[Bug 728656] New: 12.1 suspending computer pm-hibernate : resuming is new boot, not using the suspended image
https://bugzilla.novell.com/show_bug.cgi?id=728656 https://bugzilla.novell.com/show_bug.cgi?id=728656#c0 Summary: 12.1 suspending computer pm-hibernate : resuming is new boot, not using the suspended image Classification: openSUSE Product: openSUSE 12.1 Version: Factory Platform: Other OS/Version: SuSE Other Status: NEW Severity: Major Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: bruno@ioda-net.ch QAContact: qa@suse.de Found By: --- Blocker: --- Created an attachment (id=460694) --> (http://bugzilla.novell.com/attachment.cgi?id=460694) dmesg extract when resume happen, and next boot User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:7.0.1) Gecko/20100101 Firefox/7.0.1 FirePHP/0.4 The laptop was 11.4 before, and suspending to ram and to disk work previously. So consider the following as a regression. The default is the same using sysvinit and systemd. Having nvidia or nouveau doesn't change anything to the symptoms. Now the hardrive layout is the following parted --list Model: ATA WDC WD3200BEKT-2 (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32,3kB 1078MB 1077MB primary fat32 lba, type=0c ( DELL Dos utilities ) 2 1078MB 2155MB 1077MB primary ext4 boot, type=83 /boot 3 2155MB 320GB 318GB primary lvm, type=8e The system is setup as a whole encrypted lvm (/dev/vg0) and has 3 lvm /dev/vg0/lvswap ( swap ) /dev/vg0/lvsuse ( / ) /dev/vg0/lvhome (/home) Reproducible: Always Steps to Reproduce: 1. Once the system is upgraded or installed open some program to differentiate from normal boot, I've top on tty2, and iostat -k 2 on tty3 2. try to hibernate the computer by pm-hibernate HIBERNATE 3. see it successfull 4. power on the computer 5. see the skip of grub as expected 6. wait for the key password to uncrypt the lvm 7. see how the system is now starting like a fresh boot and not restoring the suspended image 8. fill this bug :D Actual Results: The system never use successfully the previously written image Expected Results: Being able to resume from hibernate to disk pm-suspend.log redirecting to systemctl ---- here a line of crap ---------- /usr/lib/pm-utils/sleep.d/06autofs hibernate hibernate: success. Running hook /usr/lib/pm-utils/sleep.d/30s2disk-check hibernate hibernate: INFO: checking for suspend-to-disk prerequisites... using userspace suspend method, temp. config file /var/lib/s2disk.conf setting resume device to /dev/dm-3 setting image size to 1882262937 /usr/lib/pm-utils/sleep.d/30s2disk-check hibernate hibernate: success. Running hook /usr/lib/pm-utils/sleep.d/45pcmcia hibernate hibernate: ejecting PCMCIA cards... /usr/lib/pm-utils/sleep.d/45pcmcia hibernate hibernate: success. Running hook /usr/lib/pm-utils/sleep.d/49bluetooth hibernate hibernate: /usr/lib/pm-utils/sleep.d/49bluetooth hibernate hibernate: success. Running hook /usr/lib/pm-utils/sleep.d/50rcnetwork hibernate hibernate: /usr/lib/pm-utils/sleep.d/50rcnetwork hibernate hibernate: success. Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager hibernate hibernate: Having NetworkManager put all interaces to sleep...Failed. /usr/lib/pm-utils/sleep.d/55NetworkManager hibernate hibernate: success. Running hook /usr/lib/pm-utils/sleep.d/75modules hibernate hibernate: /usr/lib/pm-utils/sleep.d/75modules hibernate hibernate: success. Running hook /usr/lib/pm-utils/sleep.d/80acpi-fan hibernate hibernate: /usr/lib/pm-utils/sleep.d/80acpi-fan hibernate hibernate: success. Running hook /usr/lib/pm-utils/sleep.d/80videobios hibernate hibernate: /usr/lib/pm-utils/sleep.d/80videobios hibernate hibernate: success. Running hook /usr/lib/pm-utils/sleep.d/90clock hibernate hibernate: /usr/lib/pm-utils/sleep.d/90clock hibernate hibernate: success. Running hook /usr/lib/pm-utils/sleep.d/94cpufreq hibernate hibernate: /usr/lib/pm-utils/sleep.d/94cpufreq hibernate hibernate: success. Running hook /usr/lib/pm-utils/sleep.d/95led hibernate hibernate: /usr/lib/pm-utils/sleep.d/95led hibernate hibernate: success. Running hook /usr/lib/pm-utils/sleep.d/95packagekit hibernate hibernate: /usr/lib/pm-utils/sleep.d/95packagekit hibernate hibernate: success. Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler hibernate hibernate: nVidia binary video drive detected, not using quirks. /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler hibernate hibernate: success. Running hook /usr/lib/pm-utils/sleep.d/99Zgrub hibernate hibernate: INFO: running prepare-grub Skipping grub entry #1, because it has the noresume option running kernel is grub menu entry 0 (vmlinuz-3.1.0-2-desktop) preparing boot-loader: selecting entry 0, kernel /boot/3.1.0-2-desktop grub-once: saving original /boot/grub/default running '/usr/sbin/grubonce 0' Using entry #0: Desktop -- openSUSE 12.1 RC 1 - 3.1.0-2 time needed for sync: 0.0 seconds, time needed for grub: 0.0 seconds. /usr/lib/pm-utils/sleep.d/99Zgrub hibernate hibernate: success. Running hook /etc/pm/sleep.d/99at hibernate hibernate: /etc/pm/sleep.d/99at hibernate hibernate: success. Running hook /usr/lib/pm-utils/sleep.d/99info hibernate hibernate: /usr/lib/pm-utils/sleep.d/99info hibernate hibernate: success. Running hook /usr/lib/pm-utils/sleep.d/99video hibernate hibernate: /usr/lib/pm-utils/sleep.d/99video hibernate hibernate: success. Mon Nov 7 13:29:27 CET 2011: performing hibernate -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=728656 https://bugzilla.novell.com/show_bug.cgi?id=728656#c Bruno Friedmann <bruno@ioda-net.ch> changed: What |Removed |Added ---------------------------------------------------------------------------- Summary|12.1 suspending computer |12.1(encrypted lvm / & |pm-hibernate : resuming is |swap) suspending computer |new boot, not using the |pm-hibernate : resuming is |suspended image |new boot, not using the | |suspended image -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=728656 https://bugzilla.novell.com/show_bug.cgi?id=728656#c Andreas Jaeger <aj@suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|bnc-team-screening@forge.pr |lnussel@suse.com |ovo.novell.com | -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=728656 https://bugzilla.novell.com/show_bug.cgi?id=728656#c1 Richard Brown <RBrownCCB@opensuse.org> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |RBrownCCB@opensuse.org --- Comment #1 from Richard Brown <RBrownCCB@opensuse.org> 2011-11-07 16:22:18 UTC --- I am not able to reproduce this as reported but I have noticed the following interesting behaviour (on my Lenovo X220, Intel graphics, i7 CPU, etc) Setup has encrypted LVM with / and swap in the LVM group. Hibernating from tty with pm-hibernate HIBERNATE seems to fire up splashy and hangs, machine never hibernates Removing splashy also removes the branding and suspend packages pm-hibernate HIBERNATE then works, but resume fails, hanging at 'Restarting tasks... done' However, Hibernating from GNOME, using the GNOME Hibernate menu option works perfectly, every time.... There's something weird going on here but from my tests it seems to suggest a problem with how pm-hibernate is doing its thing, not hibernate in general. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=728656 https://bugzilla.novell.com/show_bug.cgi?id=728656#c2 --- Comment #2 from Richard Brown <RBrownCCB@opensuse.org> 2011-11-07 16:24:58 UTC --- Further testing - running pm-hibernate HIBERNATE from within a gnome-session also works So I'm only able to find problems with hibernating from tty.. What's so special with the terminal..in theory shouldn't that be a whole lot simpler to hibernate than a fully loaded DE? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=728656 https://bugzilla.novell.com/show_bug.cgi?id=728656#c3 Ludwig Nussel <lnussel@suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO InfoProvider| |bruno@ioda-net.ch --- Comment #3 from Ludwig Nussel <lnussel@suse.com> 2011-11-08 17:23:32 CET --- suspend package not installed? