https://bugzilla.novell.com/show_bug.cgi?id=300118#c2
Dominik Zajac changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEEDINFO |NEW
Info Provider|dominik.zajac@baycix.de |
--- Comment #2 from Dominik Zajac 2007-08-16 00:52:17 MST ---
It seems that the xen hypervisor is using the same wrong memory size like grub.
We tested the system with xen-enterprise too and there was the right memory
size detected.
XEN dmsg:
__ __ _____ ___ _____ _ _ _____ _____ _ _ ____ ___
\ \/ /___ _ __ |___ / / _ \ |___ / / / |___ |___ | || | |___ \ / _ \
\ // _ \ '_ \ |_ \| | | | |_ \ | | | / / / /| || |_ __ __) | | | |
/ \ __/ | | | ___) | |_| | ___) | | | | / / / / |__ _|__/ __/| |_| |
/_/\_\___|_| |_| |____(_)___(_)____/___|_|_|/_/ /_/ |_| |_____|\___/
|_____|
http://www.cl.cam.ac.uk/netos/xen
University of Cambridge Computer Laboratory
Xen version 3.0.3_11774-20 (abuild@suse.de) (gcc version 4.1.2 20061115
(prerelease) (SUSE Linux)) Tue Nov 28 09:26:30 UTC 2006
Latest ChangeSet: 11774
(XEN) Command line: /boot/xen-pae.gz
(XEN) Physical RAM map:
(XEN) 0000000000000000 - 000000000009fc00 (usable)
(XEN) 0000000000100000 - 00000000d7fd0000 (usable)
(XEN) System RAM: 3455MB (3538364kB)
(XEN) Xen heap: 10MB (10320kB)
(XEN) PAE enabled, limit: 16 GB
(XEN) found SMP MP-table at 000ff780
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: RSDP (v002 ACPIAM ) @ 0x000fa3a0
(XEN) ACPI: XSDT (v001 A M I OEMXSDT 0x06000708 MSFT 0x00000097) @ 0xd7fd0100
(XEN) ACPI: FADT (v003 A M I OEMFACP 0x06000708 MSFT 0x00000097) @ 0xd7fd0290
(XEN) ACPI: MADT (v001 A M I OEMAPIC 0x06000708 MSFT 0x00000097) @ 0xd7fd0390
(XEN) ACPI: MCFG (v001 A M I OEMMCFG 0x06000708 MSFT 0x00000097) @ 0xd7fd0430
(XEN) ACPI: OEMB (v001 A M I AMI_OEM 0x06000708 MSFT 0x00000097) @ 0xd7fde040
(XEN) ACPI: SRAT (v001 AMD HAMMER 0x00000001 AMD 0x00000001) @ 0xd7fd4ec0
(XEN) ACPI: HPET (v001 A M I OEMHPET0 0x06000708 MSFT 0x00000097) @ 0xd7fd4fd0
(XEN) ACPI: SSDT (v001 A M I POWERNOW 0x00000001 AMD 0x00000001) @ 0xd7fd5010
(XEN) ACPI: DSDT (v001 0AAAA 0AAAA000 0x00000000 INTL 0x20051117) @ 0x00000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 15:1 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 15:1 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
(XEN) Processor #2 15:1 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
(XEN) Processor #3 15:1 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
(XEN) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) ACPI: IRQ14 used by override.
(XEN) ACPI: IRQ15 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x10de8201 base: 0xfed00000
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2400.145 MHz processor.
(XEN) CPU0: AMD Flush Filter disabled
(XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
(XEN) CPU: L2 Cache: 1024K (64 bytes/line)
(XEN) CPU 0(2) -> Core 0
(XEN) AMD SVM Extension is enabled for cpu 0.
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: AMD Dual-Core AMD Opteron(tm) Processor 2216 stepping 02
(XEN) Booting processor 1/1 eip 90000
(XEN) Initializing CPU#1
(XEN) CPU1: AMD Flush Filter disabled
(XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
(XEN) CPU: L2 Cache: 1024K (64 bytes/line)
(XEN) CPU 1(2) -> Core 1
(XEN) AMD: Disabling C1 Clock Ramping Node #0
(XEN) AMD: Disabling C1 Clock Ramping Node #1
(XEN) AMD SVM Extension is enabled for cpu 1.
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) CPU1: AMD Dual-Core AMD Opteron(tm) Processor 2216 stepping 02
(XEN) Booting processor 2/2 eip 90000
(XEN) Initializing CPU#2
(XEN) CPU2: AMD Flush Filter disabled
(XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
(XEN) CPU: L2 Cache: 1024K (64 bytes/line)
(XEN) CPU 2(2) -> Core 0
(XEN) AMD SVM Extension is enabled for cpu 2.
