https://bugzilla.novell.com/show_bug.cgi?id=825159 https://bugzilla.novell.com/show_bug.cgi?id=825159#c0 Summary: No network configured when phase 2 of a network install is started. Classification: openSUSE Product: openSUSE Factory Version: 13.1 Milestone 1 Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: per@computer.org QAContact: jsrain@suse.com Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux i686 on x86_64; rv:11.0) Gecko/20100101 Firefox/11.0 Hardware: "chestnut", HP Proliant DL380, 4Gb RAM Software: factory-snapshot Process: PXE boot, then network install over ssh. When the 2nd phase is started, the network is not configured. I see a network config file: /etc/sysconfig/network/ifcfg-enp3s1f0 But the three network interfaces are called eth0-1-2. 2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000 link/ether 00:02:b3:b9:43:d6 brd ff:ff:ff:ff:ff:ff inet 192.168.2.140/21 brd 192.168.7.255 scope global eth0 valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/ether 00:15:60:57:07:f1 brd ff:ff:ff:ff:ff:ff inet 192.168.2.140/21 brd 192.168.7.255 scope global eth1 valid_lft forever preferred_lft forever inet6 fe80::215:60ff:fe57:7f1/64 scope link valid_lft forever preferred_lft forever 4: eth2: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN qlen 1000 link/ether 00:15:60:57:07:f0 brd ff:ff:ff:ff:ff:ff Reproducible: Always -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.