https://bugzilla.novell.com/show_bug.cgi?id=396173
User maxmars@gmail.com added comment
https://bugzilla.novell.com/show_bug.cgi?id=396173#c2
--- Comment #2 from Massimiliano Marsiglietti 2008-05-31 16:47:42 MDT ---
By the way here's dmesg output. The last few lines are probably because I tried
several times to have it recognized by yast so it queried for it.
Linux version 2.6.25.4-8-default (geeko@buildhost) (gcc version 4.3.1 20080507
(prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-05-26
15:23:05 +0200
Command line:
root=/dev/disk/by-id/scsi-SATA_HDT722520DLA380_VDK51BTDDSBKML-part6
resume=/dev/sda5 splash=silent vga=0x31a
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 156) 0 entries of 3200 used
Entering add_active_range(0, 256, 524272) 1 entries of 3200 used
end_pfn_map = 1048576
DMI 2.2 present.
ACPI: RSDP 000F7930, 0014 (r0 Nvidia)
ACPI: RSDT 7FFF3000, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
ACPI: FACP 7FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
ACPI: DSDT 7FFF30C0, 4F33 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)
ACPI: FACS 7FFF0000, 0040
ACPI: SSDT 7FFF8080, 00F7 (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: SRAT 7FFF8180, 0090 (r1 AMD HAMMER 1 AMD 1)
ACPI: APIC 7FFF8000, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: Node 0 PXM 0 0-a0000
Entering add_active_range(0, 0, 156) 0 entries of 3200 used
SRAT: Node 0 PXM 0 0-80000000
Entering add_active_range(0, 0, 156) 1 entries of 3200 used
Entering add_active_range(0, 256, 524272) 1 entries of 3200 used
NUMA: Using 63 for the hash shift.
Bootmem setup node 0 0000000000000000-000000007fff0000
NODE_DATA [000000000000c000 - 0000000000013fff]
bootmap [0000000000014000 - 0000000000023fff] pages 10
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff] SMP_TRAMPOLINE
early res: 2 [200000-8b4bd7] TEXT DATA BSS
early res: 3 [37a4a000-37fef2f5] RAMDISK
early res: 4 [9f800-a07ff] EBDA
early res: 5 [8000-bfff] PGTABLE
[ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
[ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
[ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
[ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
[ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
[ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
[ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
[ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
[ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
[ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
[ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
[ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
[ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0 -> 156
0: 256 -> 524272
On node 0 totalpages: 524172
DMA zone: 56 pages used for memmap
DMA zone: 1726 pages reserved
DMA zone: 2214 pages, LIFO batch:0
DMA32 zone: 7111 pages used for memmap
DMA32 zone: 513065 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
PM: Registered nosave memory: 000000000009c000 - 000000000009d000
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
SMP: Allowing 2 CPUs, 1 hotplug CPUs
PERCPU: Allocating 47936 bytes of per cpu data
Built 1 zonelists in Node order, mobility grouping on. Total pages: 515279
Policy zone: DMA32
Kernel command line:
root=/dev/disk/by-id/scsi-SATA_HDT722520DLA380_VDK51BTDDSBKML-part6
resume=/dev/sda5 splash=silent vga=0x31a
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC calibrated against PM_TIMER
time.c: Detected 2210.084 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
Checking aperture...
Node 0: aperture @ c0000000 size 256 MB
Memory: 2055032k/2097088k available (2365k kernel code, 41656k reserved, 1920k
data, 400k init)
CPA: page pool initialized 1 of 1 pages preallocated
Calibrating delay using timer specific routine.. 4423.00 BogoMIPS (lpj=8846012)
Security Framework initialized
AppArmor: AppArmor initialized <NULL>
AppArmor: Registered secondary security module capability
Capability LSM initialized as secondary
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
ACPI: Core revision 20070126
ACPI: Checking initramfs for custom DSDT
Parsing all Control Methods:
Table [DSDT](id 0001) - 909 Objects with 95 Devices 319 Methods 36 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 3 Objects with 0 Devices 0 Methods 0 Regions
tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
Using local APIC timer interrupts.
APIC timer calibration result 12557291
Detected 12.557 MHz APIC timer.
Brought up 1 CPUs
CPU0 attaching sched-domain:
domain 0: span 00000000,00000000,00000000,00000001
groups: 00000000,00000000,00000000,00000001
net_namespace: 1016 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int
0x9
evgpeblk-0956 [00] ev_create_gpe_block : GPE 20 to 5F [_GPE] 8 regs on int
0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 1 Runtime GPEs
in this block
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 0 Runtime GPEs
in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package
initialization:................................................................................................
Initialized 32/36 Regions 9/9 Fields 36/36 Buffers 19/27 Packages (921 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:..
