http://bugzilla.novell.com/show_bug.cgi?id=556118
http://bugzilla.novell.com/show_bug.cgi?id=556118#c5
Dusan Peterc changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEEDINFO |NEW
Info Provider|arahne@arahne.si |
--- Comment #5 from Dusan Peterc 2009-11-26 18:36:05 UTC ---
Other things I tried:
Start installation of Suse 11.2, then boot installed system, but it fails to
find any Linux partition, so I couldn't. Maybe this is because of ReiserFS.
I have tried the same with older versions of Suse 10.3, but it fails to start
installer, since the computer is too new.
Then I tried with Knoppix live CD, and it correctly showed the SUSE 11.2
partition, and mounted it read-write. So the partition was really not damaged.
After one week, I needed the computer to work again, so I installed Kubuntu
9.10, with the same partitioning, and file system choice, and it worked without
any tweaking.
After your replies, I did want got give SUSE 11.1 one more try, so I have
installed it again with the same settings. Even used the same partitioning
again.
The only thing I changed was that the computer was connected to the Internet,
while before it was not. I do not know if that changes the way the installation
operates. Anyway, this time it worked OK.
Or maybe that bios was updated?
So I can not provide you with the /var/log/boot.msg
of the broken installation, since now it works.
Maybe current boot.msg can help you examine which kind of hardware caused this
strange problem:
klogd 1.4.1, log source = ksyslog started.
<5>[ 0.000000] Linux version 2.6.31.5-0.1-desktop (geeko@buildhost) (gcc
version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #1 SMP PREEMPT
2009-10-26 15:49:03 +0100
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] NSC Geode by NSC
<6>[ 0.000000] Cyrix CyrixInstead
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] Transmeta GenuineTMx86
<6>[ 0.000000] Transmeta TransmetaCPU
<6>[ 0.000000] UMC UMC UMC UMC
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
<6>[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
<6>[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
<6>[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfc69000 (usable)
<6>[ 0.000000] BIOS-e820: 00000000bfc69000 - 00000000bfcbf000 (reserved)
<6>[ 0.000000] BIOS-e820: 00000000bfcbf000 - 00000000bfd82000 (usable)
<6>[ 0.000000] BIOS-e820: 00000000bfd82000 - 00000000bfdbf000 (ACPI NVS)
<6>[ 0.000000] BIOS-e820: 00000000bfdbf000 - 00000000bfdec000 (usable)
<6>[ 0.000000] BIOS-e820: 00000000bfdec000 - 00000000bfdff000 (ACPI data)
<6>[ 0.000000] BIOS-e820: 00000000bfdff000 - 00000000bfe00000 (usable)
<6>[ 0.000000] BIOS-e820: 00000000bfe00000 - 00000000c0000000 (reserved)
<6>[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
<6>[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<6>[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
<6>[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
<6>[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
<6>[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<6>[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
<6>[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
<6>[ 0.000000] DMI 2.4 present.
<6>[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x1000000
<7>[ 0.000000] MTRR default type: uncachable
<7>[ 0.000000] MTRR fixed ranges enabled:
<7>[ 0.000000] 00000-9FFFF write-back
<7>[ 0.000000] A0000-BFFFF uncachable
<7>[ 0.000000] C0000-DFFFF write-protect
<7>[ 0.000000] E0000-EFFFF uncachable
<7>[ 0.000000] F0000-FFFFF write-protect
<7>[ 0.000000] MTRR variable ranges enabled:
<7>[ 0.000000] 0 base 0FFFA0000 mask FFFFC0000 write-protect
<7>[ 0.000000] 1 base 0FFFE0000 mask FFFFE0000 write-protect
<7>[ 0.000000] 2 base 000000000 mask F80000000 write-back
<7>[ 0.000000] 3 base 080000000 mask FC0000000 write-back
<7>[ 0.000000] 4 base 0BFE00000 mask FFFE00000 uncachable
<7>[ 0.000000] 5 base 100000000 mask FC0000000 write-back
<7>[ 0.000000] 6 disabled
<7>[ 0.000000] 7 disabled
<6>[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
<7>[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000
(usable) ==> (reserved)
<6>[ 0.000000] Scanning 1 areas for low memory corruption
<6>[ 0.000000] modified physical RAM map:
<6>[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
<6>[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
<6>[ 0.000000] modified: 0000000000006000 - 000000000009e000 (usable)
<6>[ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved)
<6>[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
<6>[ 0.000000] modified: 0000000000100000 - 00000000bfc69000 (usable)
<6>[ 0.000000] modified: 00000000bfc69000 - 00000000bfcbf000 (reserved)
<6>[ 0.000000] modified: 00000000bfcbf000 - 00000000bfd82000 (usable)
<6>[ 0.000000] modified: 00000000bfd82000 - 00000000bfdbf000 (ACPI NVS)
<6>[ 0.000000] modified: 00000000bfdbf000 - 00000000bfdec000 (usable)
<6>[ 0.000000] modified: 00000000bfdec000 - 00000000bfdff000 (ACPI data)
<6>[ 0.000000] modified: 00000000bfdff000 - 00000000bfe00000 (usable)
<6>[ 0.000000] modified: 00000000bfe00000 - 00000000c0000000 (reserved)
<6>[ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved)
<6>[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
<6>[ 0.000000] modified: 00000000fed10000 - 00000000fed14000 (reserved)
<6>[ 0.000000] modified: 00000000fed18000 - 00000000fed1a000 (reserved)
<6>[ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
<6>[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
<6>[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
<6>[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
<7>[ 0.000000] initial memory mapped : 0 - 01000000
<6>[ 0.000000] init_memory_mapping: 0000000000000000-0000000036ffe000
<6>[ 0.000000] NX (Execute Disable) protection: active
<7>[ 0.000000] 0000000000 - 0000200000 page 4k
<7>[ 0.000000] 0000200000 - 0036e00000 page 2M
<7>[ 0.000000] 0036e00000 - 0036ffe000 page 4k
<7>[ 0.000000] kernel direct mapping tables up to 36ffe000 @ 7000-12000
<6>[ 0.000000] RAMDISK: 37971000 - 37fef2d1
<6>[ 0.000000] Allocated new RAMDISK: 00af7000 - 011752d1
<6>[ 0.000000] Move RAMDISK from 0000000037971000 - 0000000037fef2d0 to
00af7000 - 011752d0
<4>[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
<4>[ 0.000000] ACPI: XSDT bfdfe120 00064 (v01 ACRSYS ACRPRDCT 00000001
01000013)
<4>[ 0.000000] ACPI: FACP bfdfd000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025
01000013)
<4>[ 0.000000] ACPI: DSDT bfdef000 0913C (v01 ACRSYS ACRPRDCT 00000001 1025
01000013)
<4>[ 0.000000] ACPI: FACS bfd8f000 00040
<4>[ 0.000000] ACPI: HPET bfdfc000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025
01000013)
<4>[ 0.000000] ACPI: APIC bfdfb000 0006C (v02 ACRSYS ACRPRDCT 00000001 1025
01000013)
<4>[ 0.000000] ACPI: MCFG bfdfa000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025
01000013)
<4>[ 0.000000] ACPI: ASF! bfdf9000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025
01000013)
<4>[ 0.000000] ACPI: SLIC bfdee000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025
01000013)
<4>[ 0.000000] ACPI: BOOT bfded000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025
01000013)
<4>[ 0.000000] ACPI: SSDT bfdec000 00655 (v01 PmRef CpuPm 00003000 INTL
20051117)
<7>[ 0.000000] ACPI: Local APIC address 0xfee00000
<4>[ 0.000000] could not find any ACPI SRAT memory areas.
<3>[ 0.000000] failed to get NUMA memory information from SRAT table
<7>[ 0.000000] NUMA - single node, flat memory mode
<6>[ 0.000000] Node: 0, start_pfn: 0, end_pfn: 140000
<7>[ 0.000000] Setting physnode_map array to node 0 for pfns:
<7>[ 0.000000] 0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000
2c000 30000 34000 38000 3c000 40000 44000 48000 4c000 50000 54000 58000 5c000
60000 64000 68000 6c000 70000 74000 78000 7c000 80000 84000 88000 8c000 90000
94000 98000 9c000 a0000 a4000 a8000 ac000 b0000 b4000 b8000 bc000 c0000 c4000
c8000 cc000 d0000 d4000 d8000 dc000 e0000 e4000 e8000 ec000 f0000 f4000 f8000
fc000 100000 104000 108000 10c000 110000 114000 118000 11c000 120000 124000
128000 12c000 130000 134000 138000 13c000
<7>[ 0.000000] node 0 pfn: [0 - 140000]
<7>[ 0.000000] Reserving 10752 pages of KVA for lmem_map of node 0 at 13d600
<7>[ 0.000000] remove_active_range (0, 1299968, 1310720)
<6>[ 0.000000] Reserving total of 2a00 pages for numa KVA remap
<6>[ 0.000000] kva_start_pfn ~ 34400 max_low_pfn ~ 36ffe
<6>[ 0.000000] max_pfn = 140000
<5>[ 0.000000] 4240MB HIGHMEM available.
