https://bugzilla.novell.com/show_bug.cgi?id=379922 User dave.plater@yahoo.co.uk added comment https://bugzilla.novell.com/show_bug.cgi?id=379922#c2 --- Comment #2 from Dave Plater 2008-04-15 06:46:33 MST --- Created an attachment (id=207963) --> (https://bugzilla.novell.com/attachment.cgi?id=207963) zypper logs I have my local repos and Factory http://download.opensuse.org/distribution/SL-OSS-factory/inst-source/ only enabled. I am just recovering my system from a zypper nuke see bug #379480 if you need the logs from my old system they are there. I only have a 10.3 kde cd and I upgraded zypper first as it keeps downloaded packages. If I manually download the package there is no problem and I don't experience any other downloading problems I use pppoe on a dsl router running a 2.4 kernel nic :- 12: PCI 14.0: 0200 Ethernet controller [Created at pci.300] UDI: /org/freedesktop/Hal/devices/pci_10de_269 Unique ID: rBUF.KLwMYdJJVcA SysFS ID: /devices/pci0000:00/0000:00:14.0 SysFS BusID: 0000:00:14.0 Hardware Class: network Model: "Foxconn International MCP51 Ethernet Controller" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x0269 "MCP51 Ethernet Controller" SubVendor: pci 0x105b "Foxconn International, Inc." SubDevice: pci 0x0d04 Revision: 0xa1 Driver: "forcedeth" Driver Modules: "forcedeth" Device File: eth0 Memory Range: 0xfe02b000-0xfe02bfff (rw,non-prefetchable) I/O Ports: 0xd400-0xd407 (rw) IRQ: 19 (2932374 events) HW Address: 00:15:58:63:90:10 Link detected: yes Module Alias: "pci:v000010DEd00000269sv0000105Bsd00000D04bc06sc80i00" Driver Info #0: Driver Status: forcedeth is active Driver Activation Cmd: "modprobe forcedeth" Config Status: cfg=no, avail=yes, need=no, active=unknown As I said before I have experienced this problem with yast as well. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=379922 User dave.plater@yahoo.co.uk added comment https://bugzilla.novell.com/show_bug.cgi?id=379922#c4 --- Comment #4 from Dave Plater 2008-04-17 04:15:39 MST --- I just had the problem with yast, the factory repo was obviously being updated as one file which failed to download had a version change. So far icedax, cairo and autotrace have had the problem. icedax and cairo downloaded after I had manually downloaded them but autotrace gives the following error in konqueror :- The file or folder http://mirror.internode.on.net/pub/opensuse/distributions/SL-OSS-factory/ins... does not exist. Investigation shows that the above mirror has version -554 which is older. Maybe that is what is happening and manually downloading switches the mirror? Downloading the correct file from mirrors.kernel.org which had both 554 and 555 had no effect on yast and I've had to skip the file. As a work around I'm going to try adding mirrors.kernel.org as another repository. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=379922 User jreidinger@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=379922#c7 --- Comment #7 from Josef Reidinger 2008-05-02 07:41:23 MST --- one thing I forget, before reproducing please delete all attach points in /var/adm/mount (he looks like AP*****). Old cache make it permanent and now it is only temporary. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=379922 User jreidinger@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=379922#c9 --- Comment #9 from Josef Reidinger 2008-05-06 00:59:20 MST --- (In reply to comment #8 from Dave Plater)

I have followed your instructions and after using zypper and yast I now have the following empty directory /var/adm/mount/AP_0x00000001 is this correct? I have not had a downloading problem with zypper since comment 4 but I have used yast mostly, in fact my test of zypper as a result of your needinfo has produced another bug 385980. I have experienced several situations with yast download error "BAD" and on click retry the package successfully downloads and installs. Those problems should be in the new yast log posted to bug 385980. I will use zypper more often to test.

