https://bugzilla.novell.com/show_bug.cgi?id=638836 https://bugzilla.novell.com/show_bug.cgi?id=638836#c0 Summary: Webcam automatically switched on during startup Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: 64bit OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Bootloader AssignedTo: jsrain@novell.com ReportedBy: opensuse@os-cs.de QAContact: jsrain@novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; de; rv:1.9.2.8) Gecko/20100723 SUSE/3.6.8-0.1.1 Firefox/3.6.8 Ever since openSuSE 11.3 my webcam is automatically switched on, after my notebook returned from standby. Since a few days/weeks (not sure) my webcam is always activated when I start the system (there's a small LED next to the built in webcam to indicate activity). Workaround: Start wxCam after booting the system and close it again. Reproducible: Always Steps to Reproduce: 1. Boot. 2. Look at webcam status LED. Optional: B1. Go to standby B2. Switch back on B3. Look at webcam status LED. Actual Results: Webcam is on and active. Expected Results: Webcam not active. Should only be activated by software. Laptop is an Asus P50IJ with a built-in webcam. The kernel-module is uvcvideo. hwinfo yields this information about the webcam: USB 00.0: 0000 Unclassified device [Created at usb.122] Unique ID: 2UT6.ex6nf2XXXXX Parent ID: k4bc.cO89g+iefn1 SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0 SysFS BusID: 1-3:1.0 Hardware Class: unknown Model: "PixArt Imaging USB2.0 UVC VGA WebCam" Hotplug: USB Vendor: usb 0x13d3 "PixArt Imaging Inc." Device: usb 0x5094 "USB2.0 UVC VGA WebCam" Revision: "2.13" Driver: "uvcvideo" Driver Modules: "uvcvideo" Device File: /dev/input/event8 Device Files: /dev/input/event8, /dev/char/13:72, /dev/input/by-id/usb-PixArt_Imaging_Inc._USB2.0_UVC_VGA_WebCam-event-if00, /dev/input/by-path/pci-0000:00:1a.7-usb-0:3:1.0-event Device Number: char 13:72 Speed: 480 Mbps Module Alias: "usb:v13D3p5094d0213dcEFdsc02dp01ic0Eisc01ip00" Driver Info #0: Driver Status: uvcvideo is active Driver Activation Cmd: "modprobe uvcvideo" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #41 (Hub) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.