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=728656 https://bugzilla.novell.com/show_bug.cgi?id=728656#c Ludwig Nussel <lnussel@suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Blocks| |728953 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=728656 https://bugzilla.novell.com/show_bug.cgi?id=728656#c4 --- Comment #4 from Bruno Friedmann <bruno@ioda-net.ch> 2011-11-08 22:03:47 UTC --- Ludwig exactly, it was removed when I decide to remove splashy (due to crash) as splashy if installed bug and get the system unable to suspend. So now I've locked uninstall splashy and push suspend zypper --no-refresh in suspend Loading repository data... Reading installed packages... Resolving package dependencies... Problem: suspend-1.0-11.1.x86_64 requires libsplashy.so.1()(64bit), but this requirement cannot be provided uninstallable providers: splashy-0.3.13-30.2.x86_64[factory-oss] Solution 1: do not forbid installation of splashy-0.3.13-30.2.x86_64[factory-oss] Solution 2: do not install suspend-1.0-11.1.x86_64 Solution 3: break suspend by ignoring some of its dependencies Choose from above solutions by number or cancel [1/2/3/c] (c): 3 Resolving dependencies... Resolving package dependencies... The following NEW package is going to be installed: suspend 1 new package to install. Overall download size: 91.0 KiB. After the operation, additional 395.0 KiB will be used. Continue? [y/n/?] (y): y Retrieving package suspend-1.0-11.1.x86_64 (1/1), 91.0 KiB (395.0 KiB unpacked) Retrieving: suspend-1.0-11.1.x86_64.rpm [done] Installing: suspend-1.0-11.1 [done] Additional rpm output: Recreating all initial ramdiscs. This could take a while. (Touch /var/lib/no_initrd_recreation_by_suspend to prevent.) Scanning scripts ... Resolve dependencies ... Install symlinks in /lib/mkinitrd/setup ... Install symlinks in /lib/mkinitrd/boot ... Kernel image: /boot/vmlinuz-3.1.0-1-desktop Initrd image: /boot/initrd-3.1.0-1-desktop Root device: /dev/vgsys/lvsuse (mounted on / as ext4) Resume device: /dev/vgsys/lvswap enabling LUKS support for /dev/md1 (cr_md1) modprobe: Module kernel not found. WARNING: no dependencies for kernel module 'kernel' found. Kernel Modules: thermal_sys thermal processor fan dm-mod dm-crypt dm-snapshot raid0 raid1 raid10 async_tx async_memcpy xor async_xor raid6_pq async_pq async_raid6_recov raid456 linear arc4 ecb sha256_generic cbc Features: acpi dm block usb md lvm2 luks resume.userspace resume.kernel Bootsplash: hardDrive (1920x1080), hardDrive (800x600) Kernel image: /boot/vmlinuz-3.1.0-rc9-1-desktop Initrd image: /boot/initrd-3.1.0-rc9-1-desktop Root device: /dev/vgsys/lvsuse (mounted on / as ext4) Resume device: /dev/vgsys/lvswap enabling LUKS support for /dev/md1 (cr_md1) modprobe: Module kernel not found. WARNING: no dependencies for kernel module 'kernel' found. Kernel Modules: thermal_sys thermal processor fan dm-mod dm-crypt dm-snapshot raid0 raid1 raid10 async_tx async_memcpy xor async_xor raid6_pq async_pq async_raid6_recov raid456 linear arc4 ecb sha256_generic cbc Features: acpi dm block usb md lvm2 luks resume.userspace resume.kernel Bootsplash: hardDrive (1920x1080), hardDrive (800x600) I will retry tomorrow morning if that works. Then change the needinfo flag -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=728656 https://bugzilla.novell.com/show_bug.cgi?id=728656#c5 Bruno Friedmann <bruno@ioda-net.ch> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW InfoProvider|bruno@ioda-net.ch | --- Comment #5 from Bruno Friedmann <bruno@ioda-net.ch> 2011-11-09 08:27:30 UTC --- okay now I've some more clue. First suspend need absolutely splashy otherwise it failed error loading splashy lib. I've readded the two splashy & splashy-branding-openSUSE (which as 11.3 or 11.1 theme, will be another bug report) The first time I've tried pm-hibernate the splash screen appear, then nothing happen. when I hit the power button, the system goes to shutdown, but only after a long time ( circular circle detected and killed by systemd ) Once rebooted I've tried what's suggested in bnc #728953 powersave -U and then surprise Error org.freedesktop.UPower.GeneralError: Not enough swap space swap is not mounted then systemctl show swapon -a swapon -s Filename Type Size Used Priority /dev/mapper/vgsys-lvswap partition 19296252 0 -1 then restest powersave -U again Then this time the suspend happen with the fatal error splash_stop_system error -10 (yeap the famous one) Reboot start normally starting what was resumed. ask my password to decrypt the raid/lvm with splash_start_system error -10 and strange behaviour between the splashy branding image and the normal one. I will change the id for the swap and use by-uuid, I've done that for /boot (on raid1) cause having it declared as /dev/md127 was generating a lot of trouble. Ludwig, what can I test (methodology) and give you as logs & debug trace. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=728656 https://bugzilla.novell.com/show_bug.cgi?id=728656#c6 --- Comment #6 from Bruno Friedmann <bruno@ioda-net.ch> 2011-11-09 08:34:54 UTC --- okay forget : even if powersave -U work (run as root) doing a pm-hibernate HIBERNATE crash cat /var/log/pm-suspend.log redirecting to systemctl /etc/pm/sleep.d/99at hibernate hibernate: success. Running hook /usr/lib/pm-utils/sleep.d/99info hibernate hibernate: /usr/lib/pm-utils/sleep.d/99info hibernate hibernate: success. Running hook /usr/lib/pm-utils/sleep.d/99video hibernate hibernate: /usr/lib/pm-utils/sleep.d/99video hibernate hibernate: success. Wed Nov 9 09:26:35 CET 2011: performing hibernate INFO: using built-in quirks database from HAL. INFO: S2RAM_OPTS from HAL quirks: ' '. Now I've rebooted, and the swap is normally mounted ... (becoming crazy :-) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=728656 https://bugzilla.novell.com/show_bug.cgi?id=728656#c7 Ludwig Nussel <lnussel@suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |rjw@suse.com AssignedTo|lnussel@suse.com |mvyskocil@suse.com --- Comment #7 from Ludwig Nussel <lnussel@suse.com> 2011-11-09 11:55:19 CET --- no idea how to debug suspend/resume. The luks part works fine AFAICT so nothing for my desk. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=728656 https://bugzilla.novell.com/show_bug.cgi?id=728656#c8 Michal Vyskocil <mvyskocil@suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|mvyskocil@suse.com |hmacht@suse.com --- Comment #8 from Michal Vyskocil <mvyskocil@suse.com> 2011-11-11 12:48:06 UTC --- pm-utils is not guilty as there was no big change in pm-utils between 11.4 and Factory (only small unrelated fix in /usr/bin/powersave). It uses suspend package to perform the actions with a fallback to kernel, so one of those methods caused a regression. In openSUSE is pm-utils configured to use s2ram/s2disk/s2both first and as I see a big version update (0.8->1.0) + changes in patches there I suspect it. See /usr/lib/pm-utils/module.d/uswsusp for details how it's called from pm-utils. If those binaries are not available, then kernel methods are used as a fallback (there's tuxonice module, but not usable with standard SUSE kernels). In case of kernel mode, the following code (see /usr/lib/pm-utils/pm-functions for details) is executed 307 if [ -z "$HIBERNATE_MODULE" ] && \ 308 [ -f /sys/power/disk ] && \ 309 grep -q disk /sys/power/state; then 310 HIBERNATE_MODULE="kernel" 311 do_hibernate() 312 { 313 [ -n "${HIBERNATE_MODE}" ] && \ 314 grep -qw "${HIBERNATE_MODE}" /sys/power/disk && \ 315 echo -n "${HIBERNATE_MODE}" > /sys/power/disk 316 echo -n "disk" > /sys/power/state 317 } 318 fi HIBERNATE_MODE is "shutdown" by default Not sure what about Gnome - don't it use upower for it? In this case /usr/bin/powersave might work as well, because it calls upower via D-BUS API. What might be useful for suspend maintainer * what's in /etc/suspend.conf and in /var/lib/s2dick.conf? * is there anything special in /etc/pm/config.d? * if you changed /usr/lib/pm-utils/defaults, please show it as well * run the s2disk and/or kernel mode from command line and report the results -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=728656 https://bugzilla.novell.com/show_bug.cgi?id=728656#c9 --- Comment #9 from Bruno Friedmann <bruno@ioda-net.ch> 2011-11-11 16:19:37 UTC --- cat /var/lib/s2disk.conf resume device = /dev/dm-5 image size = 7597067673 # parameters taken from /etc/suspend.conf: /dev/disk/by-id dm-name-vgsys-lvswap -> ../../dm-5 cat /etc/suspend.conf ############################################################################# ## ## note: ## using pm-utils or powersaved, this file (/etc/suspend.conf) only serves as ## a template, image_size and resume_device are filled in dynamically ## and the generated /var/lib/s2disk.conf is used to suspend. ## _If_ you