<5>[ 0.000000] 879MB LOWMEM available.
<7>[ 0.000000] max_low_pfn = 36ffe, highstart_pfn = 36ffe
<7>[ 0.000000] Low memory ends at vaddr f6ffe000
<7>[ 0.000000] node 0 will remap to vaddr f4400000 - f6e00000
<7>[ 0.000000] allocate_pgdat: node 0 NODE_DATA f4400000
<7>[ 0.000000] remap_numa_kva: node 0
<7>[ 0.000000] remap_numa_kva: f4400000 to pfn 0013d600
<7>[ 0.000000] remap_numa_kva: f4600000 to pfn 0013d800
<7>[ 0.000000] remap_numa_kva: f4800000 to pfn 0013da00
<7>[ 0.000000] remap_numa_kva: f4a00000 to pfn 0013dc00
<7>[ 0.000000] remap_numa_kva: f4c00000 to pfn 0013de00
<7>[ 0.000000] remap_numa_kva: f4e00000 to pfn 0013e000
<7>[ 0.000000] remap_numa_kva: f5000000 to pfn 0013e200
<7>[ 0.000000] remap_numa_kva: f5200000 to pfn 0013e400
<7>[ 0.000000] remap_numa_kva: f5400000 to pfn 0013e600
<7>[ 0.000000] remap_numa_kva: f5600000 to pfn 0013e800
<7>[ 0.000000] remap_numa_kva: f5800000 to pfn 0013ea00
<7>[ 0.000000] remap_numa_kva: f5a00000 to pfn 0013ec00
<7>[ 0.000000] remap_numa_kva: f5c00000 to pfn 0013ee00
<7>[ 0.000000] remap_numa_kva: f5e00000 to pfn 0013f000
<7>[ 0.000000] remap_numa_kva: f6000000 to pfn 0013f200
<7>[ 0.000000] remap_numa_kva: f6200000 to pfn 0013f400
<7>[ 0.000000] remap_numa_kva: f6400000 to pfn 0013f600
<7>[ 0.000000] remap_numa_kva: f6600000 to pfn 0013f800
<7>[ 0.000000] remap_numa_kva: f6800000 to pfn 0013fa00
<7>[ 0.000000] remap_numa_kva: f6a00000 to pfn 0013fc00
<7>[ 0.000000] remap_numa_kva: f6c00000 to pfn 0013fe00
<7>[ 0.000000] High memory starts at vaddr f6ffe000
<6>[ 0.000000] mapped low ram: 0 - 36ffe000
<6>[ 0.000000] low ram: 0 - 36ffe000
<6>[ 0.000000] node 0 low ram: 00000000 - 36ffe000
<6>[ 0.000000] node 0 bootmap 0000f000 - 00015e00
<6>[ 0.000000] (11 early reservations) ==> bootmem [0000000000 - 0036ffe000]
<6>[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
<6>[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==>
[0000001000 - 0000002000]
<6>[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==>
[0000006000 - 0000007000]
<6>[ 0.000000] #3 [0000200000 - 0000aeda90] TEXT DATA BSS ==>
[0000200000 - 0000aeda90]
<6>[ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==>
[000009e000 - 0000100000]
<6>[ 0.000000] #5 [0000aee000 - 0000af622c] BRK ==>
[0000aee000 - 0000af622c]
<6>[ 0.000000] #6 [0000007000 - 000000f000] PGTABLE ==>
[0000007000 - 000000f000]
<6>[ 0.000000] #7 [0000af7000 - 00011752d1] NEW RAMDISK ==>
[0000af7000 - 00011752d1]
<6>[ 0.000000] #8 [013d600000 - 0140000000] KVA RAM
<6>[ 0.000000] #9 [0034400000 - 0036e00000] KVA PG ==>
[0034400000 - 0036e00000]
<6>[ 0.000000] #10 [000000f000 - 0000016000] BOOTMAP ==>
[000000f000 - 0000016000]
<4>[ 0.000000] Zone PFN ranges:
<4>[ 0.000000] DMA 0x00000000 -> 0x00001000
<4>[ 0.000000] Normal 0x00001000 -> 0x00036ffe
<4>[ 0.000000] HighMem 0x00036ffe -> 0x00140000
<4>[ 0.000000] Movable zone start PFN for each node
<4>[ 0.000000] early_node_map[7] active PFN ranges
<4>[ 0.000000] 0: 0x00000000 -> 0x00000002
<4>[ 0.000000] 0: 0x00000006 -> 0x0000009e
<4>[ 0.000000] 0: 0x00000100 -> 0x000bfc69
<4>[ 0.000000] 0: 0x000bfcbf -> 0x000bfd82
<4>[ 0.000000] 0: 0x000bfdbf -> 0x000bfdec
<4>[ 0.000000] 0: 0x000bfdff -> 0x000bfe00
<4>[ 0.000000] 0: 0x00100000 -> 0x0013d600
<7>[ 0.000000] On node 0 totalpages: 1037044
<7>[ 0.000000] free_area_init_node: node 0, pgdat f4400000, node_mem_map
f4402000
<7>[ 0.000000] DMA zone: 32 pages used for memmap
<7>[ 0.000000] DMA zone: 0 pages reserved
<7>[ 0.000000] DMA zone: 3962 pages, LIFO batch:0
<7>[ 0.000000] Normal zone: 1728 pages used for memmap
<7>[ 0.000000] Normal zone: 219454 pages, LIFO batch:31
<7>[ 0.000000] HighMem zone: 8397 pages used for memmap
<7>[ 0.000000] HighMem zone: 803471 pages, LIFO batch:31
<6>[ 0.000000] Using APIC driver default
<6>[ 0.000000] ACPI: PM-Timer IO Port: 0x408
<7>[ 0.000000] ACPI: Local APIC address 0xfee00000
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
<6>[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
<6>[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI
0-23
<6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<7>[ 0.000000] ACPI: IRQ0 used by override.
<7>[ 0.000000] ACPI: IRQ2 used by override.
<7>[ 0.000000] ACPI: IRQ9 used by override.
<6>[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
<6>[ 0.000000] Using ACPI (MADT) for SMP configuration information
<6>[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
<6>[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
<7>[ 0.000000] nr_irqs_gsi: 24
<6>[ 0.000000] PM: Registered nosave memory: 0000000000002000 -
0000000000006000
<6>[ 0.000000] PM: Registered nosave memory: 000000000009e000 -
00000000000a0000
<6>[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
<6>[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
<6>[ 0.000000] Allocating PCI resources starting at c0000000 (gap:
c0000000:38000000)
<6>[ 0.000000] NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:8
<6>[ 0.000000] PERCPU: Embedded 14 pages at c1186000, static data 34204
bytes
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 1026887
<4>[ 0.000000] Policy zone: HighMem
<5>[ 0.000000] Kernel command line:
root=/dev/disk/by-id/ata-ST9500325AS_5VE0FK88-part6
resume=/dev/disk/by-id/ata-ST9500325AS_5VE0FK88-part5 splash=silent quiet
vga=0x31a
<6>[ 0.000000] bootsplash: silent mode.
<4>[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
<6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
<6>[ 0.000000] Enabling fast FPU save and restore... done.
<6>[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
<6>[ 0.000000] Initializing CPU#0
<6>[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
<6>[ 0.000000] Initializing HighMem for node 0 (00036ffe:0013d600)
<6>[ 0.000000] Memory: 4088192k/5242880k available (4719k kernel code,
59980k reserved, 2944k data, 464k init, 3247472k highmem)
<6>[ 0.000000] virtual kernel memory layout:
<6>[ 0.000000] fixmap : 0xff5b5000 - 0xfffff000 (10536 kB)
<6>[ 0.000000] pkmap : 0xff000000 - 0xff200000 (2048 kB)
<6>[ 0.000000] vmalloc : 0xf77fe000 - 0xfeffe000 ( 120 MB)
<6>[ 0.000000] lowmem : 0xc0000000 - 0xf6ffe000 ( 879 MB)
<6>[ 0.000000] .init : 0xc097d000 - 0xc09f1000 ( 464 kB)
<6>[ 0.000000] .data : 0xc069bd42 - 0xc097c008 (2944 kB)
<6>[ 0.000000] .text : 0xc0200000 - 0xc069bd42 (4719 kB)
<6>[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
<6>[ 0.000000] Hierarchical RCU implementation.
