[Bug 331809] New: Huawei E220 (UMTS modem) doesn't work in 10.3
https://bugzilla.novell.com/show_bug.cgi?id=331809 Summary: Huawei E220 (UMTS modem) doesn't work in 10.3 Product: openSUSE 10.3 Version: Final Platform: x86-64 OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers@forge.provo.novell.com ReportedBy: SchwartzkopffD@Alte-Leipziger.de QAContact: qa@suse.de Found By: --- I can't access the internet because my Huawei E220 doesn't work in 10.3 anymore after update (new install) from 10.2. In 10.2 I had to use the follwing commands to get access to this modem: # modprobe -r usb-storage # modprobe usbserial vendor=0x12d1 product=0x1003 or udev rules which block the "internal cdrom" of the modem and install the usbserial driver. After the last modprobe I got /dev/ttyUSB0 and /dev/ttyUSB1 and I can use kinternet or minicom to access this modem with AT commands. In 10.3 the modem is recognized without any commands but I can't send any AT commands to /dev/ttyUSB0 or /dev/ttyUSB1. minicom simply doesn't respond and I must kill it. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=331809 Dirk Schwartzkopff <SchwartzkopffD@Alte-Leipziger.de> changed: What |Removed |Added ---------------------------------------------------------------------------- Severity|Normal |Major -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=331809#c1 --- Comment #1 from Dirk Schwartzkopff <SchwartzkopffD@Alte-Leipziger.de> 2007-10-10 04:20:07 MST --- It works just fine on ppc64 hardware (ps3). I am trying to install 10.3 on my other computers (ppc32 and i386). Here is the debug log of the error: usbcore: registered new interface driver usbserial drivers/usb/serial/usb-serial.c: Had to override the open usb serial operation with the generic one. drivers/usb/serial/usb-serial.c: Had to override the write usb serial operation with the generic one. drivers/usb/serial/usb-serial.c: Had to override the close usb serial operation with the generic one. drivers/usb/serial/usb-serial.c: Had to override the write_room usb serial operation with the generic one. drivers/usb/serial/usb-serial.c: Had to override the chars_in_buffer usb serial operation with the generic one. drivers/usb/serial/usb-serial.c: Had to override the read_bulk_callback usb serial operation with the generic one. drivers/usb/serial/usb-serial.c: Had to override the write_bulk_callback usb serial operation with the generic one. drivers/usb/serial/usb-serial.c: USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core usb 1-2: new full speed USB device using ohci_hcd and address 2 usb 1-2: new device found, idVendor=12d1, idProduct=1003 usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-2: Product: HUAWEI Mobile usb 1-2: Manufacturer: HUAWEI Technologies usb 1-2: configuration #1 chosen from 1 choice drivers/usb/serial/usb-serial.c: Had to override the read_bulk_callback usb serial operation with the generic one. drivers/usb/serial/usb-serial.c: Had to override the write_bulk_callback usb serial operation with the generic one. drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port) drivers/usb/serial/usb-serial.c: static descriptor matches drivers/usb/serial/usb-serial.c: found bulk in on endpoint 0 drivers/usb/serial/usb-serial.c: found bulk out on endpoint 1 option 1-2:1.0: GSM modem (1-port) converter detected drivers/usb/serial/usb-serial.c: usb_serial_probe - setting up 1 port structures for this device drivers/usb/serial/usb-serial.c: get_free_serial 1 drivers/usb/serial/usb-serial.c: get_free_serial - minor base = 0 drivers/usb/serial/usb-serial.c: usb_serial_probe - registering ttyUSB0 usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0 usbcore: registered new interface driver option drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.70 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 drivers/usb/serial/usb-serial.c: serial_open drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_tiocmget - port 0 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5402 drivers/usb/serial/usb-serial.c: serial_set_termios - port 0 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_tiocmget - port 0 drivers/usb/serial/usb-serial.c: serial_tiocmset - port 0 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5402 