[Bug 215626] New: snd_hda_intel sound driver loading fail and stop booting in first start, after fully finished installation
https://bugzilla.novell.com/show_bug.cgi?id=215626 Summary: snd_hda_intel sound driver loading fail and stop booting in first start, after fully finished installation Product: openSUSE 10.2 Version: Beta 1 Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Sound AssignedTo: tiwai@novell.com ReportedBy: zreizinger@hdsnet.hu QAContact: qa@suse.de Acer 5102 laptop, similar bug: 140238. I tried install 10.2 Beta1, after some work on 10.1 with failed alsa and kernel source. The 10.2 beta1 installed sucessfully, first login with working sound system. After reboot I get messeages : <4>ALSA sound/pci/hda/hda_codec.c:212: hda_codec: invalid dep_range_val 0:7fff <4>ALSA sound/pci/hda/hda_codec.c:212: hda_codec: invalid dep_range_val 0:7fff <7>ALSA sound/pci/hda/hda_intel.c:590: hda-intel: get_response timeout: IRS=0x0 and hang booting process. After hard reset I started again with safe settings, but deleted all options. System started and sound system working. part of boot.msg: Inspecting /boot/System.map-2.6.18.1-7-default Loaded 23925 symbols from /boot/System.map-2.6.18.1-7-default. Symbols match kernel version 2.6.18. No module symbols loaded - kernel modules not enabled. klogd 1.4.1, log source = ksyslog started. t: IRS=0x0 <4>ALSA sound/pci/hda/hda_codec.c:212: hda_codec: invalid dep_range_val 0:7fff <4>ALSA sound/pci/hda/hda_codec.c:212: hda_codec: invalid dep_range_val 0:7fff <7>ALSA sound/pci/hda/hda_intel.c:590: hda-intel: get_response timeout: IRS=0x0 (similar rows <4><4><7> on seven pages in Kwrite) <4>ALSA sound/pci/hda/hda_codec.c:212: hda_codec: invalid dep_range_val 0:7fff <7>ALSA sound/pci/hda/hda_intel.c:590: hda-intel: get_response timeout: IRS=0x0 <7>ALSA sound/pci/hda/hda_intel.c:590: hda-intel: get_response timeout: IRS=0x0 <7>ALSA sound/pci/hda/hda_generic.c:643: hda_generic: no proper input path found <7>ALSA sound/pci/hda/hda_generic.c:417: hda_generic: no proper output path found <7>ALSA sound/pci/hda/hda_generic.c:916: hda_generic: no PCM found <6>GSI 18 sharing vector 0xD9 and IRQ 18 <6>ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 217 <6>ehci_hcd 0000:00:13.2: EHCI Host Controller <6>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 <6>ehci_hcd 0000:00:13.2: irq 217, io mem 0xc0006000 <6>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 <6>usb usb1: new device found, idVendor=0000, idProduct=0000 <6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb1: Product: EHCI Host Controller <6>usb usb1: Manufacturer: Linux 2.6.18.1-7-default ehci_hcd <6>usb usb1: SerialNumber: 0000:00:13.2 <6>usb usb1: configuration #1 chosen from 1 choice <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 8 ports detected <6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 <6>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 217 <6>ohci_hcd 0000:00:13.0: OHCI Host Controller <6>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 <6>ohci_hcd 0000:00:13.0: irq 217, io mem 0xc0004000 <6>usb usb2: new device found, idVendor=0000, idProduct=0000 <6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb2: Product: OHCI Host Controller <6>usb usb2: Manufacturer: Linux 2.6.18.1-7-default ohci_hcd <6>usb usb2: SerialNumber: 0000:00:13.0 <6>usb usb2: configuration #1 chosen from 1 choice <6>hub 2-0:1.0: USB hub found <6>hub 2-0:1.0: 4 ports detected <6>ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 217 <6>ohci_hcd 0000:00:13.1: OHCI Host Controller <6>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 <6>ohci_hcd 0000:00:13.1: irq 217, io mem 0xc0005000 <6>usb usb3: new device found, idVendor=0000, idProduct=0000 <6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb3: Product: OHCI Host Controller <6>usb usb3: Manufacturer: Linux 2.6.18.1-7-default ohci_hcd <6>usb usb3: SerialNumber: 0000:00:13.1 <6>usb usb3: configuration #1 chosen from 1 choice <6>hub 3-0:1.0: USB hub found <6>hub 3-0:1.0: 4 ports detected <6>usb 1-4: new high speed USB device using ehci_hcd and address 2 <6>sdhci: SDHCI controller found at 0000:06:04.2 [1524:0550] (rev 1) <6>GSI 19 sharing vector 0xE1 and IRQ 19 <6>ACPI: PCI Interrupt 