https://bugzilla.novell.com/show_bug.cgi?id=308966 Summary: eth0 eth1 swaps identification between installer and running OS (yast) Product: openSUSE 10.3 Version: Beta 3 Platform: i386 OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: fbourdonnec@chez.com QAContact: jsrain@novell.com Found By: Customer Opensuse 10.3 beta3 CD boot,installation Machine: notebook ASUS-BG16E eth0, onboard, RTL-8139 wlan/eth1, mini PCI IntelPro wireless 2200BG Steps: -boot -mediacheck -accept license -probing hardware -new installation -network setup: Everything is fine here. ethernet 8139 is presented as ETH0 ->setup fixed IP the wlan is presented as ETH1 ->setup untouched eth0=ASUSTeK RTL-8139/8139C/8139C+ configured fixed IP eth1/wlan=Intel PRO/Wireless 2200BG unconfigured (DHCP) -install continues....reboot...last config steps ok. -normal boot -yast/network setup you now see eth0=ASUSTeK RTL-8139/8139C/8139C+ configured fixed IP eth1=ASUSTeK RTL-8139/8139C/8139C+ configured DHCP what happenned? The real rtl-8139 has been 'rediscovered has eth1. It has been assigned a default config (DHCP) The wlan has been assigned eth0 but also received the settings entered in installer step (eg FIXED IP) BUG: the names are exchanged but not the configurations. ******************************************************* When you remove the first config line eth0=ASUSTeK RTL-8139/8139C/8139C+ configured fixed IP the default info is displayed again eth0/wlan=Intel PRO/Wireless 2200BG unconfigured (DHCP) eth1=ASUSTeK RTL-8139/8139C/8139C+ configured DHCP but you loose initial config and eth0 is the wlan (a bad idea). Franck -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.