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#2.
(XEN) CPU2: AMD Dual-Core AMD Opteron(tm) Processor 2216 stepping 02
(XEN) Booting processor 3/3 eip 90000
(XEN) Initializing CPU#3
(XEN) CPU3: AMD Flush Filter disabled
(XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
(XEN) CPU: L2 Cache: 1024K (64 bytes/line)
(XEN) CPU 3(2) -> Core 1
(XEN) AMD SVM Extension is enabled for cpu 3.
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#3.
(XEN) CPU3: AMD Dual-Core AMD Opteron(tm) Processor 2216 stepping 02
(XEN) Total of 4 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using old ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 4 CPUs:
(XEN) CPU#0 had 1783326 usecs TSC skew, fixed it up.
(XEN) CPU#1 had 0 usecs TSC skew, fixed it up.
(XEN) CPU#2 had -1789569 usecs TSC skew, fixed it up.
(XEN) CPU#3 had -1789569 usecs TSC skew, fixed it up.
(XEN) Platform timer is 25.000MHz HPET
(XEN) Brought up 4 CPUs
(XEN) Machine check exception polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Domain 0 kernel supports features = { 0000001f }.
(XEN) Domain 0 kernel requires features = { 00000000 }.
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000003000000->0000000004000000 (838543 pages to be
allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c0100000->c046bab4
(XEN) Init. ramdisk: c046c000->c0baba00
(XEN) Phys-Mach map: c0bac000->c0ee2e3c
(XEN) Start info: c0ee3000->c0ee346c
(XEN) Page tables: c0ee4000->c0ef1000
(XEN) Boot stack: c0ef1000->c0ef2000
(XEN) TOTAL: c0000000->c1000000
(XEN) ENTRY ADDRESS: c0100000
(XEN) Dom0 has maximum 4 VCPUs
(XEN) Initrd len 0x73fa00, start at 0xc046c000
(XEN) Scrubbing Free RAM: ...................................done.
(XEN) Xen trace buffers: disabled
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to
Xen).
NoXEN dmesg:
Linux version 2.6.18.8-0.5-bigsmp (geeko@buildhost) (gcc version 4.1.2 20061115
(prerelease) (SUSE Linux)) #1 SMP Fri Jun 22 12:17:53 UTC 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000d7fd0000 (usable)
BIOS-e820: 00000000d7fd0000 - 00000000d7fde000 (ACPI data)
BIOS-e820: 00000000d7fde000 - 00000000d8000000 (ACPI NVS)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 0000000100000000 - 0000000228000000 (usable)
7936MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
NX (Execute Disable) protection: active
On node 0 totalpages: 2260992
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 2031616 pages, LIFO batch:31
DMI present.
Using APIC driver default
ACPI: RSDP (v002 ACPIAM ) @ 0x000fa3a0
ACPI: XSDT (v001 A M I OEMXSDT 0x06000708 MSFT 0x00000097) @ 0xd7fd0100
ACPI: FADT (v003 A M I OEMFACP 0x06000708 MSFT 0x00000097) @ 0xd7fd0290
ACPI: MADT (v001 A M I OEMAPIC 0x06000708 MSFT 0x00000097) @ 0xd7fd0390
ACPI: MCFG (v001 A M I OEMMCFG 0x06000708 MSFT 0x00000097) @ 0xd7fd0430
ACPI: OEMB (v001 A M I AMI_OEM 0x06000708 MSFT 0x00000097) @ 0xd7fde040
ACPI: SRAT (v001 AMD HAMMER 0x00000001 AMD 0x00000001) @ 0xd7fd4ec0
ACPI: HPET (v001 A M I OEMHPET0 0x06000708 MSFT 0x00000097) @ 0xd7fd4fd0
ACPI: SSDT (v001 A M I POWERNOW 0x00000001 AMD 0x00000001) @ 0xd7fd5010
ACPI: DSDT (v001 0AAAA 0AAAA000 0x00000000 INTL 0x20051117) @ 0x00000000
ACPI: PM-Timer IO Port: 0x2008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Processor #2 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
Processor #3 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10de8201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at f1000000 (gap: f0000000:0ec00000)
Detected 2400.264 MHz processor.
