http://bugzilla.opensuse.org/show_bug.cgi?id=1111076 http://bugzilla.opensuse.org/show_bug.cgi?id=1111076#c1 Takashi Iwai changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |tiwai@suse.com --- Comment #1 from Takashi Iwai --- I guess you're using VirtualBox, not VMware, right? The screenshot doesn't show anything obviously wrong, so I wonder where it gets stuck. What message would have followed at the last point in the screenshot? -- You are receiving this mail because: You are on the CC list for the bug.

http://bugzilla.opensuse.org/show_bug.cgi?id=1111076 http://bugzilla.opensuse.org/show_bug.cgi?id=1111076#c3 robert spitzenpfeil changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |madworm_de.novell@spitzenpf | |eil.org --- Comment #3 from robert spitzenpfeil --- Created attachment 785588 --> http://bugzilla.opensuse.org/attachment.cgi?id=785588&action=edit screenshot I'm affected as well. Currently trying the Tumbleweed kernel -- You are receiving this mail because: You are on the CC list for the bug.

http://bugzilla.opensuse.org/show_bug.cgi?id=1111076 http://bugzilla.opensuse.org/show_bug.cgi?id=1111076#c5 --- Comment #5 from Takashi Iwai --- btrfs might be another problem. Pascal, could you get the full messages with the new kernel until the hanging point via serial console or whatever? Also try to remove "quiet" option to be more verbose. I'm wondering whether the resume disk was already found in your case. The working kernel probed /dev/disk/by-id/ata-VBOX_HARDDISK_VB279c1d70-8b51bf95-part4 before "PM: Starting manual resume from disk" line, at least. In anyway, for both of you, it'b be helpful to get the boot outputs in text (for both working and broken kernels), and attach to Bugzilla. Also, please check the kernel in OBS Kernel:openSUSE-15.0 repo, too. It's the latest build. http://download.opensuse.org/repositories/Kernel:/openSUSE-15.0/standard/ Although I guess it won't change, it's still worth to check beforehand. -- You are receiving this mail because: You are on the CC list for the bug.

http://bugzilla.opensuse.org/show_bug.cgi?id=1111076 http://bugzilla.opensuse.org/show_bug.cgi?id=1111076#c7 --- Comment #7 from robert spitzenpfeil --- kernel-default-4.12.14-lp150.140.1.g2f76ea2.x86_64 is no different. -- You are receiving this mail because: You are on the CC list for the bug.

http://bugzilla.opensuse.org/show_bug.cgi?id=1111076 http://bugzilla.opensuse.org/show_bug.cgi?id=1111076#c9 --- Comment #9 from robert spitzenpfeil --- Created attachment 785608 --> http://bugzilla.opensuse.org/attachment.cgi?id=785608&action=edit serial console log Removing "splash=silent quit showopts" got it to display some more stuff (even without the serial console), but it got stuck later anyways. -- You are receiving this mail because: You are on the CC list for the bug.

http://bugzilla.opensuse.org/show_bug.cgi?id=1111076 Takashi Iwai changed: What |Removed |Added ---------------------------------------------------------------------------- Summary|Cannot boot with the last |VirtualBox video driver |kernel 4.12.14-lp150.12.19 |crashes with the last | |kernel 4.12.14-lp150.12.19 -- You are receiving this mail because: You are on the CC list for the bug.

http://bugzilla.opensuse.org/show_bug.cgi?id=1111076 http://bugzilla.opensuse.org/show_bug.cgi?id=1111076#c17 --- Comment #17 from David Rankin --- Note: Btrfs isn't an issue. My install is ext4 only and I'm still affected by this problem. -- You are receiving this mail because: You are on the CC list for the bug.

http://bugzilla.opensuse.org/show_bug.cgi?id=1111076 http://bugzilla.opensuse.org/show_bug.cgi?id=1111076#c19 --- Comment #19 from Takashi Iwai --- Still no one tested the fix package? I can merge the fix only when someone really tests it, so it's still kept unfixed. -- You are receiving this mail because: You are on the CC list for the bug.

http://bugzilla.opensuse.org/show_bug.cgi?id=1111076 http://bugzilla.opensuse.org/show_bug.cgi?id=1111076#c21 --- Comment #21 from robert spitzenpfeil --- 4.12.14-lp150.2.g01eb812-default boots fine. Nothing obviously wrong with it. -- You are receiving this mail because: You are on the CC list for the bug.

