https://bugzilla.novell.com/show_bug.cgi?id=696813 https://bugzilla.novell.com/show_bug.cgi?id=696813#c2 --- Comment #2 from Sid Boyce 2011-05-29 18:35:18 UTC --- If I start Xorg from a tty I just get a black screen and no mouse pointer. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=696813 https://bugzilla.novell.com/show_bug.cgi?id=696813#c4 --- Comment #4 from Sid Boyce 2011-05-29 20:48:11 UTC --- I added a second USB mouse, same result. Both work in tty mode. [ 3920.684] (**) Option "xkb_model" "evdev" [ 3920.684] (**) Option "xkb_layout" "gb" [ 3920.684] (II) config/udev: Adding input device KYE EasyTrack Optical U+P (/dev/input/event7) [ 3920.684] (**) KYE EasyTrack Optical U+P: Applying InputClass "evdev pointer catchall" [ 3920.684] (**) KYE EasyTrack Optical U+P: always reports core events [ 3920.684] (**) KYE EasyTrack Optical U+P: Device: "/dev/input/event7" [ 3920.684] (--) KYE EasyTrack Optical U+P: Found 3 mouse buttons [ 3920.684] (--) KYE EasyTrack Optical U+P: Found scroll wheel(s) [ 3920.684] (--) KYE EasyTrack Optical U+P: Found relative axes [ 3920.684] (--) KYE EasyTrack Optical U+P: Found x and y relative axes [ 3920.684] (II) KYE EasyTrack Optical U+P: Configuring as mouse [ 3920.684] (II) KYE EasyTrack Optical U+P: Adding scrollwheel support [ 3920.684] (**) KYE EasyTrack Optical U+P: YAxisMapping: buttons 4 and 5 [ 3920.684] (**) KYE EasyTrack Optical U+P: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 3920.684] (II) XINPUT: Adding extended input device "KYE EasyTrack Optical U+P" (type: MOUSE) [ 3920.684] (**) KYE EasyTrack Optical U+P: (accel) keeping acceleration scheme 1 [ 3920.684] (**) KYE EasyTrack Optical U+P: (accel) acceleration profile 0 [ 3920.684] (**) KYE EasyTrack Optical U+P: (accel) acceleration factor: 2.000 [ 3920.684] (**) KYE EasyTrack Optical U+P: (accel) acceleration threshold: 4 [ 3920.684] (II) KYE EasyTrack Optical U+P: initialized for relative axes. [ 3920.684] (II) config/udev: Adding input device KYE EasyTrack Optical U+P (/dev/input/mouse1) [ 3920.684] (II) No input driver/identifier specified (ignoring) [ 3920.685] (II) config/udev: Adding input device Logitech Trackball (/dev/input/event2) [ 3920.685] (**) Logitech Trackball: Applying InputClass "evdev pointer catchall" [ 3920.685] (**) Logitech Trackball: always reports core events [ 3920.685] (**) Logitech Trackball: Device: "/dev/input/event2" [ 3920.685] (--) Logitech Trackball: Found 3 mouse buttons [ 3920.685] (--) Logitech Trackball: Found scroll wheel(s) [ 3920.685] (--) Logitech Trackball: Found relative axes [ 3920.685] (--) Logitech Trackball: Found x and y relative axes [ 3920.685] (II) Logitech Trackball: Configuring as mouse [ 3920.685] (II) Logitech Trackball: Adding scrollwheel support [ 3920.685] (**) Logitech Trackball: YAxisMapping: buttons 4 and 5 [ 3920.685] (**) Logitech Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 3920.685] (II) XINPUT: Adding extended input device "Logitech Trackball" (type: MOUSE) [ 3920.685] (**) Logitech Trackball: (accel) keeping acceleration scheme 1 [ 3920.685] (**) Logitech Trackball: (accel) acceleration profile 0 [ 3920.685] (**) Logitech Trackball: (accel) acceleration factor: 2.000 [ 3920.685] (**) Logitech Trackball: (accel) acceleration threshold: 4 [ 3920.685] (II) Logitech Trackball: initialized for relative axes. [ 3920.685] (II) config/udev: Adding input device