[Bug 561778] New: esata hotplug not recognized, even on boot does not what expected
http://bugzilla.novell.com/show_bug.cgi?id=561778 http://bugzilla.novell.com/show_bug.cgi?id=561778#c0 Summary: esata hotplug not recognized, even on boot does not what expected Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Major Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers@forge.provo.novell.com ReportedBy: cyberbeat@gmx.de QAContact: qa@suse.de Found By: --- Blocker: --- User-Agent: Opera/9.80 (X11; Linux i686; U; en) Presto/2.2.15 Version/10.10 I have a notebook with esata support and an external esata disk. it is not recognized on hotplug. hotplug does work with windows vista, which is also installed on that notebook. on hotplug "tail -f /var/log/messages" outputs nothing and no "/dev/sdXX" entry is created. this is from "hwinfo --block" with device plugged in at boot time and mounted manually later: 37: IDE 400.0: 10600 Disk [Created at block.243] UDI: /org/freedesktop/Hal/devices/storage_serial_WDC_WD2500BEVT_00ZCT0_WD_WXE0A99N0986 Unique ID: WZeP.Pth5h5hSNtD Parent ID: w7Y8.2Teu3As8HDA SysFS ID: /class/block/sdb SysFS BusID: 4:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/host4/target4:0:0/4:0:0:0 Hardware Class: disk Model: "WDC WD2500BEVT-0" Vendor: "WDC" Device: "WD2500BEVT-0" Revision: "11.0" Serial ID: "WD-WXE0A99N0986" Driver: "ahci", "sd" Driver Modules: "ahci" Device File: /dev/sdb Device Files: /dev/sdb, /dev/block/8:16, /dev/disk/by-id/ata-WDC_WD2500BEVT-00ZCT0_WD-WXE0A99N0986, /dev/disk/by-id/scsi-SATA_WDC_WD2500BEVT-_WD-WXE0A99N0986, /dev/disk/by-path/pci-0000:00:1f.2-scsi-4:0:0:0 Device Number: block 8:16-8:31 Geometry (Logical): CHS 30401/255/63 Size: 488397168 sectors a 512 bytes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #28 (SATA controller) hwinfo --bios 01: None 00.0: 10105 BIOS [Created at bios.186] Unique ID: rdCR.lZF+r4EgHp4 Hardware Class: bios BIOS Keyboard LED Status: Scroll Lock: off Num Lock: on Caps Lock: off Base Memory: 639 kB PnP BIOS: TOS3F00 BIOS: extended read supported BIOS32 Service Directory Entry: 0xfcab6 SMBIOS Version: 2.5 BIOS Info: #0 Vendor: "TOSHIBA" Version: "Version 1.60" Date: "11/27/2008" Start Address: 0xe8000 ROM Size: 4096 kB Features: 0x0703000000003d29bb90 ISA supported PCI supported PCMCIA supported PnP supported BIOS flashable BIOS shadowing allowed VL-VESA supported CD boot supported Selectable boot supported EDD spec supported 1.2MB Toshiba Japanese Floppy supported 720kB Floppy supported Print Screen supported 8042 Keyboard Services supported Serial Services supported Printer Services supported ACPI supported USB Legacy supported BIOS Boot Spec supported F12 Network boot supported System Info: #1 Manufacturer: "TOSHIBA" Product: "PORTEGE A600" Version: "PPA61E-01700EGR" Serial: "29060919H" UUID: undefined, but settable Wake-up: 0x01 (Other) Board Info: #2 Manufacturer: "TOSHIBA" Product: "Portable PC" Version: "Version A0" Serial: "$$000001z0" Asset Tag: "0000000000" Chassis Info: #3 Manufacturer: "TOSHIBA" Version: "Version 1.0" Serial: "00000000" Asset Tag: "0000000000" Type: 0x0a (Notebook) Bootup State: 0x03 (Safe) Power Supply State: 0x03 (Safe) Thermal State: 0x03 (Safe) Security Status: 0x03 (None) Processor Info: #4 Socket: "IC1050" Socket Type: 0x01 (Other) Socket Status: Populated