[Bug 551641] New: Kernel thinks it has Transmeta CPU instead of Intel and shows only one instead of two CPU-cores
http://bugzilla.novell.com/show_bug.cgi?id=551641 Summary: Kernel thinks it has Transmeta CPU instead of Intel and shows only one instead of two CPU-cores Classification: openSUSE Product: openSUSE 11.2 Version: RC 2 Platform: HP OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers@forge.provo.novell.com ReportedBy: henk.vanvelden@xs4all.nl QAContact: qa@suse.de Found By: --- User-Agent: Mozilla/5.0 (compatible; Konqueror/3.5; Linux) KHTML/3.5.10 (like Gecko) SUSE Found this looking at the My Computer page: only one CPU found. This is of course based on Kernel information, so I started looking at /proc/cpuinfo (see below). Also at dmesg. See that at one point a Transmeta CPU is mentioned, but at many other places Intel. I can not of course start using 11.2 with only half my CPU capacity. As this is a normal vendor (HP) system I suspect more people having this (but maybe not looking thouroughly at the My Computer page). Reproducible: Always Steps to Reproduce: 1.Boot 2.look at dmesg | grep CPU and cat /proc/cpuinfo 3. Actual Results: dmesg | grep CPU: [ 0.000000] Transmeta TransmetaCPU [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:8 [ 0.000000] PERCPU: Embedded 14 pages at c1a25000, static data 34204 bytes [ 0.000000] Initializing CPU#0 [ 0.032061] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.032065] CPU: L2 cache: 1024K [ 0.032069] CPU: Physical Processor ID: 0 [ 0.032071] CPU: Processor Core ID: 0 [ 0.032076] mce: CPU supports 6 MCE banks [ 0.032087] CPU0: Thermal monitoring enabled (TM2) [ 0.052039] Brought up 1 CPUs [ 0.052089] CPU0 attaching NULL sched-domain. [ 0.500998] Switched to high resolution mode on CPU 0 [ 1.455278] processor LNXCPU:00: registered as cooling_device0 [ 19.243956] powernow: This module only works with AMD K7 CPUs [ 55.014525] CPU0 attaching NULL sched-domain. [ 55.014601] CPprocessor : 0 cat /proc/cpuinfo: vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Genuine Intel(R) CPU 2140 @ 1.60GHz stepping : 2 cpu MHz : 1200.000 cache size : 1024 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm bogomips : 3200.95 clflush size : 64 power management: U0 attaching NULL sched-domain. Expected Results: On openSUSE 10.3 the results are: dmesg | grep CPU: Initializing CPU#0 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 Intel machine check reporting enabled on CPU#0. CPU0: Intel Genuine Intel(R) CPU 2140 @ 1.60GHz stepping 02 Initializing CPU#1 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 Intel machine check reporting enabled on CPU#1. CPU1: Intel Genuine Intel(R) CPU 2140 @ 1.60GHz stepping 02 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Switched to NOHz mode on CPU #0 Switched to NOHz mode on CPU #1 powernow: This module only works with AMD K7 CPUs cat /proc/cpuinfo: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Genuine Intel(R) CPU 2140 @ 1.60GHz stepping : 2 cpu MHz : 1600.000 cache size : 1024 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl est tm2 ssse3 cx16 xtpr lahf_lm bogomips : 3203.50 clflush size : 64 processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Genuine Intel(R) CPU 2140 @ 1.60GHz stepping : 2 cpu MHz : 1600.000 cache size : 1024 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl est tm2 ssse3 cx16 xtpr lahf_lm bogomips : 3200.95 clflush size : 64 The problem is discussed at http://forums.opensuse.org/pre-release-beta/424365-has-11-2-rc2-kernel-stole... where additinal information can be found. The system is an HP Pavilion Slimline s3160.nl desktop pc Basisprocessor : Pentium E2140 (C) 1,6 GHz 800-MHz bus aan de voorzijde Socket 775 Chipset : Intel 945G Moederbord: Fabrikant: Asus Naam moederbord: IPILP-AR Naam HP/Compaq moederbord: Locktite-GL8E -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=551641 User henk.vanvelden@xs4all.nl added comment http://bugzilla.novell.com/show_bug.cgi?id=551641#c1 --- Comment #1 from Henk van Velden <henk.vanvelden@xs4all.nl> 2009-10-31 08:30:54 MDT --- Tried also with kernel-default and kernel-pae. Same problem. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=551641 User henk.vanvelden@xs4all.nl added comment http://bugzilla.novell.com/show_bug.cgi?id=551641#c2 --- Comment #2 from Henk van Velden <henk.vanvelden@xs4all.nl> 2009-11-01 08:40:55 MST --- I started a bug report at http://bugzilla.kernel.org/show_bug.cgi?id=14525 -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=551641 User henk.vanvelden@xs4all.nl added comment http://bugzilla.novell.com/show_bug.cgi?id=551641#c3 --- Comment #3 from Henk van Velden <henk.vanvelden@xs4all.nl> 2009-11-02 03:54:19 MST --- The conclusion that the kernel sees a Transmeta CPU is completely wrong! This makes also the title of this bug bogus. It should read: "Only one of two CPU kernels initialized". I also started a bug at bugzilla.kernel.org: 14525 Below is the COMPLETTE dmesg: [ 0.000000] Linux version 2.6.31.5-0.1-desktop (geeko@buildhost) (gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #1 SMP PREEMPT 2009-10-26 15:49:03 +0100 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fedf800 (usable) [ 0.000000] BIOS-e820: 000000003fedf800 - 000000003fee0000 (reserved) [ 0.000000] BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data) [ 0.000000] BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3fedf max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003fedf800 (usable) [ 0.000000] modified: 000000003fedf800 - 000000003fee0000 (reserved) [ 0.000000] modified: 000000003fee0000 - 000000003fee3000 (ACPI NVS) [ 0.000000] modified: 000000003fee3000 - 000000003fef0000 (ACPI data) [ 0.000000] modified: 000000003fef0000 - 