enter stuff here, it will be copied to that file unchanged, ## but this might skip some features and sanity checks. ## ############################################################################# ## ## your snapshot device. You should not need to change this. # snapshot device = /dev/snapshot # ## enter your swap device here. Read the warning on pm-utils above, please! #resume device = <path_to_resume_device_file> # ## image size will also be filled in by pm-utils #image size = 350000000 # #suspend loglevel = 2 #max loglevel = # ## compute checksum will slow down suspend and resume. ## Debugging option, default n #compute checksum = y # ## compression will often speed up suspend and resume (default y) #compress = n # ## encryption support is rather basic right now - e.g. USB keyboards will not ## work to enter the key in the standard initrd, also beware of ## non-US keyboard layouts. Only use this if you know what you are doing. #encrypt = y # ## RSA key file that is used for encryption #RSA key file = /etc/suspend.key # ## start writing out the image early, before buffers are full. ## will most of the time speed up overall writing time (default y) #early writeout = n # ## use splash picture? (default y) #splash = y # ## shutdown method: ## platform - go through ACPI BIOS to power off the machine (default on ## machines that support it) ## shutdown - just power off like after a shutdown ## reboot - reboot instead of powering off. For debugging only. #shutdown method = platform # ## resume offset: for use with swapfiles, use "swap-offset" to find out. #resume offset = 12345 # ## pause after resume for n seconds, so that the timing information can ## actually be read (default 0 => don't pause) #resume pause = 2 # ## use threads for suspend? (default n) ## this hugely speeds up encryption and also compression on mulitcore machines #threads = y swapon -s Filename Type Size Used Priority /dev/mapper/vgsys-lvswap partition 19296252 0 0 ll -R /etc/pm/config.d /etc/pm/config.d: total 4 -rw-r--r-- 1 root root 884 Nov 8 09:36 rtcwake.config cat /etc/pm/config.d/rtcwake.config # This file configures the ability to wake from suspend or hibernate # at a given time. It is used in conjunction with the 02rtcwake hook. # Whether to respect the user-passed-in num_seconds_to_sleep # If off, then the system configuration (below) will be used even if # the user passes in a num_seconds_to_sleep. #USER_RTCWAKE_ALLOWED="no" USER_RTCWAKE_ALLOWED="yes" # Should we wake up from suspend on a given time? # if those are set to "no", the configuration values below have no effect. #SUSPEND_RTCWAKE_ENABLED="yes" #HIBERNATE_RTCWAKE_ENABLED="yes" SUSPEND_RTCWAKE_ENABLED="no" HIBERNATE_RTCWAKE_ENABLED="no" # Time to wake up in local, 24-hour time #RTCWAKE_TIME="22:30" #RTCWAKE_TIME="9:00" # Days to wake up (1=monday, 7=sunday), in increasing order, # with a single space between each day #RTCWAKE_DAYS="1 2 3 4 5" #RTCWAKE_DAYS="1 3 5" #RTCWAKE_DAYS="1 2 3 4 5 6 7" ll /usr/lib/pm-utils/defaults -rw-r--r-- 1 root root 2919 Nov 8 09:36 /usr/lib/pm-utils/defaults Which is the default as installed by pm-utils-1.4.1-13.3.x86_64 Will continure with s2disk & command kernel -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=728656 https://bugzilla.novell.com/show_bug.cgi?id=728656#c10 Bruno Friedmann <bruno@ioda-net.ch> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |fcrozat@suse.com --- Comment #10 from Bruno Friedmann <bruno@ioda-net.ch> 2011-11-13 11:00:11 UTC --- Okay after running 30 times the suspend/resume process on two different laptop here where I am. Good news the 2 laptops react exactly the same : powersave -U work pm-hibernate fail if splash=y in active. You get the splashy suspend screen and then nothing more. Hitting the poweroff button create the powerdown button and then systemd try to poweroff the computer, there's a loop at that time, and a lot of message are created on console about some /proc/ readonly ... The computer poweroff, and when you restart it, it try to resume and failed with fsck (sometimes 2/5 with warning about last date time write on fs are in future). This is the same even if you change the theme for another than openSUSE