<6>[ 0.000000] NR_IRQS:2304 nr_irqs:440
<4>[ 0.000000] Fast TSC calibration using PIT
<4>[ 0.000000] Detected 1995.168 MHz processor.
<4>[ 0.000101] Console: colour dummy device 80x25
<6>[ 0.000106] console [tty0] enabled
<7>[ 0.000311] hpet clockevent registered
<6>[ 0.000317] HPET: 4 timers in total, 0 timers will be used for per-cpu
timer
<6>[ 0.000323] Calibrating delay loop (skipped), value calculated using
timer frequency.. 3990.33 BogoMIPS (lpj=1995168)
<4>[ 0.006147] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI,
All Rights Reserved
<6>[ 0.006239] Security Framework initialized
<6>[ 0.006261] AppArmor: AppArmor initialized
<4>[ 0.006288] Mount-cache hash table entries: 512
<6>[ 0.006471] CPU: L1 I cache: 32K, L1 D cache: 32K
<6>[ 0.006475] CPU: L2 cache: 3072K
<6>[ 0.006478] CPU: Physical Processor ID: 0
<6>[ 0.006481] CPU: Processor Core ID: 0
<6>[ 0.006486] mce: CPU supports 6 MCE banks
<6>[ 0.006497] CPU0: Thermal monitoring enabled (TM1)
<6>[ 0.006501] using mwait in idle threads.
<6>[ 0.006508] Performance Counters: Core2 events, Intel PMU driver.
<6>[ 0.006515] ... version: 2
<6>[ 0.006518] ... bit width: 40
<6>[ 0.006520] ... generic counters: 2
<6>[ 0.006523] ... value mask: 000000ffffffffff
<6>[ 0.006525] ... max period: 000000007fffffff
<6>[ 0.006528] ... fixed-purpose counters: 3
<6>[ 0.006530] ... counter mask: 0000000700000003
<6>[ 0.006536] Checking 'hlt' instruction... OK.
<6>[ 0.011625] ACPI: Core revision 20090521
<6>[ 0.032235] Mapping cpu 0 to node 0
<6>[ 0.032419] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>[ 0.043034] CPU0: Intel(R) Core(TM)2 Quad CPU Q9000 @ 2.00GHz
stepping 0a
<6>[ 0.043993] Booting processor 1 APIC 0x1 ip 0x6000
<6>[ 0.000999] Initializing CPU#1
<6>[ 0.000999] Mapping cpu 1 to node 0
<6>[ 0.000999] Calibrating delay using timer specific routine.. 3989.79
BogoMIPS (lpj=1994898)
<6>[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
<6>[ 0.000999] CPU: L2 cache: 3072K
<6>[ 0.000999] CPU: Physical Processor ID: 0
<6>[ 0.000999] CPU: Processor Core ID: 1
<6>[ 0.000999] mce: CPU supports 6 MCE banks
<6>[ 0.000999] CPU1: Thermal monitoring enabled (TM1)
<6>[ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new
0x7010600070106
<6>[ 0.116139] CPU1: Intel(R) Core(TM)2 Quad CPU Q9000 @ 2.00GHz
stepping 0a
<6>[ 0.116154] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
<6>[ 0.117104] Booting processor 2 APIC 0x2 ip 0x6000
<6>[ 0.000999] Initializing CPU#2
<6>[ 0.000999] Mapping cpu 2 to node 0
<6>[ 0.000999] Calibrating delay using timer specific routine.. 3989.81
BogoMIPS (lpj=1994905)
<6>[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
<6>[ 0.000999] CPU: L2 cache: 3072K
<6>[ 0.000999] CPU: Physical Processor ID: 0
<6>[ 0.000999] CPU: Processor Core ID: 2
<6>[ 0.000999] mce: CPU supports 6 MCE banks
<6>[ 0.000999] CPU2: Thermal monitoring enabled (TM1)
<6>[ 0.000999] x86 PAT enabled: cpu 2, old 0x7040600070406, new
0x7010600070106
<6>[ 0.189702] CPU2: Intel(R) Core(TM)2 Quad CPU Q9000 @ 2.00GHz
stepping 0a
<6>[ 0.189716] checking TSC synchronization [CPU#1 -> CPU#2]: passed.
<6>[ 0.210074] Booting processor 3 APIC 0x3 ip 0x6000
<6>[ 0.000999] Initializing CPU#3
<6>[ 0.000999] Mapping cpu 3 to node 0
<6>[ 0.000999] Calibrating delay using timer specific routine.. 3989.80
BogoMIPS (lpj=1994903)
<6>[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
<6>[ 0.000999] CPU: L2 cache: 3072K
<6>[ 0.000999] CPU: Physical Processor ID: 0
<6>[ 0.000999] CPU: Processor Core ID: 3
<6>[ 0.000999] mce: CPU supports 6 MCE banks
<6>[ 0.000999] CPU3: Thermal monitoring enabled (TM1)
<6>[ 0.000999] x86 PAT enabled: cpu 3, old 0x7040600070406, new
0x7010600070106
<6>[ 0.281866] CPU3: Intel(R) Core(TM)2 Quad CPU Q9000 @ 2.00GHz
stepping 0a
<6>[ 0.281883] checking TSC synchronization [CPU#2 -> CPU#3]: passed.
<6>[ 0.301982] Brought up 4 CPUs
<6>[ 0.301982] Total of 4 processors activated (15959.74 BogoMIPS).
<7>[ 0.302067] CPU0 attaching sched-domain:
<7>[ 0.302070] domain 0: span 0-1 level MC
<7>[ 0.302073] groups: 0 1
<7>[ 0.302079] domain 1: span 0-3 level CPU
<7>[ 0.302081] groups: 0-1 2-3
<7>[ 0.302086] domain 2: span 0-3 level NODE
<7>[ 0.302089] groups: 0-3 (__cpu_power = 2048)
<7>[ 0.302096] CPU1 attaching sched-domain:
<7>[ 0.302098] domain 0: span 0-1 level MC
<7>[ 0.302101] groups: 1 0
<7>[ 0.302106] domain 1: span 0-3 level CPU
<7>[ 0.302108] groups: 0-1 2-3
<7>[ 0.302113] domain 2: span 0-3 level NODE
<7>[ 0.302116] groups: 0-3 (__cpu_power = 2048)
<7>[ 0.302122] CPU2 attaching sched-domain:
<7>[ 0.302124] domain 0: span 2-3 level MC
<7>[ 0.302127] groups: 2 3
<7>[ 0.302131] domain 1: span 0-3 level CPU
<7>[ 0.302134] groups: 2-3 0-1
<7>[ 0.302139] domain 2: span 0-3 level NODE
<7>[ 0.302141] groups: 0-3 (__cpu_power = 2048)
<7>[ 0.302147] CPU3 attaching sched-domain:
<7>[ 0.302149] domain 0: span 2-3 level MC
<7>[ 0.302152] groups: 3 2
<7>[ 0.302156] domain 1: span 0-3 level CPU
<7>[ 0.302159] groups: 2-3 0-1
<7>[ 0.302164] domain 2: span 0-3 level NODE
<7>[ 0.302167] groups: 0-3 (__cpu_power = 2048)
<6>[ 0.307008] devtmpfs: initialized
<6>[ 0.307984] Booting paravirtualized kernel on bare hardware
<6>[ 0.308175] regulator: core version 0.5
<4>[ 0.308175] Time: 16:41:27 Date: 11/26/09
<6>[ 0.308175] NET: Registered protocol family 16
<6>[ 0.308242] ACPI: bus type pci registered
<5>[ 0.308318] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 -
63
<5>[ 0.308321] PCI: MCFG area at f8000000 reserved in E820
<6>[ 0.308324] PCI: Using MMCONFIG for extended config space
<6>[ 0.308326] PCI: Using configuration type 1 for base access
<4>[ 0.309063] bio: create slab <bio-0> at 0
<7>[ 0.311667] ACPI: EC: Look up EC in DSDT
<5>[ 0.329018] ACPI: BIOS _OSI(Linux) query ignored
<6>[ 0.342002] ACPI: Interpreter enabled
<6>[ 0.342002] ACPI: (supports S0 S3 S4 S5)
<6>[ 0.342065] ACPI: Using IOAPIC for interrupt routing
<4>[ 0.343007] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC
function
<6>[ 0.349933] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
<6>[ 0.349936] ACPI: EC: driver started in poll mode
<6>[ 0.350050] ACPI: Power Resource [FN00] (off)
<6>[ 0.350448] ACPI: No dock devices found.
