https://bugzilla.novell.com/show_bug.cgi?id=876346 https://bugzilla.novell.com/show_bug.cgi?id=876346#c0 Summary: Wake on LAN not working with 13.1 (but working with 12.1 on same machine) Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: joschibrauchle@gmx.de QAContact: qa-bugs@suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:29.0) Gecko/20100101 Firefox/29.0 On a machine where Wake-on-LAN is enabled in BIOS, the machine a) does NOT wake up from standby or poweroff in openSUSE 13.1, BUT b) does wake up from standy with openSUSE 12.1 LiveCD. Poweroff was not tested. Diagnose for openSUSE 13.1: -------------------------------------------------------- Before standby: -------------------------------------------------------- # ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on MDI-X: off (auto) Supports Wake-on: pumbg Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes # ethtool -s eth0 wol g Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on MDI-X: off (auto) Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes # cat /proc/acpi/wakeup Device S-state Status Sysfs node PEXA S4 *disabled PEXX S4 *disabled PEXB S4 *disabled pci:0000:00:1c.0 PEXC S4 *disabled pci:0000:00:1c.4 PEXD S4 *disabled USB1 S3 *enabled pci:0000:00:1d.0 USB2 S3 *enabled pci:0000:00:1d.1 USB3 S3 *enabled pci:0000:00:1d.2 USB4 S3 *enabled pci:0000:00:1a.0 USB5 S3 *enabled pci:0000:00:1a.1 USB6 S3 *enabled pci:0000:00:1a.2 USB7 S3 *disabled USB8 S3 *enabled pci:0000:00:1d.7 USB9 S3 *enabled pci:0000:00:1a.7 LAN S4 *enabled pci:0000:00:19.0 PCIH S4 *disabled pci:0000:00:1e.0 KEYB S1 *enabled pnp:00:08 PS2M S1 *disabled pnp:00:09 # pm-suspend -------------------------------------------------------- Going to standby... WOL WAS NOT WORKING, machine did not powerup from standby. Resuming by pressing power button. After resume: -------------------------------------------------------- # ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on MDI-X: off (auto) Supports Wake-on: pumbg Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes # cat /proc/acpi/wakeup Device S-state Status Sysfs node PEXA S4 *disabled PEXX S4 *disabled PEXB S4 *disabled pci:0000:00:1c.0 PEXC S4 *disabled pci:0000:00:1c.4 PEXD S4 *disabled USB1 S3 *enabled pci:0000:00:1d.0 USB2 S3 *enabled pci:0000:00:1d.1 USB3 S3 *enabled pci:0000:00:1d.2 USB4 S3 *enabled pci:0000:00:1a.0 USB5 S3 *enabled pci:0000:00:1a.1 USB6 S3 *enabled pci:0000:00:1a.2 USB7 S3 *disabled USB8 S3 *enabled pci:0000:00:1d.7 USB9 S3 *enabled pci:0000:00:1a.7 LAN S4 *disabled pci:0000:00:19.0 PCIH S4 *disabled pci:0000:00:1e.0 KEYB S1 *enabled pnp:00:08 PS2M S1 *disabled pnp:00:09 -------------------------------------------------------- More details: # hwinfo --netcard 16: PCI 19.0: 0200 Ethernet controller [Created at pci.319] Unique ID: rBUF.hO2O_T8oBY8 SysFS ID: /devices/pci0000:00/0000:00:19.0 SysFS BusID: 0000:00:19.0 Hardware Class: network Model: "Intel 82566DM-2 Gigabit Network Connection" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x10bd "82566DM-2 Gigabit Network Connection" SubVendor: pci 0x1734 "Fujitsu Technology Solutions" SubDevice: pci 0x10fd Revision: 0x02 Driver: "e1000e" Driver Modules: "e1000e" Device File: eth0 Memory Range: 0xd0020000-0xd003ffff (rw,non-prefetchable) Memory Range: 0xd0007000-0xd0007fff (rw,non-prefetchable) I/O Ports: 0x1820-0x183f (rw) IRQ: 44 (2111 events) HW Address: 00:19:99:3b:07:5b Link detected: yes Module Alias: "pci:v00008086d000010BDsv00001734sd000010FDbc02sc00i00" Driver Info #0: Driver Status: e1000e is active Driver Activation Cmd: "modprobe e1000e" Config Status: cfg=no, avail=yes, need=no, active=unknown -------------------------------------------------------- One can see, the ethtool output AFTER resume shows that wake on lan is DISABLED on eth0. The machine does NOT wake up from a magic paket during standby in openSUSE 13.1 (but DOES wake up when using 12.1 live CD). Hence, at some point in time during going to standby, it looks like WOL is being disabled! Reproducible: Always Steps to Reproduce: 1. enable WOL using ethtool 2. go to standby 3. try to wake up machine with magic packet Actual Results: Machine does not wake up with 13.1, but does so in 12.1 Expected Results: Machine should wake up in 13.1 as in 12.1 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.