0000:06:04.2[B] -> GSI 23 (level, low) -> IRQ 225 <6>mmc0: SDHCI at 0xc0210800 irq 225 DMA <6>piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device <6>GSI 20 sharing vector 0xE9 and IRQ 20 <6>ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 21 (level, low) -> IRQ 233 <6>eth0: RealTek RTL8139 at 0xffffc20000032000, 00:16:d4:12:4f:20, IRQ 233 <7>eth0: Identified 8139 chip type 'RTL-8100B/8139D' <6>Yenta: CardBus bridge found at 0000:06:04.0 [1025:009f] <6>Yenta: Using CSCINT to route CSC interrupts to PCI <6>Yenta: Routing CardBus interrupts to PCI <6>Yenta TI: socket 0000:06:04.0, mfunc 0x90501212, devctl 0x44 <6>usb 1-4: new device found, idVendor=0402, idProduct=5602 <6>usb 1-4: new device strings: Mfr=0, Product=1, SerialNumber=0 <6>usb 1-4: Product: USB2.0 Camera <6>usb 1-4: configuration #1 chosen from 1 choice <6>Yenta: ISA IRQ mask 0x0cf8, PCI irq 177 <6>Socket status: 30000006 <6>pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff <6>pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff <6>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff <6>ohci_hcd 0000:00:13.0: wakeup <4>hda_codec: num_steps = 0 for NID=0xb <4>hda_codec: num_steps = 0 for NID=0xb <4>hda_codec: num_steps = 0 for NID=0xb <6>usb 2-3: new low speed USB device using ohci_hcd and address 2 <6>usb 2-3: new device found, idVendor=15d9, idProduct=0a33 <6>usb 2-3: new device strings: Mfr=0, Product=1, SerialNumber=0 <6>usb 2-3: Product: USB Mouse <6>usb 2-3: configuration #1 chosen from 1 choice <6>usbcore: registered new driver hiddev <6>input: USB Mouse as /class/input/input4 <6>input: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:13.0-3 <6>usbcore: registered new driver usbhid <6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver <6>Adding 1261060k swap on /dev/hda6. Priority:-1 extents:1 across:1261060k <6>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com <6>loop: loaded (max 8 devices) <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hda8, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>NTFS driver 2.1.27 [Flags: R/W MODULE]. Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console (deleted)) at Fri Oct 27 13:41:35 2006 udevd[931]: add_to_rules: invalid rule '/etc/udev/rules.d/71-multipath.rules:20' Loading AppArmor module done Mounting securityfs on /sys/kernel/security done Loading AppArmor profiles done Starting udevd done Loading required kernel modules doneActivating swap-devices in /etc/fstab... doneActivating device mapper... done done Starting MD Raid done Waiting for udev to settle... Scanning for LVM volume groups... Reading all physical volumes. This may take a while... No volume groups found No volume groups found Activating LVM volume groups... No volume groups found done Checking file systems... fsck 1.39 (29-May-2006) /dev/hda8: clean, 801/1881088 files, 282239/15044840 blocks donedone Mounting local file systems... proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) debugfs on /sys/kernel/debug type debugfs (rw) udev on /dev type tmpfs (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/hda8 on /home type ext3 (rw,acl,user_xattr) /dev/hda2 on /windows/C type ntfs (ro,noexec,nosuid,nodev,gid=100,umask=0002,nls=utf8) /dev/hda5 on /windows/D type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,utf8=true) doneSetting current sysctl status from /etc/sysctl.conf net.ipv4.icmp_echo_ignore_broadcasts = 1 net.ipv4.conf.all.rp_filter = 1 done Enabling syn flood protectiondone Disabling IP forwardingdone done Setting up the hardware clockdone Setting up hostname 'laptop2'done Setting up loopback interface lo lo IP address: 127.0.0.1/8 done <notice>killproc: kill(914,29) Creating /var/log/boot.msg doneStarting Firewall Initialization (phase 1 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. done Activating remaining swap-devices in /etc/fstab... donedone System Boot Control: The system has been set up System Boot Control: Running /etc/init.d/boot.local done<notice>killproc: kill(914,3) INIT: Entering runlevel: 5 Boot logging started on /dev/tty1(/dev/console) at Fri Oct 27 11:41:56 2006 Master Resource Control: previous runlevel: N, switching to runlevel: 5 done ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ] Initializing random number generatordone <notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=normal RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 SPLASH=no ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/sbin/syslog-ng ] <notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/sbin/resmgrd ] Starting D-Bus daemondone Starting resource managerdone <notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=normal RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 SPLASH=no ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/sbin/klogd ] Loading AppArmor profiles - AppArmor already loaded with profiles.skipped Starting syslog servicesdone Starting irqbalance unused <notice>startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system<notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/sbin/acpid ] acpid: loading CPUFreq modulesdone acpid: loading ACPI modules ( ac battery button ) done acpid: will not skip unsupported modules acpid: loading ACPI laptop modules ( ) done Starting acpid done <notice>startproc: execve (/usr/sbin/polkitd) [ /usr/sbin/polkitd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/polkitd ] Starting PolicyKit daemondone <notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/hald ] Starting HAL daemondone <notice>startproc: execve (/usr/sbin/dhcdbd) [ /usr/sbin/dhcdbd --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/dhcdbd ] <notice>startproc: execve (/usr/sbin/NetworkManagerDispatcher) [ /usr/sbin/NetworkManagerDispatcher ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManagerDispatcher ] <notice>startproc: execve (/usr/sbin/NetworkManager) [ /usr/sbin/NetworkManager ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManager ] Starting the DHCP DBUS Daemondone Starting the NetworkManagerDispatcherdone Starting the NetworkManagerdone If service network should wait until connection is established then set /etc/sysconfig/network/config:NM_ONLINE_TIMEOUT <notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/sbin/portmap ] Starting RPC portmap daemondone Importing Net File System (NFS)unused Checking/updating CPU microcode unused <notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] Starting Name Service Cache Daemondone Starting nfsboot (sm-notify) done <notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] <notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -n ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/sbin/auditd ] Starting SSH daemondone Starting auditd done Starting mail service (Postfix)Loading keymap i386/qwertz/hu.map.gz doneLoading compose table latin2done Start Unicode mode doneLoading console font lat2-16.psfu -m trivial G0:loadable doneStarting ZENworks Management Daemondone <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/usr/bin:/sbin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ] Starting powersaved: done done <notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/cron ] Starting CRON daemondone Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=normal RUNLEVEL=5 SPLASHCFG= PWD=/ LANG=hu_HU.UTF-8 PREVLEVEL=N LINES=25 QT_SYSTEM_DIR=/usr/share/desktop-data HOME=/ SHLVL=2 XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/bin/kde SPLASH=no ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ] done <notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=normal RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/hda7 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ] Starting service kdmdone Starting cupsddone Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. SuSEfirewall2: Warning: no interface active done Master Resource Control: runlevel 5 has been reached Skipped services in runlevel 5: irq_balancer nfs microcode splash <notice>killproc: kill(2369,3) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=215626 tiwai@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |zreizinger@hdsnet.hu ------- Comment #1 from tiwai@novell.com 2006-10-27 04:46 MST ------- The communication between the sound chip looks completely broken. It's often a problem of ACPI or broken BIOS. Try to boot once with a boot option pci=noacpi or acpi=off. If it doesn't help, the driver won't work very likely in the development frame of SUSE 10.2, unfortunately. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=215626 ------- Comment #2 from zreizinger@hdsnet.hu 2006-10-27 06:15 MST ------- My BIOS is 2.0, the newest. (Knoppix 5.0.1 works well, Sabayon 3.1, too) pci=noacpi and acpi=off does not help, same results. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=215626 wearabnet@yahoo.ca changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |wearabnet@yahoo.ca ------- Comment #3 from wearabnet@yahoo.ca 2006-11-05 10:47 MST ------- Same as my bug https://bugzilla.novell.com/show_bug.cgi?id=217669 My bios is My BIOS is 2.0 which is the latest too. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=215626 aarmstrong@mma.edu changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |aarmstrong@mma.edu ------- Comment #4 from aarmstrong@mma.edu 2006-11-06 22:54 MST ------- The same (or similar) problem exists in the 32 bit version of Beta 1 on an Acer Aspire 3100. The interesting thing is that if you wait long enough (two minutes or so) the computer boots and select programs can play music. I've had luck with Amarok for .ogg's and twice with Kaffeine for CD's. The command lspci yields: <snip> .. Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01) .. <snap> and it seems others have had similar problems with this card: http://www.gentoo-wiki.com/HARDWARE_Acer_Aspire_5102WLMi http://chamine.ru/sha/linux/aspire5112_gentoo.html http://www.mail-archive.com/debian-user@lists.debian.org/msg452713.html The Gentoo wiki gives a possible solution but I have not yet tried it. Alex -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=215626 wearabnet@yahoo.ca changed: What |Removed |Added ---------------------------------------------------------------------------- Severity|Normal |Blocker ------- Comment #5 from wearabnet@yahoo.ca 2006-11-06 23:42 MST ------- Alex, Thank you for the useful links. Takashi could we please have this sorted out before the final release of 10.2? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=215626 ------- Comment #6 from aarmstrong@mma.edu 2006-11-07 17:55 MST ------- Compiling ALSA 1.0.13 from source and installing the drivers corrects one error message: <snip> <7>ALSA sound/pci/hda/hda_intel.c:590: hda-intel: get_response timeout: IRS=0x0 <snap> The other error remains, but the line number in hda_codec.c changes to 215: (Original error) <snip> <4>ALSA sound/pci/hda/hda_codec.c:212: hda_codec: invalid dep_range_val 0:7fff <snap> (New error. Note the path is where it was compiled.) <snip> <4>ALSA /home/alex/Desktop/alsa-driver-1.0.13/pci/hda/hda_codec.c:215: hda_codec: invalid dep_range_val 0:7fff <snap> Looking at the hda_codec.c file shows that the error comes from a function that is looking for connections. And that's as far as I've gone into ALSA, so I will defer to someone who knows more about the Linux sound system. If I can provide more info let me know. Thanks, Alex -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=215626 tiwai@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Severity|Blocker |Major ------- Comment #7 from tiwai@novell.com 2006-11-08 04:10 MST ------- The audio of Acer laptops are not supported by 2.6.18.x kernel, at least. It _might_ work with the very latest ALSA version (from HG repo). Try to get and build ALSA driver (alsa-kernel + alsa-driver) from HG repository. See the download page of www.alsa-project.org. If the driver still doesn't work, try to add model=acer to "options snd-hda-intel" line in /etc/modprobe.d/sound. (This model doesn't exist in 2.6.18 kernel, only in the newer ALSA drivers.) Anyway, changed the severity to MAJOR because this is a device-specific issue. