https://bugzilla.novell.com/show_bug.cgi?id=810093 https://bugzilla.novell.com/show_bug.cgi?id=810093#c0 Summary: oops after resume with sdcard inserted Classification: openSUSE Product: openSUSE 12.3 Version: Final Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers@forge.provo.novell.com ReportedBy: jw@suse.com QAContact: qa-bugs@suse.de Blocks: 357354 Found By: --- Blocker: --- After a resume from s2ram, I had to click away multiple windows offering the contents of the sdcard that I had left in the slot. After a while, I got an oops. Reproduced from dmesg: [247206.548325] Restarting tasks ... done. [247206.573279] video LNXVIDEO:00: Restoring backlight state [247206.636481] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [247206.693730] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [247206.751055] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [247206.808494] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [247206.841849] e1000e 0000:02:00.0: irq 47 for MSI/MSI-X [247206.942238] e1000e 0000:02:00.0: irq 47 for MSI/MSI-X [247206.942853] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [247207.064561] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [247207.706105] usb 5-1: new full-speed USB device number 33 using uhci_hcd [247207.862759] usb 5-1: New USB device found, idVendor=0a5c, idProduct=2110 [247207.862771] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [247207.862778] usb 5-1: Product: BCM2045B [247207.862784] usb 5-1: Manufacturer: Broadcom Corp [247214.379620] wlan0: authenticate with 14:7d:c5:13:ac:69 [247214.379782] wlan0: send auth to 14:7d:c5:13:ac:69 (try 1/3) [247214.381655] wlan0: authenticated [247214.387031] wlan0: associate with 14:7d:c5:13:ac:69 (try 1/3) [247214.389933] wlan0: RX AssocResp from 14:7d:c5:13:ac:69 (capab=0x431 status=0 aid=2) [247214.395258] wlan0: associated [247214.395307] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [247214.395401] cfg80211: Calling CRDA for country: GB [247214.407709] cfg80211: Regulatory domain changed to country: GB [247214.407717] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [247214.407720] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [247214.407723] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [247214.407726] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [247214.407729] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [247214.465306] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 14:7d:c5:13:ac:69 [248223.073283] mmc0: new SDHC card at address b368 [248223.073611] mmcblk0: mmc0:b368 USD 14.9 GiB [248223.075237] mmcblk0: p1 [248234.046193] mmc0: card b368 removed [248234.049013] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [248234.108141] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [248234.171008] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [248234.231084] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [248234.288734] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [248246.346250] mmc0: new SDHC card at address b368 [248246.346518] mmcblk0: mmc0:b368 USD 14.9 GiB [248246.348265] mmcblk0: p1 [248266.970210] mmc0: card b368 removed [248266.975011] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [248267.037032] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [248267.097825] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [248267.190150] mmc0: new SDHC card at address b368 [248267.195059] mmcblk0: mmc0:b368 USD 14.9 GiB [248267.197176] mmcblk0: p1 [248268.516277] mmc0: card b368 removed [248268.523010] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [248268.539083] VFS: Busy inodes after unmount of mmcblk0p1. Self-destruct in 5 seconds. Have a nice day... [248268.541063] BUG: unable to handle kernel paging request at 20736574 [248268.541135] IP: [<c035b4d0>] iput+0x60/0x160 [248268.541183] *pdpt = 0000000031617001 *pde = 0000000000000000 [248268.541240] Oops: 0000 [#1] PREEMPT SMP [248268.541283] Modules linked in: usb_storage tun cdc_acm ftdi_sio usbserial nls_iso8859_1 nls_cp437 btrfs zlib_deflate libcrc32c ufs qnx4 hfsplus hfs minix vfat msdos fat jfs xfs reiserfs dm_mod fuse af_packet cpufreq_conservative cpufreq_userspace cpufreq_powersave btusb bluetooth snd_hda_codec_analog thinkpad_acpi snd_hda_intel snd_hda_codec snd_hwdep snd_pcm acpi_cpufreq mperf coretemp snd_seq snd_timer kvm_intel kvm iTCO_wdt iTCO_vendor_support mmc_block snd_seq_device arc4 iwl3945 iwlegacy mac80211 sdhci_pci pcmcia nsc_ircc cfg80211 snd sdhci lpc_ich sg mmc_core microcode irda rfkill mfd_core yenta_socket pcmcia_rsrc pcmcia_core i2c_i801 pcspkr firewire_ohci firewire_core crc_itu_t soundcore crc_ccitt ac battery e1000e snd_page_alloc tpm_tis tpm tpm_bios autofs4 thermal i915 drm_kms_helper drm i2c_algo_bit processor button video thermal_sys scsi_dh_alua scsi_dh_rdac scsi_dh_emc scsi_dh_hp_sw scsi_dh ata_generic pata_acpi ata_piix [248268.542008] Pid: 1084, comm: gvfsd-trash Not tainted 3.7.10-1.1-desktop #1 LENOVO 1704R8G/1704R8G [248268.542008] EIP: 0060:[<c035b4d0>] EFLAGS: 00010246 CPU: 0 [248268.542008] EIP is at iput+0x60/0x160 [248268.542008] EAX: 00000001 EBX: cb9f58c8 ECX: 00000001 EDX: cb9f591c [248268.542008] ESI: cb9f591c EDI: f1dc5000 EBP: 20736564 ESP: f1bb1f6c [248268.542008] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [248268.542008] CR0: 8005003b CR2: 20736574 CR3: 31ba1000 CR4: 000007f0 [248268.542008] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [248268.542008] DR6: ffff0ff0 DR7: 00000400 [248268.542008] Process gvfsd-trash (pid: 1084, ti=f1bb0000 task=f1baf2b0 task.ti=f1bb0000) [248268.542008] Stack: [248268.542008] e916a450 f1e14480 e916a464 f1e144bc c037d839 00000000 cb9f58c8 f1660180 [248268.542008] e916a450 f1e144cc 00000001 c037f2dc 00000001 00000006 08c0b078 08c02738 [248268.542008] f1bb0000 c0707ee0 00000006 00000061 b772e000 08c0b078 08c02738 08c1a910 [248268.542008] Call Trace: [248268.542008] [<c037d839>] fsnotify_destroy_mark+0x149/0x170 [248268.542008] [<c037f2dc>] sys_inotify_rm_watch+0x5c/0xa0 [248268.542008] [<c0707ee0>] syscall_call+0x7/0xb [248268.542008] [<b73c9db1>] 0xb73c9db0 [248268.542008] Code: 1a 8b 1c 24 8b 74 24 04 8b 7c 24 08 8b 6c 24 0c 83 c4 10 c3 8d b4 26 00 00 00 00 8b 7b 1c f6 43 68 08 8b 6f 20 0f 85 d1 00 00 00 <8b> 55 10 85 d2 0f 84 7d 00 00 00 89 d8 ff d2 85 c0 0f 85 89 00 [248268.542008] EIP: [<c035b4d0>] iput+0x60/0x160 SS:ESP 0068:f1bb1f6c [248268.542008] CR2: 0000000020736574 [248268.594807] ---[ end trace 4ccd4b7377324790 ]--- [248268.594813] note: gvfsd-trash[1084] exited with preempt_count 1 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.