Logitech Trackball (/dev/input/mouse0) [ 3920.685] (II) No input driver/identifier specified (ignoring) [ 3920.685] (II) config/udev: Adding input device CH PRODUCTS CH PRO PEDALS USB (/dev/input/event3) [ 3920.685] (II) No input driver/identifier specified (ignoring) [ 3920.686] (II) config/udev: Adding input device CH PRODUCTS CH PRO PEDALS USB (/dev/input/js0) [ 3920.686] (II) No input driver/identifier specified (ignoring) [ 3920.686] (II) config/udev: Adding input device CH PRODUCTS CH FLIGHT SIM YOKE USB (/dev/input/event4) [ 3920.686] (II) No input driver/identifier specified (ignoring) [ 3920.686] (II) config/udev: Adding input device CH PRODUCTS CH FLIGHT SIM YOKE USB (/dev/input/js1) [ 3920.686] (II) No input driver/identifier specified (ignoring) [ 3920.741] (II) Power Button: Close [ 3920.741] (II) UnloadModule: "evdev" [ 3920.773] (II) Power Button: Close [ 3920.773] (II) UnloadModule: "evdev" [ 3920.805] (II) NOVATEK Kensington U+P Keyboard: Close [ 3920.805] (II) UnloadModule: "evdev" [ 3920.837] (II) NOVATEK Kensington U+P Keyboard: Close [ 3920.837] (II) UnloadModule: "evdev" [ 3920.869] (II) KYE EasyTrack Optical U+P: Close [ 3920.869] (II) UnloadModule: "evdev" [ 3920.905] (II) Logitech Trackball: Close [ 3920.905] (II) UnloadModule: "evdev" -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=696813 https://bugzilla.novell.com/show_bug.cgi?id=696813#c6 --- Comment #6 from Sid Boyce 2011-05-29 23:49:23 UTC --- # startx /etc/X11/xim: Checking whether an input method should be started. sourcing /etc/sysconfig/language to get the value of INPUT_METHOD INPUT_METHOD is not set or empty (no user selected input method). Trying to start a default input method for the locale en_GB.UTF-8 ... There is no default input method for the current locale. Dummy input method "none" (do not use any fancy input method by default) xinit: connection to X server lost waiting for X server to shut down -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=696813 https://bugzilla.novell.com/show_bug.cgi?id=696813#c Stefan Dirsch changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO InfoProvider| |sboyce@blueyonder.co.uk -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=696813 https://bugzilla.novell.com/show_bug.cgi?id=696813#c9 --- Comment #9 from Sid Boyce 2011-05-30 02:43:23 UTC --- Thanks, "X -retro" works and I have the mouse cursor. Next step? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=696813 https://bugzilla.novell.com/show_bug.cgi?id=696813#c11 --- Comment #11 from Sid Boyce 2011-05-30 08:19:19 UTC --- Thanks, "X -retro" works and I have the mouse cursor. Next step? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=696813 https://bugzilla.novell.com/show_bug.cgi?id=696813#c13 Sid Boyce changed: What |Removed |Added ---------------------------------------------------------------------------- Priority|P3 - Medium |P5 - None Status|ASSIGNED |NEW AssignedTo|sndirsch@novell.com |bnc-team-xorg-bugs@forge.pr | |ovo.novell.com --- Comment #13 from Sid Boyce 2011-05-30 10:05:31 UTC --- Thanks, "X -retro" works and I have the mouse cursor. Next step? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=696813 https://bugzilla.novell.com/show_bug.cgi?id=696813#c15 --- Comment #15 from Sid Boyce 2011-05-30 10:10:27 UTC --- Without the "-retro" X fails. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=696813 https://bugzilla.novell.com/show_bug.cgi?id=696813#c16 Stefan Dirsch changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO InfoProvider| |sboyce@blueyonder.co.uk --- Comment #16 from Stefan Dirsch 2011-05-30 10:16:54 UTC --- Ok. Please *attach* the *complete* logfile *with and without* the "-retro" option. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=696813 https://bugzilla.novell.com/show_bug.cgi?id=696813#c18 --- Comment #18 from Sid Boyce 2011-05-30 10:51:13 UTC --- Created an attachment (id=432097) --> (http://bugzilla.novell.com/attachment.cgi?id=432097) With "xinit -- /usr/bin/X -br -retro" "-retro" brings up X and a xterm. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=696813 https://bugzilla.novell.com/show_bug.cgi?id=696813#c20 --- Comment #20 from Sid Boyce 2011-05-30 11:43:59 UTC --- That was fixed after I reported it to the NVidia forum. Without the patch to conftest.sh, the kernel module failed to build. Everything worked until after I did a "zypper dup" to Milestone 1 and then tried a reboot with nothing else changed as far as the kernel and the nvidia driver are concerned. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=696813 https://bugzilla.novell.com/show_bug.cgi?id=696813#c22 --- Comment #22 from Sid Boyce 2011-05-30 12:19:25 UTC --- I wonder -- I have a PS/2 mouse port, connecting 2 different mice to it, they don't work. The one with the USB->PS/2 adapter lights up but doesn't work. That could be a hardware bug that's getting in the way. I know the PS/2 mouse works on another box and the other one works on this box when connected to a USB port. There is no option in the BIOS to turn it off. I'll try kernel reconfiguration. CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_MOUSE_PS2_SENTELIC=y CONFIG_MOUSE_PS2_TOUCHKIT=y CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_APPLETOUCH=m CONFIG_MOUSE_BCM5974=m CONFIG_MOUSE_VSXXXAA=m CONFIG_MOUSE_GPIO=m CONFIG_MOUSE_SYNAPTICS_I2C=m CONFIG_USB_MOUSE=m # CONFIG_HID_MAGICMOUSE is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_HYPERV_MOUSE is not set -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=696813 https://bugzilla.novell.com/show_bug.cgi?id=696813#c24 Sid Boyce changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO InfoProvider| |sboyce@blueyonder.co.uk --- Comment #24 from Sid Boyce 2011-05-30 12:59:39 UTC --- Still the problem is there. CONFIG_INPUT_MOUSEDEV=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_GPIO is not set # CONFIG_MOUSE_SYNAPTICS_I2C is not set CONFIG_USB_MOUSE=y # CONFIG_HID_MAGICMOUSE is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_HYPERV_MOUSE is not set # l /dev/input total 0 drwxr-xr-x 4 root root 340 May 30 13:46 ./ drwxr-xr-x 18 root root 3980 May 30 13:54 ../ drwxr-xr-x 2 root root 220 May 30 13:46 by-id/ drwxr-xr-x 2 root root 220 May 30 13:46 by-path/ crw-r----- 1 root root 13, 64 May 30 13:46 event0 crw-r----- 1 root root 13, 65 May 30 13:46 event1 crw-r----- 1 root root 13, 66 May 30 13:46 event2 crw-r----- 1 root root 13, 67 May 30 13:46 event3 crw-r----- 1 root root 13, 68 May 30 13:46 event4 crw-r----- 1 root root 13, 69 May 30 13:46 event5 crw-r----- 1 root root 13, 70 May 30 13:46 event6 crw-r----- 1 root root 13, 71 May 30 13:46 event7 crw-r--r-- 1 root root 13, 0 May 30 13:46 js0 crw-r--r-- 1 root root 13, 1 May 30 13:46 js1 crw-r----- 1 root root 13, 63 May 30 13:46 mice crw-r----- 1 