[Bug 852440] New: After clean install of openSuse 13.1 X11 fallback to FBDEV on Intel GPU
https://bugzilla.novell.com/show_bug.cgi?id=852440 https://bugzilla.novell.com/show_bug.cgi?id=852440#c0 Summary: After clean install of openSuse 13.1 X11 fallback to FBDEV on Intel GPU Classification: openSUSE Product: openSUSE 13.1 Version: Final Platform: x86-64 OS/Version: openSUSE 13.1 Status: NEW Severity: Normal Priority: P5 - None Component: X.Org AssignedTo: bnc-team-xorg-bugs@forge.provo.novell.com ReportedBy: t.bark@gmx.de QAContact: xorg-maintainer-bugs@forge.provo.novell.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Firefox/24.0 Clean install opensuse 13.1. With Intel GPU and DisplayPort Cable only 640x480 resolution possible. With Intel GPU and Dual-Link DVI only 1600x1200 resolution. WARNING: Error inserting i2c_algo_bit (/lib/modules/3.11.6-4-desktop/kernel/drivers/i2c/algos/i2c-algo-bit.ko): No such device WARNING: Error inserting drm (/lib/modules/3.11.6-4-desktop/kernel/drivers/gpu/drm/drm.ko): No such device WARNING: Error inserting drm_kms_helper (/lib/modules/3.11.6-4-desktop/kernel/drivers/gpu/drm/drm_kms_helper.ko): No such device FATAL: Error inserting i915 (/lib/modules/3.11.6-4-desktop/kernel/drivers/gpu/drm/i915/i915.ko): No such device (EE) open /dev/dri/card0: No such file or directory Reproducible: Always Steps to Reproduce: 1.clean install 2.boot 3. Actual Results: Fallback to FBDEV with small resolutions Expected Results: Full i915 driver support with full resolution (2.560 x 1.440) with Dell U2713HM Monitor Already during Installation I had to use the failsafe boot. hwinfo --gfx 10: PCI 02.0: 0300 VGA compatible controller (VGA) [Created at pci.319] Unique ID: _Znp.3vrwIVmY4TD SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: graphics card Model: "Intel Clarkdale Integrated Graphics Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x0042 "Clarkdale Integrated Graphics Controller" SubVendor: pci 0x1458 "Giga-byte Technology" SubDevice: pci 0xd000 Revision: 0x18 Memory Range: 0xfb400000-0xfb7fffff (rw,non-prefetchable) Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable) I/O Ports: 0xff00-0xff07 (rw) IRQ: 10 (no events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v00008086d00000042sv00001458sd0000D000bc03sc00i00" Driver Info #0: Driver Status: i915 is not active Driver Activation Cmd: "modprobe i915" Config Status: cfg=no, avail=yes, need=no, active=unknown Primary display adapter: #10 /var/log/gdm/:0.log This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.14.3.901 (1.14.4 RC 1) Release Date: 2013-10-26 X Protocol Version 11, Revision 0 Build Operating System: openSUSE SUSE LINUX Current Operating System: Linux music-maschine 3.11.6-4-desktop #1 SMP PREEMPT Wed Oct 30 18:04:56 UTC 2013 (e6d4a27) x86_64 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.6-4-desktop root=UUID=c19fab8d-bfa5-4924-85d6-ffa40e6934a9 apm=off acpi=off mce=off barrier=off ide=nodma idewait=50 i8042.nomux psmouse.proto=bare irqpoll pci=nommconf resume=/dev/disk/by-id/ata-OCZ-AGILITY3_OCZ-C2W254802B7757AF-part1 splash=silent quiet showopts Build Date: 06 November 2013 10:07:38AM Current version of pixman: 0.30.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 24 18:06:28 2013 (==) Using config directory: "/etc/X11/xorg.conf.d" (==) Using system config directory "/usr/share/X11/xorg.conf.d" (==) No Layout section. Using the first Screen section. (==) No screen section available. Using defaults. (**) |-->Screen "Default Screen Section" (0) (**) | |-->Monitor "<default monitor>" (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (==) Automatically adding GPU devices (WW) The directory "/usr/share/fonts/misc/sgi" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/misc:unscaled, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled, /usr/share/fonts/ghostscript/, /usr/share/fonts/cyrillic:unscaled, /usr/share/fonts/truetype/, built-ins (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules" (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (--) PCI:*(0:0:2:0) 8086:0042:1458:d000 rev 24, Mem @ 0xfb400000/4194304, 0xe0000000/268435456, I/O @ 0x0000ff00/8 Initializing