splashy_config --set-theme default for example. But note also the splashy error -10 at startup and suspend time. if you comment splash=n and then issue pm-hibernate the process goes smoothly. At wake-up the grub pick correctly the action, (in my case, the passphrase to unlock crypted lvm or raid is shown, and work) and the system state is correctly restored. To notice, even with splash=n in config, at wake up splashy analyse the commandline and try to start splashy image theme which appear during 1 seconde then it replaced by the normal bootsplash theme. My conviction is that we should get rid off splashy & bootsplash in the next run for 12.2 to avoid those kind of wrong interaction. ps : I add fcrozat in CC just for information about the interaction with systemd. (not sure there's something to change directly in systemd, but the "war" between splashy and bootsplash should be fixed or unified if we don't change for another system (plymouth?) About the -10error https://bugzilla.novell.com/show_bug.cgi?id=664793 https://bugzilla.novell.com/show_bug.cgi?id=715967 About wrong branding https://bugzilla.novell.com/show_bug.cgi?id=730050 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=728656 https://bugzilla.novell.com/show_bug.cgi?id=728656#c11 Holger Macht <hmacht@suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO InfoProvider| |bruno@ioda-net.ch --- Comment #11 from Holger Macht <hmacht@suse.com> 2011-11-16 11:18:24 UTC --- Just to make sure: Does 'powersave -U' really work? With and without splashy? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=728656 https://bugzilla.novell.com/show_bug.cgi?id=728656#c12 Bruno Friedmann <bruno@ioda-net.ch> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW InfoProvider|bruno@ioda-net.ch | --- Comment #12 from Bruno Friedmann <bruno@ioda-net.ch> 2011-11-16 19:13:31 UTC --- Hoger I just remade a test. powersave -U with or without splashy finish correctly the shutdown process. and you get a safe boot wake up after. The only things that happen is if you have splashy=y then you saw during 1/10sec the splashy image, and next to that the splashy_start... error=-10 and you saw the suspend process in console storing ram image on disk. If you know which log or part of log you need, I will attach them here -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=728656 https://bugzilla.novell.com/show_bug.cgi?id=728656#c13 Holger Macht <hmacht@suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO InfoProvider| |bruno@ioda-net.ch --- Comment #13 from Holger Macht <hmacht@suse.com> 2011-11-17 14:19:20 UTC --- Ok, please execute (as root): s2disk /insert/your/swap/partition/here Does the hibernation progress work? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=728656 https://bugzilla.novell.com/show_bug.cgi?id=728656#c14 Bruno Friedmann <bruno@ioda-net.ch> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW InfoProvider|bruno@ioda-net.ch | --- Comment #14 from Bruno Friedmann <bruno@ioda-net.ch> 2011-11-19 20:38:55 UTC --- s2disk /dev/vg0/lvswap with splashy=y in /etc/suspend.conf = failure the theme image is shown but nothing happen (I stop the computer with power button to initiate a full powerdown) with splashy = n s2diks just work like a charm -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=728656 https://bugzilla.novell.com/show_bug.cgi?id=728656#c15 Holger Macht <hmacht@suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO InfoProvider| |bruno@ioda-net.ch --- Comment #15 from Holger Macht <hmacht@suse.com> 2011-12-08 11:59:56 UTC --- Ok, yet another command for you to try: dbus-send --print-reply --system --dest=org.freedesktop.UPower /org/freedesktop/UPower org.freedesktop.UPower.Hibernate Does the hibernation work? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=728656 https://bugzilla.novell.com/show_bug.cgi?id=728656#c17 Bruno Friedmann <bruno@ioda-net.ch> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution| |WORKSFORME --- Comment #17 from Bruno Friedmann <bruno@ioda-net.ch> 2012-01-22 19:32:10 UTC --- And forget to change the status :D -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
participants (1)
-
bugzilla_noreply＠novell.com