https://bugzilla.suse.com/show_bug.cgi?id=1176734 https://bugzilla.suse.com/show_bug.cgi?id=1176734#c20 --- Comment #20 from Ralf Gerhauser <debug@fantasymail.de> --- Thank you for your advice. I tried both configurations: - config_a works - config_b shows the same effects (timeout loop) as with "nm" You could find the verbose logs above, the following is just the short version.

...

...

config_a <<< mgmt::auth mgmt::auth cb mgmt::assoc_req mgmt::assoc_resp cb WPA: 54:40:ad:4e:94:f8 WPA_PTK_GROUP entering state IDLE WPA: 54:40:ad:4e:94:f8 WPA_PTK entering state AUTHENTICATION WPA: 54:40:ad:4e:94:f8 WPA_PTK entering state AUTHENTICATION2 hostapd_logger: STA 54:40:ad:4e:94:f8 - sending 1/4 msg of 4-Way Handshake hostapd_logger: STA 54:40:ad:4e:94:f8 - received EAPOL-Key frame (2/4 Pairwise) WPA: 54:40:ad:4e:94:f8 WPA_PTK entering state PTKCALCNEGOTIATING2 WPA: 54:40:ad:4e:94:f8 WPA_PTK entering state PTKINITNEGOTIATING hostapd_logger: STA 54:40:ad:4e:94:f8 - sending 3/4 msg of 4-Way Handshake WPA: Encrypt Key Data using AES-WRAP (KEK length 16) WPA: EAPOL-Key MIC using HMAC-SHA1 WPA: 54:40:ad:4e:94:f8 WPA_PTK entering state PTKINITDONE wlan0: P2P: Marking group formation completed on GO on first data connection wlan0: AP-STA-CONNECTED 54:40:ad:4e:94:f8 nl80211: Set STA flags - ifname=wlan0 addr=54:40:ad:4e:94:f8 total_flags=0x63 flags_or=0x1 flags_and=0xffffffff authorized=1 hostapd_logger: STA 54:40:ad:4e:94:f8 - authorizing port hostapd_logger: STA 54:40:ad:4e:94:f8 - pairwise key handshake completed (RSN)

...

...

config_b <<< mgmt::auth mgmt::auth cb mgmt::assoc_req mgmt::assoc_resp cb WPA: 54:40:ad:4e:94:f8 WPA_PTK_GROUP entering state IDLE WPA: 54:40:ad:4e:94:f8 WPA_PTK entering state AUTHENTICATION WPA: 54:40:ad:4e:94:f8 WPA_PTK entering state AUTHENTICATION2 WPA: 54:40:ad:4e:94:f8 WPA_PTK entering state PTKSTART hostapd_logger: STA 54:40:ad:4e:94:f8 - sending 1/4 msg of 4-Way Handshake WPA: Send EAPOL(version=1 secure=0 mic=0 ack=1 install=0 pairwise=1 kde_len=0 keyidx=0 encr=0) WPA: Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 01 WPA: Use EAPOL-Key timeout of 100 ms (retry counter 1) wlan0: hostapd_new_assoc_sta: reschedule ap_handle_timer timeout for 54:40:ad:4e:94:f8 (300 seconds - ap_max_inactivity) wlan0: Event EAPOL_TX_STATUS (37) received hostapd_logger: STA 54:40:ad:4e:94:f8 - EAPOL-Key timeout WPA: 54:40:ad:4e:94:f8 WPA_PTK entering state PTKSTART hostapd_logger: STA 54:40:ad:4e:94:f8 - sending 1/4 msg of 4-Way Handshake ... WPA: Use EAPOL-Key timeout of 1000 ms (retry counter 4) wlan0: Event EAPOL_TX_STATUS (37) received hostapd_logger: STA 54:40:ad:4e:94:f8 - EAPOL-Key timeout WPA: 54:40:ad:4e:94:f8 WPA_PTK entering state PTKSTART hostapd_logger: STA 54:40:ad:4e:94:f8 - PTKSTART: Retry limit 4 reached WPA: 54:40:ad:4e:94:f8 WPA_PTK entering state DISCONNECT

-- You are receiving this mail because: You are on the CC list for the bug.