[Bug 725701] New: speaker-test Can Not Produce Sound on openSUSE 12.1 RC 1, Except on YaST Sound
https://bugzilla.novell.com/show_bug.cgi?id=725701 https://bugzilla.novell.com/show_bug.cgi?id=725701#c0 Summary: speaker-test Can Not Produce Sound on openSUSE 12.1 RC 1, Except on YaST Sound Classification: openSUSE Product: openSUSE 12.1 Version: Factory Platform: x86-64 OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Sound AssignedTo: tiwai@suse.com ReportedBy: andisugandi@opensuse.org QAContact: qa@suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:7.0.1) Gecko/20100101 Firefox/7.0.1 On ASUS EEEPC 1201T: http://www.asus.com/product.aspx?P_ID=ls15lhnDPup9y6Uh # lspci | grep Audio 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) as told on the openSUSE Audio Troubleshooting Wiki page: http://en.opensuse.org/SDB:Audio_troubleshooting both speaker-test commands do not produce sound: # speaker-test -Dplug:front -c2 -l5 -twav speaker-test 1.0.24.2 Playback device is plug:front Stream parameters are 48000Hz, S16_LE, 2 channels WAV file(s) ALSA lib conf.c:3700:(snd_config_update_r) Cannot access file /etc/alsa-pulse.conf ALSA lib pcm.c:2212:(snd_pcm_open_noupdate) Unknown PCM plug:front Playback open error: -2,No such file or directory # speaker-test -c2 -l5 -twav speaker-test 1.0.24.2 Playback device is default Stream parameters are 48000Hz, S16_LE, 2 channels WAV file(s) ALSA lib conf.c:3700:(snd_config_update_r) Cannot access file /etc/alsa-pulse.conf ALSA lib pcm.c:2212:(snd_pcm_open_noupdate) Unknown PCM default Playback open error: -2,No such file or directory
rpm -qa alsa\* alsa-utils-1.0.24.2-11.1.x86_64 alsa-firmware-1.0.24.1-6.1.noarch alsa-oss-1.0.17-36.1.x86_64 alsa-plugins-samplerate-1.0.24-17.1.x86_64 alsa-1.0.24.1-22.1.x86_64 alsa-plugins-pulse-32bit-1.0.24-17.1.x86_64 alsamixergui-0.9.0rc1-754.1.x86_64 alsa-plugins-samplerate-32bit-1.0.24-17.1.x86_64 alsa-plugins-1.0.24-17.1.x86_64
cat /etc/SuSE-release openSUSE 12.1 RC 1 (x86_64) VERSION = 12.1 CODENAME = Asparagus
Although 'yast sound' (YaST > Hardware > Sound: Other > Play Test Sound) can play a sound, but in "Other > Volume", there are no channels appeared. [P0] https://picasaweb.google.com/lh/photo/8SWnDeFCMn1jprfp4hU1Rg Also, in GNOME System Settings > Sound: Hardware , there are no hardware (s) listed. [P1] https://picasaweb.google.com/lh/photo/3xWRwNSMi3B7kAsO8wGi6Q I also try to include my current user into 'audio' group as it was using openSUSE 11.3 Milestone (KDE4), but it is not working too. http://lists.opensuse.org/opensuse-kde/2010-04/msg00186.html Reproducible: Always Steps to Reproduce: 1. Running openSUSE Factory (right now 12.1 RC1) 2. Running "speaker-test -Dplug:front -c2 -l5 -twav" or "speaker-test -c2 -l5 -twav" on terminal 3. Actual Results: There is no sound Expected Results: It plays sound These are other related tests: # alsaconf [P2] https://picasaweb.google.com/lh/photo/SPUhTlUbpqcfK8To7CJXvg # alsamixergui [P3] https://picasaweb.google.com/lh/photo/I8lbqbpXHX_y5RjfCW_jew Last step is to upgrade alsa related packages to multimedia:libs and install alsa-driver-kmp-desktop from multimedia:audio:KMP, but the desktop still can not produce the sound. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=725701 https://bugzilla.novell.com/show_bug.cgi?id=725701#c1 --- Comment #1 from Andi Sugandi <andisugandi@opensuse.org> 2011-10-21 08:54:45 UTC --- Created an attachment (id=458126) --> (http://bugzilla.novell.com/attachment.cgi?id=458126) [P0] YaST > Hardware > Sound: Other > Volume -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=725701 https://bugzilla.novell.com/show_bug.cgi?id=725701#c2 --- Comment #2 from Andi Sugandi <andisugandi@opensuse.org> 2011-10-21 08:56:12 UTC --- Created an attachment (id=458127) --> (http://bugzilla.novell.com/attachment.cgi?id=458127) [P1] GNOME System Settings > Sound: Hardware -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=725701 https://bugzilla.novell.com/show_bug.cgi?id=725701#c3 --- Comment #3 from Andi Sugandi <andisugandi@opensuse.org> 2011-10-21 08:57:11 UTC --- Created an attachment (id=458128) --> (http://bugzilla.novell.com/attachment.cgi?id=458128) [P2] Running 'alsaconf' -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=725701 https://bugzilla.novell.com/show_bug.cgi?id=725701#c4 --- Comment #4 from Andi Sugandi <andisugandi@opensuse.org> 2011-10-21 08:58:22 UTC --- Created an attachment (id=458130) --> (http://bugzilla.novell.com/attachment.cgi?id=458130) [P3] Running 'alsamixergui' -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=725701 https://bugzilla.novell.com/show_bug.cgi?id=725701#c5 --- Comment #5 from Takashi Iwai <tiwai@suse.com> 2011-10-21 09:02:54 UTC --- Try to install alsa-plugins-pulse.rpm. It seems missing by some reason... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=725701 https://bugzilla.novell.com/show_bug.cgi?id=725701#c Takashi Iwai <tiwai@suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO InfoProvider| |andisugandi@opensuse.org -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=725701 https://bugzilla.novell.com/show_bug.cgi?id=725701#c6 --- Comment #6 from Andi Sugandi <andisugandi@opensuse.org> 2011-10-21 09:03:28 UTC --- Created an attachment (id=458133) --> (http://bugzilla.novell.com/attachment.cgi?id=458133) Generated file after running '/usr/sbin/alsa-info.sh' -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=725701 https://bugzilla.novell.com/show_bug.cgi?id=725701#c7 Andi Sugandi <andisugandi@opensuse.org> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW InfoProvider|andisugandi@opensuse.org | --- Comment #7 from Andi Sugandi <andisugandi@opensuse.org> 2011-10-21 10:00:28 UTC --- (In reply to comment #5)
Try to install alsa-plugins-pulse.rpm. It seems missing by some reason...
Yes, installing 'alsa-plugins-pulse' (alsa-plugins-pulse-1.0.24-17.1.x86_64) solves the problem:
speaker-test -Dplug:front -c2 -l5 -twav
speaker-test 1.0.24.2 Playback device is plug:front Stream parameters are 48000Hz, S16_LE, 2 channels WAV file(s) Rate set to 48000Hz (requested 48000Hz) Buffer size range from 64 to 262144 Period size range from 32 to 131072 Using max buffer size 262144 Periods = 4 was set period_size = 65536 was set buffer_size = 262144 0 - Front Left 1 - Front Right Time per period = 5.514669 0 - Front Left 1 - Front Right Time per period = 5.491841 0 - Front Left 1 - Front Right ^C
speaker-test -c2 -l5 -twav
speaker-test 1.0.24.2 Playback device is default Stream parameters are 48000Hz, S16_LE, 2 channels WAV file(s) Rate set to 48000Hz (requested 48000Hz) Buffer size range from 96 to 1048576 Period size range from 32 to 349526 Using max buffer size 1048576 Periods = 4 was set period_size = 262144 was set buffer_size = 1048576 0 - Front Left 1 - Front Right Time per period = 5.440761 0 - Front Left 1 - Front Right Time per period = 5.430234 0 - Front Left 1 - Front Right ^C Is it packaging issue? I hope it won't happen again in the feature. Thanks. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=725701 https://bugzilla.novell.com/show_bug.cgi?id=725701#c8 Takashi Iwai <tiwai@suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO InfoProvider| |andisugandi@opensuse.org --- Comment #8 from Takashi Iwai <tiwai@suse.com> 2011-10-21 10:04:29 UTC --- How did you install the whole packages? Just selecting some pattern? pulseaudio package has a Recommends tag to alsa-plugins-pulse, so usually it's automatically picked up. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=725701 https://bugzilla.novell.com/show_bug.cgi?id=725701#c9 Andi Sugandi <andisugandi@opensuse.org> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW InfoProvider|andisugandi@opensuse.org | --- Comment #9 from Andi Sugandi <andisugandi@opensuse.org> 2011-10-22 02:40:33 UTC --- (In reply to comment #8)
How did you install the whole packages? Just selecting some pattern? pulseaudio package has a Recommends tag to alsa-plugins-pulse, so usually it's automatically picked up.