000000003ff00000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 01000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000036ffe000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0036e00000 page 2M [ 0.000000] 0036e00000 - 0036ffe000 page 4k [ 0.000000] kernel direct mapping tables up to 36ffe000 @ 10000-1b000 [ 0.000000] RAMDISK: 378c7000 - 37fef30a [ 0.000000] Allocated new RAMDISK: 00af7000 - 0121f30a [ 0.000000] Move RAMDISK from 00000000378c7000 - 0000000037fef309 to 00af7000 - 0121f309 [ 0.000000] ACPI: RSDP 000f7fe0 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 3fee30c0 00054 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 3fee7940 000F4 (v03 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 3fee3280 04671 (v01 HPQOEM SLIC-CPC 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 3fee0000 00040 [ 0.000000] ACPI: SLIC 3fee7b80 00176 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: HPET 3fee7d40 00038 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 3fee7dc0 0003C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 3fee7a80 00084 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: SSDT 3fee8320 00304 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] could not find any ACPI SRAT memory areas. [ 0.000000] failed to get NUMA memory information from SRAT table [ 0.000000] NUMA - single node, flat memory mode [ 0.000000] Node: 0, start_pfn: 0, end_pfn: 3fedf [ 0.000000] Setting physnode_map array to node 0 for pfns: [ 0.000000] 0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 3c000 [ 0.000000] node 0 pfn: [0 - 3fedf] [ 0.000000] Reserving 2048 pages of KVA for lmem_map of node 0 at 3f600 [ 0.000000] remove_active_range (0, 259584, 261632) [ 0.000000] Reserving total of 800 pages for numa KVA remap [ 0.000000] kva_start_pfn ~ 36600 max_low_pfn ~ 36ffe [ 0.000000] max_pfn = 3fedf [ 0.000000] 142MB HIGHMEM available. [ 0.000000] 879MB LOWMEM available. [ 0.000000] max_low_pfn = 36ffe, highstart_pfn = 36ffe [ 0.000000] Low memory ends at vaddr f6ffe000 [ 0.000000] node 0 will remap to vaddr f6600000 - f6e00000 [ 0.000000] allocate_pgdat: node 0 NODE_DATA f6600000 [ 0.000000] remap_numa_kva: node 0 [ 0.000000] remap_numa_kva: f6600000 to pfn 0003f600 [ 0.000000] remap_numa_kva: f6800000 to pfn 0003f800 [ 0.000000] remap_numa_kva: f6a00000 to pfn 0003fa00 [ 0.000000] remap_numa_kva: f6c00000 to pfn 0003fc00 [ 0.000000] High memory starts at vaddr f6ffe000 [ 0.000000] mapped low ram: 0 - 36ffe000 [ 0.000000] low ram: 0 - 36ffe000 [ 0.000000] node 0 low ram: 00000000 - 36ffe000 [ 0.000000] node 0 bootmap 00018000 - 0001ee00 [ 0.000000] (11 early reservations) ==> bootmem [0000000000 - 0036ffe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000200000 - 0000aeda90] TEXT DATA BSS ==> [0000200000 - 0000aeda90] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [0000aee000 - 0000af65e4] BRK ==> [0000aee000 - 0000af65e4] [ 0.000000] #6 [0000010000 - 0000018000] PGTABLE ==> [0000010000 - 0000018000] [ 0.000000] #7 [0000af7000 - 000121f30a] NEW RAMDISK ==> [0000af7000 - 000121f30a] [ 0.000000] #8 [003f600000 - 003fe00000] KVA RAM [ 0.000000] #9 [0036600000 - 0036e00000] KVA PG ==> [0036600000 - 0036e00000] [ 0.000000] #10 [0000018000 - 000001f000] BOOTMAP ==> [0000018000 - 000001f000] [ 0.000000] found SMP MP-table at [c00f5c10] f5c10 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00036ffe [ 0.000000] HighMem 0x00036ffe -> 0x0003fedf [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003f600 [ 0.000000] 0: 0x0003fe00 -> 0x0003fedf [ 0.000000] On node 0 totalpages: 259694 [ 0.000000] free_area_init_node: node 0, pgdat f6600000, node_mem_map c1220200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 219454 pages, LIFO batch:31 [ 0.000000] HighMem zone: 286 pages used for memmap [ 0.000000] HighMem zone: 34243 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] MPTABLE: OEM ID: OEM00000 [ 0.000000] MPTABLE: Product ID: PROD00000000 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] I/O APIC #4 Version 17 at 0xFEC00000. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Processors: 2 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:b0100000) [ 0.000000] NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:8 [ 0.000000] PERCPU: Embedded 14 pages at c1a25000, static data 34204 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257648 [ 0.000000] Policy zone: HighMem [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-Hitachi_HDT725032VLA380_VFJ201R23XUEXW-part5 nolapic resume=/dev/disk/by-id/ata-Hitachi_HDT725032VLA380_VFJ201R23XUEXW-part1 splash=silent quiet vga=0x31a [ 0.000000] bootsplash: silent mode. [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00036ffe:0003fedf) [ 0.000000] Memory: 1004908k/1047420k available (4719k kernel code, 33868k reserved, 2944k data, 464k init, 138116k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xff5b5000 - 0xfffff000 (10536 kB) [ 0.000000] pkmap : 0xff000000 - 0xff200000 (2048 kB) [ 0.000000] vmalloc : 0xf77fe000 - 0xfeffe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf6ffe000 ( 879 MB) [ 0.000000] .init : 0xc097d000 - 0xc09f1000 ( 464 kB) [ 0.000000] .data : 0xc069bd42 - 0xc097c008 (2944 kB) [ 0.000000] .text : 0xc0200000 - 0xc069bd42 (4719 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1600.444 MHz processor. [ 0.000115] Console: colour dummy device 80x25 [ 0.000120] console [tty0] enabled [ 0.000343] hpet clockevent registered [ 0.000348] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000353] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.88 BogoMIPS (lpj=1600444) [ 0.031296] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved [ 0.031402] Security Framework initialized [ 0.031421] AppArmor: AppArmor initialized [ 0.031448] Mount-cache