http://bugzilla.opensuse.org/show_bug.cgi?id=1178533 http://bugzilla.opensuse.org/show_bug.cgi?id=1178533#c5 --- Comment #5 from Togan Muftuoglu --- I will try to answer your questions here in one go Your Question 1. Let me ask, what you did after installing stunnel. Did you do something in the stunnel config file Answer: If one really wants to use stunnel (or anything like postfix opendkim amavis shorewall) s/he needs to configure the application. I have been using stunnnel over 10 years without an issue, until now with new installation of TW. So the short answer to your question is yes I have enabled my services for imap and sieve [imaps] accept = 993 connect = 192.168.1.4:143 cert = /etc/stunnel/forest_letscert.pem key = /etc/stunnel/forest_letscert_key.pem [sieve] accept = 2000 connect = 192.168.1.4:2000 cert = /etc/stunnel/forest_letscert.pem key = /etc/stunnel/forest_letscert_key.pem Your next question (or rather commment) 2. And when one comments out the line with pidfile in /usr/lib/systemd/system/stunnel.service the other problem should be solved ANSWER: I tried all variations and the current working solution I have is keep the pid file in stunnel.service but correct it # stunnel is chrooted, so pidpath is combination of 2 configfile options PIDFile=/var/lib/stunnel/var/run/stunnel.pid Change Restart from always to 5sec #Restart=always RestartSec=5s Since the recommended action to make changes to systemd service files is to call systemctl edit I have made the above corrections to the service file via the following command. systemctl edit --full stunnel.service After this all is working on my end but that doesn't mean it works for everyone. I don't need to do another test.conf setup as the above explanation is pretty obvious I believe which is not a reflection of my intended use anyway. Thanks -- You are receiving this mail because: You are on the CC list for the bug.

http://bugzilla.opensuse.org/show_bug.cgi?id=1178533 http://bugzilla.opensuse.org/show_bug.cgi?id=1178533#c7 --- Comment #7 from Andreas Vetter --- Ok. Was not sure if you put configuration in place. Clear now. test.conf only intended for simple test. So I will try in a test system, what might be a config that works for a broad spectrum of stunnel scenarios. -- You are receiving this mail because: You are on the CC list for the bug.

http://bugzilla.opensuse.org/show_bug.cgi?id=1178533 http://bugzilla.opensuse.org/show_bug.cgi?id=1178533#c11 --- Comment #11 from Togan Muftuoglu --- (In reply to Andreas Vetter from comment #10)

In the unit file: comment out or delete the lines with Restart and Pidfile. This fixes it for me.

Confirmed, fixes it for me also. Thanks -- You are receiving this mail because: You are on the CC list for the bug.