http://bugzilla.opensuse.org/show_bug.cgi?id=1111076 http://bugzilla.opensuse.org/show_bug.cgi?id=1111076#c23 --- Comment #23 from David Rankin --- @Tony Su I'm confused. When you say: "you do not have to remove the latest kernel for LEAP 15, you only need to remove the pre-compiled Virtualbox kernel modules, and then you can run the latest kernel in a Virtualbox Guest without a problem." Do you mean remove all virtualbox-guest modules for all PRIOR kernels, e.g. virtualbox-guest-kmp-default-5.2.18_k4.12.14_lp150.12.16-lp150.4.17.1.x86_64 virtualbox-guest-tools-5.2.18-lp150.4.17.1.x86_64 virtualbox-guest-x11-5.2.18-lp150.4.17.1.x86_64 Thus breaking multiversion, or do you mean some other versions? If this is the case is your advice to remove all prior kernels as well, since they will be unusable in the VM? -- You are receiving this mail because: You are on the CC list for the bug.

http://bugzilla.opensuse.org/show_bug.cgi?id=1111076 James PEARSON changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |pearson45j@gmail.com -- You are receiving this mail because: You are on the CC list for the bug.

http://bugzilla.opensuse.org/show_bug.cgi?id=1111076 http://bugzilla.opensuse.org/show_bug.cgi?id=1111076#c28 Andreas Stieger changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |joe_morris@ntm.org --- Comment #28 from Andreas Stieger --- *** Bug 1111745 has been marked as a duplicate of this bug. *** -- You are receiving this mail because: You are on the CC list for the bug.

