https://bugzilla.novell.com/show_bug.cgi?id=244167 Summary: Suddenly Hung up Product: openSUSE 10.2 Version: Final Platform: i586 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers@forge.provo.novell.com ReportedBy: mlus@hintmark.com QAContact: qa@suse.de Sorry, this is first post , so I can't write good report. I use OpenSUSE10.2 in run level 3. Suddenly host is hung up. Display is blank. Keyboard is not work, Network connection (SSH) is not work. So i have to shutdown by PowerButton OFF force. I don't know Why OpenSUSE10.2 is hung up. Reboot after hung, I see /var/log/message . I can't get information about hung up. This host was no problem under OpenSUSE10.1. I wonder why opensuse10.2 recognize SMP, this host has only one cpu. HARD WARE CPU:AMD GeodeNX Mother: TomcatK7M(TYAN) HDD: IDE HDD PCIModemCard : 2 use ------------dmesg------------------------------ Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001bee0000 (usable) BIOS-e820: 000000001bee0000 - 000000001bee3000 (ACPI NVS) BIOS-e820: 000000001bee3000 - 000000001bef0000 (ACPI data) BIOS-e820: 000000001bef0000 - 000000001bf00000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 446MB LOWMEM available. found SMP MP-table at 000f4db0 On node 0 totalpages: 114400 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 110304 pages, LIFO batch:31 DMI 2.2 present. Using APIC driver default IO/L-APIC allowed because system is MP or new enough ACPI: RSDP (v000 KN400 ) @ 0x000f8bf0 ACPI: RSDT (v001 KN400 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1bee3040 ACPI: FADT (v001 KN400 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1bee30c0 ACPI: MADT (v001 KN400 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1bee8080 ACPI: DSDT (v001 KN400 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:8 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 20000000 (gap: 1bf00000:e2d00000) Detected 1400.087 MHz processor. Built 1 zonelists. Total pages: 114400 Kernel command line: root=/dev/hda3 vga=0x317 resume=/dev/hda2 splash=verbose bootsplash: verbose mode. mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 446504k/457600k available (1697k kernel code, 10464k reserved, 968k data, 196k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 2803.52 BogoMIPS (lpj=5607059) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 16k freed checking if image is initramfs... it is Freeing initrd memory: 3149k freed ACPI: Core revision 20060707 CPU0: AMD Athlon(tm) Processor stepping 01 Total of 1 processors activated (2803.52 BogoMIPS). ENABLING IO-APIC IRQs .TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 1 CPUs migration_cost=0 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb020, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *5 ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 *10 11 12) ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [ALKA] (IRQs *20) ACPI: PCI Interrupt Link [ALKB] (IRQs *21) ACPI: PCI Interrupt Link [ALKC] (IRQs *22), disabled. ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:02: ioport range 0x4000-0x407f could not be reserved pnp: 00:02: ioport range 0x5000-0x500f has been reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: ec000000-edffffff PREFETCH window: e8000000-ebffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered Machine check exception polling timer started. apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1171063356.868:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Bypassing VIA 8237 APIC De-Assert Message vesafb: framebuffer at 0xe8000000, mapped to 0xdc880000, using 6144k, total 65536k vesafb: mode is 1024x768x16, linelength=2048, pages=41 vesafb: protected mode interface info at c000:2a2f vesafb: pmi: set display start = c00c2a7d, set palette = c00c2aee vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 81749 bytes,<6>...found (1024x768, 46202 bytes, v3). Console: switching to colour frame buffer device 124x44 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 input: AT Translated Set 2 keyboard as /class/input/input1 input: ImExPS/2 Generic Explorer Mouse as /class/input/input2 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 1 Using IPI No-Shortcut mode ACPI: (supports S0 S1 S3 S4 S5) Time: tsc clocksource has been installed. Freeing unused kernel memory: 196k freed Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:0f.1 ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169 PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 9 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: Hitachi HDT725025VLAT80, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 512KiB hda: 488397168 sectors (250059 MB) w/7372KiB Cache, CHS=30401/255/63, UDMA(133) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 Probing IDE interface ide1... hdc: MATSHITADVD-RAM LF-M821, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Thermal Zone [THRM] (25 