https://bugzilla.novell.com/show_bug.cgi?id=835975 https://bugzilla.novell.com/show_bug.cgi?id=835975#c2 --- Comment #2 from Mario Guzman 2013-08-26 17:14:02 UTC --- Created an attachment (id=554281) --> (http://bugzilla.novell.com/attachment.cgi?id=554281) Here they are, don't know why they did not attach last time, sorry. Keep in mind these are from the working system and there is no way to get logs from the install. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=835975 https://bugzilla.novell.com/show_bug.cgi?id=835975#c3 Stefan Dirsch changed: What |Removed |Added ---------------------------------------------------------------------------- Priority|P5 - None |P3 - Medium Status|NEW |ASSIGNED AssignedTo|sndirsch@suse.com |xorg-maintainer-bugs@forge. | |provo.novell.com --- Comment #3 from Stefan Dirsch 2013-09-02 08:40:59 UTC ---

Section "Device" Identifier "Card0" Driver "radeon" BusID "PCI:1:0:0" EndSection

That one alone helps? Sounds weird. I would need Xorg.0.log without that file installed as well. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=835975 https://bugzilla.novell.com/show_bug.cgi?id=835975#c5 --- Comment #5 from Mario Guzman 2013-09-03 16:52:11 UTC --- Thank you for looking into this. Please keep in mind that the problem starts with the install not doing GUI. I attached (above): * The xorg.0.log after a failed start. * The yast install log which shows messages indicating: Either the required packages were not installed (minimal installation) or the graphics card is not properly supported. As fallback, the text front-end of YaST2 will guide you through the installation. This front-end offers the same functionality as the graphical one, but the screens differ from those in the manual. * Output of DMESG Also note the chipset is identified as "Chipset: "ATI Mobility Radeon HD 2600 XT" (ChipID = 0x9583)" in the x log as well as hardware info. This is also known as RV630. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=835975 https://bugzilla.novell.com/show_bug.cgi?id=835975#c7 --- Comment #7 from Mario Guzman 2013-09-04 18:27:43 UTC --- Created an attachment (id=555810) --> (http://bugzilla.novell.com/attachment.cgi?id=555810) Log files from 12.3 and 13.1 systems Sorry about the confusion I should have done a better job of identifying what files are from what systems. I have attached them all in 2 folders, a set from the 13.1 non-working system and the 12.3 working system (which is working because of the attached xorg.conf file). I will be glad to supply more but I need to know exactly what logs you want, I sent everything I could find from working 12.3 and non-working 13.1 systems. An idea: I wonder if YAST is the root of the problem. I thought xorg does not start so early during the install but could be it's used for the install GUI which does not run? If so the yast log has that error message. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=835975 https://bugzilla.novell.com/show_bug.cgi?id=835975#c9 --- Comment #9 from Mario Guzman 2013-09-04 18:49:47 UTC --- Created an attachment (id=555811) --> (http://bugzilla.novell.com/attachment.cgi?id=555811) 13.1 xorg log working with conf I left one log file out here it is. It is a test of the 13.1 system WITH the xorg.conf file installed so xorg starts and you can logon to KDE. So now you have 2 13.1 xorg logs, one without .conf and one with .conf installed. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=835975 https://bugzilla.novell.com/show_bug.cgi?id=835975#c11 --- Comment #11 from Mario Guzman 2013-09-05 16:54:26 UTC --- On the working 13.1: I removed the BusID line only from the xorg.conf file and the system stopped working as without the conf file so you're right BusID is the problem. If it helps: keep in mind this was not a problem with installs on 12.2, it started in 12.3. So something in the installation stopped detecting that busid properly, which fails the installation GUI and subsequent usage. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=835975 https://bugzilla.novell.com/show_bug.cgi?id=835975#c13 --- Comment #13 from Mario Guzman 2013-09-07 01:35:18 UTC --- So does that mean xserver runs very early on during the DVD install which is why the install GUI does not work? I thought YAST was having trouble with the correct detection of the video card which messed up xserver, so it's the other way around? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=835975 https://bugzilla.novell.com/show_bug.cgi?id=835975#c15 --- Comment #15 from Mario Guzman 2013-09-21 18:33:25 UTC --- 13.1 Beta 1 also broken. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=835975 https://bugzilla.novell.com/show_bug.cgi?id=835975#c Alberto Planas Dominguez changed: What |Removed |Added ---------------------------------------------------------------------------- Status Whiteboard| | SILVER -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=835975 https://bugzilla.novell.com/show_bug.cgi?id=835975#c17 --- Comment #17 from Mario Guzman 2013-12-01 19:31:25 UTC --- Unfortunately, 13.1 GA has the issue so cannot use. In addition, I tried 13.1 GA on a different PC with Nvidia and KDE desktop is totally useless, no icons at bottom, no fonts readable, etc. 13.1 has major video problems on 2 completely different machines. Was looking forward to 13.1 but spent so much time trying to make it work so will probably skip it in hopes 13.2 is better, 12.3 and latest Fedora works perfectly on both machines. Posting this in case someone has similar issues. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

http://bugzilla.novell.com/show_bug.cgi?id=835975 http://bugzilla.novell.com/show_bug.cgi?id=835975#c40 Egbert Eich changed: What |Removed |Added ---------------------------------------------------------------------------- Status|CONFIRMED |RESOLVED Resolution|--- |FIXED --- Comment #40 from Egbert Eich --- I will let this soak in TW for a bit and decide later if this should be pushed to Leap 42.1 and 13.2. Gary, the package should be available on X11:XOrg soon. Please grab and test. -- You are receiving this mail because: You are on the CC list for the bug.

http://bugzilla.novell.com/show_bug.cgi?id=835975 http://bugzilla.novell.com/show_bug.cgi?id=835975#c42 --- Comment #42 from Bernhard Wiedemann --- This is an autogenerated message for OBS integration: This bug (835975) was mentioned in https://build.opensuse.org/request/show/358787 Factory / xorg-x11-server -- You are receiving this mail because: You are on the CC list for the bug.