[Bug 216451] New: "Aborted installation" when canceling aspect ratio configuration
https://bugzilla.novell.com/show_bug.cgi?id=216451 Summary: "Aborted installation" when canceling aspect ratio configuration Product: openSUSE 10.2 Version: Beta 1 Platform: 64bit OS/Version: Linux Status: NEW Severity: Major Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: hugo.costelha@gmail.com QAContact: jsrain@novell.com I started beta1 install and, after all the packages were installed, and then I reached the part where if checks for the Graphics Card and Monitor. Since it said "aspect ratio unconfigured", I clicked on it. But the I changed my mind and I clicked "Cancel" on the dialogue box that poped up. It immediately terminated the graphical mode, did some things and immediately started KDE. The next time I started the installed beta1 system, it said that installation failed, and asked me if I wanted to continue or restart the installation. I selected to continue and beta1 seemed to be working fine. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=216451 ------- Comment #1 from hugo.costelha@gmail.com 2006-10-30 16:03 MST ------- Created an attachment (id=103110) --> (https://bugzilla.novell.com/attachment.cgi?id=103110&action=view) Installation YaST logs The needed installation YaST logs. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=216451 cthiel@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|bnc-team- |yast2-maintainers@suse.de |screening@forge.provo.novell| |.com | -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=216451 sh@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|yast2-maintainers@suse.de |ms@novell.com Severity|Major |Normal -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=216451 ------- Comment #2 from hugo.costelha@gmail.com 2006-11-06 05:27 MST ------- I selected Major, because due to this bug, I didn't sound, printers, well, I didn't any of the hardware that should be configured in the last part of the installation. It also lead to errors about installation after the system "finished the install". I though that this problems were enough for Major. So I guess Major means blocking the installation, preventing nay use of the computer. I will remember that. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=216451 ms@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |bluedzins@wp.pl ------- Comment #3 from ms@novell.com 2006-11-06 05:52 MST ------- *** Bug 217368 has been marked as a duplicate of this bug. *** -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=216451 ms@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |hugo.costelha@gmail.com ------- Comment #4 from ms@novell.com 2006-11-06 05:54 MST ------- I'm sorry but I cannot reproduce this. I did the following maybe you can repeat the following steps on your machine as user root: PATH=$PATH:/usr/lib/YaST2/bin cd /usr/share/YaST2/clients y2base test_proposal '("hardware")' qt -geometry 800x600 I selected the aspect setup and canceled it... nothing serious happens -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=216451 ------- Comment #5 from hugo.costelha@gmail.com 2006-11-10 15:35 MST ------- With beta2 it got worst. Know I cannot even configure the monitor. If I try to vonfigure the monitor in the last stage of the installation, after having selected the monitor, I select "Test configuration", then I accept the configuration, and the YAST craches and skips the hardware configuration. Next boot starts last instalation phase again. So I still wasn't able to test what you sai in your last comment, since I still wasn't able to complete the openSUSE 10.2 beta2 installation properly. I will change the monitor without testing to see If I can complete the install. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=216451 hugo.costelha@gmail.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|hugo.costelha@gmail.com | ------- Comment #6 from hugo.costelha@gmail.com 2006-11-10 15:54 MST ------- Ok, I skipped the test part and was able to complete the install part (by the way, selecting OK on the aspect ratio causes no problem, only cancel). Also remember that I have "Aspect Unconfigured" when the dialog appears. Running what you told me crashes YaST with the following output: Uncaught exception from user code: TypeError in method 'SaXManipulateDesktop_setDisplayRatioAndTraversal', argument 2 of type 'double' at /usr/share/YaST2/modules/XLib.pm line 195 XLib::setDisplaySize('XLib', 'ARRAY(0x14e4be0)') called at -e line 0 Can't undef active subroutine during global destruction. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=216451 ms@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |RESOLVED Resolution| |WORKSFORME ------- Comment #7 from ms@novell.com 2006-11-13 03:40 MST ------- I'm sorry but I cannot reproduce your problem. It works as it should on the current beta version tested on: cat /etc/SuSE-release openSUSE 10.2 (i586) Beta2 VERSION = 10.2 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=216451 ------- Comment #8 from bluedzins@wp.pl 2006-11-13 06:34 MST ------- I don't know why I was linked to this report as a duplicate, but Marcus, could you take a look: https://bugzilla.novell.com/show_bug.cgi?id=217368 It is not about error messages -- there, simply yast "accepts" cancel. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=216451 ------- Comment #9 from jim.pye@pyenet.co.nz 2006-11-13 15:47 MST ------- Guys My 00.02 on this. Beta2 fresh installation on a Thinkpad R40. At the final Hardware screen I usually click on the check configuration for the detected video and resolution, just to make sure. When I said the config was OK it suddenly started to do the last bit of startup and next thing I was at the KDE login screen. It seemed to miss the final done button. Anyways after logging in I went to configure something that required the audio components and they were not configured. I started YaST and chose the Quick method to configure the sound card (the hardware had been detected OK) and it started to work. I think there might be something a bit broken with the final screen of the installation and the Sax control panel... Cheers Jim -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=216451 mrmazda@ij.net changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |mrmazda@ij.net ------- Comment #10 from mrmazda@ij.net 2006-11-13 16:21 MST ------- Looks to me like the problem is screen configuration doesn't know how to exit properly. I tested my configuration after doing everything else in final configuration. Test never returned me to where I could click on finish, but instead sent me directly to KDM. Then on next boot, YAST2 started itself up again claiming the installation had been aborted. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=216451 ------- Comment #11 from hugo.costelha@gmail.com 2006-11-14 01:26 MST ------- I thought it could be something related to the xorg open-source NVIDIA driver, but all the issues still happend even after having the NVIDIA binary only driver. Trying the test written on Comment #4 crashes when cancelling the aspect ration, crashes when canceling the "Test Configuration", and crashes when accepting ("save") on "Test configuration". This is very annoying, and from other people comments it seems to be a real bug that affects not just me. So shouldn't the bug be reopened, even if it works for you, Marcus? At least people would know that it is really a bug but that it is not being worked on. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=216451 ms@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|RESOLVED |REOPENED Resolution|WORKSFORME | ------- Comment #12 from ms@novell.com 2006-11-14 02:15 MST ------- yes I think you are right. I tested what you mentioned and all this works as expected if tested remotely but I was able to reproduce a crash when I manually called /usr/lib/YaST2/startup/YaST2.Second-Stage if another X-Server is running ( I have a Matrox card and clicked on test ) the fbdev server crashed if you save the configuration. The X log file from the fbdev server said: Backtrace: 0: Xorg(xf86SigHandler+0x81) [0x80c00b1] 1: [0xb7f7a420] 2: /usr/lib/xorg/modules/input//mouse_drv.so [0xb7c23072] 3: Xorg [0x80c022a] 4: Xorg [0x80aa441] 5: [0xb7f7a420] 6: Xorg(xf86UnblockSIGIO+0x57) [0x80a9e57] 7: Xorg [0x80b49dd] 8: Xorg(xf86EnterServerState+0x1f) [0x80b4a0f] 9: Xorg(xf86Wakeup+0x3de) [0x80c17ee] 10: Xorg(WakeupHandler+0x59) [0x808a279] 11: Xorg(WaitForSomething+0x1b9) [0x819aa29] 12: Xorg(Dispatch+0x82) [0x80861c2] 13: Xorg(main+0x495) [0x806e705] 14: /lib/libc.so.6(__libc_start_main+0xdc) [0xb7d0ef9c] 15: Xorg(FontFileCompleteXLFD+0x1e1) [0x806da21] Fatal server error: Caught signal 11. Server aborting I will attach the complete log -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=216451 ------- Comment #13 from ms@novell.com 2006-11-14 02:16 MST ------- Created an attachment (id=105068) --> (https://bugzilla.novell.com/attachment.cgi?id=105068&action=view) Xorg.0.log -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=216451 ms@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |ms@novell.com AssignedTo|ms@novell.com |sndirsch@novell.com Status|REOPENED |NEW Summary|"Aborted installation" when |installation fbdev server crashed while saving |canceling aspect ratio |configuration |configuration | -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=216451 sndirsch@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution| |DUPLICATE ------- Comment #14 from sndirsch@novell.com 2006-11-14 02:22 MST ------- *** This bug has been marked as a duplicate of bug 219946 *** -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
participants (1)
-
bugzilla_noreply＠novell.com