Type: 0x03 (CPU) Family: 0xbf (Other) Manufacturer: "Intel Corporation" Processor ID: 0x0000000000010676 Status: 0x01 (Enabled) Voltage: 1.0 V External Clock: 200 MHz Max. Speed: 1200 MHz Current Speed: 1200 MHz L1 Cache: #18 L2 Cache: #19 Type 5 Record: #9 Data 00: 05 14 09 00 03 04 01 01 0c 01 00 01 05 00 02 0a Data 10: 00 0b 00 04 Type 6 Record: #10 Data 00: 06 0c 0a 00 01 01 03 01 04 0a 0a 00 String 1: "Soldering" Type 6 Record: #11 Data 00: 06 0c 0b 00 01 23 03 01 05 0a 0a 00 String 1: "SO-DIMM" Cache Info: #18 Designation: "CPU Internal" Level: L1 State: Enabled Mode: 0x01 (Write Back) Location: 0x00 (Internal, Not Socketed) ECC: 0x05 (Single-bit) Type: 0x05 (Unified) Associativity: 0x07 (8-way Set-Associative) Max. Size: 128 kB Current Size: 128 kB Speed: 1 ns Supported SRAM Types: 0x0001 (Other) Current SRAM Type: 0x0001 (Other) Cache Info: #19 Designation: "CPU Internal" Level: L2 State: Enabled Mode: 0x01 (Write Back) Location: 0x00 (Internal, Not Socketed) ECC: 0x05 (Single-bit) Type: 0x05 (Unified) Associativity: 0x02 (Unknown) Max. Size: 3072 kB Current Size: 3072 kB Speed: 1 ns Supported SRAM Types: 0x0001 (Other) Current SRAM Type: 0x0001 (Other) Port Connector: #22 Type: 0xff (Other) External Designator: "EXTERNAL MONITOR PORT" External Connector: 0x07 (DB-15 pin female) Port Connector: #24 Type: 0x1f (Network Port) External Designator: "BUILT-IN LAN PORT" External Connector: 0x0b (RJ-45) Port Connector: #25 Type: 0x10 (USB) External Designator: "USB PORT" External Connector: 0x12 (Access Bus [USB]) Port Connector: #26 Type: 0x10 (USB) External Designator: "USB PORT" External Connector: 0x12 (Access Bus [USB]) Port Connector: #27 Type: 0x10 (USB) External Designator: "USB/eSATA PORT" External Connector: 0x12 (Access Bus [USB]) Port Connector: #28 Type: 0xff (Other) External Designator: "HEADPHONE JACK" External Connector: 0x1f (Mini-jack [headphones]) Port Connector: #29 Type: 0xff (Other) External Designator: "MICROPHONE JACK" External Connector: 0xff (Other) Port Connector: #30 Type: 0xff (Other) External Designator: "WIRELESS LAN" External Connector: 0xff (Other) Port Connector: #31 Type: 0xff (Other) External Designator: "BLUETOOTH" External Connector: 0xff (Other) Port Connector: #32 Type: 0xff (Other) External Designator: "DOCKING INTERFACE PORT" External Connector: 0xff (Other) System Slot: #56 Designation: "SD CARD" Type: 0x01 (Other) Bus Width: 0x01 (Other) Status: 0x04 (In Use) Length: 0x01 (Other) Slot ID: 1 Characteristics: 0x020c (3.3 V, Shared, Hot-Plug) System Slot: #59 Designation: "EXPRESS CARD" Type: 0xa5 (Other) Bus Width: 0x08 (Other) Status: 0x04 (In Use) Length: 0x01 (Other) Slot ID: 1 Characteristics: 0x0204 (3.3 V, Hot-Plug) On Board Devices: #88 Other: "USB" Video: "VIDEO" Ethernet: "ETHERNET" Sound: "SOUND" Other: "WIRELESS LAN" Other: "BLUETOOTH" Other: "WIRELESS WAN" OEM Strings: #89 PPA61E-01700EGR,PPA61EY01700E111/R09877GRV01 System Config Options (Jumpers & Switches) #105: TOSHIBA Type 15 Record: #128 Data 00: 0f 17 80 00 7c 00 00 00 00 00 04 01 00 00 00 00 Data 10: 03 00 00 00 00 00 02 Physical Memory Array: #129 Use: 0x03 (System memory) Location: 0x03 (Motherboard) Slots: 2 Max. Size: 5 GB ECC: 0x03 (None) Memory Device: #130 Location: "System 0" Bank: "CSA 0 & 1" Manufacturer: "AD00" Serial: "00001009" Part Number: "HYMP112S64CP6-S6" Memory Array: #129 Form Factor: 0x01 (Other) Type: 0x13 (Other) Type Detail: 0x0080 (Synchronous) Data Width: 64 bits Size: 1 GB Speed: 800 MHz Memory Device: #131 Location: "DIMM 1" Bank: "CSA 2 & 3" Manufacturer: "98FF" Serial: "FFFFFFFF" Memory Array: #129 Form Factor: 0x0d (SODIMM) Type: 0x13 (Other) Type Detail: 0x0080 (Synchronous) Data Width: 64 bits Size: 1 GB Speed: 800 MHz 32bit-Memory Error Info: #132 Type: 0x03 (OK) Granularity: 0x02 (Unknown) Operation: 0x02 (Unknown) Memory Array Mapping: #144 Memory Array: #129 Partition Width: 1 Start Address: 0x00000000 End Address: 0x000a0400 Memory Array Mapping: #145 Memory Array: #129 Partition Width: 1 Start Address: 0x00100000 End Address: 0x75d00400 Memory Device Mapping: #160 Memory Device: #130 Array Mapping: #144 Row: 1 Interleave Pos: 0 Interleaved Depth: 0 Start Address: 0x00000000 End Address: 0x000a0400 Memory Device Mapping: #161 Memory Device: #130 Array Mapping: #145 Row: 1 Interleave Pos: 0 Interleaved Depth: 0 Start Address: 0x00000000 End Address: 0x40000400 Memory Device Mapping: #162 Memory Device: #131 Array Mapping: #145 Row: 1 Interleave Pos: 0 Interleaved Depth: 0 Start Address: 0x40000000 End Address: 0x80000400 Pointing Device: #176 Type: 0x07 (Touch Pad) Interface: 0x04 (PS/2) Buttons: 2 Type 22 Record: #177 Data 00: 16 1a b1 00 01 02 03 04 05 06 b0 f4 30 2a 00 ff Data 10: 00 00 00 00 00 00 00 00 00 00 String 1: "1st Battery" String 2: "TOSHIBA" String 3: "12/24/08" String 4: "0000007605" String 5: "NC605D" Hardware Security: #183 Power-on Password: 0x00 (Disabled) Keyboard Password: 0x00 (Disabled) Admin Password: 0x00 (Disabled) Front Panel Reset: 0x00 (Disabled) Type 27 Record: #184 Data 00: 1b 0e b8 00 ff ff 65 01 00 00 00 00 00 80 Type 27 Record: #185 Data 00: 1b 0e b9 00 ff ff 68 01 00 00 00 00 00 80 Type 32 Record: #208 Data 00: 20 0b d0 00 00 00 00 00 00 00 00 Type 39 Record: #209 Data 00: 27 16 d1 00 00 00 00 00 00 00 00 00 00 80 8a 05 Data 10: ff ff b8 00 ff ff Type 129 Record: #216 Data 00: 81 08 d8 00 01 01 02 01 String 1: "Intel_ASF" String 2: "Intel_ASF_001" Type 130 Record: #217 Data 00: 82 14 d9 00 24 41 4d 54 01 01 00 00 01 a5 0b 02 Data 10: 00 00 00 00 Type 131 Record: #218 Data 00: 83 40 da 00 14 00 00 00 00 00 40 2a 05 00 00 00 Data 10: f8 00 17 29 00 00 00 00 09 00 00 00 00 00 04 00 Data 20: 73 04 08 00 01 00 01 02 c8 00 f5 10 00 00 00 01 Data 30: 32 42 00 00 af 03 00 00 76 50 72 6f 00 00 00 00 Chassis Info: #256 Manufacturer: "TOSHIBA" Version: "Version 1.0" Serial: "00000000" Asset Tag: "0000000000" Type: 0x12 (Expansion Chassis) Bootup State: 0x03 (Safe) Power Supply State: 0x03 (Safe) Thermal State: 0x03 (Safe) Security Status: 0x03 (None) Port Connector: #257 Type: 0xff (Other) External Designator: "EXTERNAL MONITOR PORT" External Connector: 0x07 (DB-15 pin female) Port Connector: #258 Type: 0x1f (Network Port) External Designator: "BUILT-IN LAN PORT" External Connector: 0x0b (RJ-45) Port Connector: #259 Type: 0x10 (USB) External Designator: "USB PORT" External Connector: 0x12 (Access Bus [USB]) Port Connector: #260 Type: 0x10 (USB) External Designator: "USB PORT" External Connector: 0x12 (Access Bus [USB]) Port Connector: #261 Type: 0x10 (USB) External Designator: "USB PORT" External Connector: 0x12 (Access Bus [USB]) Port Connector: #262 Type: 0x10 (USB) External Designator: "USB PORT" External Connector: 0x12 (Access Bus [USB]) Port Connector: #263 Type: 0xff (Other) External Designator: "DVI PORT" External Connector: 0xff (Other) Port Connector: #264 Type: 0xff (Other) External Designator: "DOCKING INTERFACE PORT" External Connector: 0xff (Other) Config Status: cfg=no, avail=yes, need=no, active=unknown Reproducible: Always Steps to Reproduce: 1. 