http://bugzilla.opensuse.org/show_bug.cgi?id=1111076 http://bugzilla.opensuse.org/show_bug.cgi?id=1111076#c37 --- Comment #37 from James PEARSON --- Hello I had a fully working situation on fully updated Leap 15.0 fresh install done today on virtualbox using the kernel repo as I explained here [1] [1] https://lists.opensuse.org/opensuse/2018-10/msg00280.html I just tried the same method by adding ) removing the kernel repo 2) adding "http://download.opensuse.org/repositories/home:/tiwai:/bsc1111076/standard/" as a repository instead Next I did a zypper dup from the new repo No problem when I rebooted my Leap 15.0 guest on virtualbox My Shared Folders (Leap 15.0 guest <=> Leap 15.0 host) are still working :) To resume, using either the kernel repo repository or the tiwai repository solved the problem for me. For more info on what I did exactly, please see below ########## zypper addrepo --refresh --name "openSUSE-Leap-15-tiwai" http://download.opensuse.org/repositories/home:/tiwai:/bsc1111076/standard/ repo-tiwai zypper mr -p 95 "repo-tiwai" zypper ref --force linux-u44b:~ # zypper dup --from "repo-tiwai" Loading repository data... Reading installed packages... Computing distribution upgrade... 4 Problems: Problem: problem with installed package kernel-default-4.12.14-lp150.144.1.g09415e8.x86_64 Problem: problem with installed package kernel-default-devel-4.12.14-lp150.144.1.g09415e8.x86_64 Problem: problem with installed package kernel-devel-4.12.14-lp150.144.1.g09415e8.noarch Problem: problem with installed package kernel-macros-4.12.14-lp150.144.1.g09415e8.noarch Problem: problem with installed package kernel-default-4.12.14-lp150.144.1.g09415e8.x86_64 Solution 1: Following actions will be done: install kernel-default-4.12.14-lp150.2.1.g01eb812.x86_64 (with vendor change) obs://build.opensuse.org/Kernel --> obs://build.opensuse.org/home:tiwai deinstallation of kernel-default-4.12.14-lp150.144.1.g09415e8.x86_64 Solution 2: keep obsolete kernel-default-4.12.14-lp150.144.1.g09415e8.x86_64 Choose from above solutions by number or skip, retry or cancel [1/2/s/r/c] (c): 1 Problem: problem with installed package kernel-default-devel-4.12.14-lp150.144.1.g09415e8.x86_64 Solution 1: Following actions will be done: install kernel-default-devel-4.12.14-lp150.2.1.g01eb812.x86_64 (with vendor change) obs://build.opensuse.org/Kernel --> obs://build.opensuse.org/home:tiwai deinstallation of kernel-default-devel-4.12.14-lp150.144.1.g09415e8.x86_64 Solution 2: keep obsolete kernel-default-devel-4.12.14-lp150.144.1.g09415e8.x86_64 Choose from above solutions by number or skip, retry or cancel [1/2/s/r/c] (c): 1 Problem: problem with installed package kernel-devel-4.12.14-lp150.144.1.g09415e8.noarch Solution 1: Following actions will be done: install kernel-devel-4.12.14-lp150.2.1.g01eb812.noarch (with vendor change) obs://build.opensuse.org/Kernel --> obs://build.opensuse.org/home:tiwai deinstallation of kernel-devel-4.12.14-lp150.144.1.g09415e8.noarch Solution 2: keep obsolete kernel-devel-4.12.14-lp150.144.1.g09415e8.noarch Choose from above solutions by number or skip, retry or cancel [1/2/s/r/c] (c): 1 Problem: problem with installed package kernel-macros-4.12.14-lp150.144.1.g09415e8.noarch Solution 1: install kernel-macros-4.12.14-lp150.2.1.g01eb812.noarch (with vendor change) obs://build.opensuse.org/Kernel --> obs://build.opensuse.org/home:tiwai Solution 2: keep obsolete kernel-macros-4.12.14-lp150.144.1.g09415e8.noarch Choose from above solutions by number or skip, retry or cancel [1/2/s/r/c] (c): 1 Resolving dependencies... Computing distribution upgrade... The following 3 NEW packages are going to be installed: kernel-default-4.12.14-lp150.2.1.g01eb812 kernel-default-devel-4.12.14-lp150.2.1.g01eb812 kernel-devel-4.12.14-lp150.2.1.g01eb812 The following 3 packages are going to be REMOVED: kernel-default-4.12.14-lp150.144.1.g09415e8 kernel-default-devel-4.12.14-lp150.144.1.g09415e8 kernel-devel-4.12.14-lp150.144.1.g09415e8 The following package is going to be downgraded: kernel-macros The following package is going to change vendor: kernel-macros obs://build.opensuse.org/Kernel -> obs://build.opensuse.org/home:tiwai 1 package to downgrade, 3 new, 3 to remove, 1 to change vendor. Overall download size: 80.7 MiB. Already cached: 0 B. After the operation, additional 2.0 MiB will be used. dracut: *** Creating image file '/boot/initrd-4.12.14-lp150.2.g01eb812-default' *** dracut: *** Creating initramfs image file '/boot/initrd-4.12.14-lp150.2.g01eb812-default' done *** (4/7) Installing: kernel-macros-4.12.14-lp150.2.1.g01eb812.noarch .............................................................................................................................................................................................[done] (5/7) Removing kernel-devel-4.12.14-lp150.144.1.g09415e8.noarch ...............................................................................................................................................................................................[done] (6/7) Installing: kernel-devel-4.12.14-lp150.2.1.g01eb812.noarch ..............................................................................................................................................................................................[done] (7/7) Installing: kernel-default-devel-4.12.14-lp150.2.1.g01eb812.x86_64 ......................................................................................................................................................................................[done] There are some running programs that might use files deleted by recent upgrade. You may wish to check and restart some of them. Run 'zypper ps -s' to list these programs. linux-u44b:~ # reboot -- You are receiving this mail because: You are on the CC list for the bug.

