https://bugzilla.novell.com/show_bug.cgi?id=813086 https://bugzilla.novell.com/show_bug.cgi?id=813086#c0 Summary: Computer reboots after kernel loader when installing unless ACPI disabled Classification: openSUSE Product: openSUSE 12.3 Version: Final Platform: x86 OS/Version: openSUSE 12.3 Status: NEW Severity: Critical Priority: P5 - None Component: Bootloader AssignedTo: jsrain@suse.com ReportedBy: david.sydney.poole@gmail.com QAContact: jsrain@suse.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.31 (KHTML, like Gecko) Chrome/26.0.1410.43 Safari/537.31 Attempting to install openSUSE 12.3 onto a Dell OptiPlex GX520 Pentium 4 HT-based system, latest firmware (A11). Select Installation from menu, kernel begins to load, switches to text screen and about where udev loads, the computer reboots itself. Do an installation with kernel options ACPI Off and installation works fine. After installation, if acpi=off is removed from GRUB2, computer exhibits same reboot issue at the point where udev loads. Computer will only finish boot if acpi=off is in the GRUB2 config. Reproducible: Always Steps to Reproduce: 1.Attempt install of openSUSE 12.3 on Dell OptiPlex GX520 (repeated this on several of these systems) 2.Use default setup configuration 3.Select to Begin Installation Actual Results: Computer reaches point where udev appears to be loading and then reboots. Expected Results: I would expect the computer NOT to reboot. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.