<6>[ 0.351186] ACPI: PCI Root Bridge [PCI0] (0000:00)
<6>[ 0.351316] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
<6>[ 0.351320] pci 0000:00:01.0: PME# disabled
<7>[ 0.351444] pci 0000:00:1a.0: reg 20 io port: [0x70e0-0x70ff]
<7>[ 0.351579] pci 0000:00:1a.1: reg 20 io port: [0x70c0-0x70df]
<7>[ 0.351697] pci 0000:00:1a.7: reg 10 32bit mmio: [0xdb305c00-0xdb305fff]
<6>[ 0.351776] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
<6>[ 0.351781] pci 0000:00:1a.7: PME# disabled
<7>[ 0.351840] pci 0000:00:1b.0: reg 10 64bit mmio: [0xdb300000-0xdb303fff]
<6>[ 0.351897] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
<6>[ 0.351902] pci 0000:00:1b.0: PME# disabled
<6>[ 0.351984] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[ 0.351989] pci 0000:00:1c.0: PME# disabled
<6>[ 0.352082] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
<6>[ 0.352087] pci 0000:00:1c.1: PME# disabled
<6>[ 0.352173] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
<6>[ 0.352178] pci 0000:00:1c.3: PME# disabled
<6>[ 0.352257] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[ 0.352263] pci 0000:00:1c.4: PME# disabled
<7>[ 0.352363] pci 0000:00:1d.0: reg 20 io port: [0x70a0-0x70bf]
<7>[ 0.352498] pci 0000:00:1d.1: reg 20 io port: [0x7080-0x709f]
<7>[ 0.352632] pci 0000:00:1d.2: reg 20 io port: [0x7060-0x707f]
<7>[ 0.352759] pci 0000:00:1d.3: reg 20 io port: [0x7040-0x705f]
<7>[ 0.352869] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdb305800-0xdb305bff]
<6>[ 0.352945] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
<6>[ 0.352950] pci 0000:00:1d.7: PME# disabled
<7>[ 0.353188] pci 0000:00:1f.2: reg 10 io port: [0x7108-0x710f]
<7>[ 0.353196] pci 0000:00:1f.2: reg 14 io port: [0x7114-0x7117]
<7>[ 0.353204] pci 0000:00:1f.2: reg 18 io port: [0x7100-0x7107]
<7>[ 0.353212] pci 0000:00:1f.2: reg 1c io port: [0x7110-0x7113]
<7>[ 0.353220] pci 0000:00:1f.2: reg 20 io port: [0x7020-0x703f]
<7>[ 0.353228] pci 0000:00:1f.2: reg 24 32bit mmio: [0xdb305000-0xdb3057ff]
<6>[ 0.353273] pci 0000:00:1f.2: PME# supported from D3hot
<6>[ 0.353278] pci 0000:00:1f.2: PME# disabled
<7>[ 0.353315] pci 0000:00:1f.3: reg 10 64bit mmio: [0xdb306000-0xdb3060ff]
<7>[ 0.353336] pci 0000:00:1f.3: reg 20 io port: [0x7000-0x701f]
<7>[ 0.353401] pci 0000:00:1f.6: reg 10 64bit mmio: [0xdb304000-0xdb304fff]
<7>[ 0.353662] pci 0000:01:00.0: reg 10 32bit mmio: [0xd2000000-0xd2ffffff]
<7>[ 0.353729] pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
<7>[ 0.353795] pci 0000:01:00.0: reg 1c 64bit mmio: [0xd0000000-0xd1ffffff]
<7>[ 0.353830] pci 0000:01:00.0: reg 24 io port: [0x6000-0x607f]
<7>[ 0.353864] pci 0000:01:00.0: reg 30 32bit mmio: [0xfff80000-0xffffffff]
<7>[ 0.357263] pci 0000:00:01.0: bridge io port: [0x6000-0x6fff]
<7>[ 0.357267] pci 0000:00:01.0: bridge 32bit mmio: [0xd0000000-0xd2ffffff]
<7>[ 0.357273] pci 0000:00:01.0: bridge 64bit mmio pref:
[0xc0000000-0xcfffffff]
<7>[ 0.357344] pci 0000:02:00.0: reg 10 64bit mmio: [0xda200000-0xda23ffff]
<7>[ 0.357356] pci 0000:02:00.0: reg 18 io port: [0x4000-0x407f]
<6>[ 0.357440] pci 0000:02:00.0: PME# supported from D3hot D3cold
<6>[ 0.357447] pci 0000:02:00.0: PME# disabled
<6>[ 0.357491] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You
can enable it with 'pcie_aspm=force'
<7>[ 0.357588] pci 0000:00:1c.0: bridge io port: [0x4000-0x5fff]
<7>[ 0.357594] pci 0000:00:1c.0: bridge 32bit mmio: [0xda200000-0xdb2fffff]
<7>[ 0.357602] pci 0000:00:1c.0: bridge 64bit mmio pref:
[0xd3000000-0xd3ffffff]
<7>[ 0.357662] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
<7>[ 0.357667] pci 0000:00:1c.1: bridge 32bit mmio: [0xd9200000-0xda1fffff]
<7>[ 0.357675] pci 0000:00:1c.1: bridge 64bit mmio pref:
[0xd4000000-0xd4ffffff]
<7>[ 0.357764] pci 0000:05:00.0: reg 10 64bit mmio: [0xd8100000-0xd8101fff]
<6>[ 0.357874] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
<6>[ 0.357882] pci 0000:05:00.0: PME# disabled
<7>[ 0.360130] pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff]
<7>[ 0.360136] pci 0000:00:1c.3: bridge 32bit mmio: [0xd8100000-0xd91fffff]
<7>[ 0.360144] pci 0000:00:1c.3: bridge 64bit mmio pref:
[0xd5000000-0xd5ffffff]
<7>[ 0.360207] pci 0000:00:1c.4: bridge io port: [0x1000-0x1fff]
<7>[ 0.360212] pci 0000:00:1c.4: bridge 32bit mmio: [0xd7000000-0xd80fffff]
<7>[ 0.360219] pci 0000:00:1c.4: bridge 64bit mmio pref:
[0xd6000000-0xd6ffffff]
<6>[ 0.360280] pci 0000:00:1e.0: transparent bridge
<7>[ 0.360324] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>[ 0.360654] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
<7>[ 0.360799] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
<7>[ 0.360979] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
<7>[ 0.361110] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
<7>[ 0.361242] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
<7>[ 0.361368] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
<6>[ 0.379088] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
<6>[ 0.379268] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
<6>[ 0.379445] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
<6>[ 0.379621] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
<6>[ 0.379797] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0,
disabled.
<6>[ 0.379975] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
<6>[ 0.380157] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
<6>[ 0.380333] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
<5>[ 0.380598] SCSI subsystem initialized
<7>[ 0.381019] libata version 3.00 loaded.
