: USB HID v1.00 Mouse [HID 04b3:310b] on usb-0000:00:1d.2-2.3 <6>usbcore: registered new driver usbhid <6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver <6>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com <6>loop: loaded (max 8 devices) <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hda3, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>AppArmor: AppArmor initialized <5>audit(1177102967.488:2): AppArmor initialized <4> Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Fri Apr 20 21:02:34 2007 Trying manual resume from /dev/hda1 Creating device nodes with udev Loading ide-core Loading ide-disk Loading processor Loading thermal Loading piix Loading fan Loading edd Loading jbd Loading mbcache Loading ext3 Invoking userspace resume from /dev/hda1 resume: Could not stat configuration file resume: libgcrypt version: 1.2.3 resume: Could not read the image Invoking in-kernel resume from /dev/hda1 Waiting for device /dev/hda2 to appear: ok fsck 1.39 (29-May-2006) [/bin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/hda2 /dev/hda2: Superblock last write time is in the future. FIXED. /dev/hda2: clean, 129168/2626560 files, 880484/5242880 blocks fsck succeeded. Mounting root device read-write. Mounting root /dev/hda2 Boot logging started on /dev/tty1(/dev/console (deleted)) at Fri Apr 20 15:02:39 2007 <notice>boot.udev start Starting udevd done <notice>'boot.udev start' exits with status 0 <notice>boot.rootfsck start Activating swap-devices in /etc/fstab... done<notice>'boot.rootfsck start' exits with status 0 <notice>boot.loadmodules start Loading required kernel modules done<notice>'boot.loadmodules start' exits with status 0 <notice>boot.preload_early start done <notice>'boot.preload_early start' exits with status 0 <notice>boot.device-mapper start Activating device mapper... done <notice>'boot.device-mapper start' exits with status 0 <notice>boot.md start Starting MD Raid done <notice>'boot.md start' exits with status 0 <notice>boot.lvm start Waiting for udev to settle... Scanning for LVM volume groups... Reading all physical volumes. This may take a while... No volume groups found No volume groups found Activating LVM volume groups... No volume groups found done <notice>'boot.lvm start' exits with status 0 <notice>boot.localfs start Checking file systems... fsck 1.39 (29-May-2006) /dev/hda3: Superblock last write time is in the future. FIXED. /dev/hda3: clean, 653/16662528 files, 573004/33302745 blocks donedone Mounting local file systems... proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) debugfs on /sys/kernel/debug type debugfs (rw) udev on /dev type tmpfs (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/hda3 on /home type ext3 (rw,acl,user_xattr) done<notice>'boot.localfs start' exits with status 0 <notice>boot.apparmor start Loading AppArmor module done Mounting securityfs on /sys/kernel/security done Loading AppArmor profiles done <notice>'boot.apparmor start' exits with status 0 <notice>boot.cleanup start <notice>'boot.cleanup start' exits with status 0 <notice>boot.clock start Setting up the hardware clockdone <notice>'boot.clock start' exits with status 0 <notice>boot.cycle start <notice>'boot.cycle start' exits with status 6 <notice>boot.klog start Creating /var/log/boot.msg done<notice>killproc: kill(846,29) <notice>'boot.klog start' exits with status 0 <notice>boot.proc start <notice>'boot.proc start' exits with status 0 <notice>boot.scpm start <notice>'boot.scpm start' exits with status 0 <notice>boot.sysctl start Setting current sysctl status from /etc/sysctl.conf net.ipv4.icmp_echo_ignore_broadcasts = 1 net.ipv4.conf.all.rp_filter = 1 done <notice>'boot.sysctl start' exits with status 0 <notice>boot.udev_retry start <notice>'boot.udev_retry start' exits with status 0 <notice>boot.videobios start Patching video bios Intel 800/900 Series VBIOS Hack : version 0.5.2 Chipset: 865G BIOS: TYPE 1 Mode Table Offset: $C0000 + $269 Mode Table Entries: 27 Patch mode 3c to resolution 1600x1200 complete done <notice>'boot.videobios start' exits with status 0 <notice>boot.crypto start <notice>'boot.crypto start' exits with status 0 <notice>boot.ipconfig start Enabling syn flood protectiondone Disabling IP forwardingdone done <notice>'boot.ipconfig start' exits with status 0 <notice>boot.localnet start Setting up hostname 'linux-01ha'done Setting up loopback interface lo lo IP address: 127.0.0.1/8 done <notice>'boot.localnet start' exits with status 0 <notice>boot.preload start done <notice>'boot.preload start' exits with status 0 <notice>boot.swap start Activating remaining swap-devices in /etc/fstab... done<notice>'boot.swap start' exits with status 0 <notice>SuSEfirewall2_init start Starting Firewall Initialization (phase 1 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. done <notice>'SuSEfirewall2_init start' exits with status 0 <notice>boot.ldconfig start <notice>'boot.ldconfig start' exits with status 0 System Boot Control: The system has been set up Skipped features: boot.cycle System Boot Control: Running /etc/init.d/boot.local done<notice>killproc: kill(846,3) INIT: Entering runlevel: 5 Boot logging started