http://bugzilla.opensuse.org/show_bug.cgi?id=967031 http://bugzilla.opensuse.org/show_bug.cgi?id=967031#c2 Stakanov Schufter changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |jsmeix@suse.com Flags| |needinfo?(jsmeix@suse.com) --- Comment #2 from Stakanov Schufter --- Install is a Leap 42.1 install from scratch. Printer is branched local via USB. Same setup (hardware, connector etc) is working on the same machine (dual boot) with tumbleweed without problem. Note: only anomaly when printout fail in e.g. libreoffice, you are not proposed the print to file as alternative (although okular is installed). A complete force update of all package for cups, sane and ghostscript did not change a thing. The print from yast with testpage works problem free. In the queue you will find the aborted job from previous attemps as "filter failed". So, let us see: Printer Lexmark C543dn Product page: http://www.lexmark.com/US/en/catalog/product.jsp?prodId=4609 lpstat -v dispositivo per lexmarklexmarkc543: usb://Lexmark/C543?serial=94545KC egrep 'NickName|cupsFilter' /etc/cups/ppd/lexmarklexmarkc543.ppd *ShortNickName: "Lexmark C543" *NickName: "Lexmark C543" Printer setup tool: yast printer setup tool Command line: echo Hello | lp -d lexmarklexmarkc543 request id è lexmarklexmarkc543-59 (0 file(s)) Does not print anything. echo A4 | a2ps -1 -j -M A4 -o- | lp -d lexmarklexmarkc543 [stdin (normale): 1 pagina su 1 foglio] [Totale: 1 pagina su 1 foglio] inviato sullo standard output request id è lexmarklexmarkc543-62 (0 file(s) Result: does print an empty page with a frame A4 written in it and the current date below. echo Letter | a2ps -1 -j -M Letter -o- | lp -d lexmarklexmarkc543 [stdin (normale): 1 pagina su 1 foglio] [Totale: 1 pagina su 1 foglio] inviato sullo standard output request id è lexmarklexmarkc543-63 (0 file(s)) Result: fails to print. Printer "clicks" to get ready but does not print. echo -e 'One\fTwo' | lp -d lexmarklexmarkc543 request id è lexmarklexmarkc543-64 (0 file(s)) Result: does not print, "click" but then steps back to standby. echo -e 'A4-1\fA4-2' | a2ps -1 -j -M A4 -o- | lp -d lexmarklexmarkc543 [stdin (normale): 2 pagine su 2 fogli] [Totale: 2 pagine su 2 fogli] inviato sullo standard output request id è lexmarklexmarkc543-65 (0 file(s)) Result: does not print, "click" to get ready then standby echo -e 'Letter-1\fLetter-2' | a2ps -1 -j -M Letter -o- | lp -d lexmarklexmarkc543 [stdin (normale): 2 pagine su 2 fogli] [Totale: 2 pagine su 2 fogli] inviato sullo standard output request id è lexmarklexmarkc543-66 (0 file(s)) Result: Does print, two pages, one sided each with letter1 / letter 2 respectively. Printing from Libreoffice fails. Setting "automatic to pdf" gives a long list of the same error: QPainter::begin: Paint device returned engine == 0, type: 3 QPainter::save: Painter not active QPainter::setRenderHint: Painter must be active to set rendering hints QPainter::setBrush: Painter not active QPainter::setPen: Painter not active QPainter::translate: Painter not active QPainter::restore: Unbalanced save/restore QPainter::begin: Paint device returned engine == 0, type: 3 QPainter::save: Painter not active QPainter::setRenderHint: Painter must be active to set rendering hints QPainter::setBrush: Painter not active QPainter::setPen: Painter not active QPainter::translate: Painter not active QPainter::restore: Unbalanced save/restore QPainter::begin: Paint device returned engine == 0, type: 3 and so on. Printing fails. Printing with "Postscript - livello dal driver" Color 24 bit this is also a fail. Nothing happens, filter fails. Error message is identical (reading this from CLI when starting libreoffice from CLI. I tried then the direct export to pdf from libreoffice but interestingly it fails (produces a file that ocular cannot open). Tried to open with carbon and it complains that the it is "impossible to create the filter extension". GIMP 2.8 fails to open the file with "unknown file tipe". Please tell me how to obtain any further information if you need it, as I followed (and exhausted) the link you gave me. -- You are receiving this mail because: You are on the CC list for the bug.

http://bugzilla.opensuse.org/show_bug.cgi?id=967031 http://bugzilla.opensuse.org/show_bug.cgi?id=967031#c5 Stakanov Schufter changed: What |Removed |Added ---------------------------------------------------------------------------- Flags|needinfo?(stakanov@freenet. | |de) | --- Comment #5 from Stakanov Schufter --- I did come insofar to a solution that there is a wrong default setting in libreoffice making reference to pdf while you have to set: use ppd from driver. But, there is still an issue. Whenever you change the default name of the printer on that system it stops to work immediately. You have then to erase the printer and do the automatic setup again. -- You are receiving this mail because: You are on the CC list for the bug.