Yes, now this directory is not removed by libzypp, but this should be fixed. Because YaST and zypper uses same backend and callback for downloads it looks like this bug has been fixed. Thanks for testing. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=379922 User dave.plater@yahoo.co.uk added comment https://bugzilla.novell.com/show_bug.cgi?id=379922#c11 --- Comment #11 from Dave Plater 2008-05-25 01:58:50 MDT --- Created an attachment (id=217991) --> (https://bugzilla.novell.com/attachment.cgi?id=217991) zypper, wireshark and yast logs Just had almost identical problem with yast, copying the file manually to cache allowed yast to continue. I downgraded the package again (libdvdread3-0.9.7-5.i586.rpm) and tried in zypper. This time zypper wanted to use my altfactory, ftp://mirrors.kernel.org and I got the following cli :- The following package is going to be upgraded: libdvdread3 Overall download size: 50.0 K. After the operation, additional 4.0 K will be used. Continue? [YES/no]: Downloading package libdvdread3-0.9.7-5.i586, 50.0 K (127.0 K unpacked) Media source 'ftp://mirrors.kernel.org/opensuse/distribution/SL-OSS-factory/inst-source/' does not contain the desired medium Abort, retry, ignore? [A/r/i]: r Downloading: libdvdread3-0.9.7-5.i586.rpm [error] Download (curl) error for 'ftp://mirrors.kernel.org/opensuse/distribution/SL-OSS-factory/inst-source/suse/i586/libdvdread3-0.9.7-5.i586.rpm': Error code: Connection failed Error message: couldn't connect to host Abort, retry, ignore? [A/r/i]: r Downloading: libdvdread3-0.9.7-5.i586.rpm [error] Download (curl) error for 'ftp://mirrors.kernel.org/opensuse/distribution/SL-OSS-factory/inst-source/suse/i586/libdvdread3-0.9.7-5.i586.rpm': Error code: Connection failed Error message: couldn't connect to host Abort, retry, ignore? [A/r/i]: r Downloading: libdvdread3-0.9.7-5.i586.rpm [error] Download (curl) error for 'ftp://mirrors.kernel.org/opensuse/distribution/SL-OSS-factory/inst-source/suse/i586/libdvdread3-0.9.7-5.i586.rpm': Error code: Connection failed Error message: couldn't connect to host Abort, retry, ignore? [A/r/i]: i I manually downloaded package to altfactory cache and this time it would not complete the installation so I aborted (ignore). I switched off altfactory and zypper downloaded and installed. Downgraded and tried again with zypper after deleting the rpm in cache (keeppackages turned on) and had a serious problem getting file installed. I used wireshark at one stage and it has logged unsuccessful and successful downloads. I eventually had konquerer and zypper trying simultaneously to achive a successful installation recorded by wireshark. Hope this helps streamline installation even more. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=379922 User dave.plater@yahoo.co.uk added comment https://bugzilla.novell.com/show_bug.cgi?id=379922#c13 --- Comment #13 from Dave Plater 2008-05-26 03:38:27 MDT --- Happened again this morning in yast. Selecting a simultaneous download in konquerer causes a mirror switch. Seems like a different mirror needs to be selected on retry. You could even have a limited automatic retry if you switched mirrors. This would solve a few downloading problems I've noticed on the factory list. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=379922 User jreidinger@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=379922#c15 Josef Reidinger changed: What |Removed |Added ---------------------------------------------------------------------------- Status|REOPENED |RESOLVED Resolution| |FIXED --- Comment #15 from Josef Reidinger 2008-05-27 00:27:47 MDT --- yes, bug 369531 is good place for this request, because from log I see that, this is connection problem, not bug in libzypp (it looks like some mirror have problems). I close it. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=379922 User jreidinger@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=379922#c17 --- Comment #17 from Josef Reidinger 2008-05-27 00:49:19 MDT --- (In reply to comment #16 from Dave Plater)

Shouldn't it be marked as a duplicate of bug 369531?

no, because this bug start with real bug in caching which is fixed. So if server again return 304 return code (not changed) for corrupted files It can be reopen. https://bugzilla.novell.com/show_bug.cgi?id=369531 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.