[Bug 789204] New: smartctl 5.42: Unknown USB bridge [0x1058:0x0748 (0x1019)] - openSUSE Bugs - openSUSE Mailing Lists

newer
[Bug 790044] New: smartmontools...

[Bug 789204] New: smartctl 5.42: Unknown USB bridge [0x1058:0x0748 (0x1019)]

older
[Bug 793459] New: Update for...

bugzilla_noreply＠novell.com

12 Nov 2012 12 Nov '12

07:35

https://bugzilla.novell.com/show_bug.cgi?id=789204 https://bugzilla.novell.com/show_bug.cgi?id=789204#c0 Summary: smartctl 5.42: Unknown USB bridge [0x1058:0x0748 (0x1019)] Classification: openSUSE Product: openSUSE 12.1 Version: Final Platform: i686 OS/Version: openSUSE 12.1 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: Ulrich.Windl@rz.uni-regensburg.de QAContact: qa-bugs@suse.de Found By: --- Blocker: --- User-Agent: Mozilla/5.0 (X11; Linux i686; rv:16.0) Gecko/20100101 Firefox/16.0 When connecting a Western Digital "MyPassport" external USB .30 disk drive, smartctl refuses to talk to the disk: # smartctl -a /dev/sdc smartctl 5.42 2011-10-20 r3458 [i686-linux-3.4.11-2.16-default] (SUSE RPM) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net /dev/sdc: Unknown USB bridge [0x1058:0x0748 (0x1019)] Smartctl: please specify device type with the -d option. Use smartctl -h to get a usage summary Seen in OpenSUSE 12.1 and 12.2 Reproducible: Always Steps to Reproduce: 1. Connect "WD MyPassport 1TB" external USB drive (2.5") 2. Run smartctl Actual Results: # smartctl -a /dev/sdc smartctl 5.42 2011-10-20 r3458 [i686-linux-3.4.11-2.16-default] (SUSE RPM) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net /dev/sdc: Unknown USB bridge [0x1058:0x0748 (0x1019)] Smartctl: please specify device type with the -d option. Use smartctl -h to get a usage summary Expected Results: SMART values. WD offers a "WD SES Driver" for Windows; maybe that's a clue what's needed. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

Reply

Sign in to reply online Use email software

Show replies by date

bugzilla_noreply＠novell.com

15 Nov 15 Nov

12:37

New subject: [Bug 789204] smartctl 5.42: Unknown USB bridge [0x1058:0x0748 (0x1019)]

https://bugzilla.novell.com/show_bug.cgi?id=789204 https://bugzilla.novell.com/show_bug.cgi?id=789204#c Jiaying ren changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |jren@suse.com AssignedTo|bnc-team-screening@forge.pr |sbrabec@suse.com |ovo.novell.com | -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

Reply

Sign in to reply online Use email software

bugzilla_noreply＠novell.com

17:18

New subject: [Bug 789204] smartctl 5.42: Unknown USB bridge [0x1058:0x0748 (0x1019)]

https://bugzilla.novell.com/show_bug.cgi?id=789204 https://bugzilla.novell.com/show_bug.cgi?id=789204#c1 Stanislav Brabec changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO InfoProvider| |Ulrich.Windl@rz.uni-regensb | |urg.de --- Comment #1 from Stanislav Brabec 2012-11-15 18:18:49 CET --- Could you test smartmontools-6.0 from http://download.opensuse.org/repositories/Base:/System/ ? https://build.opensuse.org/package/show?package=smartmontools&project=Base%3ASystem It should have a support for some new bridges and many new USB ids in the database. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