C) ACPI: Fan [FAN] (on) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Attempting manual resume Time: acpi_pm clocksource has been installed. kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). Intel(R) PRO/1000 Network Driver - version 7.1.9-k4-NAPI Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 21 (level, low) -> IRQ 177 SCSI subsystem initialized e1000: 0000:00:0e.0: e1000_probe: (PCI:33MHz:32-bit) 00:e0:81:55:52:4e Linux agpgart interface v0.101 (c) Dave Jones pci_hotplug: PCI Hot Plug PCI Core version: 0.5 usbcore: registered new driver usbfs usbcore: registered new driver hub hsfsoar: no version for "struct_module" found: kernel tainted. libata version 2.00 loaded. USB Universal Host Controller Interface driver v3.0 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection hsfengine: module license 'see LICENSE file distributed with driver' taints kernel. agpgart: Detected VIA KM400/KM400A chipset agpgart: AGP aperture is 128M @ 0xe0000000 sata_via 0000:00:0f.0: version 2.0 ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169 sata_via 0000:00:0f.0: routed to hard irq line 11 ata1: SATA max UDMA/133 cmd 0xDA00 ctl 0xDB02 bmdma 0xDE00 irq 169 ata2: SATA max UDMA/133 cmd 0xDC00 ctl 0xDD02 bmdma 0xDE08 irq 169 scsi0 : sata_via ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0xDA07 scsi1 : sata_via ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0xDC07 ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177 PCI: VIA IRQ fixup for 0000:00:10.0, from 11 to 1 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: irq 177, io base 0x0000e100 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd usb usb1: SerialNumber: 0000:00:10.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177 PCI: VIA IRQ fixup for 0000:00:10.1, from 11 to 1 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.1: irq 177, io base 0x0000e200 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd usb usb2: SerialNumber: 0000:00:10.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177 PCI: VIA IRQ fixup for 0000:00:10.2, from 11 to 1 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.2: irq 177, io base 0x0000e300 usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd usb usb3: SerialNumber: 0000:00:10.2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177 PCI: VIA IRQ fixup for 0000:00:10.3, from 11 to 1 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.3: irq 177, io base 0x0000e400 usb usb4: new device found, idVendor=0000, idProduct=0000 usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd usb usb4: SerialNumber: 0000:00:10.3 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 8139cp 0000:00:0a.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip 8139cp 0000:00:0a.0: Try the "8139too" driver instead. ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 17 (level, low) -> IRQ 185 ttySHSF0 at I/O 0xd800 (irq = 185) is a Conexant HSF softmodem (PCI-14f1:2f20-14f1:2014) ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 19 (level, low) -> IRQ 193 ttySHSF1 at I/O 0xdf00 (irq = 193) is a Conexant HSF softmodem (PCI-14f1:2f30-14f1:2051) ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177 PCI: VIA IRQ fixup for 0000:00:10.4, from 5 to 1 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:10.4: irq 177, io mem 0xee080000 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: new device found, idVendor=0000, idProduct=0000 usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: EHCI Host Controller usb usb5: Manufacturer: Linux 2.6.18.2-34-default ehci_hcd usb usb5: SerialNumber: 0000:00:10.4 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected hub 5-0:1.0: over-current change on port 7 8139too Fast Ethernet driver 0.9.27 ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 22 (level, low) -> IRQ 201 eth1: RealTek RTL8139 at 0xdd052000, 00:e0:81:55:52:4d, IRQ 201 eth1: Identified 8139 chip type 'RTL-8100B/8139D' hub 5-0:1.0: over-current change on port 8 Adding 530136k swap on /dev/hda2. Priority:-1 extents:1 across:530136k device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com loop: loaded (max 8 devices) kjournald starting. Commit interval 5 seconds EXT3 FS on hda4, internal journal EXT3-fs: mounted filesystem with ordered data mode. AppArmor: AppArmor initialized audit(1171063376.703:2): AppArmor initialized ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] powernow-k8: Processor cpuid 681 not supported powernow: PowerNOW! Technology present. Can scale: frequency and voltage. powernow: Trying ACPI perflib powernow: ACPI perflib can not be used in this platform powernow: ACPI and legacy methods failed powernow: See http://www.codemonkey.org.uk/projects/cpufreq/powernow-k7.shtml e1000: eth0: e1000_watchdog: NIC Link is Up 10 Mbps Full Duplex audit(1171030988.890:3): audit_pid=2864 old=0 by auid=4294967295 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.