http://bugzilla.novell.com/show_bug.cgi?id=555035 Summary: nm-applet mis-categorisation ... Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Minor Priority: P5 - None Component: GNOME AssignedTo: bnc-team-gnome@forge.provo.novell.com ReportedBy: mmeeks@novell.com QAContact: qa@suse.de Found By: --- It seems we get the wired ethernet items in this list in the wrong order. I have two ethernet adaptors: $ ip link list 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 100 link/ether 00:16:41:52:ef:ba brd ff:ff:ff:ff:ff:ff 3: irda0: <NOARP> mtu 2048 qdisc pfifo_fast state DOWN qlen 8 link/irda 5e:b6:4b:9e brd ff:ff:ff:ff 4: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000 link/ether 00:50:b6:00:1d:e0 brd ff:ff:ff:ff:ff:ff 5: wmaster0: <UP,LOWER_UP> mtu 0 qdisc pfifo_fast state UNKNOWN qlen 1000 link/ieee802.11 00:13:02:3a:ba:ad brd 00:00:00:00:00:00 6: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:13:02:3a:ba:ad brd ff:ff:ff:ff:ff:ff 7: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether ba:d1:98:02:df:7a brd ff:ff:ff:ff:ff:ff eth1 is the USB ASIX device with no cable plugged, yet the photo of the dialog shows both eth0 and eth1 both under the built-in wired connection [ of which there is clearly only one ;-]. I would expect them to be separated, and the eth1 device at the top marked 'disabled'. HTH. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.