[1.] For the first time, it was openSUSE 11.4 (KDE4 Live CD installation) and then upgraded to Factory repositories (oss & non-oss) after disabling all openSUSE 11.4 repositories. [2.] When GNOME 3.2 is out, I manually remove all KDE packages (both on kde4 and kde4_basis patterns) and install GNOME 3.2 packages (gnome & gnome_basis patterns) trough 'yast sw_single' because i see zypper does not yet support removing packages based on pattern. [3.] So, I realize now that doing [2.] will also removing 'alsa-plugins-pulse'. [4.] Is it doing [2.] also making pulseaudio to be removed automatically? If so, is it more secure to force keeping or strongly required pulseaudio if one of desktop environment/DE is going to be removed and then user wants to install the other one so this issue will never happen again? Which pattern alsa exist now? Is it also good way to move pulseaudio and alsa-plugins-pulse packages into the same pattern as other alsa packages does? So user that wants to change its DE (and wants to remove the other one to save space) can get it without breaking the base packages (ex: sound/audio backend/userspace packages). Thanks. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=725701 https://bugzilla.novell.com/show_bug.cgi?id=725701#c10 Graham Davis <hacker@scarlet-jade.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |hacker@scarlet-jade.com --- Comment #10 from Graham Davis <hacker@scarlet-jade.com> 2011-11-04 13:13:51 UTC --- I also have no sound on my Azalea system with PulseAudio enabled. Sound returns when it is disabled. Having said that, If I log on as root, the sound is OK with PulseAudio enabled. Previously, on a new install for 11.4, I've logged in as root to change the master channel in kmix to "master front." This cured the silence for other users. This procedure is not possible as a user because the kmix menu is different. In 12.1 RC2, the master channel is now "master" so there is nothing to change and hence, my old fix is not available to me. This is on 12.1 RC2 with KDE 4.7.2. As to alsa-plugins-pulse, that was installed automatically. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=725701 https://bugzilla.novell.com/show_bug.cgi?id=725701#c11 G Y <gy3544@yahoo.fr> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |gy3544@yahoo.fr --- Comment #11 from G Y <gy3544@yahoo.fr> 2011-11-09 13:36:39 UTC --- Hello, I have no sound except on test audio in yast in user profile. In root profile, I have sound. alsa-plugin-pulse-rpm is installed and pulse audio enabled. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=725701 https://bugzilla.novell.com/show_bug.cgi?id=725701#c12 --- Comment #12 from G Y <gy3544@yahoo.fr> 2011-11-09 13:37:40 UTC --- I have 12.1 rc2 x86_64 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=725701 https://bugzilla.novell.com/show_bug.cgi?id=725701#c13 Javier Llorente <javier@opensuse.org> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |javier@opensuse.org Severity|Normal |Critical --- Comment #13 from Javier Llorente <javier@opensuse.org> 2011-11-27 00:13:16 UTC --- I have recently upgraded a netbook (which has a HDA ATI SB) from 11.4 to 12.1 (final). Sound worked on 11.4 but it doesn't on 12.1. Nevertheless, it works on the KDE Live CD based on 12.1. I have also tried creating a new user in order to have a clean ~/.kde4, but it had no effect. No sound. alsa-1.0.24.1-23.1.2.x86_64 alsa-firmware-1.0.24.1-7.1.1.noarch alsa-plugins-pulse-32bit-1.0.24-18.1.2.x86_64 alsa-plugins-1.0.24-18.1.2.x86_64 alsa-plugins-pulse-1.0.24-18.1.2.x86_64 alsa-plugins-32bit-1.0.24-18.1.2.x86_64 alsa-utils-1.0.24.2-12.8.1.x86_64 output of speaker-test -Dplug:front -c2 -l5 -twav speaker-test 1.0.24.2 Playback device is plug:front Stream parameters are 48000Hz, S16_LE, 2 channels WAV file(s) Playback open error: -2,No such file or director upload=true&script=true&cardinfo= !!################################ !!ALSA Information Script v 0.4.60 !!################################ !!Script ran on: Sun Nov 27 00:03:00 UTC 2011 !!Linux Distribution !!