http://bugzilla.opensuse.org/show_bug.cgi?id=1111076 http://bugzilla.opensuse.org/show_bug.cgi?id=1111076#c46 --- Comment #46 from James PEARSON --- Hello Just did another new fresh install of openSUSE-Leap-15 on virtualbox this evening using the openSUSE-Leap-15.0-DVD-x86_64.iso medium (as per usual- 99% of the time - this is to answer a question asked The host is openSUSE-Leap-15 To resume, "tiwai:/bsc111107" repo works fine on a ***fresh install*** of Leap 15.0 on Virtualbox On first boot, I had the possibility of installing two security updates 1017 et 1024 I ignored them - instead I added the tiwai:/bsc1111076 directory and ran all the commands below zypper addrepo --refresh --name "openSUSE-Leap-15-tiwai" http://download.opensuse.org/repositories/home:/tiwai:/bsc1111076/standard/ repo-tiwai zypper mr -p 95 "repo-tiwai" zypper ref --force zypper dup --from "repo-tiwai" zypper up Once done I reboot with no problems No problem when I rebooted my Leap 15.0 guest on virtualbox I ran yast2 and added the vboxguest and vboxsf groups to my user, etc and installed the VBoxGuestAdditions using VBoxGuestAdditions_5.2.18.iso and setup my Shared Folders My Shared Folders (Leap 15.0 guest <=> Leap 15.0 host) work :) The bottom line for me is that the "tiwai:/bsc111107" works fine on a fresh install of Leap 15.0 when you do a zypper dup --from tiwai (right away after the fresh install) For more info see details below (sorry for the long posts) ######## linux-4yai:~ # zypper addrepo --refresh --name "openSUSE-Leap-15-tiwai" http://download.opensuse.org/repositories/home:/tiwai:/bsc1111076/standard/ repo-tiwai Adding repository 'openSUSE-Leap-15-tiwai' ..............................................................................................................................................................................................................................[done] Repository 'openSUSE-Leap-15-tiwai' successfully added URI : http://download.opensuse.org/repositories/home:/tiwai:/bsc1111076/standard/ Enabled : Yes GPG Check : Yes Autorefresh : Yes Priority : 99 (default priority) Repository priorities are without effect. All enabled repositories share the same priority. linux-4yai:~ # zypper mr -p 95 "repo-tiwai" Repository 'repo-tiwai' priority has been set to 95. linux-4yai:~ # zypper ref --force Forcing raw metadata refresh Retrieving repository 'openSUSE-Leap-15.0-Non-Oss' metadata .............................................................................................................................................................................................................[done] Forcing building of repository cache Building repository 'openSUSE-Leap-15.0-Non-Oss' cache ..................................................................................................................................................................................................................[done] Forcing raw metadata refresh Retrieving repository 'openSUSE-Leap-15.0-Oss' metadata .................................................................................................................................................................................................................[done] Forcing building of repository cache Building repository 'openSUSE-Leap-15.0-Oss' cache ......................................................................................................................................................................................................................[done] Forcing raw metadata refresh Retrieving repository 'openSUSE-Leap-15-tiwai' metadata --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------[\] New repository or package signing key received: Repository: openSUSE-Leap-15-tiwai Key Name: home:tiwai OBS Project home:tiwai@build.opensuse.org Key Fingerprint: 6D47B848 164A7937 AF9C9CC1 4BF05F46 F6E74BF5 Key Created: Sat Nov 18 17:46:38 2017 Key Expires: Mon Jan 27 17:46:38 2020 Rpm Name: gpg-pubkey-f6e74bf5-5a1063ee Do you want to reject the key, trust temporarily, or trust always? [r/t/a/? shows all options] (r): a Retrieving repository 'openSUSE-Leap-15-tiwai' metadata .................................................................................................................................................................................................................[done] Forcing building of repository cache Building repository 'openSUSE-Leap-15-tiwai' cache ......................................................................................................................................................................................................................[done] Forcing raw metadata refresh Retrieving repository 'openSUSE-Leap-15.0-Update' metadata ..............................................................................................................................................................................................................[done] Forcing building of repository cache Building repository 'openSUSE-Leap-15.0-Update' cache ...................................................................................................................................................................................................................