hash table entries: 512 [ 0.031624] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.031628] CPU: L2 cache: 1024K [ 0.031632] CPU: Physical Processor ID: 0 [ 0.031634] CPU: Processor Core ID: 0 [ 0.031639] mce: CPU supports 6 MCE banks [ 0.031649] CPU0: Thermal monitoring enabled (TM2) [ 0.031654] using mwait in idle threads. [ 0.031660] Performance Counters: Core2 events, Intel PMU driver. [ 0.031667] ... version: 2 [ 0.031669] ... bit width: 40 [ 0.031672] ... generic counters: 2 [ 0.031674] ... value mask: 000000ffffffffff [ 0.031677] ... max period: 000000007fffffff [ 0.031680] ... fixed-purpose counters: 3 [ 0.031682] ... counter mask: 0000000700000003 [ 0.031688] Checking 'hlt' instruction... OK. [ 0.036566] ACPI: Core revision 20090521 [ 0.048671] ACPI: setting ELCR to 0200 (from 0ca8) [ 0.049087] SMP disabled [ 0.049093] Mapping cpu 0 to node 0 [ 0.050040] Brought up 1 CPUs [ 0.050045] Total of 1 processors activated (3200.88 BogoMIPS). [ 0.050090] CPU0 attaching NULL sched-domain. [ 0.052018] devtmpfs: initialized [ 0.052215] Booting paravirtualized kernel on bare hardware [ 0.052501] regulator: core version 0.5 [ 0.052530] Time: 9:17:51 Date: 11/02/09 [ 0.052614] NET: Registered protocol family 16 [ 0.052801] ACPI: bus type pci registered [ 0.052897] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.052901] PCI: MCFG area at f0000000 reserved in E820 [ 0.052904] PCI: Using MMCONFIG for extended config space [ 0.052907] PCI: Using configuration type 1 for base access [ 0.055105] bio: create slab <bio-0> at 0 [ 0.057514] ACPI: EC: Look up EC in DSDT [ 0.070162] ACPI: Interpreter enabled [ 0.070173] ACPI: (supports S0 S1 S3 S4 S5) [ 0.070225] ACPI: Using PIC for interrupt routing [ 0.080232] ACPI: No dock devices found. [ 0.080406] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.080568] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.080573] pci 0000:00:01.0: PME# disabled [ 0.080656] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff] [ 0.080709] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.080714] pci 0000:00:1b.0: PME# disabled [ 0.080768] pci 0000:00:1d.0: reg 20 io port: [0xff00-0xff1f] [ 0.080829] pci 0000:00:1d.1: reg 20 io port: [0xfe00-0xfe1f] [ 0.080888] pci 0000:00:1d.2: reg 20 io port: [0xfd00-0xfd1f] [ 0.080949] pci 0000:00:1d.3: reg 20 io port: [0xfc00-0xfc1f] [ 0.081019] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff] [ 0.081076] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.081082] pci 0000:00:1d.7: PME# disabled [ 0.081280] pci 0000:00:1f.2: reg 10 io port: [0xfb00-0xfb07] [ 0.081288] pci 0000:00:1f.2: reg 14 io port: [0xfa00-0xfa03] [ 0.081296] pci 0000:00:1f.2: reg 18 io port: [0xf900-0xf907] [ 0.081304] pci 0000:00:1f.2: reg 1c io port: [0xf800-0xf803] [ 0.081312] pci 0000:00:1f.2: reg 20 io port: [0xf700-0xf70f] [ 0.081320] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfdffe000-0xfdffe3ff] [ 0.081352] pci 0000:00:1f.2: PME# supported from D3hot [ 0.081357] pci 0000:00:1f.2: PME# disabled [ 0.081413] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] [ 0.081482] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.081494] pci 0000:01:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff] [ 0.081505] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfb000000-0xfbffffff] [ 0.081517] pci 0000:01:00.0: reg 30 32bit mmio: [0xfcfe0000-0xfcffffff] [ 0.081562] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.081636] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfcffffff] [ 0.081643] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.081693] pci 0000:02:01.0: reg 10 32bit mmio: [0xfdeff000-0xfdefffff] [ 0.081761] pci 0000:02:01.0: supports D1 D2 [ 0.081764] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot [ 0.081770] pci 0000:02:01.0: PME# disabled [ 0.081823] pci 0000:02:04.0: reg 10 32bit mmio: [0xfdefe000-0xfdefe7ff] [ 0.081892] pci 0000:02:04.0: supports D1 D2 [ 0.081945] pci 0000:02:08.0: reg 10 32bit mmio: [0xfdefd000-0xfdefdfff] [ 0.081955] pci 0000:02:08.0: reg 14 io port: [0xef00-0xef3f] [ 0.082030] pci 0000:02:08.0: supports D1 D2 [ 0.082033] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.082039] pci 0000:02:08.0: PME# disabled [ 0.082089] pci 0000:00:1e.0: transparent bridge [ 0.082094] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] [ 0.082100] pci 0000:00:1e.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.082123] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.083296] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.106093] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.107062] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.107253] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 0.107425] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.107597] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.108042] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.108215] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.108388] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 *7 9 10 11 12 14 15) [ 0.108696] SCSI subsystem initialized [ 0.108776] libata version 3.00 loaded. [ 0.108886] usbcore: registered new interface driver usbfs [ 0.108913] usbcore: registered new interface driver hub [ 0.108949] usbcore: registered new device driver usb [ 0.109064] PCI: Using ACPI for IRQ routing [ 0.109277] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.109286] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.115496] AppArmor: AppArmor Filesystem Enabled [ 0.115520] pnp: PnP ACPI init [ 0.115543] ACPI: bus type pnp registered [ 0.119423] pnp: PnP ACPI: found 11 devices [ 0.119428] ACPI: ACPI bus type pnp unregistered [ 0.119446] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.119450] system 00:01: ioport range 0x290-0x29f has been reserved [ 0.119455] system 00:01: ioport range 0x294-0x297 has been reserved [ 0.119459] system 00:01: ioport range 0x880-0x88f has been reserved [ 0.119471] system 00:07: ioport range 0x400-0x4bf has been reserved [ 0.119481] system 00:09: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.119490] system 00:0a: iomem range 0xce200-0xcffff has been reserved [ 0.119494] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved [ 0.119499] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved [ 0.119503] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved [ 0.119507] system 00:0a: iomem range 0xfed00000-0xfed000ff has been reserved [ 0.119512] system 00:0a: iomem range 0x3fee0000-0x3fefffff could not be reserved [ 0.119516] system 00:0a: iomem range 0x0-0x9ffff could not be reserved [ 0.119521] system 00:0a: iomem range 0x100000-0x3fedffff could not be reserved [ 0.119525] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.119530] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.119534] system 00:0a: iomem range 0xffb00000-0xffb7ffff has been reserved [ 0.119538] system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved [ 0.119543] system 00:0a: iomem range 0xe0000-0xeffff has been reserved [ 0.156969] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.156973] pci 0000:00:01.0: IO window: disabled [ 0.157725] pci 0000:00:01.0: MEM window: 0xfa000000-0xfcffffff [ 0.158025] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.158035] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.158040] pci 0000:00:1e.0: IO window: 0xe000-0xefff [ 0.158047] pci 0000:00:1e.0: MEM window: 0xfde00000-0xfdefffff [ 0.158052] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.158315] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5 [ 0.158320] PCI: setting IRQ 5 as level-triggered [ 0.158326] pci 0000:00:01.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 [ 0.158333] pci 0000:00:01.0: setting latency timer to 64 [ 0.158343] pci 0000:00:1e.0: setting latency timer to 64 [ 0.158350] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.158354] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.158358] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfcffffff] [ 0.158362] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.158366] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 0.158370] pci_bus 0000:02: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.158373] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.158377] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.158470] NET: Registered protocol family 2 [ 0.158615] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.159068] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.159545] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.159975] TCP: Hash tables configured (established 131072 bind 65536) [ 0.159980] TCP reno registered [ 0.160186] NET: Registered protocol family 1 [ 0.160284] Unpacking initramfs... [ 0.422895] Freeing initrd memory: 7328k freed [ 0.428155] Scanning for low memory corruption every 60 seconds [ 0.428383] audit: initializing netlink socket (disabled) [ 0.428414] type=2000 audit(1257153471.427:1): initialized [ 0.434707] highmem bounce pool size: 64 pages [ 0.434715] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.435758] VFS: Disk quotas dquot_6.5.2 [ 0.435827] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.436029] msgmni has been set to 426 [ 0.436166] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.436171] io scheduler noop registered [ 0.436174] io scheduler anticipatory registered [ 0.436177] io scheduler deadline registered [ 0.436194] io scheduler cfq registered (default) [ 0.436399] pci 0000:01:00.0: Boot video device [ 0.436419] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling [ 0.436816] alloc irq_desc for 24 on node 0 [ 0.436821] alloc kstat_irqs on node 0 [ 0.436833] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.437003] pci-stub: invalid id string "" [ 0.437175] vesafb: framebuffer at 0xe0000000, mapped to 0xf7880000, using 5120k, total 65536k [ 0.437180] vesafb: mode is 1280x1024x16, linelength=2560, pages=1 [ 0.437183] vesafb: protected mode interface info at c000:c6e0 [ 0.437186] vesafb: pmi: set display start = c00cc716, set palette = c00cc780 [ 0.437189] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da [ 0.437214] vesafb: scrolling: redraw [ 0.437218] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.437426] bootsplash 3.1.6-2004/03/31: looking for picture... [ 0.459279] bootsplash: silentjpeg size 130564 bytes [ 0.491753] bootsplash: ...found (1280x1024, 29083 bytes, v3). [ 0.500739] Switched to high resolution mode on CPU 0 [ 0.579817] Console: switching to colour frame buffer device 156x60 [ 0.667318] fb0: VESA VGA frame buffer device [ 0.669624] Non-volatile memory driver v1.3 [ 0.669629] Linux agpgart interface v0.103 [ 0.669673] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.670459] ahci 0000:00:1f.2: version 3.0 [ 0.670689] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.670693] PCI: setting IRQ 11 as level-triggered [ 0.670700] ahci 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.670811] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 0.670816] ahci 0000:00:1f.2: flags: 64bit ncq ilck led clo [ 0.670822] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.671150] scsi0 : ahci [ 0.671286] scsi1 : ahci [ 0.671369] scsi2 : ahci [ 0.671440] scsi3 : ahci [ 0.671631] ata1: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe100 irq 11 [ 0.671636] ata2: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe180 irq 11 [ 0.671640] ata3: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 11 [ 0.671644] ata4: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe280 