Executed 2 _INI methods requiring 1 _STA executions (examined 100 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17)
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16)
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23)
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
ACPI: Power Resource [ISAV] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:00:00.0
agpgart: Detected AGP bridge 0
agpgart: Setting up Nforce3 AGP.
agpgart: AGP aperture is 256M @ 0xc0000000
AppArmor: AppArmor Filesystem Enabled
ACPI: RTC can wake from S4
system 00:00: ioport range 0x4000-0x407f has been reserved
system 00:00: ioport range 0x4080-0x40ff has been reserved
system 00:00: ioport range 0x4400-0x447f has been reserved
system 00:00: ioport range 0x4480-0x44ff has been reserved
system 00:00: ioport range 0x4800-0x487f has been reserved
system 00:00: ioport range 0x4880-0x48ff has been reserved
system 00:01: iomem range 0xd1800-0xd3fff has been reserved
system 00:01: iomem range 0xf0000-0xf7fff could not be reserved
system 00:01: iomem range 0xf8000-0xfbfff could not be reserved
system 00:01: iomem range 0xfc000-0xfffff could not be reserved
system 00:01: iomem range 0x7fff0000-0x7fffffff could not be reserved
system 00:01: iomem range 0xffff0000-0xffffffff has been reserved
system 00:01: iomem range 0x0-0x9ffff could not be reserved
system 00:01: iomem range 0x100000-0x7ffeffff could not be reserved
system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:01: iomem range 0xfefff000-0xfeffffff has been reserved
system 00:01: iomem range 0xfff80000-0xfff80fff has been reserved
system 00:01: iomem range 0xfff90000-0xfffbffff has been reserved
system 00:01: iomem range 0xfffed000-0xfffeffff has been reserved
system 00:03: ioport range 0x4d0-0x4d1 has been reserved
system 00:03: ioport range 0x294-0x297 has been reserved
system 00:03: ioport range 0x4e0-0x4e7 has been reserved
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: 0xe0000000-0xe2ffffff
PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
PCI: Bridge: 0000:00:0e.0
IO window: disabled.
MEM window: 0xe3000000-0xe3ffffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 5780k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1212280117.624:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000900000, using 10240k,
total 262144k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 208945 bytes
bootsplash: ...found (1280x1024, 286424 bytes, v3).
Console: switching to colour frame buffer device 156x60
fb0: VESA VGA frame buffer device
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
Switched to high resolution mode on CPU 0
input: PC Speaker as /devices/platform/pcspkr/input/input0
cpuidle: using governor ladder
cpuidle: using governor menu
NET: Registered protocol family 1
registered taskstats version 1
Freeing unused kernel memory: 400k freed
Write protecting the kernel read-only data: 1680k
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THRM] (35 C)
No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
sata_nv 0000:00:0a.0: version 3.5
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 23 (level, high) ->
IRQ 23
PCI: Setting latency timer of device 0000:00:0a.0 to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xc000 irq 23
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xc008 irq 23
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: HDT722520DLA380, V44OA96A, max UDMA/133
ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
input: ImExPS/2 Generic Explorer Mouse as
/devices/platform/i8042/serio1/input/input2
ata2: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA HDT722520DLA380 V44O PQ: 0 ANSI: 5
pata_amd 0000:00:08.0: version 0.3.10
PCI: Setting latency timer of device 0000:00:08.0 to 64
scsi2 : pata_amd
scsi3 : pata_amd
ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ata3: port disabled. ignoring.
ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL11, max UDMA/33
ata4.01: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL11, max UDMA/33
ata4: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0c0) ACPI=0x701f
(60:60:0x1f)
ata4: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0c0) ACPI=0x701f
(60:60:0x1f)
ata4.00: configured for UDMA/33
ata4.01: configured for UDMA/33
scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5
scsi 3:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5
ACPI: PNP0C0B:00 is registered as cooling_device1
ACPI: Fan [FAN] (on)
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) ->
IRQ 22
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 22, io mem 0xe4003000
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sda: sda1 sda2 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25.4-8-default ohci_hcd
usb usb1: SerialNumber: 0000:00:02.0
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 21 (level, high) ->
IRQ 21
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:02.2: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: irq 21, io mem 0xe4005000
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.25.4-8-default ehci_hcd
usb usb2: SerialNumber: 0000:00:02.2
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) ->
IRQ 20
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: irq 20, io mem 0xe4004000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.25.4-8-default ohci_hcd
usb usb3: SerialNumber: 0000:00:02.1
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
usb 2-1: New USB device found, idVendor=04b4, idProduct=6560
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
PM: Starting manual resume from disk
