https://bugzilla.novell.com/show_bug.cgi?id=216089 Summary: identifying devices on secondary ATA port times out 3 times on Fujitsu Siemens E-4010 notebook Product: openSUSE 10.2 Version: Beta 1 Platform: i686 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers@forge.provo.novell.com ReportedBy: jsj@jsj.dyndns.org QAContact: qa@suse.de During boot on ATA controller initialisation identification of secondary master DVD-ROM/CD-RW device failes three times. boot.msg shows: <7>libata version 2.00 loaded. <7>ata_piix 0000:00:1f.1: version 2.00ac6 <4>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) <4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 <6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 <7>PCI: Setting latency timer of device 0000:00:1f.1 to 64 <6>ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0x1810 irq 14 <6>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 <6>scsi0 : ata_piix <6>Time: acpi_pm clocksource has been installed. <6>input: PS/2 Mouse as /class/input/input2 <6>input: AlpsPS/2 ALPS GlidePoint as /class/input/input3 <6>ata1.00: ATA-5, max UDMA/100, 39070080 sectors: LBA <6>ata1.00: ata1: dev 0 multi count 16 <6>ata1.00: configured for UDMA/100 <6>scsi1 : ata_piix <6>ata2.00: ATAPI, max UDMA/33 <4>ata2.01: qc timeout (cmd 0xa1) <4>ata2.01: failed to IDENTIFY (I/O error, err_mask=0x4) <4>ata2: failed to recover some devices, retrying in 5 secs <4>ata2.01: qc timeout (cmd 0xa1) <4>ata2.01: failed to IDENTIFY (I/O error, err_mask=0x4) <4>ata2: failed to recover some devices, retrying in 5 secs <4>ata2.01: qc timeout (cmd 0xa1) <4>ata2.01: failed to IDENTIFY (I/O error, err_mask=0x4) <4>ata2: failed to recover some devices, retrying in 5 secs <6>ata2.00: configured for UDMA/33 <5> Vendor: ATA Model: IC25N020ATCS04-0 Rev: CA2O <5> Type: Direct-Access ANSI SCSI revision: 05 <5>SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB) <5>sda: Write Protect is off <7>sda: Mode Sense: 00 3a 00 00 <5>SCSI device sda: drive cache: write back <5>SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB) <5>sda: Write Protect is off <7>sda: Mode Sense: 00 3a 00 00 <5>SCSI device sda: drive cache: write back <6> sda: sda1 sda2 <5>sd 0:0:0:0: Attached scsi disk sda <5> Vendor: MATSHITA Model: UJDA750FDVD/CDRW Rev: 1.21 <5> Type: CD-ROM ANSI SCSI revision: 05 <6>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com <6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found <5>sd 0:0:0:0: Attached scsi generic sg0 type 0 <5>scsi 1:0:0:0: Attached scsi generic sg1 type 5 <4>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray <6>Uniform CD-ROM driver Revision: 3.20 <7>sr 1:0:0:0: Attached scsi CD-ROM sr0 The drive is finally started up, but boot process is delay for about 30s. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.