[Bug 210512] New: x40 does not boot with docking station using libata
https://bugzilla.novell.com/show_bug.cgi?id=210512 Summary: x40 does not boot with docking station using libata Product: openSUSE 10.2 Version: Alpha 5 Platform: Other OS/Version: Other Status: NEW Severity: Critical Priority: P5 - None Component: Basesystem AssignedTo: hare@novell.com ReportedBy: aj@novell.com QAContact: qa@suse.de my x40 does not boot with the docking station connected, it gets a libata error and then runs in a timeout. Without the docking station connected, the system boots up fine. I'll write up the messages later and will set this report to NEEDINFO to remind me - I first need to finish using the machine without docking station. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=210512 aj@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |aj@novell.com ------- Comment #1 from aj@novell.com 2006-10-06 04:49 MST ------- waiting for exact messages -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=210512 aj@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|aj@novell.com | ------- Comment #2 from aj@novell.com 2006-10-06 05:11 MST ------- I should have waited longer: <7>libata version 2.00 loaded. <7>ata_piix 0000:00:1f.1: version 2.00ac6 <4>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) <6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185 <7>PCI: Setting latency timer of device 0000:00:1f.1 to 64 <6>ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0x1810 irq 14 <6>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 <6>scsi0 : ata_piix <6>Time: acpi_pm clocksource has been installed. <6>IBM TrackPoint firmware: 0x0e, buttons: 3/3 <6>input: TPPS/2 IBM TrackPoint as /class/input/input2 <6>input: AT Translated Set 2 keyboard as /class/input/input3 <6>ata1.00: ATA-5, max UDMA/100, 78140160 sectors: LBA <6>ata1.00: ata1: dev 0 multi count 16 <6>ata1.00: configured for UDMA/100 <6>scsi1 : ata_piix <6>ata2.00: ATAPI, max UDMA/33 <4>ata2.01: qc timeout (cmd 0xa1) <4>ata2.01: failed to IDENTIFY (I/O error, err_mask=0x4) <4>ata2: failed to recover some devices, retrying in 5 secs <4>ata2.01: qc timeout (cmd 0xa1) <4>ata2.01: failed to IDENTIFY (I/O error, err_mask=0x4) <4>ata2: failed to recover some devices, retrying in 5 secs <4>ata2.01: qc timeout (cmd 0xa1) <4>ata2.01: failed to IDENTIFY (I/O error, err_mask=0x4) <4>ata2: failed to recover some devices, retrying in 5 secs <6>ata2.00: configured for UDMA/33 <5> Vendor: ATA Model: HITACHI_DK13FA-4 Rev: 00MC <5> Type: Direct-Access ANSI SCSI revision: 05 <5>SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) <5>sda: Write Protect is off <7>sda: Mode Sense: 00 3a 00 00 <5>SCSI device sda: drive cache: write back <5>SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) <5>sda: Write Protect is off <7>sda: Mode Sense: 00 3a 00 00 <5>SCSI device sda: drive cache: write back <6> sda: sda1 < sda5 sda6 sda7 > sda2 <5>sd 0:0:0:0: Attached scsi disk sda <5> Vendor: MATSHITA Model: UJDA755yDVD/CDRW Rev: 1.72 <5> Type: CD-ROM ANSI SCSI revision: 05 <5>sd 0:0:0:0: Attached scsi generic sg0 type 0 <5>scsi 1:0:0:0: Attached scsi generic sg1 type 5 <6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found <4>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray <6>Uniform CD-ROM driver Revision: 3.20 <7>sr 1:0:0:0: Attached scsi CD-ROM sr0 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=210512 hare@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |RESOLVED Resolution| |FIXED ------- Comment #3 from hare@novell.com 2006-10-27 02:25 MST ------- I've updated the libata stack to 2.6.19-rc2-mm2. It contains now an improved device detection for ata_piix, so this should be fixed. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
participants (1)
-
bugzilla_noreply＠novell.com