https://bugzilla.novell.com/show_bug.cgi?id=457888 User mvdv@spamcop.net added comment https://bugzilla.novell.com/show_bug.cgi?id=457888#c5 Summary: ipw2200: Firmware error detected. Restarting. When options led=1 Product: openSUSE 11.0 Version: Final Platform: i586 OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: Network AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: mvdv@spamcop.net QAContact: qa@suse.de Found By: Customer With a default install I always see the following in /var/log/messages: Dec 10 17:05:11 pm kernel: ipw2200: Firmware error detected. Restarting. Dec 10 17:14:03 pm kernel: ipw2200: Firmware error detected. Restarting. Dec 10 17:21:50 pm kernel: ipw2200: Firmware error detected. Restarting. Dec 10 17:34:38 pm kernel: ipw2200: Firmware error detected. Restarting. I noticed that: # cat /etc/modprobe.d/ipw2200 options ipw2200 hwcrypto=0 led=1 The following fix worked for me: # echo 'options ipw2200 hwcrypto=0' >/etc/modprobe.d/ipw2200 # rmmod ipw2200 # modprobe ipw2200 Some details: # hwinfo --network 29: None 01.0: 10701 Ethernet [Created at net.124] Unique ID: L2Ua.ndpeucax6V1 Parent ID: JNkJ.bkR_kpaUAJA SysFS ID: /class/net/eth1 SysFS Device Link: /devices/pci0000:00/0000:00:1e.0/0000:03:00.0/ssb0:0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "b44" Driver Modules: "ssb", "b44" Device File: eth1 HW Address: 00:12:3f:e7:71:b7 Link detected: yes Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #5 (Ethernet controller) 30: None 00.0: 10701 Ethernet [Created at net.124] Unique ID: usDW.ndpeucax6V1 Parent ID: rBUF.AhQTN4Gud10 SysFS ID: /class/net/eth0 SysFS Device Link: /devices/pci0000:00/0000:00:1e.0/0000:03:03.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "ipw2200" Driver Modules: "ipw2200" Device File: eth0 HW Address: 00:13:ce:47:8e:38 Link detected: no Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #1 (WLAN controller) 31: None 00.0: 10700 Loopback [Created at net.124] Unique ID: ZsBS.GQNx7L4uPNA SysFS ID: /class/net/lo Hardware Class: network interface Model: "Loopback network interface" Device File: lo Link detected: yes Config Status: cfg=no, avail=yes, need=no, active=unknown pm:~ # iwconfig lo no wireless extensions. eth1 no wireless extensions. eth0 unassociated ESSID:off/any Mode:Managed Channel=0 Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power=20 dBm Sensitivity=8/0 Retry limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:182 Missed beacon:0 pm:~ # hwinfo --wlan 01: PCI 303.0: 0282 WLAN controller [Created at pci.310] UDI: /org/freedesktop/Hal/devices/pci_8086_4220 Unique ID: rBUF.C8kmJvRynV3 Parent ID: 6NW+.InKz0bgid89 SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:03.0 SysFS BusID: 0000:03:03.0 Hardware Class: network Model: "Intel PRO/Wireless 2200BG Network Connection" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x4220 "PRO/Wireless 2200BG Network Connection" SubVendor: pci 0x8086 "Intel Corporation" SubDevice: pci 0x2722 Revision: 0x05 Driver: "ipw2200" Driver Modules: "ipw2200" Device File: eth0 Features: WLAN Memory Range: 0xdcffd000-0xdcffdfff (rw,non-prefetchable) IRQ: 17 (no events) HW Address: 00:13:ce:47:8e:38 Link detected: no WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 WLAN bitrates: 1 2 5.5 11 6 9 12 18 24 36 48 54 WLAN encryption modes: WEP40 WEP104 TKIP CCMP WLAN authentication modes: open sharedkey wpa-psk wpa-eap Requires: ipw-firmware Module Alias: "pci:v00008086d00004220sv00008086sd00002722bc02sc80i00" Driver Info #0: Driver Status: ipw2200 is active Driver Activation Cmd: "modprobe ipw2200" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #12 (PCI bridge) pm:~ # hal-device | grep "net\.interface =" net.interface = 'eth0' (string) net.interface = 'eth1' (string) Hope that helps -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.