https://bugzilla.novell.com/show_bug.cgi?id=749648 https://bugzilla.novell.com/show_bug.cgi?id=749648#c0 Summary: Cannot connect to wireless 3G using Sierra Mercury USBConnect via GNOME NetworkManager Classification: openSUSE Product: openSUSE 11.4 Version: Final Platform: x86-64 OS/Version: openSUSE 11.1 Status: NEW Severity: Major Priority: P5 - None Component: Network AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: sagiben@gmail.com QAContact: qa@suse.de CC: sagiben@gmail.com, bili@suse.com, dtschmitz@gmail.com Depends on: 470851 Found By: --- Blocker: --- Created an attachment (id=478664) --> (http://bugzilla.novell.com/attachment.cgi?id=478664) modem-manager.log Per Bin Li request I'm opening a new bug. Unfortunately, currently I can't install openSUSE 12.1 on my laptop so this bug is open for 11.4. +++ This bug was initially created as a clone of Bug #470851 +++ User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1b3pre) Gecko/20090129 Shiretoko/3.1b3pre Ubiquity/0.1.5 begin output in message log: Jan 29 19:18:05 linux-dv2000z modem-manager: (/dev/ttyUSB4) opening serial device... Jan 29 19:18:05 linux-dv2000z modem-manager: Got failure code 100: Unknown error Jan 29 19:18:15 linux-dv2000z modem-manager: Got failure code 100: Unknown error Jan 29 19:18:15 linux-dv2000z modem-manager: Closing device '/dev/ttyUSB4' ================== end output begin dmesg output: usb 1-3: new high speed USB device using ehci_hcd and address 16 usb 1-3: configuration #1 chosen from 1 choice usb-storage: probe of 1-3:1.0 failed with error -5 usb 1-3: New USB device found, idVendor=1199, idProduct=0fff usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3 usb 1-3: Product: USB MMC Storage usb 1-3: Manufacturer: Sierra Wireless, Incorporated usb 1-3: SerialNumber: SWOC22905731 usb 1-3: USB disconnect, address 16 usb 1-3: new high speed USB device using ehci_hcd and address 17 usb 1-3: configuration #1 chosen from 1 choice sierra 1-3:1.0: Sierra USB modem converter detected usb 1-3: Sierra USB modem converter now attached to ttyUSB0 sierra 1-3:1.1: Sierra USB modem converter detected usb 1-3: Sierra USB modem converter now attached to ttyUSB1 sierra 1-3:1.2: Sierra USB modem converter detected usb 1-3: Sierra USB modem converter now attached to ttyUSB2 sierra 1-3:1.3: Sierra USB modem converter detected usb 1-3: Sierra USB modem converter now attached to ttyUSB3 sierra 1-3:1.4: Sierra USB modem converter detected usb 1-3: Sierra USB modem converter now attached to ttyUSB4 sierra 1-3:1.5: Sierra USB modem converter detected usb 1-3: Sierra USB modem converter now attached to ttyUSB5 sierra 1-3:1.6: Sierra USB modem converter detected usb 1-3: Sierra USB modem converter now attached to ttyUSB6 scsi20 : SCSI emulation for USB Mass Storage devices usb 1-3: New USB device found, idVendor=1199, idProduct=6880 usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3 usb 1-3: Product: HSPA Modem usb 1-3: Manufacturer: Sierra Wireless, Incorporated usb 1-3: SerialNumber: 1234567890ABCDEF usb-storage: device found at 17 usb-storage: waiting for device to settle before scanning scsi 20:0:0:0: Direct-Access SWI SD Card 2.31 PQ: 0 ANSI: 2 sd 20:0:0:0: [sdb] Attached SCSI removable disk sd 20:0:0:0: Attached scsi generic sg2 type 0 usb-storage: device scan complete end dmesg output =================== utmsmon's system page shows the device uses serial ports: AT: ttyUSB6 PPP: ttyUSB3 A test connect with utmsmon works fine using: login: WAP.CINGULARGPRS.COM pw: CINGULAR1 AP: wap.cingular A test connect with wvdial and dial entry sc works fine. wvdial.conf: [Dialer sc] Phone = *99***1# Username = WAP@CINGULARGPRS.COM Password = CINGULAR1 Modem = /dev/ttyUSB6 Init1 = ATH Init2 = ATE1 Init3 = AT+CGDCONT=1,"IP","wap.cingular","0.0.0.0",0,0 Stupid Mode = yes ================ I've added to /etc/hal/fdi/information/modems.fdi the following but it made no difference--still no connect as reflected above in the /var/log/message output: <?xml version="1.0" encoding="UTF-8"?> <!-- -*- xml -*- --> <deviceinfo version="0.2"> <device> <!-- Sierra Modems --> <match key="@info.parent:usb.vendor_id" int="0x1199"> <!-- GSM/EDGE/UMTS/HSDPA/HSUPA modems In left-to-right order of product ID: C885 0x6880 --> <match key="@info.parent:usb.product_id" int_outof="0x6880"> <match key="@info.parent:usb.interface.number" int="4"> <append key="info.capabilities" type="strlist">modem</append> <append key="modem.command_sets" type="strlist">GSM-07.07</append> <append key="modem.command_sets" type="strlist">GSM-07.05</append> </match> </match> </match> </device> </deviceinfo> ==================== I appreciate everything you guys do--openSUSE is GREAT! Let me know what else you need! Thank you and kindest regards, --Dietrich The modem is a subsidy Sierra 885 Compass branded for AT&T as a 'USBConnect Mercury'. I've gone to the extent of downloading the newest Factory NetworkManager: http://download.opensuse.org/repositories/GNOME:/Factory:/Next/openSUSE_Fact... NetworkManager-gnome: http://download.opensuse.org/repositories/GNOME:/Factory:/Next/openSUSE_Fact... Reproducible: Always Steps to Reproduce: 1.plug in usb modem--wait for it to initialize to a powered up 'blue' light 2.click on NetworkManager and clock ATT wireless device 3. Actual Results: no connection within 10-15 seconds Expected Results: should connect to ATT EDGE/3G Data network +++ end of clone of Bug #470851 +++ -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.