[Bug 631701] New: unclear and partially broken (alsa)sound for 00:1b.0 (Intel HDA)
https://bugzilla.novell.com/show_bug.cgi?id=631701 https://bugzilla.novell.com/show_bug.cgi?id=631701#c0 Summary: unclear and partially broken (alsa)sound for 00:1b.0 (Intel HDA) Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Normal Priority: P5 - None Component: Sound AssignedTo: tiwai@novell.com ReportedBy: nettezzaumanaa@gmail.com QAContact: qa@suse.de Found By: --- Blocker: --- Created an attachment (id=383321) --> (http://bugzilla.novell.com/attachment.cgi?id=383321) here it comes User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.8) Gecko/20100723 SUSE/3.6.8-0.1.1 Firefox/3.6.8 hi there, i don't where to report so i'm doing it here .. i have new laptop with following card: # lspci | egrep -i audio\|sound 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) but the sound in Linux is just bad and unclear and also some channels (PCM) don't work .. feel free to request whatever you need to know. i have attached output from: # (amixer; hwinfo --sound; lspci | egrep -i audio\|sound; alsa-info.sh --stdout) >/tmp/alsa.info regards, daniel Reproducible: Always Steps to Reproduce: 1. 2. 3. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=631701 https://bugzilla.novell.com/show_bug.cgi?id=631701#c1 Takashi Iwai <tiwai@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO InfoProvider| |nettezzaumanaa@gmail.com --- Comment #1 from Takashi Iwai <tiwai@novell.com> 2010-08-20 08:10:24 UTC --- PCM volume isn't used by PulseAudio. It's no bug but a feature of PA. What do you mean "just bad unclear" exactly? I see no big problem in the mixer setup (except for low Master volume). -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=631701 https://bugzilla.novell.com/show_bug.cgi?id=631701#c2 --- Comment #2 from Daniel Pecka <nettezzaumanaa@gmail.com> 2010-08-20 15:23:56 UTC --- hello, 1) i am not using pulseaudio - i am using KDE but it behaves same also in twm with no additional KDE related stuff up 2) what is also very confusing to me is fact, that lspci prints out like i have two sound cards 3) unclear just means that sound in Linux is evidently worse then in windows .. i can't say this with sure, but it seems like only the front repro is working - subwoofer not .. feel free to demand whichever constructable output which you would use to determine if is true or false what i've wrote above .. regards, daniel -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=631701 https://bugzilla.novell.com/show_bug.cgi?id=631701#c3 --- Comment #3 from Takashi Iwai <tiwai@novell.com> 2010-08-20 15:33:32 UTC --- Then your sound backend is set up not using "default" PCM (dmix + softvol), I suppose. PCM volume appearing there is working only for softvol alsa-plugin. If the apps or the backend are using the direct access, it'll be skipped. I don't know exactly what KDE is using nowadays... And, indeed, your machine have multiple codecs, i.e. completely individual hardware components, one for analog and one for HDMI, in your machine. So, lspci is correct. About "unclearness"... it's hard to judge as long as the bug description itself is unclear ;) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=631701 https://bugzilla.novell.com/show_bug.cgi?id=631701#c4 --- Comment #4 from Daniel Pecka <nettezzaumanaa@gmail.com> 2010-08-20 16:40:03 UTC --- https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5105 ^^ i've reported it also as this. model=hp-dv5 fixes partially the problem but it's just a temporary-fix. if you think that it's useful, close this bug. ps. to your last comment .. well, i don't know what to tell to you. i've just reported, that as far as i am not alsa expert i am unable to describe it better then that sound in Linux is just much worse then in windows and that i can provide for you whichever debug outputs you could want :D .. isn't it enough or unclear? hehe anyway, thanks for your care and still, request whatever you want ;) . and don't forget: words are cheap ;) (terminal outputs not) regards, daniel -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=631701 https://bugzilla.novell.com/show_bug.cgi?id=631701#c5 --- Comment #5 from Daniel Pecka <nettezzaumanaa@gmail.com> 2010-08-23 07:43:39 UTC --- would you remove that **needinfo or just ask a Q: ?? thanks regards, daniel -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=631701 https://bugzilla.novell.com/show_bug.cgi?id=631701#c6 --- Comment #6 from Takashi Iwai <tiwai@novell.com> 2010-08-23 08:02:57 UTC --- Usually, the person who was asked for info (i.e. you :) should remove NEEDINFO flag. See the checkbox below the form. If model=hp-dv5 fixes the bug, I can simply add your device to the quirk list. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=631701 https://bugzilla.novell.com/show_bug.cgi?id=631701#c7 --- Comment #7 from Daniel Pecka <nettezzaumanaa@gmail.com> 2010-08-23 08:59:01 UTC --- i didn't ask for a god's sake my friend :D Takashi Iwai <tiwai@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO InfoProvider| |nettezzaumanaa@gmail.com . but anyway. model=hp-dv5 *doesn't fix this issue. it's just a workaround which doesn't work at 100% .. i suggest you to request from me some $output or any other $debuginfo which would help you to determine what's going on wrong in there or just close this bug regardly to fact, that i added it also in alsa's bugzilla .. so i will now say what's wrong once again: 1) with default settings (autoconfigured by yast) is sound just bad .. it seems like there is not enabled SRS subsystem and there are also not functional some of channels in alsamixer as well as there are also some not visible 2) with this fix is PCM channel not working, although it begins to affect after waking up a device from s3 (s2ram) state .. FRONT channel is not working at all regards, daniel -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=631701 https://bugzilla.novell.com/show_bug.cgi?id=631701#c8 --- Comment #8 from Takashi Iwai <tiwai@novell.com> 2010-08-23 09:22:57 UTC --- Oh, it's the first time you wrote what is actually wrong. It's a good step forward ;) Does the problem (1) remain even if you model=hp-dv5? (Or what actually "fixes" mode=hp-dv5?) [Don't forget to reset NEEDINFO flag when you answer to this question!] The problem (2) is no driver issue but it's an application or sound-backend problem. As mentioned, this mixer element is an alsa-lib softvol plugin. If the app or its backend doesn't use the alsa-lib config including this plugin, it won'r work. The fact that it starts working after S3 is just a coincidence -- or it's a bug. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=631701 https://bugzilla.novell.com/show_bug.cgi?id=631701#c9 Daniel Pecka <nettezzaumanaa@gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW InfoProvider|nettezzaumanaa@gmail.com | --- Comment #9 from Daniel Pecka <nettezzaumanaa@gmail.com> 2010-08-23 12:25:04 UTC --- model=hp-dv5 fixes, that new volume controls are available in a{,lsa}mixer app although that not all are working correctly .. i've wrote it several times before .. i've also forgot very important issue .. hdmi output is not working at all as it's listed here: http://www.alsa-project.org/db/?f=163f7a6f8eb6d96e4de52c05dfab8ce70fdf6e1f 1 [NVidia ]: HDA-Intel - HDA NVidia HDA NVidia at 0xd3000000 irq 16 regards, daniel ps. i really prefer that NEEDINFO status removes the one who actually needs a info -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=631701 https://bugzilla.novell.com/show_bug.cgi?id=631701#c10 Takashi Iwai <tiwai@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO InfoProvider| |nettezzaumanaa@gmail.com --- Comment #10 from Takashi Iwai <tiwai@novell.com> 2010-08-23 12:32:58 UTC --- Please give alsa-info.sh output (run with --no-upload option) to this bugzilla, too. (Upload it, don't paste it to the text form.) And, which volumes work and which don't with this option? Regarding HDMI output: how did you test it exactly? Doesn't "aplay -Dplug:hdmi:1 foo.wav" work? Resetting NEEDINFO by reporter is important because developers filter the pending bugs by this flag. If NEEDINFO is still set, he regards it as an unanswered bug item. This is a feature for someone who checks a few hundreds of bug entries. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=631701 https://bugzilla.novell.com/show_bug.cgi?id=631701#c11 Takashi Iwai <tiwai@suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |RESOLVED InfoProvider|nettezzaumanaa@gmail.com | Resolution| |NORESPONSE --- Comment #11 from Takashi Iwai <tiwai@suse.com> 2012-10-11 08:44:04 UTC --- NORESPONSE. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
participants (1)
-
bugzilla_noreply＠novell.com