on /dev/tty1(/dev/console) at Fri Apr 20 21:02:57 2007 Master Resource Control: previous runlevel: N, switching to runlevel: 5 <notice>startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --systemLoading AppArmor profiles - AppArmor already loaded with profiles.skipped done SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ] <notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/syslog-ng ] ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/klogd ] Starting syslog servicesdone <notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/acpid ] Initializing random number generatordone Starting irqbalance unused <notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/resmgrd ] Starting D-Bus daemondone acpid: loading ACPI modules ( ac battery button ) done acpid: will not skip unsupported modules acpid: loading ACPI laptop modules ( ) done Starting acpid done Starting resource managerdone <notice>startproc: execve (/usr/sbin/polkitd) [ /usr/sbin/polkitd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/polkitd ] Starting PolicyKit daemondone <notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/hald ] Loading keymap i386/qwerty/uk.map.gz doneLoading compose table winkeys shiftctrl latin1.adddone Start Unicode mode doneLoading console font lat9w-16.psfu -m trivial G0:loadable doneStarting HAL daemondone Loading CPUFreq modules (CPUFreq not supported) <notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ LANG=en_GB.UTF-8 PREVLEVEL=N LINES=60 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/bin/kde SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ] Starting service kdmdone Setting up network interfaces: lo lo IP address: 127.0.0.1/8 done eth0 device: Intel Corporation 82541EI Gigabit Ethernet Controller eth0 configuration: eth-id-00:0d:60:c1:e9:4d eth0 (DHCP) . . <notice>pidofproc: dhcpcd 3226 IP/Netmask: 192.168.1.101 / 255.255.255.0 done<notice>killproc: kill(2541,20) <notice>killproc: kill(2538,1) Setting up service network . . . . . . . . . . . . . . . .done <notice>killproc: kill(2541,18) <notice>killproc: kill(2541,12) <notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/portmap ] Starting RPC portmap daemondone Importing Net File System (NFS)unused <notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -n ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/auditd ] <notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ] Checking/updating CPU microcode done <notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] Starting nfsboot (sm-notify) done Starting cupsddone Starting Name Service Cache Daemondone <notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] Starting ZENworks Management Daemondone <notice>checkproc: /opt/kde3/bin/kdm 3284 Starting SSH daemondone Starting auditd done <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ] Starting powersaved: done Starting mail service (Postfix)done Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/cron ] done Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. done Master Resource Control: runlevel 5 has been reached Skipped services in runlevel 5: irq_balancer nfs <notice>killproc: kill(2443,3) =========== end boot.msg contents after reboot with NOAPIC =================== -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259721 ------- Comment #5 from heseltine@attglobal.net 2007-04-20 21:30 MST ------- Hello for the 4th time. I ought to add that when I initially reinstalled SuSE and its updates as recommended, the system did not simply close down as usual. Instead, it showed a terminal screen ending with a Logon line. I added my login name and password and was able to continue the installation process at the SAX point. I don't know if this is important, but it was an odd continuation of a re-installation. Many thanks, Mark Heseltine -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=259721
User gregkh@novell.com added comment
https://bugzilla.novell.com/show_bug.cgi?id=259721#c6
Greg Kroah-Hartman
https://bugzilla.novell.com/show_bug.cgi?id=259721
User heseltine@attglobal.net added comment
https://bugzilla.novell.com/show_bug.cgi?id=259721#c7
--- Comment #7 from Mark Heseltine
https://bugzilla.novell.com/show_bug.cgi?id=259721
User cthiel@novell.com added comment
https://bugzilla.novell.com/show_bug.cgi?id=259721#c8
Christoph Thiel
https://bugzilla.novell.com/show_bug.cgi?id=259721
User cthiel@novell.com added comment
https://bugzilla.novell.com/show_bug.cgi?id=259721#c9
Christoph Thiel
Anyway, the issue is resolved, it would appear, in version 10.3. I have been running this version since at least February on a new hard drive but otherwise on the same system with the same programmes running. I have left the machine on for weeks and I have also simply turned it off over some nights and restarted in the morning. I have had no problems with v. 10.3 freezing. The only difference in the running of my computer since installing v. 10.3 is that I no longer add any parameters to the boot up sequence, which were required under 10.2 to prevent freezing.
-- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
participants (1)
-
bugzilla_noreply＠novell.com