2. 3. Expected Results: esata should behave exactly like usb, with the only difference, that it is faster. on windows I have the expected results. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=561778 http://bugzilla.novell.com/show_bug.cgi?id=561778#c Jeff Mahoney <jeffm@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Priority|P5 - None |P3 - Medium AssignedTo|kernel-maintainers@forge.pr |teheo@novell.com |ovo.novell.com | -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=561778 http://bugzilla.novell.com/show_bug.cgi?id=561778#c1 Tejun Heo <teheo@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |cyberbeat@gmx.de --- Comment #1 from Tejun Heo <teheo@novell.com> 2009-12-12 02:34:15 UTC --- Can you please attach /var/log/boot.msg? Also, when you plug in a esata device, does the kernel say anything in dmesg output? -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=561778 http://bugzilla.novell.com/show_bug.cgi?id=561778#c2 --- Comment #2 from H. Hansen <cyberbeat@gmx.de> 2009-12-14 17:30:00 UTC --- Created an attachment (id=332477) --> (http://bugzilla.novell.com/attachment.cgi?id=332477) boot log message on boot the device node is created, and I can manually mount it then. on hot(un)-plug no dmesg output and no action at all. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=561778 http://bugzilla.novell.com/show_bug.cgi?id=561778#c H. Hansen <cyberbeat@gmx.de> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|cyberbeat@gmx.de | -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=561778 http://bugzilla.novell.com/show_bug.cgi?id=561778#c3 Tejun Heo <teheo@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |cyberbeat@gmx.de --- Comment #3 from Tejun Heo <teheo@novell.com> 2009-12-15 01:14:29 UTC --- What does "cat /sys/class/scsi_host/host4/link_power_management_policy" say? If it says min_power, running the following command should re-enable hotplugging. echo max_performance > /sys/class/scsi_host/host4/link_power_management_policy Alternatively, you can issue manual scan by doing the following. echo "- - -" > /sys/class/scsi_host/host4/scan Can you please try the above two and report the result? -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=561778 http://bugzilla.novell.com/show_bug.cgi?id=561778#c4 --- Comment #4 from H. Hansen <cyberbeat@gmx.de> 2009-12-15 07:48:37 UTC --- # cat /sys/class/scsi_host/host4/link_power_management_policy max_performance The second one was surprising me this time: the disk was automatically detected the first time! So the second command did make no sense, I will report it next time, when it will not automatically detect it. But when it was automatically detected, and I did mount it by the kde4-device notifier, why did it want root-privileges? -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=561778 http://bugzilla.novell.com/show_bug.cgi?id=561778#c5 --- Comment #5 from H. Hansen <cyberbeat@gmx.de> 2009-12-15 07:51:38 UTC --- here the log from var/log/messages from hotplug Dec 15 08:43:39 linux-yl0a kernel: [ 410.946606] usb 1-6.7: USB disconnect, address 8 Dec 15 08:43:58 linux-yl0a kernel: [ 429.576655] ata5: exception Emask 0x10 SAct 0x0 SErr 0x4050000 action 0xe frozen Dec 15 08:43:58 linux-yl0a kernel: [ 429.576681] ata5: irq_stat 0x00400040, connection status changed Dec 15 08:43:58 linux-yl0a kernel: [ 429.576699] ata5: SError: { PHYRdyChg CommWake DevExch } Dec 15 08:43:58 linux-yl0a kernel: [ 429.576722] ata5: hard resetting link Dec 15 08:44:01 linux-yl0a kernel: [ 433.104325] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Dec 15 08:44:01 linux-yl0a kernel: [ 433.109270] ata5.00: ACPI _SDD failed (AE 0x5) Dec 15 08:44:06 linux-yl0a kernel: [ 438.104179] ata5: hard resetting link Dec 15 08:44:07 linux-yl0a kernel: [ 438.868313] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Dec 15 08:44:07 linux-yl0a kernel: [ 438.870198] ata5.00: ACPI _SDD failed (AE 0x5) Dec 15 08:44:07 linux-yl0a kernel: [ 438.870220] ata5.00: ACPI: failed the second time, disabled Dec 15 08:44:07 linux-yl0a kernel: [ 438.877386] ata5.00: ATA-8: WDC WD2500BEVT-00ZCT0, 11.01A11, max UDMA/133 Dec 15 08:44:07 linux-yl0a kernel: [ 438.877411] ata5.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32) Dec 15 08:44:07 linux-yl0a kernel: [ 438.879819] ata5.00: configured for UDMA/133 Dec 15 08:44:07 linux-yl0a kernel: [ 438.879859] ata5: EH complete Dec 15 08:44:07 linux-yl0a kernel: [ 438.880114] scsi 4:0:0:0: Direct-Access ATA WDC WD2500BEVT-0 11.0 PQ: 0 ANSI: 5 Dec 15 08:44:07 linux-yl0a kernel: [ 438.880604] sd 4:0:0:0: Attached scsi generic sg2 type 0 Dec 15 08:44:07 linux-yl0a kernel: [ 438.881924] sd 4:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) Dec 15 08:44:07 linux-yl0a kernel: [ 438.882716] sd 4:0:0:0: [sdb] Write Protect is off Dec 15 08:44:07 linux-yl0a kernel: [ 438.882736] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Dec 15 08:44:07 linux-yl0a kernel: [ 438.882805] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Dec 15 08:44:07 linux-yl0a kernel: [ 438.898303] sdb: sdb1 Dec 15 08:44:07 linux-yl0a kernel: [ 438.922594] sd 4:0:0:0: [sdb] Attached SCSI disk -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=561778 http://bugzilla.novell.com/show_bug.cgi?id=561778#c6 Tejun Heo <teheo@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |RESOLVED Info Provider|cyberbeat@gmx.de | Resolution| |INVALID --- Comment #6 from Tejun Heo <teheo@novell.com> 2009-12-15 08:07:50 UTC --- Eh... yeap, that looks about right. If the link power mode isn't changed to min_power (max_performance is the default), hotplug should just work. When hotplug doesn't work the next time, please check the link power mode. Some power related tools change the configuration. As for kde4-device, I don't have much idea. It probably handles ATA devices differently from USB ones. Or the problem could be that it doesn't know it's an (e)SATA not an internal port. Anyways, I really don't have much clue about that. Please feel free to file a separate bug report for that. I'm resolving this one as INVALID for now. If the problem happens again, please reopen. Thanks. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
participants (1)
-
bugzilla_noreply＠novell.com