root root 13, 32 May 30 13:46 mouse0 crw-r----- 1 root root 13, 33 May 30 13:46 mouse1 # l /dev/input/by-id total 0 drwxr-xr-x 2 root root 220 May 30 13:46 ./ drwxr-xr-x 4 root root 340 May 30 13:46 ../ lrwxrwxrwx 1 root root 9 May 30 13:46 usb-CH_PRODUCTS_CH_FLIGHT_SIM_YOKE_USB-event-joystick -> ../event5 lrwxrwxrwx 1 root root 6 May 30 13:46 usb-CH_PRODUCTS_CH_FLIGHT_SIM_YOKE_USB-joystick -> ../js1 lrwxrwxrwx 1 root root 9 May 30 13:46 usb-CH_PRODUCTS_CH_PRO_PEDALS_USB-event-if00 -> ../event4 lrwxrwxrwx 1 root root 9 May 30 13:46 usb-KYE_EasyTrack_Optical_U+P-event-mouse -> ../event2 lrwxrwxrwx 1 root root 9 May 30 13:46 usb-KYE_EasyTrack_Optical_U+P-mouse -> ./mouse0 lrwxrwxrwx 1 root root 9 May 30 13:46 usb-Logitech_Trackball-event-mouse -> ./event3 lrwxrwxrwx 1 root root 9 May 30 13:46 usb-Logitech_Trackball-mouse -> ./mouse1 lrwxrwxrwx 1 root root 9 May 30 13:46 usb-NOVATEK_Kensington_U+P_Keyboard-event-if01 -> ../event1 lrwxrwxrwx 1 root root 9 May 30 13:46 usb-NOVATEK_Kensington_U+P_Keyboard-event-kbd -> ../event0 # l /dev/input/by-path total 0 drwxr-xr-x 2 root root 220 May 30 13:46 ./ drwxr-xr-x 4 root root 340 May 30 13:46 ../ lrwxrwxrwx 1 root root 9 May 30 13:46 pci-0000:00:13.2-usb-0:3.1:1.0-event-kbd -> ../event0 lrwxrwxrwx 1 root root 9 May 30 13:46 pci-0000:00:13.2-usb-0:3.1:1.1-event -> ./event1 lrwxrwxrwx 1 root root 9 May 30 13:46 pci-0000:00:13.2-usb-0:3.2:1.0-event-mouse -> ../event2 lrwxrwxrwx 1 root root 9 May 30 13:46 pci-0000:00:13.2-usb-0:3.2:1.0-mouse -> ./mouse0 lrwxrwxrwx 1 root root 9 May 30 13:46 pci-0000:00:13.2-usb-0:4.3:1.0-event-mouse -> ../event3 lrwxrwxrwx 1 root root 9 May 30 13:46 pci-0000:00:13.2-usb-0:4.3:1.0-mouse -> ./mouse1 lrwxrwxrwx 1 root root 9 May 30 13:46 pci-0000:00:13.2-usb-0:4.6:1.0-event -> ./event4 lrwxrwxrwx 1 root root 9 May 30 13:46 pci-0000:00:13.2-usb-0:4.7:1.0-event-joystick -> ../event5 lrwxrwxrwx 1 root root 6 May 30 13:46 pci-0000:00:13.2-usb-0:4.7:1.0-joystick -> ../js1 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=696813 https://bugzilla.novell.com/show_bug.cgi?id=696813#c26 --- Comment #26 from Sid Boyce 2011-05-30 15:16:32 UTC --- # ps fax|grep X 10466 pts/2 S+ 0:00 \_ grep X 10382 tty2 S+ 0:00 \_ xinit -- /usr/bin/Xorg -br :0 vt7 10383 tty7 Shttps://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=696813 https://bugzilla.novell.com/show_bug.cgi?id=696813#c28 --- Comment #28 from Sid Boyce 2011-06-01 00:23:55 UTC --- Created an attachment (id=432394) --> (http://bugzilla.novell.com/attachment.cgi?id=432394) Latest Xorg.0.log -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=696813 https://bugzilla.novell.com/show_bug.cgi?id=696813#c30 --- Comment #30 from Sid Boyce 2011-06-01 02:43:27 UTC --- I have another Asus x86_64 2 CPU box with the same GeForce 8600 GT video card and the Nvidia 275.09 driver that is also at Milestone 1. I had to reboot due to a power glitch. It came up without a problem. I was fearing I'd have the same problem as on the other one, the 4 CPU box. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=696813 https://bugzilla.novell.com/show_bug.cgi?id=696813#c31 Sid Boyce changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |RESOLVED Resolution| |FIXED --- Comment #31 from Sid Boyce 2011-06-11 06:41:10 UTC --- After the latest "zypper dup" it's fixed. No idea exactly what fixed it. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.