------------------ Welcome to openSUSE 12.1 "Asparagus" - Kernel \r (\l). openSUSE 12.1 (x86_64) NAME=openSUSE PRETTY_NAME="openSUSE 12.1 (Asparagus) (x86_64)" ID=opensuse !!DMI Information !!--------------- Manufacturer: Hewlett-Packard Product Name: HP Pavilion dm1 Notebook PC Product Version: 0589100000252B00000320100 !!Kernel Information !!------------------ Kernel release: 3.1.0-1.2-desktop Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.24 Library version: Utilities version: 1.0.24.2 !!Loaded ALSA modules !!------------------- snd_hda_intel snd_hda_intel !!Sound Servers on this system !!---------------------------- Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes ESound Daemon: Installed - Yes (/usr/bin/esd) Running - No !!Soundcards recognised by ALSA !!----------------------------- 0 [Generic ]: HDA-Intel - HD-Audio Generic HD-Audio Generic at 0xd0244000 irq 42 1 [SB ]: HDA-Intel - HDA ATI SB HDA ATI SB at 0xd0240000 irq 16 !!PCI Soundcards installed in the system !!-------------------------------------- 00:01.1 Audio device: ATI Technologies Inc Wrestler HDMI Audio [Radeon HD 6250/6310] 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!-------------------------------------------------------- 00:01.1 0403: 1002:1314 Subsystem: 103c:1611 -- 00:14.2 0403: 1002:4383 (rev 40) Subsystem: 103c:1611 !!Loaded sound module options !!-------------------------- !!Module: snd_hda_intel bdl_pos_adj : 32,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 beep_mode : 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : -1 id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 single_cmd : N !!Module: snd_hda_intel bdl_pos_adj : 32,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 beep_mode : 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : -1 id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 single_cmd : N !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: ATI R6xx HDMI Address: 0 AFG Function Id: 0x1 (unsol 0) Vendor Id: 0x1002aa01 Subsystem Id: 0x00aa0100 Revision Id: 0x100200 No Modem Function Group found Default PCM: rates [0x70]: 32000 44100 48000 bits [0x2]: 16 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x02 [Audio Output] wcaps 0x201: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 Node 0x03 [Pin Complex] wcaps 0x400381: Stereo Digital Control: name="IEC958 Playback Con Mask", index=0, device=0 Control: name="IEC958 Playback Pro Mask", index=0, device=0 Control: name="IEC958 Playback Default", index=0, device=0 Control: name="IEC958 Playback Switch", index=0, device=0 Pincap 0x00000094: OUT Detect HDMI Pin Default 0x18560010: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=03, enabled=1 Connection: 1 0x02 Codec: IDT 92HD81B1X5 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x111d7605 Subsystem Id: 0x103c1611 Revision Id: 0x100105 No Modem Function Group found Default PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1 GPIO: io=3, o=0, i=0, unsolicited=1, wake=1 IO[0]: enable=1, dir=1, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Power-Map: 0x00 Node 0x0a [Pin Complex] wcaps 0x400583: Stereo Amp-In Amp-In caps: N/A Amp-In vals: [0x00 0x00] Pincap 0x0001173c: IN OUT HP EAPD Detect Vref caps: HIZ 50 GRD 80 EAPD 0x2: EAPD Pin Default 0x40f000f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x00: VREF_HIZ Unsolicited: tag=00, enabled=0 Power: setting=D0, actual=D0 Connection: 3 0x13* 0x14 0x1c Node 0x0b [Pin Complex] wcaps 0x400581: Stereo Pincap 0x0001001c: OUT HP EAPD Detect EAPD 0x2: EAPD Pin Default 0x0421201f: [Jack] HP Out at Ext Right Conn = 1/8, Color = Grey DefAssociation = 0x1, Sequence = 0xf Pin-ctls: 0x40: OUT Unsolicited: tag=01, enabled=1 Power: setting=D0, actual=D0 Connection: 3 0x13 0x14* 0x1c Node 0x0c [Pin Complex] wcaps 0x400583: Stereo Amp-In Control: name="Mic Jack Mode", index=0, device=0 ControlAmp: chs=0, dir=In, idx=0, ofs=0 Control: name="Mic Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: N/A Amp-In vals: [0x03 0x03] Pincap 0x00011734: IN OUT EAPD