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=215626 ------- Comment #8 from tiwai@novell.com 2006-11-08 04:13 MST ------- *** Bug 217669 has been marked as a duplicate of this bug. *** -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=215626 ------- Comment #9 from aarmstrong@mma.edu 2006-11-17 14:04 MST ------- The bug still exists in Beta 2 but is less sever. I've found the boot error messages cut out quicker than in Beta 1, and both Kaffeine and Amarok can play music (though Kaffeine will only start as root). No recording yet. I can compile the modules from the HG repo. but I may be missing a step when installing them. I use the hgcompile scrip and it builds the modules fine. Then to install is use: earth$ make modules-install And here's where I get a bit confused. I will use modprobe to load the new modules and then run YaST to set up the sound card. Things seem to go well, but after restarting I only have mono sound. I've used alsaconf with similar results. Also, I still get the errors during boot. For the moment though, the default install is usable. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=215626 ------- Comment #10 from wearabnet@yahoo.ca 2006-11-22 01:48 MST ------- Alex, Acer released a new bios 2.4 can you check it? maybe it will help with the current bug? [Fixed history] <SYS BIOS> v2.40- 01. Fix AMD BIOS Check failure and add Errata 125. v2.30- 01. Fix somtimes Synaptics 4-way button fail when using tptest.exe on dos. 02. Add brightness function on win vista. 03. Auto Change FIR PNPID for Vista OS 04. Update VBIOS for M62 & M66 05. Patch for user password lost after HDD password set then pressing Ctrl-Alt-Del to restart system. v2.20- 01. Show complete cpu type string in setup. v2.10- 01. Fix Single Core CPU C3 VID_VDD Voltage Not Correct. 02. Fix Battery Can't be Charged Continuative after BIOS WinPhlash. 03. Update PXE ROM for Realtek 8110SCL LAN Chip. 04. Add Codes to Support SLP 2.0 . <EC BIOS> v2.40- 1.> Rename EC Version. v2.30- 1.> <ENCIC039>, <Touch pad >Synaptics 8.2.19.0, touchpade crazy. 2.> Modify brightness function for VISTA. 3.> Turn on W/L power after cold boot. Thank you, -Abdullah -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=215626 ------- Comment #11 from zreizinger@hdsnet.hu 2006-11-25 09:58 MST ------- I installed 2.4 bios and beta2 I has same start up results as Alex. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=215626 aarmstrong@mma.edu changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|zreizinger@hdsnet.hu | ------- Comment #12 from aarmstrong@mma.edu 2006-12-03 18:10 MST ------- Same here, things remain unchanged after I have upgraded to 2.4 bios and installed RC1. Still have the error messages during boot (though cut out after about 10 seconds), no recording, but do have limited playback with Amarok and Kaffeine. Alex -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=215626 ------- Comment #13 from zreizinger@hdsnet.hu 2007-02-12 11:42 MST ------- 2.72 BIOS same results. (10.2) Zoltan -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=215626 wearabnet@yahoo.ca changed: What |Removed |Added ---------------------------------------------------------------------------- Version|Beta 1 |Final ------- Comment #14 from wearabnet@yahoo.ca 2007-02-13 00:16 MST ------- For your info, it works for me in DesktopBSD 1.6-RC1 which is based on FreeBSD 6.2 and the patch from http://people.freebsd.org/~ariff/ http://people.freebsd.org/~ariff/snd_RELENG_6_20070212_142_lowlatency.diff.g... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=215626 tiwai@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |RESOLVED Resolution| |LATER ------- Comment #15 from tiwai@novell.com 2007-02-26 07:02 MST ------- The fix is in upstream (2.6.21 kernel), so resolved to LATER for now until openSUSE kernel gets updated. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=215626 User coolo@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=215626#c16 Stephan Kulow <coolo@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|RESOLVED |REOPENED Resolution|LATER | --- Comment #16 from Stephan Kulow <coolo@novell.com> 2008-06-25 03:19:13 MDT --- mass reopening all 10.2 LATER+REMIND bugs. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=215626 User coolo@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=215626#c17 Stephan Kulow <coolo@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|REOPENED |RESOLVED Resolution| |WONTFIX --- Comment #17 from Stephan Kulow <coolo@novell.com> 2008-06-25 03:23:25 MDT --- close all 10.2 LATER/REMIND bugs as WONTFIX. Reopen yourself if you still plan to work on it. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
participants (1)
-
bugzilla_noreply＠novell.com