https://bugzilla.novell.com/show_bug.cgi?id=714218 https://bugzilla.novell.com/show_bug.cgi?id=714218#c1 Sid Boyce changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |sboyce@blueyonder.co.uk --- Comment #1 from Sid Boyce 2011-08-26 20:39:06 UTC --- Changed /etc/fstab from proc /proc proc defaults 0 0 To proc /proc proc rw,nodev,auto 0 0 The /sbin/fsck.proc error has gone it just complains about fusectl # INITRD 3.1.0-rc3-git4-smp Kernel image: /boot/3.1.0-rc3-git4-smp Initrd image: /boot/initrd3.1.0-rc3-git4-smp /usr device: /dev/disk/by-id/ata-WDC_WD20EARS-07MVWB0_WD-WCAZA4270277-part2 (/dev/sda2) (mounted on /usr as ext4) Resume device: /dev/disk/by-id/ata-WDC_WD20EARS-07MVWB0_WD-WCAZA4270277-part3 (/dev/sda3) modprobe: Module fusectl not found. WARNING: no dependencies for kernel module 'fusectl' found. Kernel Modules: scsi_mod libata pata_atiixp ata_generic thermal_sys thermal processor fan crc16 jbd2 ext4 pata_sl82c105 sata_mv pata_ns87415 pata_rdc sata_sil24 sata_via libahci acard-ahci sata_sx4 pata_acpi pata_cs5530 pata_mpiix pata_piccolo sata_sil pata_atp867x pata_triflex sata_nv pata_pdc2027x pata_netcell pata_sis sata_sis pata_artop sata_uli pata_marvell sata_qstor pata_hpt3x2n pata_ninja32 ata_piix pata_sc1200 pata_serverworks pata_hpt3x3 pata_it821x sata_inic162x ahci pata_oldpiix pata_cmd640 pata_it8213 pata_amd sata_promise pata_ns87410 pdc_adma pata_cypress pata_pdc202xx_old sata_svw pata_sil680 pata_efar pata_cs5520 pata_via pata_hpt366 pata_optidma pata_jmicron pata_hpt37x pata_radisys pata_cmd64x pata_opti pata_ali pata_rz1000 sata_vsc pata_sch sd_mod mmc_core ssb ohci-hcd ehci-hcd uhci-hcd usbhid **************************** * WARNING * No fsck for your rootfs * could be found. * This might be bad! * Please install: /sbin/fsck.fusectl **************************** Features: block usb resume.userspace resume.kernel Bootsplash: openSUSE (1024x768) slipstream:/usr/src/linux-3.1-rc3-git4 # !v vi /etc/fstab slipstream:/usr/src/linux-3.1-rc3-git4 # INITRD 3.1.0-rc3-git4-smp Kernel image: /boot/3.1.0-rc3-git4-smp Initrd image: /boot/initrd3.1.0-rc3-git4-smp /usr device: /dev/disk/by-id/ata-WDC_WD20EARS-07MVWB0_WD-WCAZA4270277-part2 (/dev/sda2) (mounted on /usr as ext4) Resume device: /dev/disk/by-id/ata-WDC_WD20EARS-07MVWB0_WD-WCAZA4270277-part3 (/dev/sda3) modprobe: Module fusectl not found. WARNING: no dependencies for kernel module 'fusectl' found. Kernel Modules: scsi_mod libata pata_atiixp ata_generic thermal_sys thermal processor fan crc16 jbd2 ext4 pata_sl82c105 sata_mv pata_ns87415 pata_rdc sata_sil24 sata_via libahci acard-ahci sata_sx4 pata_acpi pata_cs5530 pata_mpiix pata_piccolo sata_sil pata_atp867x pata_triflex sata_nv pata_pdc2027x pata_netcell pata_sis sata_sis pata_artop sata_uli pata_marvell sata_qstor pata_hpt3x2n pata_ninja32 ata_piix pata_sc1200 pata_serverworks pata_hpt3x3 pata_it821x sata_inic162x ahci pata_oldpiix pata_cmd640 pata_it8213 pata_amd sata_promise pata_ns87410 pdc_adma pata_cypress pata_pdc202xx_old sata_svw pata_sil680 pata_efar pata_cs5520 pata_via pata_hpt366 pata_optidma pata_jmicron pata_hpt37x pata_radisys pata_cmd64x pata_opti pata_ali