https://bugzilla.novell.com/show_bug.cgi?id=767088 https://bugzilla.novell.com/show_bug.cgi?id=767088#c0 Summary: SATA drives not detected when connected to SATA0-3 ports of Gigabyte GA-A75M-S2V rev 1.0 Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: x86-64 OS/Version: openSUSE 12.1 Status: NEW Severity: Major Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers@forge.provo.novell.com ReportedBy: 42048@deadaddress.com QAContact: qa-bugs@suse.de Found By: --- Blocker: --- User-Agent: Opera/9.80 (Windows NT 5.1; U; en) Presto/2.10.229 Version/11.64 Drives are not detected when connected to one of the first four (of total six) motherboard's build-in SATA ports. Works flawlessly with the last two (SATA4-5). Problem occur both when trying to install OpenSuse 12.1 (installer don't detect any drives connected to ports SATA0-3) and also when connecting a drive to already installed OS. Tested with a WD Green WD5000AZRX SATA disk and a LG GH24NS90 DVD-RW SATA optical drive, both using legacy "Native IDE" mode set in BIOS. Problem do not occur when running Windows 7 SP1 64-bit. Reproducible: Always Steps to Reproduce: 1. Connect a SATA drive (HDD or optical) to one of the SATA0-3 ports 2. In BIOS set SATA mode for those ports to "Native IDE" 3. Boot from OpenSUSE 12.1 installation DVD 4. Run OS installation in default (graphical) mode 5. Check if the drive from step 1. has been detected by the installer -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.