irq 11 [ 0.671783] Fixed MDIO Bus: probed [ 0.671792] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.672335] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 7 [ 0.672341] PCI: setting IRQ 7 as level-triggered [ 0.672349] ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNK1] -> GSI 7 (level, low) -> IRQ 7 [ 0.672376] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.672382] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.672444] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.676358] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.676369] ehci_hcd 0000:00:1d.7: irq 7, io mem 0xfdfff000 [ 0.686028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.686086] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.686091] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.686096] usb usb1: Product: EHCI Host Controller [ 0.686100] usb usb1: Manufacturer: Linux 2.6.31.5-0.1-desktop ehci_hcd [ 0.686105] usb usb1: SerialNumber: 0000:00:1d.7 [ 0.686252] usb usb1: configuration #1 chosen from 1 choice [ 0.686296] hub 1-0:1.0: USB hub found [ 0.686306] hub 1-0:1.0: 8 ports detected [ 0.686407] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.686429] uhci_hcd: USB Universal Host Controller Interface driver [ 0.687039] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNK1] -> GSI 7 (level, low) -> IRQ 7 [ 0.687054] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.687060] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.687076] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.687107] uhci_hcd 0000:00:1d.0: irq 7, io base 0x0000ff00 [ 0.687171] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.687176] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.687181] usb usb2: Product: UHCI Host Controller [ 0.687185] usb usb2: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd [ 0.687189] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.687300] usb usb2: configuration #1 chosen from 1 choice [ 0.687341] hub 2-0:1.0: USB hub found [ 0.687351] hub 2-0:1.0: 2 ports detected [ 0.688041] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.688051] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.688057] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.688073] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.688103] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000fe00 [ 0.688156] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.688161] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.688165] usb usb3: Product: UHCI Host Controller [ 0.688169] usb usb3: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd [ 0.688174] usb usb3: SerialNumber: 0000:00:1d.1 [ 0.688284] usb usb3: configuration #1 chosen from 1 choice [ 0.688326] hub 3-0:1.0: USB hub found [ 0.688335] hub 3-0:1.0: 2 ports detected [ 0.689303] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3 [ 0.689307] PCI: setting IRQ 3 as level-triggered [ 0.689314] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 3 (level, low) -> IRQ 3 [ 0.689322] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.689327] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.689345] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.689373] uhci_hcd 0000:00:1d.2: irq 3, io base 0x0000fd00 [ 0.689418] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.689421] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.689425] usb usb4: Product: UHCI Host Controller [ 0.689428] usb usb4: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd [ 0.689431] usb usb4: SerialNumber: 0000:00:1d.2 [ 0.689532] usb usb4: configuration #1 chosen from 1 choice [ 0.689573] hub 4-0:1.0: USB hub found [ 0.689582] hub 4-0:1.0: 2 ports detected [ 0.690045] uhci_hcd 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 [ 0.690055] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.690061] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.690077] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.690109] uhci_hcd 0000:00:1d.3: irq 5, io base 0x0000fc00 [ 0.690161] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.690166] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.690171] usb usb5: Product: UHCI Host Controller [ 0.690175] usb usb5: Manufacturer: Linux 2.6.31.5-0.1-desktop uhci_hcd [ 0.690179] usb usb5: SerialNumber: 0000:00:1d.3 [ 0.690288] usb usb5: configuration #1 chosen from 1 choice [ 0.690329] hub 5-0:1.0: USB hub found [ 0.690338] hub 5-0:1.0: 2 ports detected [ 0.690418] Initializing USB Mass Storage driver... [ 0.690461] usbcore: registered new interface driver usb-storage [ 0.690465] USB Mass Storage support registered. [ 0.690504] usbcore: registered new interface driver libusual [ 0.690522] usbcore: registered new interface driver ums-alauda [ 0.690540] usbcore: registered new interface driver ums-cypress [ 0.690557] usbcore: registered new interface driver ums-datafab [ 0.690574] usbcore: registered new interface driver ums-freecom [ 0.690591] usbcore: registered new interface driver ums-isd200 [ 0.690607] usbcore: registered new interface driver ums-jumpshot [ 0.690632] usbcore: registered new interface driver ums-karma [ 0.690651] usbcore: registered new interface driver ums-onetouch [ 0.690668] usbcore: registered new interface driver ums-sddr09 [ 0.690686] usbcore: registered new interface driver ums-sddr55 [ 0.690703] usbcore: registered new interface driver ums-usbat [ 0.690778] PNP: No PS/2 controller found. Probing ports directly. [ 0.691144] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.691152] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.691235] mice: PS/2 mouse device common for all mice [ 0.691388] rtc_cmos 00:04: RTC can wake from S4 [ 