Detect Vref caps: HIZ 50 GRD 80 EAPD 0x2: EAPD Pin Default 0x04a12040: [Jack] Mic at Ext Right Conn = 1/8, Color = Grey DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=02, enabled=1 Power: setting=D0, actual=D0 Connection: 3 0x13* 0x14 0x1c Node 0x0d [Pin Complex] wcaps 0x400501: Stereo Pincap 0x00010050: OUT EAPD Balanced EAPD 0x2: EAPD Pin Default 0x90170110: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power: setting=D0, actual=D0 Connection: 3 0x13* 0x14 0x1c Node 0x0e [Pin Complex] wcaps 0x400583: Stereo Amp-In Amp-In caps: N/A Amp-In vals: [0x00 0x00] Pincap 0x00010034: IN OUT EAPD Detect EAPD 0x2: EAPD Pin Default 0x40f000f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power: setting=D0, actual=D0 Connection: 3 0x13 0x14* 0x1c Node 0x0f [Pin Complex] wcaps 0x400583: Stereo Amp-In Amp-In caps: N/A Amp-In vals: [0x00 0x00] Pincap 0x00010034: IN OUT EAPD Detect EAPD 0x2: EAPD Pin Default 0x40f000f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power: setting=D0, actual=D0 Connection: 3 0x13 0x14* 0x1c Node 0x10 [Pin Complex] wcaps 0x400500: Mono Pincap 0x00000010: OUT Pin Default 0x40f000f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x00: Power: setting=D0, actual=D0 Connection: 1 0x1a Node 0x11 [Pin Complex] wcaps 0x400483: Stereo Amp-In Control: name="Internal Mic Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: N/A Amp-In vals: [0x00 0x00] Pincap 0x00000024: IN Detect Pin Default 0xd5a30150: [Both] Mic at Int Top Conn = ATAPI, Color = Unknown DefAssociation = 0x5, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Power: setting=D0, actual=D0 Node 0x12 [Vendor Defined Widget] wcaps 0xf00503: Stereo Amp-In Amp-In caps: N/A Amp-In vals: [0x00 0x00] Power: setting=D0, actual=D0 Connection: 1 0x20 Node 0x13 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=63 Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="STAC92xx Analog", type="Audio", device=0 Amp-Out caps: N/A Amp-Out vals: [0x6f 0x6f] Converter: stream=0, channel=0 Power: setting=D0, actual=D0 Delay: 13 samples Node 0x14 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=63 Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: N/A Amp-Out vals: [0x6f 0x6f] Converter: stream=0, channel=0 Power: setting=D0, actual=D0 Delay: 13 samples Node 0x15 [Audio Input] wcaps 0x1d0541: Stereo Device: name="STAC92xx Analog", type="Audio", device=0 Converter: stream=0, channel=0 SDI-Select: 0 Power: setting=D0, actual=D0 Delay: 13 samples Connection: 1 0x17 Processing caps: benign=0, ncoeff=0 Node 0x16 [Audio Input] wcaps 0x1d0541: Stereo Converter: stream=0, channel=0 SDI-Select: 0 Power: setting=D0, actual=D0 Delay: 13 samples Connection: 1 0x18 Processing caps: benign=0, ncoeff=0 Node 0x17 [Audio Selector] wcaps 0x300d0d: Stereo Amp-Out R/L Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Power: setting=D0, actual=D0 Connection: 7 0x0c 0x0e 0x0f 0x1b 0x11* 0x12 0x0a Node 0x18 [Audio Selector] wcaps 0x300d0d: Stereo Amp-Out R/L Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Power: setting=D0, actual=D0 Connection: 7 0x0c* 0x0e 0x0f 0x1b 0x11 0x12 0x0a Node 0x19 [Audio Selector] wcaps 0x300501: Stereo Power: setting=D0, actual=D0 Connection: 3 0x13* 0x14 0x1c Node 0x1a [Audio Mixer] wcaps 0x200500: Mono Power: setting=D0, actual=D0 Connection: 1 0x19 Node 0x1b [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] Power: setting=D0, actual=D0 Connection: 6 0x0c 0x0e 0x0f 0x13 0x14 0x0a Node 0x1c [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x9f 0x9f] Power: setting=D0, actual=D0 Connection: 1 0x1b Node 0x1d [Audio Output] wcaps 0x4061d: Stereo Digital Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power: setting=D0, actual=D0 Delay: 4 samples Node 0x1e [Audio Output] wcaps 0x4061d: Stereo Digital Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power: setting=D0, actual=D0 Delay: 4 samples Node 0x1f [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x40f000f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power: setting=D0, actual=D0 Connection: 