<6>[ 0.381041] usbcore: registered new interface driver usbfs
<6>[ 0.381052] usbcore: registered new interface driver hub
<6>[ 0.381057] usbcore: registered new device driver usb
<6>[ 0.381057] PCI: Using ACPI for IRQ routing
<6>[ 0.384019] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
<6>[ 0.384026] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
<6>[ 0.390203] AppArmor: AppArmor Filesystem Enabled
<6>[ 0.392924] pnp: PnP ACPI init
<6>[ 0.392934] ACPI: bus type pnp registered
<4>[ 0.394498] pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.4
BAR 13 (0x1000-0x1fff), disabling
<6>[ 0.395640] pnp: PnP ACPI: found 10 devices
<6>[ 0.395643] ACPI: ACPI bus type pnp unregistered
<6>[ 0.395655] system 00:01: ioport range 0x600-0x60f has been reserved
<6>[ 0.395658] system 00:01: ioport range 0x610-0x610 has been reserved
<6>[ 0.395662] system 00:01: ioport range 0x800-0x80f has been reserved
<6>[ 0.395665] system 00:01: ioport range 0x810-0x817 has been reserved
<6>[ 0.395668] system 00:01: ioport range 0x820-0x823 has been reserved
<6>[ 0.395672] system 00:01: ioport range 0x400-0x47f has been reserved
<6>[ 0.395676] system 00:01: ioport range 0x500-0x53f has been reserved
<6>[ 0.395680] system 00:01: iomem range 0xf8000000-0xfbffffff has been
reserved
<6>[ 0.395683] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been
reserved
<6>[ 0.395687] system 00:01: iomem range 0xfed10000-0xfed13fff has been
reserved
<6>[ 0.395690] system 00:01: iomem range 0xfed18000-0xfed18fff has been
reserved
<6>[ 0.395694] system 00:01: iomem range 0xfed19000-0xfed19fff has been
reserved
<6>[ 0.395697] system 00:01: iomem range 0xfec00000-0xfec00fff could not be
reserved
<6>[ 0.395701] system 00:01: iomem range 0xfed20000-0xfed3ffff has been
reserved
<6>[ 0.395704] system 00:01: iomem range 0xfed40000-0xfed44fff has been
reserved
<6>[ 0.395708] system 00:01: iomem range 0xfed45000-0xfed8ffff has been
reserved
<6>[ 0.395712] system 00:01: iomem range 0xfee00000-0xfee00fff has been
reserved
<3>[ 0.430572] pci 0000:01:00.0: BAR 6: no parent found for of device
[0xfff80000-0xffffffff]
<6>[ 0.430637] pci 0000:01:00.0: BAR 6: can't allocate mem resource
[0xd0000000-0xcfffffff]
<6>[ 0.430641] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
<6>[ 0.430644] pci 0000:00:01.0: IO window: 0x6000-0x6fff
<6>[ 0.430649] pci 0000:00:01.0: MEM window: 0xd0000000-0xd2ffffff
<6>[ 0.430653] pci 0000:00:01.0: PREFETCH window:
0x000000c0000000-0x000000cfffffff
<6>[ 0.430659] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
<6>[ 0.430663] pci 0000:00:1c.0: IO window: 0x4000-0x5fff
<6>[ 0.430669] pci 0000:00:1c.0: MEM window: 0xda200000-0xdb2fffff
<6>[ 0.430675] pci 0000:00:1c.0: PREFETCH window:
0x000000d3000000-0x000000d3ffffff
<6>[ 0.430683] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
<6>[ 0.430687] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
<6>[ 0.430694] pci 0000:00:1c.1: MEM window: 0xd9200000-0xda1fffff
<6>[ 0.430700] pci 0000:00:1c.1: PREFETCH window:
0x000000d4000000-0x000000d4ffffff
<6>[ 0.430708] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
<6>[ 0.430712] pci 0000:00:1c.3: IO window: 0x2000-0x2fff
<6>[ 0.430718] pci 0000:00:1c.3: MEM window: 0xd8100000-0xd91fffff
<6>[ 0.430723] pci 0000:00:1c.3: PREFETCH window:
0x000000d5000000-0x000000d5ffffff
<6>[ 0.430732] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
<6>[ 0.430736] pci 0000:00:1c.4: IO window: 0x1000-0x1fff
<6>[ 0.430742] pci 0000:00:1c.4: MEM window: 0xd7000000-0xd80fffff
<6>[ 0.430747] pci 0000:00:1c.4: PREFETCH window:
0x000000d6000000-0x000000d6ffffff
<6>[ 0.430756] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
<6>[ 0.430758] pci 0000:00:1e.0: IO window: disabled
<6>[ 0.430765] pci 0000:00:1e.0: MEM window: disabled
<6>[ 0.430770] pci 0000:00:1e.0: PREFETCH window: disabled
<7>[ 0.430781] alloc irq_desc for 16 on node 0
<7>[ 0.430783] alloc kstat_irqs on node 0
<6>[ 0.430789] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
<7>[ 0.430794] pci 0000:00:01.0: setting latency timer to 64
<7>[ 0.430802] alloc irq_desc for 17 on node 0
<7>[ 0.430804] alloc kstat_irqs on node 0
<6>[ 0.430808] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
<7>[ 0.430814] pci 0000:00:1c.0: setting latency timer to 64
<6>[ 0.430821] pci 0000:00:1c.1: enabling device (0000 -> 0003)
<6>[ 0.430826] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
<7>[ 0.430833] pci 0000:00:1c.1: setting latency timer to 64
<7>[ 0.430842] alloc irq_desc for 19 on node 0
<7>[ 0.430844] alloc kstat_irqs on node 0
<6>[ 0.430848] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
<7>[ 0.430853] pci 0000:00:1c.3: setting latency timer to 64
<6>[ 0.430862] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
<7>[ 0.430867] pci 0000:00:1c.4: setting latency timer to 64
<7>[ 0.430876] pci 0000:00:1e.0: setting latency timer to 64
<7>[ 0.430881] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
<7>[ 0.430884] pci_bus 0000:00: resource 1 mem:
[0x000000-0xffffffffffffffff]
<7>[ 0.430887] pci_bus 0000:01: resource 0 io: [0x6000-0x6fff]
<7>[ 0.430890] pci_bus 0000:01: resource 1 mem: [0xd0000000-0xd2ffffff]
<7>[ 0.430893] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
<7>[ 0.430896] pci_bus 0000:02: resource 0 io: [0x4000-0x5fff]
<7>[ 0.430899] pci_bus 0000:02: resource 1 mem: [0xda200000-0xdb2fffff]
<7>[ 0.430902] pci_bus 0000:02: resource 2 pref mem [0xd3000000-0xd3ffffff]
<7>[ 0.430905] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff]
<7>[ 0.430908] pci_bus 0000:03: resource 1 mem: [0xd9200000-0xda1fffff]
<7>[ 0.430915] pci_bus 0000:03: resource 2 pref mem [0xd4000000-0xd4ffffff]
<7>[ 0.430918] pci_bus 0000:05: resource 0 io: [0x2000-0x2fff]
<7>[ 0.430921] pci_bus 0000:05: resource 1 mem: [0xd8100000-0xd91fffff]
<7>[ 0.430924] pci_bus 0000:05: resource 2 pref mem [0xd5000000-0xd5ffffff]
<7>[ 0.430927] pci_bus 0000:06: resource 0 io: [0x1000-0x1fff]
<7>[ 0.430930] pci_bus 0000:06: resource 1 mem: [0xd7000000-0xd80fffff]
<7>[ 0.430933] pci_bus 0000:06: resource 2 pref mem [0xd6000000-0xd6ffffff]
<7>[ 0.430936] pci_bus 0000:07: resource 3 io: [0x00-0xffff]
<7>[ 0.430939] pci_bus 0000:07: resource 4 mem:
[0x000000-0xffffffffffffffff]
<6>[ 0.431026] NET: Registered protocol family 2
<6>[ 0.431149] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
<6>[ 0.431536] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
<6>[ 0.431888] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>[ 0.432061] TCP: Hash tables configured (established 131072 bind 65536)
<6>[ 0.432063] TCP reno registered
<6>[ 0.432179] NET: Registered protocol family 1
<6>[ 0.432239] Unpacking initramfs...
<7>[ 0.500188] Switched to high resolution mode on CPU 1
<7>[ 0.500911] Switched to high resolution mode on CPU 3
<7>[ 0.500955] Switched to high resolution mode on CPU 2
<7>[ 0.500989] Switched to high resolution mode on CPU 0
<6>[ 0.591047] Freeing initrd memory: 6648k freed
<4>[ 0.593819] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
<6>[ 0.593823] Simple Boot Flag at 0x44 set to 0x1
<6>[ 0.594406] Scanning for low memory corruption every 60 seconds
<6>[ 0.594608] audit: initializing netlink socket (disabled)
<5>[ 0.594623] type=2000 audit(1259253687.594:1): initialized
<4>[ 0.598160] highmem bounce pool size: 64 pages
<6>[ 0.598166] HugeTLB registered 2 MB page size, pre-allocated 0 pages
<5>[ 0.598396] VFS: Disk quotas dquot_6.5.2
<4>[ 0.598446] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>[ 0.598650] msgmni has been set to 413
<6>[ 0.598764] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
<6>[ 0.598769] io scheduler noop registered
<6>[ 0.598771] io scheduler anticipatory registered
<6>[ 0.598773] io scheduler deadline registered
<6>[ 0.598802] io scheduler cfq registered (default)
<7>[ 0.621113] pci 0000:01:00.0: Boot video device
<7>[ 0.622446] alloc irq_desc for 24 on node 0
<7>[ 0.622450] alloc kstat_irqs on node 0
<7>[ 0.622460] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
<7>[ 0.622469] pcieport-driver 0000:00:01.0: setting latency timer to 64
<7>[ 0.623459] alloc irq_desc for 25 on node 0
<7>[ 0.623462] alloc kstat_irqs on node 0
<7>[ 0.623474] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
<7>[ 0.623487] pcieport-driver 0000:00:1c.0: setting latency timer to 64
<7>[ 0.624459] alloc irq_desc for 26 on node 0
<7>[ 0.624462] alloc kstat_irqs on node 0
<7>[ 0.624473] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
<7>[ 0.624486] pcieport-driver 0000:00:1c.1: setting latency timer to 64
<7>[ 0.625458] alloc irq_desc for 27 on node 0
<7>[ 0.625461] alloc kstat_irqs on node 0
<7>[ 0.625472] pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
<7>[ 0.625485] pcieport-driver 0000:00:1c.3: setting latency timer to 64
<7>[ 0.626459] alloc irq_desc for 28 on node 0
<7>[ 0.626462] alloc kstat_irqs on node 0
<7>[ 0.626473] pcieport-driver 0000:00:1c.4: irq 28 for MSI/MSI-X
<7>[ 0.626486] pcieport-driver 0000:00:1c.4: setting latency timer to 64
<4>[ 0.626645] pci-stub: invalid id string ""
<6>[ 0.626927] vesafb: framebuffer at 0xd1000000, mapped to 0xf7880000,
using 5120k, total 14336k
<6>[ 0.626930] vesafb: mode is 1280x1024x16, linelength=2560, pages=1
<6>[ 0.626933] vesafb: protected mode interface info at c000:c180
<6>[ 0.626936] vesafb: pmi: set display start = c00cc1e3, set palette =
c00cc23e
<6>[ 0.626938] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8
3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
<6>[ 0.626954] vesafb: scrolling: redraw
<6>[ 0.626957] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>[ 0.627178] bootsplash 3.1.6-2004/03/31: looking for picture...