built-in extension Generic Event Extension Initializing built-in extension SHAPE Initializing built-in extension MIT-SHM Initializing built-in extension XInputExtension Initializing built-in extension XTEST Initializing built-in extension BIG-REQUESTS Initializing built-in extension SYNC Initializing built-in extension XKEYBOARD Initializing built-in extension XC-MISC Initializing built-in extension SECURITY Initializing built-in extension XINERAMA Initializing built-in extension XFIXES Initializing built-in extension RENDER Initializing built-in extension RANDR Initializing built-in extension COMPOSITE Initializing built-in extension DAMAGE Initializing built-in extension MIT-SCREEN-SAVER Initializing built-in extension DOUBLE-BUFFER Initializing built-in extension RECORD Initializing built-in extension DPMS Initializing built-in extension X-Resource Initializing built-in extension XVideo Initializing built-in extension XVideo-MotionCompensation Initializing built-in extension XFree86-VidModeExtension Initializing built-in extension XFree86-DGA Initializing built-in extension XFree86-DRI Initializing built-in extension DRI2 (II) "glx" will be loaded by default. (II) Loading /usr/lib64/xorg/modules/libglamoregl.so (II) Module glamoregl: vendor="X.Org Foundation" compiled for 1.14.3, module version = 0.5.1 (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.14.3.901, module version = 1.0.0 (==) AIGLX enabled Loading extension GLX (==) Matched intel as autoconfigured driver 0 (==) Matched modesetting as autoconfigured driver 1 (==) Matched fbdev as autoconfigured driver 2 (==) Matched vesa as autoconfigured driver 3 (==) Assigned the driver to the xf86ConfigLayout (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.14.3, module version = 2.99.905 (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so (II) Module modesetting: vendor="X.Org Foundation" compiled for 1.14.3, module version = 0.8.0 (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so (II) Module fbdev: vendor="X.Org Foundation" compiled for 1.14.3, module version = 0.4.3 (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so (II) Module vesa: vendor="X.Org Foundation" compiled for 1.14.3, module version = 2.3.3 (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics, HD Graphics 2000, HD Graphics 3000, HD Graphics 2500, HD Graphics 4000, HD Graphics P4000, HD Graphics 4600, HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100, HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200 (II) modesetting: Driver for Modesetting Kernel Drivers: kms (II) FBDEV: driver for framebuffer: fbdev (II) VESA: driver for VESA chipsets: vesa (++) using VT number 7 WARNING: Error inserting i2c_algo_bit (/lib/modules/3.11.6-4-desktop/kernel/drivers/i2c/algos/i2c-algo-bit.ko): No such device WARNING: Error inserting drm (/lib/modules/3.11.6-4-desktop/kernel/drivers/gpu/drm/drm.ko): No such device WARNING: Error inserting drm_kms_helper (/lib/modules/3.11.6-4-desktop/kernel/drivers/gpu/drm/drm_kms_helper.ko): No such device FATAL: Error inserting i915 (/lib/modules/3.11.6-4-desktop/kernel/drivers/gpu/drm/i915/i915.ko): No such device (EE) open /dev/dri/card0: No such file or directory (WW) Falling back to old probe method for modesetting (EE) open /dev/dri/card0: No such file or directory (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so (II) Module fbdevhw: vendor="X.Org Foundation" compiled for 1.14.3.901, module version = 0.0.2 (**) FBDEV(1): claimed PCI slot 0@0:2:0 (II) FBDEV(1): using default device (WW) Falling back to old probe method for vesa (EE) Screen 0 deleted because of no matching config section. (II) FBDEV(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32 (==) FBDEV(0): RGB weight 888 (==) FBDEV(0): Default visual is TrueColor (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0) (II) FBDEV(0): hardware: VESA VGA (video memory: 7552kB) (II) FBDEV(0): checking modes against framebuffer device... (II) FBDEV(0): checking modes against monitor... (--) FBDEV(0): Virtual size is 1600x1200 (pitch 1600) (**) FBDEV(0): Built-in mode "current": 192.0 MHz, 94.5 kHz, 77.2 Hz (II) FBDEV(0): Modeline "current"x0.0 192.01 1600 1632 1832 