1 0x1d Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000034: IN OUT Detect Pin Default 0x40f000f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power: setting=D0, actual=D0 Connection: 1 0x1e Node 0x21 [Beep Generator Widget] wcaps 0x70040c: Mono Amp-Out Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="Beep Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1 Amp-Out vals: [0x00] Power: setting=D0, actual=D0 Node 0x22 [Vendor Defined Widget] wcaps 0xf00000: Mono --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw---- 1 root audio 116, 4 Nov 27 01:01 /dev/snd/controlC0 crw-rw---- 1 root audio 116, 8 Nov 27 01:01 /dev/snd/controlC1 crw-rw---- 1 root audio 116, 3 Nov 27 01:01 /dev/snd/hwC0D0 crw-rw---- 1 root audio 116, 7 Nov 27 01:01 /dev/snd/hwC1D0 crw-rw---- 1 root audio 116, 2 Nov 27 01:01 /dev/snd/pcmC0D3p crw-rw---- 1 root audio 116, 6 Nov 27 01:01 /dev/snd/pcmC1D0c crw-rw---- 1 root audio 116, 5 Nov 27 01:01 /dev/snd/pcmC1D0p crw-rw---- 1 root audio 116, 1 Nov 27 01:01 /dev/snd/seq crw-rw---- 1 root audio 116, 33 Nov 27 01:01 /dev/snd/timer /dev/snd/by-path: total 0 drwxr-xr-x 2 root root 80 Nov 27 01:01 . drwxr-xr-x 3 root root 240 Nov 27 01:01 .. lrwxrwxrwx 1 root root 12 Nov 27 01:01 pci-0000:00:01.1 -> ../controlC0 lrwxrwxrwx 1 root root 12 Nov 27 01:01 pci-0000:00:14.2 -> ../controlC1 !!Aplay/Arecord output !!------------ APLAY **** List of PLAYBACK Hardware Devices **** card 0: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: SB [HDA ATI SB], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 ARECORD **** List of CAPTURE Hardware Devices **** card 1: SB [HDA ATI SB], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 !!Amixer output !!------------- !!-------Mixer controls for card 0 [Generic] Card hw:0 'Generic'/'HD-Audio Generic at 0xd0244000 irq 42' Mixer name : 'ATI R6xx HDMI' Components : 'HDA:1002aa01,00aa0100,00100200' Controls : 4 Simple ctrls : 1 Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] !!-------Mixer controls for card 1 [SB] Card hw:1 'SB'/'HDA ATI SB at 0xd0240000 irq 16' Mixer name : 'IDT 92HD81B1X5' Components : 'HDA:111d7605,103c1611,00100105' Controls : 14 Simple ctrls : 9 Simple mixer control 'Master',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum Playback channels: Mono Limits: Playback 0 - 64 Mono: Playback 64 [100%] [0.00dB] [on] Simple mixer control 'Headphone',0 Capabilities: pvolume pswitch penum Playback channels: Front Left - Front Right Limits: Playback 0 - 64 Mono: Front Left: Playback 48 [75%] [-12.00dB] [on] Front Right: Playback 48 [75%] [-12.00dB] [on] Simple mixer control 'Speaker',0 Capabilities: pvolume pswitch penum Playback channels: Front Left - Front Right Limits: Playback 0 - 64 Mono: Front Left: Playback 48 [75%] [-12.00dB] [on] Front Right: Playback 48 [75%] [-12.00dB] [on] Simple mixer control 'PCM',0 Capabilities: pvolume penum Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 255 [100%] [0.00dB] Front Right: Playback 255 [100%] [0.00dB] Simple mixer control 'Mic',0 Capabilities: cvolume penum Capture channels: Front Left - Front Right Limits: Capture 0 - 3 Front Left: Capture 3 [100%] [30.00dB] Front Right: Capture 3 [100%] [30.00dB] Simple mixer control 'Mic Jack Mode',0 Capabilities: enum Items: 'Mic In' 'Line In' Item0: 'Mic In' Simple mixer control 'Beep',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum Playback channels: Mono Limits: Playback 0 - 3 Mono: Playback 1 [33%] [-12.00dB] [on] Simple mixer control 'Capture',0 Capabilities: cvolume cswitch penum Capture channels: Front Left - Front Right Limits: Capture 0 - 15 Front Left: Capture 0 [0%] [0.00dB] [off] Front Right: Capture 0 [0%] [0.00dB] [off] Simple mixer control 'Internal Mic',0 Capabilities: cvolume penum Capture channels: Front Left - Front Right Limits: Capture 0 - 3 Front Left: Capture 0 [0%] [0.00dB] Front Right: Capture 0 [0%] [0.00dB] !!Alsactl output !!