[Bug 858128] New: upower 0.9.23-2.4.1 slows down various kde-components
https://bugzilla.novell.com/show_bug.cgi?id=858128 https://bugzilla.novell.com/show_bug.cgi?id=858128#c0 Summary: upower 0.9.23-2.4.1 slows down various kde-components Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: x86-64 OS/Version: openSUSE 13.1 Status: NEW Severity: Normal Priority: P5 - None Component: KDE4 Workspace AssignedTo: kde-maintainers@suse.de ReportedBy: christoph.strobel@gmail.com QAContact: qa-bugs@suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:26.0) Gecko/20100101 Firefox/26.0 SeaMonkey/2.23 After upgrading upower and libupower-glib1 from version 0.9.21-2.1.3 to 0.9.23-2.4.1, opening Dolphin or Gwenview for example takes between 1 and 2 minutes. Shutting down also takes more than one minute before KDE-desktop gets shut. With the previous version installed, Dolphin or Gwenview opens up immediately, shutting down is also only a matter of seconds until KDE is closed. Reproducible: Always Steps to Reproduce: 1. Upgrade upower and libupower-glib1 to 0.9.23-2.4.1 2. Open Dolphin. Actual Results: Dolphin is opened after a minute and more. Expected Results: Dolphin should be opened immediately or within few seconds (as with version 0.9.21-2.1.3). HW-Specs: Acer Aspire V3, i7-4702MQ, 16 GB RAM -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=858128 https://bugzilla.novell.com/show_bug.cgi?id=858128#c1 Hrvoje Senjan <hrvoje.senjan@gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO CC| |hrvoje.senjan@gmail.com InfoProvider| |christoph.strobel@gmail.com --- Comment #1 from Hrvoje Senjan <hrvoje.senjan@gmail.com> 2014-01-09 20:01:14 UTC --- Is UPower service running? systemctl status upower Further, please enable kdebugs for kded, and paste .xsession-errors* + ideally konsole output when trying to run dolphin/gwenview. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=858128 https://bugzilla.novell.com/show_bug.cgi?id=858128#c2 --- Comment #2 from Christoph Strobel <christoph.strobel@gmail.com> 2014-01-09 21:12:52 UTC --- Service upower is running in both cases, 0.9.21-2.1.3: Loaded: loaded (/usr/lib/systemd/system/upower.service; disabled) Active: active (running) since Do 2014-01-09 20:25:52 CET; 1h 1min ago 0.9.23-2.4.1: Loaded: loaded (/usr/lib/systemd/system/upower.service; disabled) Active: active (running) since Do 2014-01-09 21:38:42 CET; 32s ago Interestingly, the console output while starting dolphin is identical under both upower-versions: Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath) Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath) dolphin(4733) KSambaSharePrivate::testparmParamValue: We got some errors while running testparm "Load smb config files from /etc/samba/smb.conf Loaded services file OK. ERROR: pid directory /var/run/samba does not exist Thats also the case for .xsession-errors-:0, the same output is written into that file under both versions: Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath) Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath) kded(2042) KBookmarkManager::notifyChanged: KBookmarkManager::notifyChanged ( "" ) I've had debug output enabled for kded and 7020 kded4. But what I observed after the upgrade of upower to the latest version now is that the startup-time of Dolphin is not as bad as before with the current version, although it's still noticeable slower than with the previous version. I've had the suspicion that the startup time for dolphin increases in correlation to the system uptime before, this effect might appear now. So I'll further observe that. Unfortunately, I wasn't careful enough and got other updated packages installed during the upgrade of upower, which were: libzypp 13.8.5-6.1, zypper-aptitude 1.9.6-8.1, zypper-log 1.9.6-8.1, zypper 1.9.6-8.1, libgphoto2-6-32bit 2.5.2.1-2.5.1, libuuid1-32bit 2.23.2-6.1, rpm-32bit 4.11.1-6.5.1, glibc 2.18-4.11.1, glibc-info 2.18-4.11.1, nscd 2.18-4.11.1, glibc-extra 2.18-4.11.1, glibc-devel 2.18-4.11.1, libuuid1 2.23.2-6.1, libupower-glib1 0.9.23-2.4.1, libprocps1 3.3.8-5.4.1, libgphoto2-6 2.5.2.1-2.5.1, dosbox 0.74-19.4.1, coreutils 8.21-7.8.1, libuuid-devel 2.23.2-6.1, libblkid1 2.23.2-6.1, upower 0.9.23-2.4.1, glibc-locale 2.18-4.11.1, rpm 4.11.1-6.5.1, procps 3.3.8-5.4.1, libmount1 2.23.2-6.1, libblkid-devel 2.23.2-6.1, rpm-python 4.11.1-6.5.1, util-linux 2.23.2-6.1, wine-snapshot-32bit 1.7.10.20140108.1906-1.1, wine-snapshot 1.7.10.20140108.1906-1.1, wine-mono 4.5.2-7.2, simutrans 112.1-1.4. I can't judge whether any of those could have a (positive?) side effect on the behaviour expected before. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=858128 https://bugzilla.novell.com/show_bug.cgi?id=858128#c3 Christoph Strobel <christoph.strobel@gmail.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW InfoProvider|christoph.strobel@gmail.com | --- Comment #3 from Christoph Strobel <christoph.strobel@gmail.com> 2014-01-13 19:42:49 UTC --- Today the behaviour is back to the slow opening of dolphin. I've booted my system several times and the opening time was ok the previous times. systemctl status says its running and the output in .xsession-errors-:0 is the same as before: Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath) Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath) QGridLayoutEngine::addItem: Cell (0, 1) already taken The console output of starting Dolphin is also the same as last time (when it was quicker): Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath) Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath) dolphin(6478) KSambaSharePrivate::testparmParamValue: We got some errors while running testparm "Load smb config files from /etc/samba/smb.conf Loaded services file OK. ERROR: pid directory /var/run/samba does not exist What I've noticed during having a tail -f on .xsession-errors-:0 is that the lines written in there appear just in the same moment as the Dolphin window finally opens. As before, debug output for kded and 7020 kded4 and Dolphin was activated. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
participants (1)
-
bugzilla_noreply＠novell.com