pata_rz1000 sata_vsc pata_sch sd_mod mmc_core ssb ohci-hcd ehci-hcd uhci-hcd usbhid **************************** * WARNING * No fsck for your rootfs * could be found. * This might be bad! * Please install: /sbin/fsck.fusectl **************************** Features: block usb resume.userspace resume.kernel Bootsplash: openSUSE (1024x768) slipstream:/usr/src/linux-3.1-rc3-git4 # # mount devtmpfs on /dev type devtmpfs (rw,relatime,size=4047372k,nr_inodes=1011843,mode=755) tmpfs on /dev/shm type tmpfs (rw,relatime) tmpfs on /run type tmpfs (rw,nosuid,nodev,relatime,mode=755) devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620,ptmxmode=000) /dev/sda2 on / type ext4 (rw,relatime,user_xattr,acl,barrier=1,data=ordered) proc on /proc type proc (rw,relatime) sysfs on /sys type sysfs (rw,relatime) debugfs on /sys/kernel/debug type debugfs (rw,relatime) securityfs on /sys/kernel/security type securityfs (rw,relatime) /dev/sda1 on /boot type ext4 (rw,relatime,user_xattr,acl,barrier=1,data=ordered) /dev/sdc1 on /home/lancelot/ftp type reiserfs (rw,relatime,acl,user_xattr) /dev/sdb2 on /2 type xfs (rw,relatime,attr2,delaylog,noquota) tmpfs on /var/lock type tmpfs (rw,nosuid,nodev,relatime,mode=755) tmpfs on /var/run type tmpfs (rw,nosuid,nodev,relatime,mode=755) proc on /var/lib/ntp/proc type proc (ro,nosuid,nodev,relatime) gvfs-fuse-daemon on /root/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,relatime,user_id=0,group_id=0) fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime) umounted fusectl and gvfs-fuse-daemon. It's somehow ignored the changed /etc/fstab and mounted proc and back comes the /sbin/fsck.proc error. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=714218 https://bugzilla.novell.com/show_bug.cgi?id=714218#c Sid Boyce changed: What |Removed |Added ---------------------------------------------------------------------------- Priority|P5 - None |P2 - High Target Milestone|--- |Milestone 3 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=714218 https://bugzilla.novell.com/show_bug.cgi?id=714218#c4 --- Comment #4 from Sid Boyce 2011-08-27 20:46:29 UTC --- In /lib/mkinitrd/setup/91-mount.sh I commented out the second line below and added the first line calling /sbin/ext4 rootfsck="/sbin/fsck.ext4" # rootfsck="/sbin/fsck.${rootfstype}" slipstream:/usr/src/linux-3.1-rc3-git6 # INITRD 3.1.0-rc3-git6-smp Scanning scripts ... Resolve dependencies ... Install symlinks in /lib/mkinitrd/setup ... Install symlinks in /lib/mkinitrd/boot ... Kernel image: /boot/3.1.0-rc3-git6-smp Initrd image: /boot/initrd3.1.0-rc3-git6-smp /usr device: /dev/disk/by-id/ata-WDC_WD20EARS-07MVWB0_WD-WCAZA4270277-part2 (/dev/sda2) (mounted on /usr as ext4) Resume device: /dev/disk/by-id/ata-WDC_WD20EARS-07MVWB0_WD-WCAZA4270277-part3 (/dev/sda3) Kernel Modules: scsi_mod libata pata_atiixp ata_generic thermal_sys thermal processor fan crc16 jbd2 ext4 pata_sl82c105 sata_mv pata_ns87415 pata_rdc sata_sil24 sata_via libahci acard-ahci sata_sx4 pata_acpi pata_cs5530 pata_mpiix pata_piccolo sata_sil pata_atp867x pata_triflex sata_nv pata_pdc2027x pata_netcell pata_sis sata_sis pata_artop sata_uli