<6>[ 0.644627] bootsplash: silentjpeg size 130564 bytes
<6>[ 0.670521] bootsplash: ...found (1280x1024, 29083 bytes, v3).
<4>[ 0.746175] Console: switching to colour frame buffer device 156x60
<6>[ 0.821404] fb0: VESA VGA frame buffer device
<6>[ 0.823195] Non-volatile memory driver v1.3
<6>[ 0.823198] Linux agpgart interface v0.103
<6>[ 0.823233] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
<7>[ 0.823860] ahci 0000:00:1f.2: version 3.0
<6>[ 0.823877] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
<7>[ 0.823922] alloc irq_desc for 29 on node 0
<7>[ 0.823925] alloc kstat_irqs on node 0
<7>[ 0.823937] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
<6>[ 0.823984] ahci: SSS flag set, parallel bus scan disabled
<6>[ 0.824035] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps
0x33 impl SATA mode
<6>[ 0.824040] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo
pmp pio slum part ems
<7>[ 0.824047] ahci 0000:00:1f.2: setting latency timer to 64
<6>[ 0.830064] scsi0 : ahci
<6>[ 0.830198] scsi1 : ahci
<6>[ 0.830273] scsi2 : ahci
<6>[ 0.830348] scsi3 : ahci
<6>[ 0.830426] scsi4 : ahci
<6>[ 0.830499] scsi5 : ahci
<6>[ 0.830748] ata1: SATA max UDMA/133 abar m2048@0xdb305000 port 0xdb305100
irq 29
<6>[ 0.830753] ata2: SATA max UDMA/133 abar m2048@0xdb305000 port 0xdb305180
irq 29
<6>[ 0.830756] ata3: DUMMY
<6>[ 0.830758] ata4: DUMMY
<6>[ 0.830762] ata5: SATA max UDMA/133 abar m2048@0xdb305000 port 0xdb305300
irq 29
<6>[ 0.830767] ata6: SATA max UDMA/133 abar m2048@0xdb305000 port 0xdb305380
irq 29
<6>[ 0.830858] Fixed MDIO Bus: probed
<6>[ 0.830865] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 0.830948] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) ->
IRQ 19
<7>[ 0.830962] ehci_hcd 0000:00:1a.7: setting latency timer to 64
<6>[ 0.830967] ehci_hcd 0000:00:1a.7: EHCI Host Controller
<6>[ 0.831014] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
number 1
<6>[ 0.834941] ehci_hcd 0000:00:1a.7: debug port 1
<7>[ 0.834949] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
<6>[ 0.834967] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdb305c00
<6>[ 0.844010] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
<6>[ 0.844047] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 0.844051] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
<6>[ 0.844055] usb usb1: Product: EHCI Host Controller
<6>[ 0.844058] usb usb1: Manufacturer: Linux 2.6.31.5-0.1-desktop ehci_hcd
<6>[ 0.844061] usb usb1: SerialNumber: 0000:00:1a.7
<6>[ 0.844167] usb usb1: configuration #1 chosen from 1 choice
<6>[ 0.844207] hub 1-0:1.0: USB hub found
<6>[ 0.844216] hub 1-0:1.0: 4 ports detected
<7>[ 0.845395] alloc irq_desc for 23 on node 0
<7>[ 0.845398] alloc kstat_irqs on node 0
<6>[ 0.845405] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) ->
IRQ 23
<7>[ 0.845419] ehci_hcd 0000:00:1d.7: setting latency timer to 64
<6>[ 0.845423] ehci_hcd 0000:00:1d.7: EHCI Host Controller
<6>[ 0.845436] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 2
<6>[ 0.849342] ehci_hcd 0000:00:1d.7: debug port 1
<7>[ 0.849350] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
<6>[ 0.849367] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdb305800
<6>[ 0.859010] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
<6>[ 0.859032] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 0.859036] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
<6>[ 0.859040] usb usb2: Product: EHCI Host Controller
<6>[ 0.859043] usb usb2: Manufacturer: Linux 2.6.31.5-0.1-desktop ehci_hcd
<6>[ 0.859046] usb usb2: SerialNumber: 0000:00:1d.7
<6>[ 0.859131] usb usb2: configuration #1 chosen from 1 choice
<6>[ 0.859168] hub 2-0:1.0: USB hub found
<6>[ 0.859176] hub 2-0:1.0: 8 ports detected
<6>[ 0.859271] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[ 0.859289] uhci_hcd: USB Universal Host Controller Interface driver
<6>[ 0.860391] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
<7>[ 0.860400] uhci_hcd 0000:00:1a.0: setting latency timer to 64
<6>[ 0.860405] uhci_hcd 0000:00:1a.0: UHCI Host Controller
<6>[ 0.860417] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 3
<6>[ 0.860456] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000070e0
<6>[ 0.860499] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
<6>[ 0.860503] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
<6>[ 0.860506] usb usb3: Product: UHCI Host Controller
<6>[ 0.860509] usb usb3: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd
<6>[ 0.860512] usb usb3: SerialNumber: 0000:00:1a.0
<6>[ 0.860594] usb usb3: configuration #1 chosen from 1 choice
<6>[ 0.860630] hub 3-0:1.0: USB hub found
<6>[ 0.860638] hub 3-0:1.0: 2 ports detected
<7>[ 0.861390] alloc irq_desc for 21 on node 0
<7>[ 0.861393] alloc kstat_irqs on node 0
<6>[ 0.861400] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) ->
IRQ 21
<7>[ 0.861407] uhci_hcd 0000:00:1a.1: setting latency timer to 64
<6>[ 0.861412] uhci_hcd 0000:00:1a.1: UHCI Host Controller
<6>[ 0.861424] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 4
<6>[ 0.861463] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000070c0
<6>[ 0.861505] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
<6>[ 0.861508] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
<6>[ 0.861512] usb usb4: Product: UHCI Host Controller
<6>[ 0.861515] usb usb4: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd
<6>[ 0.861518] usb usb4: SerialNumber: 0000:00:1a.1
<6>[ 0.861602] usb usb4: configuration #1 chosen from 1 choice
<6>[ 0.861640] hub 4-0:1.0: USB hub found
<6>[ 0.861648] hub 4-0:1.0: 2 ports detected
<6>[ 0.862391] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) ->
IRQ 23
<7>[ 0.862399] uhci_hcd 0000:00:1d.0: setting latency timer to 64
<6>[ 0.862404] uhci_hcd 0000:00:1d.0: UHCI Host Controller
<6>[ 0.862416] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 5
<6>[ 0.862446] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000070a0
<6>[ 0.862488] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
<6>[ 0.862491] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
<6>[ 0.862495] usb usb5: Product: UHCI Host Controller
<6>[ 0.862498] usb usb5: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd
<6>[ 0.862501] usb usb5: SerialNumber: 0000:00:1d.0
<6>[ 0.862579] usb usb5: configuration #1 chosen from 1 choice
<6>[ 0.862618] hub 5-0:1.0: USB hub found
<6>[ 0.862626] hub 5-0:1.0: 2 ports detected
<6>[ 0.863391] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) ->
IRQ 19
<7>[ 0.863399] uhci_hcd 0000:00:1d.1: setting latency timer to 64
<6>[ 0.863404] uhci_hcd 0000:00:1d.1: UHCI Host Controller
<6>[ 0.863415] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 6
<6>[ 0.863445] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00007080
<6>[ 0.863487] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
<6>[ 0.863491] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
<6>[ 0.863494] usb usb6: Product: UHCI Host Controller
<6>[ 0.863497] usb usb6: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd
<6>[ 0.863500] usb usb6: SerialNumber: 0000:00:1d.1
<6>[ 0.863579] usb usb6: configuration #1 chosen from 1 choice
<6>[ 0.863618] hub 6-0:1.0: USB hub found
<6>[ 0.863626] hub 6-0:1.0: 2 ports detected
<6>[ 0.864391] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) ->
IRQ 16
<7>[ 0.864399] uhci_hcd 0000:00:1d.2: setting latency timer to 64
<6>[ 0.864404] uhci_hcd 0000:00:1d.2: UHCI Host Controller
<6>[ 0.864415] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 7
<6>[ 0.864445] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00007060
<6>[ 0.864485] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
<6>[ 0.864489] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
<6>[ 0.864492] usb usb7: Product: UHCI Host Controller
<6>[ 0.864495] usb usb7: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd
<6>[ 0.864498] usb usb7: SerialNumber: 0000:00:1d.2
<6>[ 0.864581] usb usb7: configuration #1 chosen from 1 choice
<6>[ 0.864620] hub 7-0:1.0: USB hub found
<6>[ 0.864628] hub 7-0:1.0: 2 ports detected
<7>[ 0.865389] alloc irq_desc for 18 on node 0
<7>[ 0.865392] alloc kstat_irqs on node 0
<6>[ 0.865398] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) ->
IRQ 18
<7>[ 0.865408] uhci_hcd 0000:00:1d.3: setting latency timer to 64
<6>[ 0.865413] uhci_hcd 0000:00:1d.3: UHCI Host Controller
<6>[ 0.865424] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
number 8
<6>[ 0.865466] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00007040
<6>[ 0.865510] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
<6>[ 0.865514] usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
<6>[ 0.865517] usb usb8: Product: UHCI Host Controller
<6>[ 0.865520] usb usb8: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd
<6>[ 0.865523] usb usb8: SerialNumber: 0000:00:1d.3
<6>[ 0.865604] usb usb8: configuration #1 chosen from 1 choice
<6>[ 0.865642] hub 8-0:1.0: USB hub found
<6>[ 0.865650] hub 8-0:1.0: 2 ports detected
<6>[ 0.865724] Initializing USB Mass Storage driver...
