[Bug 232763] New: Cannot partition HostRAID drive in opensuse 10.2 yast when RAID volume name ends with [0-9]
https://bugzilla.novell.com/show_bug.cgi?id=232763 Summary: Cannot partition HostRAID drive in opensuse 10.2 yast when RAID volume name ends with [0-9] Product: openSUSE 10.2 Version: Final Platform: x86-64 OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: djwong@us.ibm.com QAContact: jsrain@novell.com I have an IBM x346 with the Adaptec 7902B U320 SCSI controller and HostRAID in the SCSI BIOS. The system has two 36GB SCSI disks which I am configuring as a RAID0. I am attempting to install OpenSUSE 10.2 onto the RAID0. The installer correctly configures the RAID0 volume "ELM3A92" as /dev/mapper/asr_ELM3A92; however, yast2 does not supply a partitioning proposal. When I try to manually set up partitions, I click "Create" in the partitioner and then "OK" to accept all defaults (one big ext3 /, no label, etc). Unfortunately, the dialog box goes away... but the partitions do not show up in the partition list! If I try these same steps but with the RAID volume named "RAID" (or anything that does not end in [0-9]), I can create partitions without problems. The installer also supplies a partitioning proposal when this is the case. The Adaptec BIOS allows users to supply arbitrary ASCII strings for volume names, so it's quite easy to hit this bug. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=232763 chrubis@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|bnc-team- |fehr@novell.com |screening@forge.provo.novell| |.com | -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=232763 fehr@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |ASSIGNED ------- Comment #1 from fehr@novell.com 2007-01-09 08:49 MST ------- Yes, there is a known problem with volume names ending in digits. See also bug #230701 Could you please attach y2log files after you unsuccesfully tried to create partitions on a raid ending on a digit. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=232763 ------- Comment #2 from djwong@us.ibm.com 2007-01-09 10:43 MST ------- Created an attachment (id=112061) --> (https://bugzilla.novell.com/attachment.cgi?id=112061&action=view) annotated y2log with my actions interspersed Can post the full log if you'd like, but here's what goes on during the partitioner. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=232763 fehr@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO Info Provider| |djwong@us.ibm.com ------- Comment #3 from fehr@novell.com 2007-01-10 04:52 MST ------- I created a fixed package yast2-storage which should also work also with RAID names ending in digits and attached it. If you are able to reproduce this in an installed system you can unpack the attachment and do a "rpm -Fhv yast2-storage*.rpm". Unfortunately so far I could not find a machine with a raid controller allowing arbitrary raid names to be specified by the user. Therefore I would be thankful if you could test if these packages fix the problem. If the problem is not fixed please attach y2log files again. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=232763 ------- Comment #4 from fehr@novell.com 2007-01-10 04:53 MST ------- Created an attachment (id=112185) --> (https://bugzilla.novell.com/attachment.cgi?id=112185&action=view) update yast2-storage packages -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=232763 ------- Comment #5 from djwong@us.ibm.com 2007-01-10 16:07 MST ------- Um... where can I get x86-64 rpms? The installed system is x86-64 and I'd rather not introduce variability... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=232763 ------- Comment #6 from fehr@novell.com 2007-01-10 16:38 MST ------- Will attach them tomorrow... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=232763 ------- Comment #7 from fehr@novell.com 2007-01-11 04:24 MST ------- Created an attachment (id=112429) --> (https://bugzilla.novell.com/attachment.cgi?id=112429&action=view) RPMs with updated yast2-storage for x86_64 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=232763 djwong@us.ibm.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |RESOLVED Info Provider|djwong@us.ibm.com | Resolution| |FIXED ------- Comment #8 from djwong@us.ibm.com 2007-01-11 16:07 MST ------- The RPMs fix this issue. Thank you! -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=232763 ------- Comment #9 from fehr@novell.com 2007-01-11 16:09 MST ------- Thanks for testing... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
participants (1)
-
bugzilla_noreply＠novell.com