pata_marvell sata_qstor pata_hpt3x2n pata_ninja32 ata_piix pata_sc1200 pata_serverworks pata_hpt3x3 pata_it821x sata_inic162x ahci pata_oldpiix pata_cmd640 pata_it8213 pata_amd sata_promise pata_ns87410 pdc_adma pata_cypress pata_pdc202xx_old sata_svw pata_sil680 pata_efar pata_cs5520 pata_via pata_hpt366 pata_optidma pata_jmicron pata_hpt37x pata_radisys pata_cmd64x pata_opti pata_ali pata_rz1000 sata_vsc pata_sch sd_mod mmc_core ssb ohci-hcd ehci-hcd uhci-hcd usbhid Features: block usb resume.userspace resume.kernel Bootsplash: openSUSE (1024x768) slipstream:/usr/src/linux-3.1-rc3-git6 # -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=714218 https://bugzilla.novell.com/show_bug.cgi?id=714218#c6 Bruno Friedmann changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |bruno@ioda-net.ch --- Comment #6 from Bruno Friedmann 2011-08-28 16:12:46 UTC --- Same kind of trouble here (trying to rebuild the initrd for osc build client) "env" "rootfstype=ext4" "mkinitrd" "-d" "/dev/vgsys/lvobsbuild" "-m" "ext3 ext4 btrfs reiserfs binfmt_misc virtio_pci virtio_blk" "-k" "/boot/vmlinuz" "-i" "/boot/initrd-3.0.0-4-desktop-virtio" The first time I will to build the mkinird after upgrading to kernel 3.0.0-4 under factory I get this "env" "rootfstype=ext3" "mkinitrd" "-d" "/dev/null" "-m" "ext3 ext4 btrfs reiserfs binfmt_misc virtio_pci virtio_blk" "-k" "/boot/vmlinuz" "-i" "/boot/initrd-3.0.0-4-desktop-virtio" Kernel image: /boot/vmlinuz Initrd image: /boot/initrd-3.0.0-4-desktop-virtio KMS drivers: nvidia /usr device: /dev/mapper/vgsys-lvsuse (mounted on /usr as ext4) Resume device: /dev/vgsys/lvswap enabling LUKS support for /dev/md1 (cr_md1) modprobe: Module rpc_pipefs not found. WARNING: no dependencies for kernel module 'rpc_pipefs' found. modprobe: Module kernel not found. WARNING: no dependencies for kernel module 'kernel' found. Kernel Modules: zlib_deflate btrfs reiserfs binfmt_misc virtio virtio_pci virtio_ring virtio_blk dm-mod dm-crypt dm-snapshot nvidia raid0 raid1 raid10 async_tx async_memcpy xor async_xor raid6_pq async_pq async_raid6_recov raid456 linear arc4 sha256_generic cbc **************************** * WARNING * No fsck for your rootfs * could be found. * This might be bad! * Please install: /sbin/fsck.rpc_pipefs **************************** Features: dm kms block usb md lvm2 luks Bootsplash: hardDrive (1920x1080), hardDrive (800x600) Then I mount an nfs share, then the initrd can be created but not usable, as it try to use and nfs / in osc build --local-package I unmount the nfs, then the same command issue that : Kernel image: /boot/vmlinuz Initrd image: /boot/initrd-3.0.0-4-desktop-virtio /usr device: /dev/mapper/vgsys-lvsuse (mounted on /usr as ext4) Resume device: /dev/vgsys/lvswap enabling LUKS support for /dev/md1 (cr_md1) modprobe: Module debugfs not found. WARNING: no dependencies for kernel module 'debugfs' found. modprobe: Module kernel not found. WARNING: no dependencies for kernel module 'kernel' found. Kernel Modules: zlib_deflate btrfs reiserfs binfmt_misc virtio virtio_pci virtio_ring virtio_blk dm-mod dm-crypt dm-snapshot raid0 raid1 raid10 async_tx async_memcpy xor