<6>[ 0.865776] usbcore: registered new interface driver usb-storage
<6>[ 0.865779] USB Mass Storage support registered.
<6>[ 0.865820] usbcore: registered new interface driver libusual
<6>[ 0.865835] usbcore: registered new interface driver ums-alauda
<6>[ 0.865849] usbcore: registered new interface driver ums-cypress
<6>[ 0.865867] usbcore: registered new interface driver ums-datafab
<6>[ 0.865881] usbcore: registered new interface driver ums-freecom
<6>[ 0.865895] usbcore: registered new interface driver ums-isd200
<6>[ 0.865909] usbcore: registered new interface driver ums-jumpshot
<6>[ 0.865923] usbcore: registered new interface driver ums-karma
<6>[ 0.865938] usbcore: registered new interface driver ums-onetouch
<6>[ 0.865952] usbcore: registered new interface driver ums-sddr09
<6>[ 0.865968] usbcore: registered new interface driver ums-sddr55
<6>[ 0.865982] usbcore: registered new interface driver ums-usbat
<6>[ 0.866031] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64
irq 1,12
<6>[ 0.868890] i8042.c: Detected active multiplexing controller, rev 1.1.
<6>[ 0.871948] serio: i8042 KBD port at 0x60,0x64 irq 1
<6>[ 0.871956] serio: i8042 AUX0 port at 0x60,0x64 irq 12
<6>[ 0.871963] serio: i8042 AUX1 port at 0x60,0x64 irq 12
<6>[ 0.871967] serio: i8042 AUX2 port at 0x60,0x64 irq 12
<6>[ 0.871971] serio: i8042 AUX3 port at 0x60,0x64 irq 12
<6>[ 0.872054] mice: PS/2 mouse device common for all mice
<6>[ 0.872167] rtc_cmos 00:03: RTC can wake from S4
<6>[ 0.872219] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
<6>[ 0.872253] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
<6>[ 0.872272] cpuidle: using governor ladder
<6>[ 0.872275] cpuidle: using governor menu
<6>[ 0.872651] usbcore: registered new interface driver hiddev
<6>[ 0.872675] usbcore: registered new interface driver usbhid
<6>[ 0.872678] usbhid: v2.6:USB HID core driver
<6>[ 0.958874] TCP cubic registered
<6>[ 0.958975] NET: Registered protocol family 10
<6>[ 0.959621] lo: Disabled Privacy Extensions
<6>[ 0.960118] lib80211: common routines for IEEE802.11 drivers
<7>[ 0.960122] lib80211_crypt: registered algorithm 'NULL'
<6>[ 0.960136] Using IPI No-Shortcut mode
<7>[ 0.960236] PM: Checking image partition
/dev/disk/by-id/ata-ST9500325AS_5VE0FK88-part5
<6>[ 0.981623] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
<6>[ 1.288018] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6>[ 1.315020] usb 2-6: new high speed USB device using ehci_hcd and address
3
<6>[ 1.503976] usb 2-6: New USB device found, idVendor=064e, idProduct=a117
<6>[ 1.503980] usb 2-6: New USB device strings: Mfr=2, Product=1,
SerialNumber=3
<6>[ 1.503983] usb 2-6: Product: Acer HD Crystal Eye webcam
<6>[ 1.503986] usb 2-6: Manufacturer: SuYin
<6>[ 1.503989] usb 2-6: SerialNumber: CN1014-S36B-OV01-VA-R03.00.00
<6>[ 1.504078] usb 2-6: configuration #1 chosen from 1 choice
<6>[ 1.643622] ata1.00: ATA-8: ST9500325AS, 0001SDM1, max UDMA/133
<6>[ 1.643626] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
<6>[ 1.645555] ata1.00: configured for UDMA/133
<5>[ 1.656150] scsi 0:0:0:0: Direct-Access ATA ST9500325AS
0001 PQ: 0 ANSI: 5
<5>[ 1.656355] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500
GB/465 GiB)
<5>[ 1.656418] sd 0:0:0:0: [sda] Write Protect is off
<7>[ 1.656422] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[ 1.656454] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
<6>[ 1.656622] sda: sda1 sda2 sda3 < sda5 sda6 > sda4
<5>[ 1.691558] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[ 1.713012] usb 4-1: new full speed USB device using uhci_hcd and address
2
<6>[ 1.770795] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x12a0b1, caps:
0xa04711/0xa04000
<6>[ 1.808876] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio2/input/input1
<6>[ 1.856422] usb 4-1: New USB device found, idVendor=138a, idProduct=0001
<6>[ 1.856426] usb 4-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
<6>[ 1.856495] usb 4-1: configuration #1 chosen from 1 choice
<6>[ 1.961018] ata2: SATA link down (SStatus 0 SControl 300)
<6>[ 2.065016] usb 6-2: new low speed USB device using uhci_hcd and address
2
<6>[ 2.228372] usb 6-2: New USB device found, idVendor=046d, idProduct=c03e
<6>[ 2.228375] usb 6-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
<6>[ 2.228382] usb 6-2: Product: USB-PS/2 Optical Mouse
<6>[ 2.228385] usb 6-2: Manufacturer: Logitech
<6>[ 2.228462] usb 6-2: configuration #1 chosen from 1 choice
<6>[ 2.244632] input: Logitech USB-PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input2
<6>[ 2.244729] generic-usb 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10
Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2/input0
<6>[ 2.848026] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>[ 2.850901] ata5.00: ATAPI: PIONEER BD-ROM BDCTD01RS, 1.01, max UDMA/100
<6>[ 2.853974] ata5.00: configured for UDMA/100
<5>[ 2.877800] scsi 4:0:0:0: CD-ROM PIONEER BD-ROM BDCTD01RS
1.01 PQ: 0 ANSI: 5
<6>[ 3.182018] ata6: SATA link down (SStatus 0 SControl 300)
<7>[ 3.193020] PM: Resume from disk failed.