------------- --startcollapse-- state.Generic { control.1 { iface MIXER name 'IEC958 Playback Con Mask' value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.2 { iface MIXER name 'IEC958 Playback Pro Mask' value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.3 { iface MIXER name 'IEC958 Playback Default' value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.4 { iface MIXER name 'IEC958 Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } } state.SB { control.1 { iface MIXER name 'Speaker Playback Volume' value.0 48 value.1 48 comment { access 'read write' type INTEGER count 2 range '0 - 64' dbmin -4800 dbmax 0 dbvalue.0 -1200 dbvalue.1 -1200 } } control.2 { iface MIXER name 'Speaker Playback Switch' value.0 true value.1 true comment { access 'read write' type BOOLEAN count 2 } } control.3 { iface MIXER name 'Mic Jack Mode' value 'Mic In' comment { access 'read write' type ENUMERATED count 1 item.0 'Mic In' item.1 'Line In' } } control.4 { iface MIXER name 'Beep Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.5 { iface MIXER name 'Beep Playback Volume' value 1 comment { access 'read write' type INTEGER count 1 range '0 - 3' dbmin -1800 dbmax 0 dbvalue.0 -1200 } } control.6 { iface MIXER name 'Headphone Playback Volume' value.0 48 value.1 48 comment { access 'read write' type INTEGER count 2 range '0 - 64' dbmin -4800 dbmax 0 dbvalue.0 -1200 dbvalue.1 -1200 } } control.7 { iface MIXER name 'Headphone Playback Switch' value.0 true value.1 true comment { access 'read write' type BOOLEAN count 2 } } control.8 { iface MIXER name 'Capture Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 15' dbmin 0 dbmax 2250 dbvalue.0 0 dbvalue.1 0 } } control.9 { iface MIXER name 'Capture Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.10 { iface MIXER name 'Mic Capture Volume' value.0 3 value.1 3 comment { access 'read write' type INTEGER count 2 range '0 - 3' dbmin 0 dbmax 3000 dbvalue.0 3000 dbvalue.1 3000 } } control.11 { iface MIXER name 'Internal Mic Capture Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 3' dbmin 0 dbmax 3000 dbvalue.0 0 dbvalue.1 0 } } control.12 { iface MIXER name 'Master Playback Volume' value 64 comment { access 'read write' type INTEGER count 1 range '0 - 64' dbmin -9999999 dbmax 0 dbvalue.0 0 } } control.13 { iface MIXER name 'Master Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.14 { iface MIXER name 'PCM Playback Volume' value.0 255 value.1 255 comment { access 'read write user' type INTEGER count 2 range '0 - 255' tlv '0000000100000008ffffec1400000014' dbmin -5100 dbmax 0 dbvalue.0 0 dbvalue.1 0 } } } --endcollapse-- !!All Loaded Modules !!------------------ Module ip6t_LOG xt_pkttype xt_tcpudp ipt_LOG xt_limit rfcomm bnep af_packet ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw xt_NOTRACK ipt_REJECT iptable_raw iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_defrag_ipv4 ip_tables xt_conntrack nf_conntrack ip6table_filter ip6_tables vmsync x_tables vmblock cpufreq_conservative cpufreq_userspace cpufreq_powersave powernow_k8 mperf microcode dm_mod uvcvideo videodev v4l2_compat_ioctl32 ecb hp_wmi sparse_keymap snd_hda_codec_idt arc4 rt2800pci rt2800lib sp5100_tco crc_ccitt rt2x00pci snd_hda_codec_hdmi rt2x00lib mac80211 snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_timer snd r8169 soundcore snd_page_alloc btusb cfg80211 i2c_piix4 bluetooth hp_accel lis3lv02d video eeprom_93cx6 k10temp pcspkr joydev wmi input_polldev battery rfkill button ac sg autofs4 radeon ttm drm_kms_helper drm i2c_algo_bit fan thermal processor thermal_sys !!Sysfs Files !!----------- /sys/class/sound/hwC0D0/init_pin_configs: 0x03 0x18560010 /sys/class/sound/hwC0D0/driver_pin_configs: /sys/class/sound/hwC0D0/user_pin_configs: /sys/class/sound/hwC0D0/init_verbs: /sys/class/sound/hwC1D0/init_pin_configs: 0x0a 0x40f000f0 0x0b 0x0421201f 0x0c 0x04a12040 0x0d 0x90170110 0x0e 0x40f000f0 0x0f 0x40f000f0 0x10 0x40f000f0 0x11 0xd5a30150 0x1f 0x40f000f0 0x20 0x40f000f0 /sys/class/sound/hwC1D0/driver_pin_configs: /sys/class/sound/hwC1D0/user_pin_configs: /sys/class/sound/hwC1D0/init_verbs: !!ALSA/HDA dmesg !!