async_xor raid6_pq async_pq async_raid6_recov raid456 linear arc4 sha256_generic cbc **************************** * WARNING * No fsck for your rootfs * could be found. * This might be bad! * Please install: /sbin/fsck.debugfs **************************** Features: dm block usb md lvm2 luks Bootsplash: hardDrive (1920x1080), hardDrive (800x600) I'm running systemd + factory -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=714218 https://bugzilla.novell.com/show_bug.cgi?id=714218#c7 --- Comment #7 from Bruno Friedmann 2011-08-30 15:00:47 UTC --- Just to give more informations today, after a cold reboot if I try to get my new initrd for osc build !634 "env" "rootfstype=ext4" "mkinitrd" "-d" "/dev/null" "-m" "ext3 ext4 btrfs reiserfs binfmt_misc virtio_pci virtio_blk" "-k" "/boot/vmlinuz" "-i" "/boot/initrd-3.0.0-4-desktop-virtio" Kernel image: /boot/vmlinuz Initrd image: /boot/initrd-3.0.0-4-desktop-virtio /usr device: /dev/mapper/vgsys-lvsuse (mounted on /usr as ext4) Resume device: /dev/vgsys/lvswap enabling LUKS support for /dev/md1 (cr_md1) modprobe: Module rpc_pipefs not found. WARNING: no dependencies for kernel module 'rpc_pipefs' found. modprobe: Module kernel not found. WARNING: no dependencies for kernel module 'kernel' found. Kernel Modules: zlib_deflate btrfs reiserfs binfmt_misc virtio virtio_pci virtio_ring virtio_blk dm-mod dm-crypt dm-snapshot raid0 raid1 raid10 async_tx async_memcpy xor async_xor raid6_pq async_pq async_raid6_recov raid456 linear arc4 sha256_generic cbc **************************** * WARNING * No fsck for your rootfs * could be found. * This might be bad! * Please install: /sbin/fsck.rpc_pipefs **************************** Features: dm block usb md lvm2 luks Bootsplash: hardDrive (1920x1080), hardDrive (800x600) Then I restart nfs related service c-3po:~ # rcnfs restart c-3po:~ # rcnfsserver restart and get a new result c-3po:~ # "env" "rootfstype=ext4" "mkinitrd" "-d" "/dev/null" "-m" "ext3 ext4 btrfs reiserfs binfmt_misc virtio_pci virtio_blk" "-k" "/boot/vmlinuz" "-i" "/boot/initrd-3.0.0-4-desktop-virtio" Kernel image: /boot/vmlinuz Initrd image: /boot/initrd-3.0.0-4-desktop-virtio /usr device: /dev/mapper/vgsys-lvsuse (mounted on /usr as ext4) Resume device: /dev/vgsys/lvswap enabling LUKS support for /dev/md1 (cr_md1) modprobe: Module kernel not found. WARNING: no dependencies for kernel module 'kernel' found. Kernel Modules: zlib_deflate btrfs reiserfs binfmt_misc virtio virtio_pci virtio_ring virtio_blk dm-mod dm-crypt dm-snapshot sunrpc auth_rpcgss nfs_acl lockd nfsd raid0 raid1 raid10 async_tx async_memcpy xor async_xor raid6_pq async_pq async_raid6_recov raid456 linear arc4 sha256_generic cbc **************************** * WARNING * No fsck for your rootfs * could be found. * This might be bad! * Please install: /sbin/fsck.nfsd **************************** Features: dm block usb md lvm2 luks Bootsplash: hardDrive (1920x1080), hardDrive (800x600) This seems to be related to the new feature added to get /usr mounted in initrd. my /usr is on the / root partition (a lvm on top of a raid0 encrypted) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.