Built 1 zonelists. Total pages: 2260992
Kernel command line: root=/dev/sda1 resume=/dev/sda2 splash=silent
bootsplash: silent mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 8308804k/9043968k available (1703k kernel code, 78280k reserved, 1103k
data, 200k init, 7470912k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
Using HPET for base-timer
Calibrating delay using timer specific routine.. 4803.83 BogoMIPS (lpj=9607676)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001
00000000 0000001f
CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001
00000000 0000001f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0(2) -> Core 0
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001
00000000 0000001f
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
checking if image is initramfs... it is
Freeing initrd memory: 3139k freed
ACPI: Core revision 20060707
CPU0: AMD Dual-Core AMD Opteron(tm) Processor 2216 stepping 02
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4800.28 BogoMIPS (lpj=9600569)
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001
00000000 0000001f
CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001
00000000 0000001f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1(2) -> Core 1
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001
00000000 0000001f
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: AMD Dual-Core AMD Opteron(tm) Processor 2216 stepping 02
SMP alternatives: switching to SMP code
Booting processor 2/2 eip 3000
Initializing CPU#2
Calibrating delay using timer specific routine.. 4800.29 BogoMIPS (lpj=9600581)
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001
00000000 0000001f
CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001
00000000 0000001f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 2(2) -> Core 0
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001
00000000 0000001f
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: AMD Dual-Core AMD Opteron(tm) Processor 2216 stepping 02
SMP alternatives: switching to SMP code
Booting processor 3/3 eip 3000
Initializing CPU#3
Calibrating delay using timer specific routine.. 4800.29 BogoMIPS (lpj=9600587)
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001
00000000 0000001f
CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001
00000000 0000001f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 3(2) -> Core 1
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001
00000000 0000001f
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: AMD Dual-Core AMD Opteron(tm) Processor 2216 stepping 02
Total of 4 processors activated (19204.70 BogoMIPS).
ENABLING IO-APIC IRQs
.TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 4 CPUs:
CPU#0 had 426 usecs TSC skew, fixed it up.
CPU#1 had 426 usecs TSC skew, fixed it up.
CPU#2 had -426 usecs TSC skew, fixed it up.
CPU#3 had -426 usecs TSC skew, fixed it up.
Brought up 4 CPUs
migration_cost=428
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
PCI: No mmconfig possible on 0:18
PCI: No mmconfig possible on 0:19
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:06.0
PCI: Transparent bridge - 0000:00:06.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *5
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *5
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 16 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:0a: ioport range 0xca0-0xcaf has been reserved
pnp: 00:0d: ioport range 0xa00-0xa7f has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:01:06.0
PCI: Bridge: 0000:00:06.0
IO window: c000-cfff
MEM window: fe900000-fe9fffff
PREFETCH window: f8000000-fbffffff
PCI: Bridge: 0000:00:0a.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:05:00.0
IO window: d000-dfff
MEM window: fea00000-feafffff
PREFETCH window: disabled.
PCI: Bridge: 0000:05:01.0
IO window: e000-efff
MEM window: feb00000-febfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:04:00.0
IO window: d000-efff
MEM window: fea00000-febfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0f.0
IO window: d000-efff
MEM window: fea00000-febfffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:00:0a.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0f.0 to 64
PCI: Setting latency timer of device 0000:04:00.0 to 64
PCI: Setting latency timer of device 0000:05:00.0 to 64
PCI: Setting latency timer of device 0000:05:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
audit(1187253074.972:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:0a.0 to 64
pcie_portdrv_probe->Dev[0376:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0a.0:pcie00]
Allocate Port Service[0000:00:0a.0:pcie01]
Allocate Port Service[0000:00:0a.0:pcie03]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
pcie_portdrv_probe->Dev[0378:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
Allocate Port Service[0000:00:0d.0:pcie01]
Allocate Port Service[0000:00:0d.0:pcie03]
PCI: Setting latency timer of device 0000:00:0f.0 to 64
pcie_portdrv_probe->Dev[0377:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0f.0:pcie00]
Allocate Port Service[0000:00:0f.0:pcie01]
Allocate Port Service[0000:00:0f.0:pcie03]
PCI: Setting latency timer of device 0000:04:00.0 to 64
pcie_portdrv_probe->Dev[8018:111d] has invalid IRQ. Check vendor BIOS
Allocate Port Service[0000:04:00.0:pcie10]
Allocate Port Service[0000:04:00.0:pcie13]
PCI: Setting latency timer of device 0000:05:00.0 to 64
pcie_portdrv_probe->Dev[8018:111d] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:05:00.0:pcie20]
Allocate Port Service[0000:05:00.0:pcie23]
PCI: Setting latency timer of device 0000:05:01.0 to 64
pcie_portdrv_probe->Dev[8018:111d] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:05:01.0:pcie20]
Allocate Port Service[0000:05:01.0:pcie23]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
input: AT Translated Set 2 keyboard as /class/input/input1
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 1
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 200k freed
Time: hpet clocksource has been installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI subsystem initialized
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not
present [20060707]
ACPI: Getting cpuindex for acpiid 0x5
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not
present [20060707]
ACPI: Getting cpuindex for acpiid 0x6
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not
present [20060707]
ACPI: Getting cpuindex for acpiid 0x7
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not
present [20060707]
ACPI: Getting cpuindex for acpiid 0x8
NFORCE-MCP55: IDE controller at PCI slot 0000:00:04.0
NFORCE-MCP55: chipset revision 161
NFORCE-MCP55: not 100% native mode: will probe irqs later
NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
input: PS/2 Generic Mouse as /class/input/input2
hda: TSSTcorpDVD-ROM SH-D162C, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
libata version 2.00 loaded.