Reply

Sign in to reply online Use email software

bugzilla_noreply＠novell.com

21 Nov 21 Nov

14:51

New subject: [Bug 789204] smartctl 5.42: Unknown USB bridge [0x1058:0x0748 (0x1019)]

https://bugzilla.novell.com/show_bug.cgi?id=789204 https://bugzilla.novell.com/show_bug.cgi?id=789204#c2 Ulrich Windl changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW InfoProvider|Ulrich.Windl@rz.uni-regensb | |urg.de | --- Comment #2 from Ulrich Windl 2012-11-21 15:51:39 CET --- I was able to compile and run smartmontool 6.0 with success (the missing USB bridge is specifically mentioned in CHANGELOG): # ./smartctl -a /dev/sdf smartctl 6.0 2012-10-10 r3643 [i686-linux-3.1.10-1.16-desktop] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD10JMVW-11S5XS0 Serial Number: WD-WXV1C5227811 LU WWN Device Id: 5 0014ee 25c8c1107 Firmware Version: 01.01A01 User Capacity: 1.000.204.886.016 bytes [1,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Nov 16 19:52:08 2012 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART STATUS RETURN: incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (18060) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 197) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x70b5) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 183 183 021 Pre-fail Always - 1841 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 16 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 4 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 16 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 7 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 66 194 Temperature_Celsius 0x0022 130 106 000 Old_age Always - 17 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Conveyance offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

Reply

Sign in to reply online Use email software

bugzilla_noreply＠novell.com

22 Nov 22 Nov

14:11

New subject: [Bug 789204] smartctl 5.42: Unknown USB bridge [0x1058:0x0748 (0x1019)]

https://bugzilla.novell.com/show_bug.cgi?id=789204 https://bugzilla.novell.com/show_bug.cgi?id=789204#c3 Stanislav Brabec changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |ASSIGNED --- Comment #3 from Stanislav Brabec 2012-11-22 15:10:57 CET --- Thanks, upgrade to the Factory version makes sense. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

Reply

Sign in to reply online Use email software

bugzilla_noreply＠novell.com

13 Dec 13 Dec

17:56

New subject: [Bug 789204] smartctl 5.42: Unknown USB bridge [0x1058:0x0748 (0x1019)]

https://bugzilla.novell.com/show_bug.cgi?id=789204 https://bugzilla.novell.com/show_bug.cgi?id=789204#c4 Stanislav Brabec changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |RESOLVED Resolution| |FIXED --- Comment #4 from Stanislav Brabec 2012-12-13 18:56:17 CET --- Fix of bug 790044 is now finished, and I am going to submit Factory version for openSUSE 12.1 and 12.2. Created request id 145370 to openSUSE:Maintenance. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

Reply

Sign in to reply online Use email software

bugzilla_noreply＠novell.com

18:00

New subject: [Bug 789204] smartctl 5.42: Unknown USB bridge [0x1058:0x0748 (0x1019)]

https://bugzilla.novell.com/show_bug.cgi?id=789204 https://bugzilla.novell.com/show_bug.cgi?id=789204#c5 --- Comment #5 from Bernhard Wiedemann 2012-12-13 19:00:08 CET --- This is an autogenerated message for OBS integration: This bug (789204) was mentioned in https://build.opensuse.org/request/show/145363 Factory / smartmontools https://build.opensuse.org/request/show/145368 Factory / smartmontools https://build.opensuse.org/request/show/145370 Maintenance / -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

Reply

Sign in to reply online Use email software

bugzilla_noreply＠novell.com

27 Dec 27 Dec

13:10

New subject: [Bug 789204] smartctl 5.42: Unknown USB bridge [0x1058:0x0748 (0x1019)]

https://bugzilla.novell.com/show_bug.cgi?id=789204 https://bugzilla.novell.com/show_bug.cgi?id=789204#c6 --- Comment #6 from Swamp Workflow Management 2012-12-27 13:10:53 UTC --- openSUSE-RU-2012:1696-1: An update that has two recommended fixes can now be installed. Category: recommended (low) Bug References: 789204,790044 CVE References: Sources used: openSUSE 12.2 (src): smartmontools-6.0-8.4.1 openSUSE 12.1 (src): smartmontools-6.0-1.5.1 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

Reply

Sign in to reply online Use email software

4149

Age (days ago)

4194

Last active (days ago)

Download

7 comments

1 participants

tags

participants (1)

bugzilla_noreply＠novell.com