------------------ [ 2.691942] [drm] Connector 1: [ 2.691944] [drm] HDMI-A [ 2.691946] [drm] HPD2 -- [ 2.753537] [drm] Radeon display connector LVDS-1: Found valid EDID [ 2.764090] [drm] Radeon display connector HDMI-A-1: No monitor connected or invalid EDID [ 2.775710] [drm] Radeon display connector VGA-1: No monitor connected or invalid EDID -- [ 10.316974] boot.lvm[352]: Waiting for udev to settle... [ 10.322287] snd_hda_intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 10.322299] ALSA hda_intel.c:2415 Using LPIB position fix [ 10.322389] snd_hda_intel 0000:00:01.1: irq 42 for MSI/MSI-X [ 10.322425] snd_hda_intel 0000:00:01.1: setting latency timer to 64 [ 10.332942] ALSA hda_intel.c:1492 Enable sync_write for stable communication [ 10.349423] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 10.350356] acpi device:02: registered as cooling_device2 [ 10.350515] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 10.350915] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:01.1/sound/card0/input7 [ 10.351456] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 10.351770] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 10.351779] ALSA hda_intel.c:2415 Using LPIB position fix [ 10.351897] snd_hda_intel 0000:00:14.2: setting latency timer to 64 [ 10.355676] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 -- [ 10.358249] rt2800pci 0000:02:00.0: setting latency timer to 64 [ 10.371359] ALSA hda_intel.c:1492 Enable sync_write for stable communication [ 10.378438] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' -- [ 10.379406] Registered led device: rt2800pci-phy0::quality [ 10.391146] ALSA patch_sigmatel.c:5656 mute LED gpio 1 polarity 0 [ 10.391162] ALSA hda_codec.c:4877 autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker [ 10.391167] ALSA hda_codec.c:4881 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 10.391172] ALSA hda_codec.c:4885 hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 10.391176] ALSA hda_codec.c:4886 mono: mono_out=0x0 [ 10.391179] ALSA hda_codec.c:4890 inputs: [ 10.391183] ALSA hda_codec.c:4894 Mic=0xc [ 10.391186] ALSA hda_codec.c:4896 [ 10.391434] ALSA patch_sigmatel.c:3104 stac92xx: dac_nids=1 (0x13/0x0/0x0/0x0/0x0) [ 10.391774] lis3lv02d: 8 bits 3DC sensor found [ 10.400366] input: HDA ATI SB Mic at Ext Right Jack as /devices/pci0000:00/0000:00:14.2/sound/card1/input8 [ 10.401650] input: HDA ATI SB HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:14.2/sound/card1/input9 [ 10.431566] boot.localnet[353]: Using boot-specified hostname 'linux-6ucj.site' -- [ 15.675961] mtp-probe[431]: bus: 1, device: 2 was not an MTP device [ 15.785446] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input12 [ 16.168608] boot.localnet[353]: Setting up loopback interface RTNETLINK answers: File exists -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=725701 https://bugzilla.novell.com/show_bug.cgi?id=725701#c Javier Llorente <javier@opensuse.org> changed: What |Removed |Added ---------------------------------------------------------------------------- Version|Factory |Final -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=725701 https://bugzilla.novell.com/show_bug.cgi?id=725701#c14 G Y <gy3544@yahoo.fr> changed: What |Removed |Added ---------------------------------------------------------------------------- CC|gy3544@yahoo.fr | --- Comment #14 from G Y <gy3544@yahoo.fr> 2011-11-27 11:14:15 UTC --- for me after an update, the sound is ok -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=725701 https://bugzilla.novell.com/show_bug.cgi?id=725701#c15 Takashi Iwai <tiwai@suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution| |FIXED --- Comment #15 from Takashi Iwai <tiwai@suse.com> 2011-12-20 16:36:52 UTC --- alsa-plugins-pulse should be dragged automatically via recommends tag (also via a proper pattern) in 12.1 final. Let's close. If you still see a problem, please reopen (or better to create another bug since this bug report became a bit messy now). -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
participants (1)
-
bugzilla_noreply@novell.com