2032 1200 1204 1208 1224 -hsync -vsync -csync (94.5 kHz b) (==) FBDEV(0): DPI set to (96, 96) (II) Loading /usr/lib64/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.14.3.901, module version = 1.0.0 (**) FBDEV(0): using shadow framebuffer (II) Loading /usr/lib64/xorg/modules/libshadow.so (II) Module shadow: vendor="X.Org Foundation" compiled for 1.14.3.901, module version = 1.1.0 (II) Unloading vesa (==) Depth 24 pixmap format is 32 bpp (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel) (==) FBDEV(0): Backing store disabled (==) FBDEV(0): DPMS enabled (==) RandR enabled (II) AIGLX: Screen 0 is not DRI2 capable (II) AIGLX: Screen 0 is not DRI capable (II) AIGLX: Loaded and initialized swrast (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/event1) (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall" (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall" (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.14.3, module version = 2.8.2 (II) Using input driver 'evdev' for 'Logitech USB Laser Mouse' (**) Logitech USB Laser Mouse: always reports core events (**) evdev: Logitech USB Laser Mouse: Device: "/dev/input/event1" (--) evdev: Logitech USB Laser Mouse: Vendor 0x46d Product 0xc062 (--) evdev: Logitech USB Laser Mouse: Found 12 mouse buttons (--) evdev: Logitech USB Laser Mouse: Found scroll wheel(s) (--) evdev: Logitech USB Laser Mouse: Found relative axes (--) evdev: Logitech USB Laser Mouse: Found x and y relative axes (II) evdev: Logitech USB Laser Mouse: Configuring as mouse (II) evdev: Logitech USB Laser Mouse: Adding scrollwheel support (**) evdev: Logitech USB Laser Mouse: YAxisMapping: buttons 4 and 5 (**) evdev: Logitech USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB Laser Mouse" (type: MOUSE, id 6) (II) evdev: Logitech USB Laser Mouse: initialized for relative axes. (**) Logitech USB Laser Mouse: (accel) keeping acceleration scheme 1 (**) Logitech USB Laser Mouse: (accel) acceleration profile 0 (**) Logitech USB Laser Mouse: (accel) acceleration factor: 2.000 (**) Logitech USB Laser Mouse: (accel) acceleration threshold: 4 (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/mouse0) (II) No input driver specified, ignoring this device. (II) This device may have been added with another device file. (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard" (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' (**) AT Translated Set 2 keyboard: always reports core events (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 (--) evdev: AT Translated Set 2 keyboard: Found keys (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 7) The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols > Ignoring extra symbols Errors from xkbcomp are not fatal to the X server (II) config/udev: Adding input device PC Speaker (/dev/input/event2) (II) No input driver specified, ignoring this device. (II) This device may have been added with another device file. (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel) The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Compat map for group 2 redefined > Using new definition > Warning: Compat map for group 3 redefined > Using new definition > Warning: Compat map for group 4 redefined > Using new definition Errors from xkbcomp are not fatal to the X server The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols > Ignoring extra symbols Errors from xkbcomp are not fatal to the X server The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols > Ignoring extra symbols Errors from xkbcomp are not fatal to the X server The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols > Ignoring extra symbols Errors from xkbcomp are not fatal to the X server The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Compat map for group 2 redefined > Using new definition > Warning: Compat map for group 3 redefined > Using new definition > Warning: Compat map for group 4 redefined > Using new definition Errors from xkbcomp are not fatal to the X server The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Compat map for group 2 redefined > Using new definition > Warning: Compat map for group 3 redefined > Using new definition > Warning: Compat map for group 4 redefined > Using new definition Errors from xkbcomp are not fatal to the X server The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Compat map for group 2 redefined > Using new definition > Warning: Compat map for group 3 redefined > Using new definition > Warning: Compat map for group 4 redefined > Using new definition Errors from xkbcomp are not fatal to the X server The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Compat map for group 2 redefined > Using new definition > Warning: Compat map for group 3 redefined > Using new definition > Warning: Compat map for group 4 redefined > Using new definition Errors from xkbcomp are not fatal to the X server The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Compat map for group 2 redefined > Using new definition > Warning: Compat map for group 3 redefined > Using new definition > Warning: Compat map for group 4 redefined > Using new definition Errors from xkbcomp are not fatal to the X server The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Compat map for group 2 redefined > Using new definition > Warning: Compat map for group 3 redefined > Using new definition > Warning: Compat map for group 4 redefined > Using new definition Errors from xkbcomp are not fatal to the X server The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Compat map for group 2 redefined > Using new definition > Warning: Compat map for group 3 redefined > Using new definition > Warning: Compat map for group 4 redefined > Using new definition Errors from xkbcomp are not fatal to the X server The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols > Ignoring extra symbols Errors from xkbcomp are not fatal to the X server The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols > Ignoring extra symbols Errors from xkbcomp are not fatal to the X server The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Compat map for group 2 redefined > Using new definition > Warning: Compat map for group 3 redefined > Using new definition > Warning: Compat map for group 4 redefined > Using new definition Errors from xkbcomp are not fatal to the X server The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Compat map for group 2 redefined > Using new definition > Warning: Compat map for group 3 redefined > Using new definition > Warning: Compat map for group 4 redefined > Using new definition Errors from xkbcomp are not fatal to the X server (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel) (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel) (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel) (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel) (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by vesafb of Linux Kernel) ############ had no problems with Opensuse 12.3 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=852440 https://bugzilla.novell.com/show_bug.cgi?id=852440#c Stefan Dirsch <sndirsch@suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Priority|P5 - None |P3 - Medium Status|NEW |ASSIGNED AssignedTo|bnc-team-xorg-bugs@forge.pr |xorg-maintainer-bugs@forge. |ovo.novell.com |provo.novell.com -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=852440 https://bugzilla.novell.com/show_bug.cgi?id=852440#c1 Stefan Dirsch <sndirsch@suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO InfoProvider| |t.bark@gmx.de --- Comment #1 from Stefan Dirsch <sndirsch@suse.com> 2013-11-27 13:58:47 UTC ---
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.6-4-desktop root=UUID=c19fab8d-bfa5-4924-85d6-ffa40e6934a9 apm=off acpi=off mce=off barrier=off ide=nodma idewait=50 i8042.nomux psmouse.proto=bare irqpoll pci=nommconf resume=/dev/disk/by-id/ata-OCZ-AGILITY3_OCZ-C2W254802B7757AF-part1 splash=silent quiet showopts