drivers/usb/serial/usb-serial.c: serial_set_termios - port 0 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5402 drivers/usb/serial/usb-serial.c: serial_set_termios - port 0 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5402 drivers/usb/serial/usb-serial.c: serial_set_termios - port 0 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x540b drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5402 drivers/usb/serial/usb-serial.c: serial_set_termios - port 0 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5402 drivers/usb/serial/usb-serial.c: serial_set_termios - port 0 drivers/usb/serial/usb-serial.c: serial_ioctl - port 0, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_write - port 0, 1 byte(s) drivers/usb/serial/usb-serial.c: usb_serial_port_work - port 0 hub 1-0:1.0: port 2 disabled by hub (EMI?), re-enabling... usb 1-2: USB disconnect, address 2 drivers/usb/serial/usb-serial.c: usb_serial_disconnect option 1-2:1.0: device disconnected usb 1-2: new full speed USB device using ohci_hcd and address 4 usb 1-2: new device found, idVendor=12d1, idProduct=1003 usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-2: Product: HUAWEI Mobile usb 1-2: Manufacturer: HUAWEI Technologies usb 1-2: configuration #1 chosen from 1 choice drivers/usb/serial/usb-serial.c: static descriptor matches drivers/usb/serial/usb-serial.c: found bulk in on endpoint 0 drivers/usb/serial/usb-serial.c: found bulk out on endpoint 1 option 1-2:1.0: GSM modem (1-port) converter detected drivers/usb/serial/usb-serial.c: usb_serial_probe - setting up 1 port structures for this device drivers/usb/serial/usb-serial.c: get_free_serial 1 drivers/usb/serial/usb-serial.c: get_free_serial - minor base = 1 drivers/usb/serial/usb-serial.c: usb_serial_probe - registering ttyUSB1 usb 1-2: GSM modem (1-port) converter now attached to ttyUSB1 drivers/usb/serial/usb-serial.c: serial_close - port 0 drivers/usb/serial/usb-serial.c: destroy_serial - GSM modem (1-port) drivers/usb/serial/usb-serial.c: return_serial option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 drivers/usb/serial/usb-serial.c: port_release - ttyUSB0 drivers/usb/serial/usb-serial.c: serial_open drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_tiocmget - port 1 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5402 drivers/usb/serial/usb-serial.c: serial_set_termios - port 1 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_tiocmget - port 1 drivers/usb/serial/usb-serial.c: serial_tiocmset - port 1 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5402 drivers/usb/serial/usb-serial.c: serial_set_termios - port 1 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5402 drivers/usb/serial/usb-serial.c: serial_set_termios - port 1 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5402 drivers/usb/serial/usb-serial.c: serial_set_termios - port 1 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x540b drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5402 drivers/usb/serial/usb-serial.c: serial_set_termios - port 1 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5402 drivers/usb/serial/usb-serial.c: serial_set_termios - port 1 drivers/usb/serial/usb-serial.c: serial_ioctl - port 1, cmd 0x5401 drivers/usb/serial/usb-serial.c: serial_write - port 1, 1 byte(s) drivers/usb/serial/usb-serial.c: serial_write - port 1, 1 byte(s) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=331809#c2 Greg Kroah-Hartman <gregkh@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution| |INVALID --- Comment #2 from Greg Kroah-Hartman <gregkh@novell.com> 2007-10-10 09:52:25 MST --- Do not add a new device id to the usb-serial module, this device should automatically work with the option driver with no need for any manual configuration of the kernel. So again, don't use the generic usb-serial module, your throughput will be slower and you might loose data... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
su Passwort: # lsmod|grep usb usbcore 155560 3 ehci_hcd,ohci_hcd "plug in HUAWEI E220" # dmesg .. usb 1-2: new full speed USB device using ohci_hcd and address 2 usb 1-2: new device found, idVendor=12d1, idProduct=1003 usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-2: Product: HUAWEI Mobile usb 1-2: Manufacturer: HUAWEI Technologies usb 1-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)