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button (CM) [PWRB]
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APCH] -> GSI 23 (level, high) ->
IRQ 23
PCI: Setting latency timer of device 0000:00:05.0 to 64
Driver 'sr' needs updating - please use bus_type methods
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
sr 3:0:1:0: Attached scsi CD-ROM sr1
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
sr 3:0:1:0: Attached scsi generic sg2 type 5
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k
forcedeth 0000:00:05.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:04:61:b7:bb:e7
forcedeth 0000:00:05.0: csum timirq lnktim desc-v2
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 22 (level, high) ->
IRQ 22
PCI: Setting latency timer of device 0000:00:06.0 to 64
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
Linux video capture interface: v2.00
saa7130/34: v4l2 driver version 0.2.14 loaded
intel8x0_measure_ac97_clock: measured 54888 usecs
intel8x0: clocking to 46907
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC2] -> GSI 17 (level, low) ->
IRQ 17
saa7133[0]: found at 0000:02:09.0, rev: 208, irq: 17, latency: 32, mmio:
0xe3000000
saa7133[0]: subsystem: 5168:0319, board: LifeView FlyDVB Trio
[card=84,autodetected]
saa7133[0]: board init: gpio is 211400
saa7133[0]: i2c eeprom 00: 68 51 19 03 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: 00 00 60 0a ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 f9 ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 00 10 c0 ff 12 08 01 c2 96 c6 1c 16 3a 15 ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom f0: 00 0c 45 00 54 db ff ff ff ff ff ff ff ff ff ff
ppdev: user-space parallel port driver
tuner' 2-004b: chip found @ 0x96 (saa7133[0])
tda8290 2-004b: setting tuner address to 61
tda8290 2-004b: type set to tda8290+75a
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
DVB: registering new adapter (saa7133[0])
DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 29 -- ok
Adding 2104472k swap on /dev/sda5. Priority:-1 extents:1 across:2104472k
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised:
dm-devel@redhat.com
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.9)
type=1505 audit(1212272935.387:2): operation="profile_load" name="/bin/ping"
name2="default" pid=1358
type=1505 audit(1212272935.439:3): operation="profile_load" name="/sbin/klogd"
name2="default" pid=1360
type=1505 audit(1212272935.495:4): operation="profile_load"
name="/sbin/syslog-ng" name2="default" pid=1362
type=1505 audit(1212272935.555:5): operation="profile_load"
name="/sbin/syslogd" name2="default" pid=1371
type=1505 audit(1212272935.627:6): operation="profile_load"
name="/usr/sbin/avahi-daemon" name2="default" pid=1375
type=1505 audit(1212272935.667:7): operation="profile_load"
name="/usr/sbin/identd" name2="default" pid=1376
type=1505 audit(1212272935.703:8): operation="profile_load"
name="/usr/sbin/mdnsd" name2="default" pid=1377
type=1505 audit(1212272935.747:9): operation="profile_load"
name="/usr/sbin/nscd" name2="default" pid=1386
type=1505 audit(1212272935.859:10): operation="profile_load"
name="/usr/sbin/ntpd" name2="default" pid=1391
type=1505 audit(1212272935.907:11): operation="profile_load"
name="/usr/sbin/traceroute" name2="default" pid=1417
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ processors (1 cpu cores)
(version 2.20.00)
powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x6
powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x8
powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa
powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
Marking TSC unstable due to cpufreq changes
Clocksource tsc unstable (delta = -102971575 ns)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
bootsplash: status on console 0 changed to on
eth0: no IPv6 routers present
parport_pc 00:08: disabled
parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
parport 0x378: You gave this address, but there is probably no parallel port
there!
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
lp0: using parport0 (polling).
parport_pc 00:08: activated
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
lp0: using parport0 (interrupt-driven).
ppdev0: registered pardevice
ppdev0: unregistered pardevice
ppdev0: registered pardevice
ppdev0: unregistered pardevice
ppdev0: registered pardevice
ppdev0: unregistered pardevice
DMA write timed out
parport0: FIFO is stuck
parport0: BUSY timeout (1) in compat_write_block_pio
DMA write timed out
parport0: BUSY timeout (-4) in compat_write_block_pio
parport0: BUSY timeout (-4) in compat_write_block_pio
DMA write timed out
parport0: FIFO is stuck
parport0: BUSY timeout (1) in compat_write_block_pio
DMA write timed out
parport0: FIFO is stuck
parport0: BUSY timeout (1) in compat_write_block_pio
DMA write timed out
parport0: FIFO is stuck
parport0: BUSY timeout (1) in compat_write_block_pio
DMA write timed out
parport0: FIFO is stuck
parport0: BUSY timeout (1) in compat_write_block_pio
DMA write timed out
parport0: BUSY timeout (-4) in compat_write_block_pio
DMA write timed out
parport0: BUSY timeout (-4) in compat_write_block_pio
DMA write timed out
ppdev0: registered pardevice
ppdev0: unregistered pardevice
ppdev0: registered pardevice
ppdev0: unregistered pardevice
parport0: FIFO is stuck
parport0: BUSY timeout (1) in compat_write_block_pio
DMA write timed out
parport0: BUSY timeout (-4) in compat_write_block_pio
lp0 releasing parport
parport0: BUSY timeout (-4) in compat_write_block_pio
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.