https://bugzilla.novell.com/show_bug.cgi?id=634838 https://bugzilla.novell.com/show_bug.cgi?id=634838#c0 Summary: AMD 850 SATA fakeRAID and VIA VT6330 PATA controllers is unsupported. Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Critical Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers@forge.provo.novell.com ReportedBy: public.sma@inbox.ru QAContact: qa@suse.de Found By: --- Blocker: --- User-Agent: Opera/9.80 (S60; SymbOS; Opera Mobi/499; U; ru) Presto/2.4.18 Version/10.00 I start installation of openSUSE on computer. System configuration: 1. Motherboard Biostar TA890FXE Ver. 5.x (Chipset AMD 890FX / SB850 + VIA VT6330) 2. CPU AMD Athlon II 245 3. RAM OCZ DDR3 Platinum 1800 4. SATA DVD-RW Optiarc 5. 3 x SATA HDD WD5002ABYS (for fakeRAID) 6. PATA HDD Hitachi DeskStar HDS724040KLAT80 (with data from old dameged computer. Need to be copied to RAID) 7. VGA ATI FirePRO V3700 I prepare 2 LD on SATA HDDs using BIOS of mainboard: 1. 64 GB in RAID0 for System -- 512 MB for /boot partition, 1 GB for MS-DOS/Windows 98 SE, 16 GB for Linux Swap and all other space for root filesystem. 2. All other space for RAID5. RAID 5 used for /home partition. I boot from installation DVD and load kernel with pameter "dmraid=true". All HDD has been detected and udev starting loading drivers. udev detect 2 controllers: 1. ATI SB700/SB800 IDE Controller. Drivers: pata_atiixp*, pata_acpi, ata_generic*, ide_pci_generic*. 2. VIA PATA IDE Host Controller. Drivers: pata_via*, pata_acpi, ata_generic*, ide_pci_generic*. When YaST loaded I don't see my RAID and PATA devices. Only 3 SATA HDDs. I switch to console and launch "dmraid -ay --debug -v". Dmraid output: DEBUG: _find_set: searching pdc_bafgegbbi DEBUG: _find_set: not found pdc_bafgegbbi DEBUG: _find_set: searching pdc_bafgegbbi DEBUG: _find_set: not found pdc_bafgegbbi ERROR: pdc: RAID type 4 not supported ERROR: adding /dev/sdc to RAID set "pdc_bafgegbbi" DEBUG: _find_set: searching pdc_bafgegbbi DEBUG: _find_set: not found pdc_bafgegbbi ERROR: removing RAID set "pdc_bafgegbbi" DEBUG: freeing devices of RAID set "pdc_bafgegbbi" DEBUG: freeing device "pdc_bafgegbbi", path "/dev/sdc" DEBUG: _find_set: searching pdc_bafgegbbi DEBUG: _find_set: not found pdc_bafgegbbi DEBUG: _find_set: searching pdc_bafgegbbi DEBUG: _find_set: not found pdc_bafgegbbi ERROR: pdc: RAID type 4 not supported ERROR: adding /dev/sda to RAID set "pdc_bafgegbbi" DEBUG: _find_set: searching pdc_bafgegbbi DEBUG: _find_set: not found pdc_bafgegbbi ERROR: removing RAID set "pdc_bafgegbbi" DEBUG: freeing devices of RAID set "pdc_bafgegbbi" DEBUG: freeing device "pdc_bafgegbbi", path "/dev/sda" DEBUG: _find_set: searching pdc_bafgegbbi DEBUG: _find_set: not found pdc_bafgegbbi DEBUG: _find_set: searching pdc_bafgegbbi DEBUG: _find_set: not found pdc_bafgegbbi ERROR: pdc: RAID type 4 not supported ERROR: adding /dev/sdb to RAID set "pdc_bafgegbbi" DEBUG: _find_set: searching pdc_bafgegbbi DEBUG: _find_set: not found pdc_bafgegbbi ERROR: removing RAID set "pdc_bafgegbbi" DEBUG: freeing devices of RAID set "pdc_bafgegbbi" DEBUG: freeing device "pdc_bafgegbbi", path "/dev/sdb" ERROR: no RAID set found. No RAID sets. On RAID0 LD I have installed MS Windows 98. Under Windows RAID works fully properly WITHOUT ANY DRIVERS! P.S. I am very bad speak english. From Russia with love! Reproducible: Always Steps to Reproduce: 1. Connect few SATA and PATA HDDs to motherboard with AMD 890FX chipset. I use Biostar TA890FXE. 2. Setup fakeRAID. Use for setup system BIOS. 3. Try to install openSUSE on RAID. 4. If installation complete, try to copy data from PATA to RAID. Actual Results: I see 3 standalone SATA drives. RAID and PATA not usable. Expected Results: Complete installation and full access to HDDs. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.