0.691449] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.691471] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.691489] cpuidle: using governor ladder [ 0.691492] cpuidle: using governor menu [ 0.691873] usbcore: registered new interface driver hiddev [ 0.691896] usbcore: registered new interface driver usbhid [ 0.691900] usbhid: v2.6:USB HID core driver [ 0.778978] TCP cubic registered [ 0.779066] NET: Registered protocol family 10 [ 0.779706] lo: Disabled Privacy Extensions [ 0.780238] lib80211: common routines for IEEE802.11 drivers [ 0.780242] lib80211_crypt: registered algorithm 'NULL' [ 0.780261] Using IPI No-Shortcut mode [ 0.780375] PM: Checking image partition /dev/disk/by-id/ata-Hitachi_HDT725032VLA380_VFJ201R23XUEXW-part1 [ 0.976040] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.976064] ata4: SATA link down (SStatus 0 SControl 300) [ 0.976094] ata2: SATA link down (SStatus 0 SControl 300) [ 0.976781] ata1.00: ATA-7: Hitachi HDT725032VLA380, V54OA7BA, max UDMA/133 [ 0.976787] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 0.977786] ata1.00: configured for UDMA/133 [ 0.977961] scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5 [ 0.978226] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 0.978294] sd 0:0:0:0: [sda] Write Protect is off [ 0.978298] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.978334] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.978513] sda: sda1 sda2 sda3 sda4 < sda5 > [ 1.029594] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.243029] usb 1-5: new high speed USB device using ehci_hcd and address 5 [ 1.394032] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.397127] ata3.00: ATAPI: TSSTcorpCD/DVDW TS-H653L, 0514, max UDMA/33, ATAPI AN [ 1.397154] ata3.00: applying bridge limits [ 1.400795] ata3.00: configured for UDMA/33 [ 1.402677] scsi 2:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H653L 0514 PQ: 0 ANSI: 5 [ 1.402874] PM: Resume from disk failed. [ 1.402897] registered taskstats version 1 [ 1.403044] Magic number: 1:851:271 [ 1.403114] rtc_cmos 00:04: setting system clock to 2009-11-02 09:18:01 UTC (1257153481) [ 1.403248] Freeing unused kernel memory: 464k freed [ 1.403476] Write protecting the kernel text: 4720k [ 1.403639] Write protecting the kernel read-only data: 2704k [ 1.454611] ACPI: SSDT 3fee7e40 00175 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 1.455061] processor LNXCPU:00: registered as cooling_device0 [ 1.460360] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.460382] ACPI: Thermal Zone [THRM] (40 C) [ 1.463615] fan PNP0C0B:00: registered as cooling_device1 [ 1.463623] ACPI: Fan [FAN] (on) [ 1.471150] udev: starting version 146 [ 1.520971] usb 1-5: New USB device found, idVendor=15a9, idProduct=0004 [ 1.520976] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.520981] usb 1-5: Product: 802.11 bg WLAN [ 1.520984] usb 1-5: Manufacturer: Ralink [ 1.521136] usb 1-5: configuration #1 chosen from 1 choice [ 1.623042] usb 1-8: new high speed USB device using ehci_hcd and address 6 [ 1.755850] usb 1-8: New USB device found, idVendor=0bda, idProduct=0111 [ 1.755858] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.755863] usb 1-8: Product: USB2.0-CRW [ 1.755867] usb 1-8: Manufacturer: Generic [ 1.755871] usb 1-8: SerialNumber: 20021111153705700 [ 1.756059] usb 1-8: configuration #1 chosen from 1 choice [ 1.757796] scsi4 : SCSI emulation for USB Mass Storage devices [ 1.758219] usb-storage: device found at 6 [ 1.758222] usb-storage: waiting for device to settle before scanning [ 1.881989] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 1.881997] PM: Basic memory bitmaps created [ 1.895868] PM: Basic memory bitmaps freed [ 1.957001] PM: Starting manual resume from disk [ 1.957037] PM: Resume from partition 8:1 [ 1.957040] PM: Checking hibernation image. [ 1.957211] PM: Resume from disk failed. [ 1.964049] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 2.151227] usb 2-1: New USB device found, idVendor=03f0, idProduct=7e04 [ 2.151234] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.151239] usb 2-1: Product: Deskjet F4100 series [ 2.151243] usb 2-1: Manufacturer: HP [ 2.151247] usb 2-1: SerialNumber: CN7592H1KH04TJ [ 2.151400] usb 2-1: configuration #1 chosen from 1 choice [ 2.331856] kjournald starting. Commit interval 15 seconds [ 2.343742] EXT3 FS on sda5, internal journal [ 2.343751] EXT3-fs: mounted filesystem with ordered data mode. [ 2.360040] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 2.527232] usb 3-1: New USB device found, idVendor=03f0, idProduct=0f0c [ 2.527239] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.527244] usb 3-1: Product: USB Multimedia Cordless Kit [ 2.527248] usb 3-1: Manufacturer: BTC [ 2.527403] usb 3-1: configuration #1 chosen from 1 choice [ 2.545617] input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input0 [ 2.545710] generic-usb 0003:03F0:0F0C.0001: input,hidraw0: USB HID v1.11 Keyboard [BTC USB Multimedia Cordless Kit] on usb-0000:00:1d.1-1/input0 [ 2.581875] input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input1 [ 2.582073] generic-usb 0003:03F0:0F0C.