https://bugzilla.novell.com/show_bug.cgi?id=331809#c3 Dirk Schwartzkopff <SchwartzkopffD@Alte-Leipziger.de> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |SchwartzkopffD@Alte-Leipziger.de Status|RESOLVED |REOPENED Resolution|INVALID | --- Comment #3 from Dirk Schwartzkopff <SchwartzkopffD@Alte-Leipziger.de> 2007-10-11 03:58:44 MST --- Sorry. The solution doesn't work for me. Here is the complete workflow for a fresh installed x86-64 10.3 without changed udev rules after reboot: option 1-2:1.0: GSM modem (1-port) converter detected usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0 usbcore: registered new interface driver option drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. # lsmod|grep usb usb_storage 102816 0 ide_core 165648 1 usb_storage usbserial 52944 1 option usbcore 155560 6 usb_storage,option,usbserial,ehci_hcd,ohci_hcd scsi_mod 176536 5 usb_storage,sr_mod,sg,sd_mod,libata # ls /dev/ttyUSB* /dev/ttyUSB0 # ln -s /dev/ttyUSB0 /dev/modem # minicom minicom: WARNING: configuration file not found, using defaults Welcome to minicom 2.2 OPTIONS: I18n Compiled on Sep 21 2007, 20:31:22. Port /dev/modem Press CTRL-A Z for help on special keys other bash> dmesg .. usb 1-2: new full speed USB device using ohci_hcd and address 2 usb 1-2: new device found, idVendor=12d1, idProduct=1003 usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-2: Product: HUAWEI Mobile usb 1-2: Manufacturer: HUAWEI Technologies usb 1-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port) option 1-2:1.0: GSM modem (1-port) converter detected usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0 usbcore: registered new interface driver option drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb 1-2: USB disconnect, address 2 option 1-2:1.0: device disconnected usb 1-2: new full speed USB device using ohci_hcd and address 3 usb 1-2: new device found, idVendor=12d1, idProduct=1003 usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-2: Product: HUAWEI Mobile usb 1-2: Manufacturer: HUAWEI Technologies usb 1-2: configuration #1 chosen from 1 choice option 1-2:1.0: GSM modem (1-port) converter detected usb 1-2: GSM modem (1-port) converter now attached to ttyUSB1 <CTRL> A Q in minicom # dmesg .. usb 1-2: GSM modem (1-port) converter now attached to ttyUSB1 option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 "remove HUAWEI E220" -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=331809#c4 Greg Kroah-Hartman <gregkh@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|kernel-maintainers@forge.provo.novell.com |gregkh@novell.com Status|REOPENED |ASSIGNED --- Comment #4 from Greg Kroah-Hartman <gregkh@novell.com> 2007-10-11 10:14:58 MST --- Ugh, I forgot about these HUAWEI devices, they need a quirk to get this all right... Let me go dig in the upstream tree to see what I can find... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=331809#c5 --- Comment #5 from Dirk Schwartzkopff <SchwartzkopffD@Alte-Leipziger.de> 2007-10-16 11:04:28 MST --- Thanks Greg. I made some tests with 10.3: 1) Playstation 3 (ppc64): Works out of the box! 2) ibook G4 (ppc32): Works after the use of huaweiAktBbo 3) x86-64: Doesn't work at all (even with huaweiAktBbo) 4) i386: Doesn't work because of USB 1.1. I'll try to test a PC with USB 2.0 in the next days. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=331809#c6 --- Comment #6 from Dirk Schwartzkopff <SchwartzkopffD@Alte-Leipziger.de> 2007-11-07 06:29:57 MST --- Update: x86-64 and i386 are working after the use of huaweiAktBbo (started with root authority). (http://www.kanoistika.sk/bobovsky/archiv/umts/huaweiAktBbo.c) I've no idea why the playstation works and the other processors/kernels must use huaweiAktBbo. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=331809#c7 --- Comment #7 from Greg Kroah-Hartman <gregkh@novell.com> 2007-11-20 16:43:47 MST --- Created an attachment (id=184142) --> (https://bugzilla.novell.com/attachment.cgi?id=184142) updated version of huaweiAktBbo.c Can you try this version of the file to see if it fixes the problem? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=331809 Greg Kroah-Hartman <gregkh@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Attachment #184142|text/x-csrc |text/plain mime type| | -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=331809#c8 Greg Kroah-Hartman <gregkh@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |tambet@novell.com --- Comment #8 from Greg Kroah-Hartman <gregkh@novell.com> 2007-11-20 16:44:15 MST --- *** Bug 340978 has been marked as a duplicate of this bug. *** https://bugzilla.novell.com/show_bug.cgi?id=340978 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=331809 Greg Kroah-Hartman <gregkh@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO Info Provider| |SchwartzkopffD@Alte-Leipziger.de -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=331809#c9 --- Comment #9 from Dirk Schwartzkopff <SchwartzkopffD@Alte-Leipziger.de> 2007-11-22 03:12:48 MST --- Thanks Greg. Your updated version of huaweiAktBbo.c is working fine. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=331809 User tschaefer@t-online.de added comment https://bugzilla.novell.com/show_bug.cgi?id=331809#c10 Thomas Schäfer <tschaefer@t-online.de> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |tschaefer@t-online.de --- Comment #10 from Thomas Schäfer <tschaefer@t-online.de> 2007-12-18 03:13:27 MST --- I cannot confirm that. After Installation (10.3/x86/32) and online update (2007-12-17) I am not able to use the huawei E220 modem anymore. Both versions of huaweiAktBbo don't work. The option-module loads, but there are no ttys. Now I am recovering the 10.2 system from image-backup. The old system has needed a small adding to option.c, but together with huaweiAktBbo it worked. I don't know what is wrong in 10.3. Regards, Thomas -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=331809 User jarl@softace.dk added comment https://bugzilla.novell.com/show_bug.cgi?id=331809#c11 --- Comment #11 from Jarl Friis <jarl@softace.dk> 2008-01-22 13:16:47 MST --- (In reply to comment #7 from Greg Kroah-Hartman)
Created an attachment (id=184142) --> (https://bugzilla.novell.com/attachment.cgi?id=184142) [details] updated version of huaweiAktBbo.c
Can you try this version of the file to see if it fixes the problem?
Could you ellaborate on the difference, to me it seems that there is no functional difference, removing a bit of commented-out code and disabled code, and a bit of reformatting, but no functional changes... -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=331809 User jarl@softace.dk added comment https://bugzilla.novell.com/show_bug.cgi?id=331809#c12 Jarl Friis <jarl@softace.dk> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED Info Provider|SchwartzkopffD@Alte-Leipziger.de | --- Comment #12 from Jarl Friis <jarl@softace.dk> 2008-01-22 13:19:54 MST --- (In reply to comment #7 from Greg Kroah-Hartman)
Created an attachment (id=184142) --> (https://bugzilla.novell.com/attachment.cgi?id=184142) [details] updated version of huaweiAktBbo.c
Can you try this version of the file to see if it fixes the problem?
The info was provided in comment 9 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=331809 User jarl@softace.dk added comment https://bugzilla.novell.com/show_bug.cgi?id=331809#c13 --- Comment #13 from Jarl Friis <jarl@softace.dk> 2008-01-22 13:22:49 MST --- Here is another user experience report. on AMD64 installation: plging in the device gives ttyUSB0 Running huaweiAktBbo as root gives another two devices ttyUSB1 and ttyUSB2. So using huaweiAktBbo is still a necessary workaround to make it work. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=331809 User gregkh@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=331809#c14 Greg Kroah-Hartman <gregkh@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |RESOLVED Resolution| |FIXED --- Comment #14 from Greg Kroah-Hartman <gregkh@novell.com> 2008-03-03 13:14:59 MST --- Ok, I've now fixed the device ids, and this should work properly in the next kernel-of-the-day release. If not, can you test the 11.0 alphas and let me know if that does work properly (it's supposed to be fixed there as well.) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
participants (1)
-
bugzilla_noreply＠novell.com