sata_nv 0000:00:05.0: version 2.0
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LSA0] -> GSI 23 (level, low) ->
IRQ 217
PCI: Setting latency timer of device 0000:00:05.0 to 64
ata1: SATA max UDMA/133 cmd 0xB480 ctl 0xB402 bmdma 0xAC00 irq 217
ata2: SATA max UDMA/133 cmd 0xB080 ctl 0xB002 bmdma 0xAC08 irq 217
scsi0 : sata_nv
ata1: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0xB487
scsi1 : sata_nv
ata2: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0xB087
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [LSA1] -> GSI 22 (level, low) ->
IRQ 225
PCI: Setting latency timer of device 0000:00:05.1 to 64
ata3: SATA max UDMA/133 cmd 0xA880 ctl 0xA802 bmdma 0xA080 irq 225
ata4: SATA max UDMA/133 cmd 0xA480 ctl 0xA402 bmdma 0xA088 irq 225
scsi2 : sata_nv
ata3: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0xA887
scsi3 : sata_nv
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/1)
ata4.00: ata4: dev 0 multi count 16
ata4.00: configured for UDMA/133
Vendor: ATA Model: WDC WD3200YS-01P Rev: 21.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
sd 3:0:0:0: Attached scsi disk sda
ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [LSA2] -> GSI 21 (level, low) ->
IRQ 233
PCI: Setting latency timer of device 0000:00:05.2 to 64
ata5: SATA max UDMA/133 cmd 0xA000 ctl 0x9C02 bmdma 0x9480 irq 233
ata6: SATA max UDMA/133 cmd 0x9880 ctl 0x9802 bmdma 0x9488 irq 233
scsi4 : sata_nv
sd 3:0:0:0: Attached scsi generic sg0 type 0
ata5: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0xA007
scsi5 : sata_nv
ata6: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x9887
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 20 (level, low) ->
IRQ 50
PCI: Setting latency timer of device 0000:00:08.0 to 64
forcedeth: using HIGHDMA
usbcore: registered new driver usbfs
usbcore: registered new driver hub
hda: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
eth0: forcedeth.c: subsystem: 010de:cb84 bound to 0000:00:08.0
ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 23 (level, low) ->
IRQ 217
PCI: Setting latency timer of device 0000:00:09.0 to 64
forcedeth: using HIGHDMA
eth1: forcedeth.c: subsystem: 010de:cb84 bound to 0000:00:09.0
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x2d00
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2e00
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 22 (level, low) ->
IRQ 225
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 225, io mem 0xfe8fb000
eth1 renamed to eth11
eth0 renamed to eth8
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.18.8-0.5-bigsmp ohci_hcd
usb usb1: SerialNumber: 0000:00:02.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 21 (level, low) ->
IRQ 233
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 233, io mem 0xfe8fac00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.18.8-0.5-bigsmp ehci_hcd
usb usb2: SerialNumber: 0000:00:02.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
Adding 1004052k swap on /dev/sda2. Priority:-1 extents:1 across:1004052k
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
loop: loaded (max 200 devices)
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
powernow-k8: Found 4 Dual-Core AMD Opteron(tm) Processor 2216 processors
(version 2.00.00)
powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0xa
powernow-k8: 1 : fid 0xe (2200 MHz), vid 0xc
powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xe
powernow-k8: 3 : fid 0xa (1800 MHz), vid 0x10
powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12
powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x8
powernow-k8: 1 : fid 0xe (2200 MHz), vid 0xa
powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xc
powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xe
powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12
eth8: no link during initialization.
audit(1187253096.893:2): audit_pid=3468 old=0 by auid=4294967295
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth8: link is not ready
IPv6 over IPv4 tunneling driver
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.