<4>[ 3.193037] registered taskstats version 1
<4>[ 3.193210] Magic number: 1:814:692
<6>[ 3.193293] rtc_cmos 00:03: setting system clock to 2009-11-26 16:41:30
UTC (1259253690)
<6>[ 3.193457] Freeing unused kernel memory: 464k freed
<6>[ 3.193678] Write protecting the kernel text: 4720k
<6>[ 3.193839] Write protecting the kernel read-only data: 2704k
<6>[ 3.232741] thermal LNXTHERM:01: registered as thermal_zone0
<6>[ 3.232755] ACPI: Thermal Zone [TZ00] (42 C)
<6>[ 3.233071] thermal LNXTHERM:02: registered as thermal_zone1
<6>[ 3.233084] ACPI: Thermal Zone [TZVR] (45 C)
<6>[ 3.233381] thermal LNXTHERM:03: registered as thermal_zone2
<6>[ 3.233399] ACPI: Thermal Zone [TZVL] (46 C)
<6>[ 3.233697] thermal LNXTHERM:04: registered as thermal_zone3
<6>[ 3.233710] ACPI: Thermal Zone [TZ01] (42 C)
<4>[ 3.243399] ACPI: SSDT bfc77c98 00223 (v01 PmRef Cpu0Ist 00003000 INTL
20051117)
<4>[ 3.244569] ACPI: SSDT bfc75598 00537 (v01 PmRef Cpu0Cst 00003001 INTL
20051117)
<7>[ 3.245586] Monitor-Mwait will be used to enter C-1 state
<7>[ 3.246014] Monitor-Mwait will be used to enter C-2 state
<4>[ 3.246020] Marking TSC unstable due to TSC halts in idle
<6>[ 3.246073] ACPI: CPU0 (power states: C1[C1] C2[C2])
<6>[ 3.246110] processor LNXCPU:00: registered as cooling_device0
<6>[ 3.246115] ACPI: Processor [CPU0] (supports 8 throttling states)
<4>[ 3.246901] ACPI: SSDT bfc76e18 001CF (v01 PmRef ApIst 00003000 INTL
20051117)
<4>[ 3.247923] ACPI: SSDT bfc77f18 0008D (v01 PmRef ApCst 00003000 INTL
20051117)
<6>[ 3.251189] ACPI: CPU1 (power states: C1[C1] C2[C2])
<6>[ 3.251216] processor LNXCPU:01: registered as cooling_device1
<6>[ 3.251221] ACPI: Processor [CPU1] (supports 8 throttling states)
<6>[ 3.252493] ACPI: CPU2 (power states: C1[C1] C2[C2])
<6>[ 3.252524] processor LNXCPU:02: registered as cooling_device2
<6>[ 3.252529] ACPI: Processor [CPU2] (supports 8 throttling states)
<6>[ 3.255422] ACPI: CPU3 (power states: C1[C1] C2[C2])
<6>[ 3.255441] processor LNXCPU:03: registered as cooling_device3
<6>[ 3.255445] ACPI: Processor [CPU3] (supports 8 throttling states)
<6>[ 3.258633] fan PNP0C0B:00: registered as cooling_device4
<6>[ 3.258642] ACPI: Fan [FAN0] (off)
<6>[ 3.265369] udev: starting version 146
<4>[ 3.500104] Clocksource tsc unstable (delta = -166080077 ns)
<7>[ 4.370312] PM: Marking nosave pages: 0000000000002000 - 0000000000006000
<7>[ 4.370315] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
<7>[ 4.370320] PM: Basic memory bitmaps created
<7>[ 4.426727] PM: Basic memory bitmaps freed
<6>[ 4.438285] PM: Starting manual resume from disk
<7>[ 4.438289] PM: Resume from partition 8:5
<7>[ 4.438292] PM: Checking hibernation image.
<7>[ 4.448327] PM: Resume from disk failed.
<5>[ 4.542236] REISERFS (device sda6): found reiserfs format "3.6" with
standard journal
<5>[ 4.542254] REISERFS (device sda6): using ordered data mode
<4>[ 4.542257] reiserfs: using flush barriers
<5>[ 4.543108] REISERFS (device sda6): journal params: device sda6, size
8192, journal first block 18, max trans len 1024, max batch 900, max commit age
30, max trans age 30
<5>[ 4.543390] REISERFS (device sda6): checking transaction log (sda6)
<5>[ 4.629300] REISERFS (device sda6): Using r5 hash to sort names
<7>[ 7.001000] preloadtrace: systemtap: 0.9.9/0.142, base: f7f46000, memory:
34052+77432+44320+13600 data+text+ctx+net, probes: 34
<6>[ 9.085232] udev: starting version 146
<6>[ 9.142724] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
<6>[ 9.142778] ACPI: Power Button [PWRF]
<6>[ 9.142857] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
<6>[ 9.142894] ACPI: Sleep Button [SLPB]
<6>[ 9.142958] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
<6>[ 9.142993] ACPI: Power Button [PWRB]
<6>[ 9.143085] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
<6>[ 9.143301] ACPI: Lid Switch [LID0]
<6>[ 9.143983] iTCO_vendor_support: vendor-support=0
<5>[ 9.147409] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[ 9.147454] scsi 4:0:0:0: Attached scsi generic sg1 type 5
<6>[ 9.153422] ATL1E 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
<7>[ 9.153438] ATL1E 0000:02:00.0: setting latency timer to 64
<6>[ 9.157157] ACPI: AC Adapter [ADP0] (on-line)
<6>[ 9.158244] ACPI: WMI: Mapper loaded
<6>[ 9.162308] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 9.199269] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
<6>[ 9.199368] iTCO_wdt: Found a ICH9M TCO device (Version=2,
TCOBASE=0x0460)
<6>[ 9.199439] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
<6>[ 9.224355] input: PC Speaker as /devices/platform/pcspkr/input/input7
<6>[ 9.226370] acer-wmi: Acer Laptop ACPI-WMI Extras
<6>[ 9.227477] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) ->
IRQ 18
<6>[ 9.236112] ACPI: Battery Slot [BAT0] (battery present)
<6>[ 9.256016] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux,
1.3.27kds
<6>[ 9.256019] iwlagn: Copyright(c) 2003-2009 Intel Corporation
<6>[ 9.256310] iwlagn 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ
19
<7>[ 9.256343] iwlagn 0000:05:00.0: setting latency timer to 64
<6>[ 9.256397] iwlagn 0000:05:00.0: Detected Intel Wireless WiFi Link
5100AGN REV=0x54
<6>[ 9.278703] acerhdf: Acer Aspire One Fan driver, v.0.5.13
<3>[ 9.278706] acerhdf: no Aspire One hardware found
<4>[ 9.280371] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2
cdda tray
<6>[ 9.280374] Uniform CD-ROM driver Revision: 3.20
<7>[ 9.280474] sr 4:0:0:0: Attached scsi CD-ROM sr0
<6>[ 9.282652] Linux video capture interface: v2.00
<7>[ 9.284755] alloc irq_desc for 22 on node 0
<7>[ 9.284759] alloc kstat_irqs on node 0
<6>[ 9.284768] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) ->
IRQ 22
<7>[ 9.284811] HDA Intel 0000:00:1b.0: setting latency timer to 64
<6>[ 9.286790] uvcvideo: Found UVC 1.00 device Acer HD Crystal Eye webcam
(064e:a117)
<6>[ 9.295111] input: Acer HD Crystal Eye webcam as
/devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input8
<6>[ 9.295182] usbcore: registered new interface driver uvcvideo
<6>[ 9.295186] USB Video Class driver (v0.1.0)
<6>[ 9.304258] iwlagn 0000:05:00.0: Tunable channels: 13 802.11bg, 24
802.11a channels
<7>[ 9.304327] alloc irq_desc for 30 on node 0
<7>[ 9.304330] alloc kstat_irqs on node 0
<7>[ 9.304351] iwlagn 0000:05:00.0: irq 30 for MSI/MSI-X
<6>[ 9.847115] usb 8-1: new full speed USB device using uhci_hcd and address
2
<6>[ 9.995352] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input9
<6>[ 10.002222] usb 8-1: New USB device found, idVendor=0a5c, idProduct=2101
<6>[ 10.002227] usb 8-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
<6>[ 10.002231] usb 8-1: Product: Acer Module
<6>[ 10.002234] usb 8-1: Manufacturer: Broadcom Corp
<6>[ 10.002341] usb 8-1: configuration #1 chosen from 1 choice
<6>[ 10.016349] Bluetooth: Core ver 2.15
<6>[ 10.016568] NET: Registered protocol family 31
<6>[ 10.016571] Bluetooth: HCI device and connection manager initialized
<6>[ 10.016575] Bluetooth: HCI socket layer initialized
<6>[ 10.019152] Bluetooth: Generic Bluetooth USB driver ver 0.5
<6>[ 10.019309] usbcore: registered new interface driver btusb
<7>[ 10.059021] phy0: Selected rate control algorithm 'iwl-agn-rs'
<6>[ 10.295266] Adding 4192924k swap on /dev/sda5. Priority:-1 extents:1
across:4192924k
<4>[ 10.527478] CE: hpet increasing min_delta_ns to 15000 nsec
<6>[ 10.955019] device-mapper: uevent: version 1.0.3
<6>[ 10.955306] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-devel@redhat.com
<6>[ 11.358404] loop: module loaded
<6>[ 11.577667] fuse init (API version 7.12)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
--
Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
bugzilla_noreply＠novell.com