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [BTC USB Multimedia Cordless Kit] on usb-0000:00:1d.1-1/input1 [ 2.764680] scsi 4:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS [ 2.771434] scsi 4:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS [ 2.778934] scsi 4:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS [ 2.780653] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 2.787305] scsi 4:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS [ 2.788043] usb 3-2: new full speed USB device using uhci_hcd and address 3 [ 2.789973] sd 4:0:0:1: [sdc] Attached SCSI removable disk [ 2.790774] sd 4:0:0:2: [sdd] Attached SCSI removable disk [ 2.791932] usb-storage: device scan complete [ 2.791964] sd 4:0:0:3: [sde] Attached SCSI removable disk [ 2.940247] usb 3-2: New USB device found, idVendor=0c45, idProduct=182e [ 2.940253] usb 3-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 2.940259] usb 3-2: Product: USB Headset [ 2.940263] usb 3-2: Manufacturer: GENERIC [ 2.940398] usb 3-2: configuration #1 chosen from 1 choice [ 2.947329] input: GENERIC USB Headset as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.3/input/input2 [ 2.947456] generic-usb 0003:0C45:182E.0003: input,hidraw2: USB HID v1.00 Device [GENERIC USB Headset] on usb-0000:00:1d.1-2/input3 [ 4.114162] udev: starting version 146 [ 4.208062] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 4.208125] ACPI: Power Button [PWRF] [ 4.208204] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 [ 4.208240] ACPI: Power Button [PWRB] [ 4.334879] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.334924] scsi 2:0:0:0: Attached scsi generic sg1 type 5 [ 4.334972] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 4.335033] sd 4:0:0:1: Attached scsi generic sg3 type 0 [ 4.335076] sd 4:0:0:2: Attached scsi generic sg4 type 0 [ 4.335118] sd 4:0:0:3: Attached scsi generic sg5 type 0 [ 4.513155] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 4.513160] e100: Copyright(c) 1999-2006 Intel Corporation [ 4.514503] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 [ 4.514508] PCI: setting IRQ 10 as level-triggered [ 4.514515] e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10 [ 4.526029] iTCO_vendor_support: vendor-support=0 [ 4.532303] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.532309] Uniform CD-ROM driver Revision: 3.20 [ 4.532461] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 4.553987] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 4.564441] e100 0000:02:08.0: PME# disabled [ 4.565516] e100: eth0: e100_probe: addr 0xfdefd000, irq 10, MAC addr 00:1b:fc:7f:c1:ef [ 5.472640] nvidia: module license 'NVIDIA' taints kernel. [ 5.472647] Disabling lock debugging due to kernel taint [ 5.509543] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 5.509647] iTCO_wdt: Found a ICH7DH TCO device (Version=2, TCOBASE=0x0460) [ 5.509722] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 5.697440] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 5.775052] ohci1394 0000:02:01.0: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10 [ 5.777701] nvidia 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 [ 5.777711] nvidia 0000:01:00.0: setting latency timer to 64 [ 5.778206] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009 [ 5.826066] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[fdeff000-fdeff7ff] Max Packet=[1024] IR/IT contexts=[8/8] [ 5.829601] cfg80211: Calling CRDA to update world regulatory domain [ 6.285321] Linux video capture interface: v2.00 [ 6.600729] HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 [ 6.600767] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 6.692702] usbcore: registered new interface driver snd-usb-audio [ 6.826982] saa7130/34: v4l2 driver version 0.2.15 loaded [ 6.835073] saa7134 0000:02:04.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5 [ 6.835085] saa7133[0]: found at 0000:02:04.0, rev: 209, irq: 5, latency: 32, mmio: 0xfdefe000 [ 6.835094] saa7133[0]: subsystem: 1043:4871, board: ASUS P7131 4871 [card=111,autodetected] [ 6.835132] saa7133[0]: board init: gpio is 0 [ 6.835145] IRQ 5/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 6.841280] hda_codec: ALC888: BIOS auto-probing. [ 6.841288] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3881: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) [ 6.841295] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3885: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.841301] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3889: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 6.841318] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3890: mono: mono_out=0x0 [ 6.841323] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3893: dig-out=0x1e/0x0 [ 6.841338] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3901: inputs: mic=0x18, fmic=0x0, line=0x1a, fline=0x0, cd=0x0, aux=0x0 [ 6.842298] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/patch_realtek.c:1282: realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d [ 6.842304] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/patch_realtek.c:1357: realtek: Enable default setup for auto mode as fallback [ 6.842396] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 6.983027] saa7133[0]: i2c eeprom 00: 43 10 71 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 6.983053] saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff [ 6.983076] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 00 01 03 08 ff 00 cf ff ff ff ff [ 6.983099] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983123] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 22 15 50 ff ff ff ff ff ff [ 6.983146] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983169] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983192] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983215] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983243] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983260] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983278] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983295] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983312] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983329] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983346] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.983366] i2c-adapter i2c-1: Invalid 7-bit address 0x7a [ 7.017513] usblp1: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7E04 [ 7.017553] usbcore: registered new interface driver usblp [ 7.085234] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000151d97a] [ 7.348160] tuner 1-004b: chip found @ 0x96 (saa7133[0]) [ 7.383465] tda829x 1-004b: setting tuner address to 61 [ 7.447021] tda829x 1-004b: type set to tda8290+75a [ 7.697299] phy0: Selected rate control algorithm 'minstrel' [ 7.698340] Registered led device: rt73usb-phy0::radio [ 7.698364] Registered led device: rt73usb-phy0::assoc [ 7.698386] Registered led device: rt73usb-phy0::quality [ 7.698877] usbcore: registered new interface driver rt73usb [ 10.146211] saa7133[0]: registered device video0 [v4l2] [ 10.146302] saa7133[0]: registered device vbi0 [ 10.275642] dvb_init() allocating 1 frontend [ 10.308164] DVB: registering new adapter (saa7133[0]) [ 10.308171] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)... [ 10.344025] tda1004x: setting up plls for 48MHz sampling clock [ 12.518025] tda1004x: timeout waiting for DSP ready [ 12.528024] tda1004x: found firmware revision 0 -- invalid [ 12.528028] tda1004x: trying to boot from eeprom [ 14.835026] tda1004x: timeout waiting for DSP ready [ 14.845024] tda1004x: found firmware revision 0 -- invalid [ 14.845028] tda1004x: waiting for firmware upload... [ 14.845036] saa7134 0000:02:04.0: firmware: requesting dvb-fe-tda10046.fw [ 14.888919] saa7134 0000:02:04.0: firmware: requesting dvb-fe-tda10045.fw [ 14.902980] tda1004x: no firmware upload (timeout or file not found?) [ 14.902998] tda1004x: firmware upload failed [ 15.035600] saa7134 ALSA driver for DMA sound loaded [ 15.035616] IRQ 5/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 15.035646] saa7133[0]/alsa: saa7133[0] at 0xfdefe000 irq 5 registered as card -1 [ 15.114686] Adding 2104472k swap on /dev/sda1. Priority:-1 extents:1 across:2104472k [ 15.682505] device-mapper: uevent: version 1.0.3 [ 15.683134] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 15.990096] loop: module loaded [ 16.016820] kjournald starting. Commit interval 15 seconds [ 16.016837] EXT3-fs: mounted filesystem with ordered data mode. [ 16.053433] EXT3-fs: mounted filesystem with ordered data mode. [ 16.056215] kjournald starting. Commit interval 15 seconds [ 16.278252] fuse init (API version 7.12) [ 18.967337] powernow: This module only works with AMD K7 CPUs [ 19.577956] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 21.704172] e100: eth0 NIC Link is Up 100 Mbps Full Duplex [ 21.704490] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 22.221026] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 28.437467] bootsplash: status on console 0 changed to on [ 32.215017] eth0: no IPv6 routers present [ 39.186601] CPU0 attaching NULL sched-domain. [ 39.186677] CPU0 attaching NULL sched-domain. It shows that two CPUs are found initialy, but that only one is initialized. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=551641 http://bugzilla.novell.com/show_bug.cgi?id=551641#c4 Jeff Mahoney <jeffm@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Priority|P5 - None |P2 - High CC| |jeffm@novell.com AssignedTo|kernel-maintainers@forge.pr |jeffm@novell.com |ovo.novell.com | Summary|Kernel thinks it has |Kernel crashes booting in |Transmeta CPU instead of |SMP mode on HP Pavilion |Intel and shows only one |Slimline s3160.nl desktop |instead of two CPU-cores | --- Comment #4 from Jeff Mahoney <jeffm@novell.com> 2009-12-02 21:51:20 UTC --- The obvious problems with the report have been corrected in the forums and on the kernel.org bug report, so I'll update them here for clarity: - The kernel isn't detecting a Transmeta CPU, it's just listing the supported CPU types on boot - The successful boot is with nolapic, which disables SMP mode - Another successful boot with maxcpus=1 Henk, in the future, please don't paste the entire dmesg output as a comment. It clutters the report with mostly irrelevant information that's hard to work with inside the browser. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=551641 http://bugzilla.novell.com/show_bug.cgi?id=551641#c5 --- Comment #5 from Henk van Velden <henk.vanvelden@xs4all.nl> 2009-12-03 10:45:03 UTC --- Sorry about the complete dmesg. I did this because the earlier grep'ed output let us jump to the wrong conclusion (about Tansmeta). Your recap is correct. Thanks. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
http://bugzilla.novell.com/show_bug.cgi?id=551641 http://bugzilla.novell.com/show_bug.cgi?id=551641#c Jeff Mahoney <jeffm@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|jeffm@novell.com |rjw@novell.com -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=551641 https://bugzilla.novell.com/show_bug.cgi?id=551641#c6 Rafael Wysocki <rjw@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO InfoProvider| |henk.vanvelden@xs4all.nl --- Comment #6 from Rafael Wysocki <rjw@novell.com> 2010-09-21 23:19:08 UTC --- Can you please tell me what the status of this bug is? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=551641 https://bugzilla.novell.com/show_bug.cgi?id=551641#c7 --- Comment #7 from Henk van Velden <henk.vanvelden@xs4all.nl> 2010-09-22 08:33:37 UTC --- It was a regression. Patched in 2.6.33-rc2. Booting in openSUSE 11.3 did not repeat the problem, so I guess it can be seen as Solved. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=551641 https://bugzilla.novell.com/show_bug.cgi?id=551641#c8 Rafael Wysocki <rjw@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |RESOLVED InfoProvider|henk.vanvelden@xs4all.nl | Resolution| |FIXED --- Comment #8 from Rafael Wysocki <rjw@novell.com> 2010-09-22 18:57:36 UTC --- Great, closing. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
participants (1)
-
bugzilla_noreply＠novell.com