Did you boot in failsafe mode? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=852440 https://bugzilla.novell.com/show_bug.cgi?id=852440#c2 Thomas Bark <t.bark@gmx.de> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED CC| |t.bark@gmx.de InfoProvider|t.bark@gmx.de | --- Comment #2 from Thomas Bark <t.bark@gmx.de> 2013-11-27 18:56:02 UTC --- No, I used normal boot. The above options are from /boot/grub2/grub.cfg But the opensuse13.1 installation itself was only possible in failsafe mode! Here the corresponding entries from grub.cfg: ### BEGIN /etc/grub.d/10_linux ### menuentry 'openSUSE 13.1' --class 'opensuse-13-1' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-c19fab8d-bfa5-4924-85d6-ffa40e6934a9' { load_video set gfxpayload=keep insmod gzio insmod part_msdos insmod ext2 set root='hd1,msdos2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint='hd1,msdos2' c19fab8d-bfa5-4924-85d6-ffa40e6934a9 else search --no-floppy --fs-uuid --set=root c19fab8d-bfa5-4924-85d6-ffa40e6934a9 fi echo 'Linux 3.11.6-4-desktop wird geladen …' linux /boot/vmlinuz-3.11.6-4-desktop root=UUID=c19fab8d-bfa5-4924-85d6-ffa40e6934a9 apm=off acpi=off mce=off barrier=off ide=nodma idewait=50 i8042.nomux psmouse.proto=bare irqpoll pci=nommconf resume=/dev/disk/by-id/ata-OCZ-AGILITY3_OCZ-C2W254802B7757AF-part1 splash=silent quiet showopts echo 'Initiale Ramdisk wird geladen …' initrd /boot/initrd-3.11.6-4-desktop } submenu 'Erweiterte Optionen für openSUSE 13.1' $menuentry_id_option 'gnulinux-advanced-c19fab8d-bfa5-4924-85d6-ffa40e6934a9' { menuentry 'openSUSE 13.1, mit Linux 3.11.6-4-desktop' --class 'opensuse-13-1' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.6-4-desktop-advanced-c19fab8d-bfa5-4924-85d6-ffa40e6934a9' { load_video set gfxpayload=keep insmod gzio insmod part_msdos insmod ext2 set root='hd1,msdos2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint='hd1,msdos2' c19fab8d-bfa5-4924-85d6-ffa40e6934a9 else search --no-floppy --fs-uuid --set=root c19fab8d-bfa5-4924-85d6-ffa40e6934a9 fi echo 'Linux 3.11.6-4-desktop wird geladen …' linux /boot/vmlinuz-3.11.6-4-desktop root=UUID=c19fab8d-bfa5-4924-85d6-ffa40e6934a9 apm=off acpi=off mce=off barrier=off ide=nodma idewait=50 i8042.nomux psmouse.proto=bare irqpoll pci=nommconf resume=/dev/disk/by-id/ata-OCZ-AGILITY3_OCZ-C2W254802B7757AF-part1 splash=silent quiet showopts echo 'Initiale Ramdisk wird geladen …' initrd /boot/initrd-3.11.6-4-desktop } menuentry 'openSUSE 13.1, mit Linux 3.11.6-4-desktop (Wiederherstellungsmodus)' --class 'opensuse-13-1' --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.6-4-desktop-recovery-c19fab8d-bfa5-4924-85d6-ffa40e6934a9' { load_video set gfxpayload=keep insmod gzio insmod part_msdos insmod ext2 set root='hd1,msdos2' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint='hd1,msdos2' c19fab8d-bfa5-4924-85d6-ffa40e6934a9 else search --no-floppy --fs-uuid --set=root c19fab8d-bfa5-4924-85d6-ffa40e6934a9 fi echo 'Linux 3.11.6-4-desktop wird geladen …' linux /boot/vmlinuz-3.11.6-4-desktop root=UUID=c19fab8d-bfa5-4924-85d6-ffa40e6934a9 showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe echo 'Initiale Ramdisk wird geladen …' initrd /boot/initrd-3.11.6-4-desktop } } ### END /etc/grub.d/10_linux ### -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=852440 https://bugzilla.novell.com/show_bug.cgi?id=852440#c3 --- Comment #3 from Thomas Bark <t.bark@gmx.de> 2013-11-27 19:14:24 UTC --- I added a new grub config: [ 23.142] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.6-4-desktop root=UUID=c19fab8d-bfa5-4924-85d6-ffa40e6934a9 idewait=50 i8042.nomux psmouse.proto=bare irqpoll pci=nommconf resume=/dev/disk/by-id/ata-OCZ-AGILITY3_OCZ-C2W254802B7757AF-part1 splash=silent quiet showopts [ 23.142] Build Date: 06 November 2013 10:07:38AM With these options I have the intel gpu driver loaded and at least 1920x1200 resolution with dual-link dvi. I will try display port next. So these failsafe kernel settings are used, because I made the installation with failsafe boot? That's really bad indeed. Where do I get fast settings from (I dont have a 12.3 backup). -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=852440 https://bugzilla.novell.com/show_bug.cgi?id=852440#c4 --- Comment #4 from Thomas Bark <t.bark@gmx.de> 2013-11-29 18:44:28 UTC --- With display port the native solution of 2560x1440 is possible again. One question os still open: Why is no installation possible with the standard kernel options? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
participants (1)
-
bugzilla_noreply＠novell.com