[done] Forcing raw metadata refresh Retrieving repository 'openSUSE-Leap-15.0-Update-Non-Oss' metadata ......................................................................................................................................................................................................[done] Forcing building of repository cache Building repository 'openSUSE-Leap-15.0-Update-Non-Oss' cache ...........................................................................................................................................................................................................[done] All repositories have been refreshed. linux-4yai:~ # zypper dup --from "repo-tiwai" Loading repository data... Reading installed packages... Computing distribution upgrade... Problem: problem with installed package kernel-default-4.12.14-lp150.11.4.x86_64 Solution 1: Following actions will be done: install kernel-default-4.12.14-lp150.2.1.g01eb812.x86_64 (with vendor change) openSUSE --> obs://build.opensuse.org/home:tiwai deinstallation of kernel-default-4.12.14-lp150.11.4.x86_64 Solution 2: install kernel-default-4.12.14-lp150.12.19.2.x86_64 from excluded repository Choose from above solutions by number or cancel [1/2/c] (c): 1 Resolving dependencies... Computing distribution upgrade... The following NEW package is going to be installed: kernel-default-4.12.14-lp150.2.1.g01eb812 The following package is going to be REMOVED: kernel-default-4.12.14-lp150.11.4 The following 3 packages are going to be upgraded: virtualbox-guest-kmp-default virtualbox-guest-tools virtualbox-guest-x11 3 packages to upgrade, 1 new, 1 to remove. Overall download size: 60.4 MiB. Already cached: 0 B. After the operation, additional 2.1 MiB will be used. Continue? [y/n/...? shows all options] (y): y Retrieving package kernel-default-4.12.14-lp150.2.1.g01eb812.x86_64 (1/4), 58.2 MiB (300.3 MiB unpacked) Retrieving: kernel-default-4.12.14-lp150.2.1.g01eb812.x86_64.rpm ............................................................................................................................................................................................[done (1.2 MiB/s)] Retrieving package virtualbox-guest-kmp-default-5.2.18_k4.12.14_lp150.12.16-lp150.4.17.1.x86_64 (2/4), 429.5 KiB (757.7 KiB unpacked) Retrieving: virtualbox-guest-kmp-default-5.2.18_k4.12.14_lp150.12.16-lp150.4.17.1.x86_64.rpm ............................................................................................................................................................................[done] Retrieving package virtualbox-guest-tools-5.2.18-lp150.4.17.1.x86_64 (3/4), 605.2 KiB ( 1.8 MiB unpacked) Retrieving: virtualbox-guest-tools-5.2.18-lp150.4.17.1.x86_64.rpm ...........................................................................................................................................................................................[done (1.4 MiB/s)] Retrieving package virtualbox-guest-x11-5.2.18-lp150.4.17.1.x86_64 (4/4), 1.2 MiB ( 6.2 MiB unpacked) Retrieving: virtualbox-guest-x11-5.2.18-lp150.4.17.1.x86_64.rpm .........................................................................................................................................................................................................[done] Checking for file conflicts: ............................................................................................................................................................................................................................................[done] (1/5) Installing: kernel-default-4.12.14-lp150.2.1.g01eb812.x86_64 ......................................................................................................................................................................................................[done] Additional rpm output: Creating initrd: /boot/initrd-4.12.14-lp150.2.g01eb812-default dracut: Executing: /usr/bin/dracut --logfile /var/log/YaST2/mkinitrd.log --force /boot/initrd-4.12.14-lp150.2.g01eb812-default 4.12.14-lp150.2.g01eb812-default dracut: *** Including module: bash *** dracut: *** Including module: systemd *** dracut: *** Including module: warpclock *** dracut: *** Including module: systemd-initrd *** dracut: *** Including module: i18n *** dracut: Could not find FONT_MAP none! dracut: *** Including module: drm *** dracut: *** Including module: plymouth *** dracut: *** Including module: kernel-modules *** dracut: *** Including module: resume *** dracut: *** Including module: rootfs-block *** dracut: *** Including module: terminfo *** dracut: *** Including module: udev-rules *** dracut: Skipping udev rule: 40-redhat.rules dracut: Skipping udev rule: 50-firmware.rules dracut: Skipping udev rule: 50-udev.rules dracut: Skipping udev rule: 91-permissions.rules dracut: Skipping udev rule: 80-drivers-modprobe.rules dracut: *** Including module: dracut-systemd *** dracut: *** Including module: haveged *** dracut: *** Including module: ostree *** dracut: *** Including module: usrmount *** dracut: *** Including module: base *** dracut: *** Including module: fs-lib *** dracut: *** Including module: shutdown *** dracut: *** Including module: suse *** dracut: *** Including modules done *** dracut: *** Installing kernel module dependencies and firmware *** dracut: *** Installing kernel module dependencies and firmware done *** dracut: *** Resolving executable dependencies *** dracut: *** Resolving executable dependencies done*** dracut: *** Hardlinking files *** dracut: *** Hardlinking files done *** dracut: *** Stripping files *** dracut: *** Stripping files done *** dracut: *** Generating early-microcode cpio image *** dracut: *** Constructing AuthenticAMD.bin **** dracut: *** Store current command line parameters *** dracut: Stored kernel commandline: dracut: resume=UUID=97f30bf8-8f50-4787-9fe6-3290cb7048aa dracut: root=UUID=3a165b8b-3e3a-412d-bf54-d95ae6fc95bb rootfstype=ext4 rootflags=rw,relatime,data=ordered dracut: *** Creating image file '/boot/initrd-4.12.14-lp150.2.g01eb812-default' *** dracut: *** Creating initramfs image file '/boot/initrd-4.12.14-lp150.2.g01eb812-default' done *** (2/5) Installing: virtualbox-guest-kmp-default-5.2.18_k4.12.14_lp150.12.16-lp150.4.17.1.x86_64 ..........................................................................................................................................................................[done] Additional rpm output: cat: write error: Broken pipe cat: write error: Broken pipe Creating initrd: /boot/initrd-4.12.14-lp150.11-default dracut: Executing: /usr/bin/dracut --logfile /var/log/YaST2/mkinitrd.log --force /boot/initrd-4.12.14-lp150.11-default 4.12.14-lp150.11-default dracut: *** Including module: bash *** dracut: *** Including module: systemd *** dracut: *** Including module: warpclock *** dracut: *** Including module: systemd-initrd *** dracut: *** Including module: i18n *** dracut: Could not find FONT_MAP none! dracut: *** Including module: drm *** dracut: *** Including module: plymouth *** dracut: *** Including module: kernel-modules *** dracut: *** Including module: resume *** dracut: *** Including module: rootfs-block *** dracut: *** Including module: terminfo *** dracut: *** Including module: udev-rules *** dracut: Skipping udev rule: 40-redhat.rules dracut: Skipping udev rule: 50-firmware.rules dracut: Skipping udev rule: 50-udev.rules dracut: Skipping udev rule: 91-permissions.rules dracut: Skipping udev rule: 80-drivers-modprobe.rules dracut: *** Including module: dracut-systemd *** dracut: *** Including module: haveged *** dracut: *** Including module: ostree *** dracut: *** Including module: usrmount *** dracut: *** Including module: base *** dracut: *** Including module: fs-lib *** dracut: *** Including module: shutdown *** dracut: *** Including module: suse *** dracut: *** Including modules done *** dracut: *** Installing kernel module dependencies and firmware *** dracut: *** Installing kernel module dependencies and firmware done *** dracut: *** Resolving executable dependencies *** dracut: *** Resolving executable dependencies done*** dracut: *** Hardlinking files *** dracut: *** Hardlinking files done *** dracut: *** Stripping files *** dracut: *** Stripping files done *** dracut: *** Generating early-microcode cpio image *** dracut: *** Constructing AuthenticAMD.bin **** dracut: *** Store current command line parameters *** dracut: Stored kernel commandline: dracut: resume=UUID=97f30bf8-8f50-4787-9fe6-3290cb7048aa dracut: root=UUID=3a165b8b-3e3a-412d-bf54-d95ae6fc95bb rootfstype=ext4 rootflags=rw,relatime,data=ordered dracut: *** Creating image file '/boot/initrd-4.12.14-lp150.11-default' *** dracut: *** Creating initramfs image file '/boot/initrd-4.12.14-lp150.11-default' done *** (3/5) Installing: virtualbox-guest-tools-5.2.18-lp150.4.17.1.x86_64 .....................................................................................................................................................................................................[done] Additional rpm output: Failed to try-restart vboxadd.service: Unit vboxadd.service not found. Warning: vboxadd-service.service changed on disk. Run 'systemctl daemon-reload' to reload units. Warning: vboxadd-service.service changed on disk. Run 'systemctl daemon-reload' to reload units. (4/5) Removing kernel-default-4.12.14-lp150.11.4.x86_64 .................................................................................................................................................................................................................[done] (5/5) Installing: virtualbox-guest-x11-5.2.18-lp150.4.17.1.x86_64 .......................................................................................................................................................................................................[done] Executing %posttrans script 'virtualbox-guest-kmp-default-5.2.18_k4.12.14_lp150.12.16-lp150.4.17.1.x86_64.rpm' -------------------------------------------------------------------------------------------------------------------------------------------------------------[\] Output of virtualbox-guest-kmp-default-5.2.18_k4.12.14_lp150.12.16-lp150.4.17.1.x86_64.rpm %posttrans script: Creating initrd: /boot/initrd-4.12.14-lp150.2.g01eb812-default dracut: Executing: /usr/bin/dracut --logfile /var/log/YaST2/mkinitrd.log --force /boot/initrd-4.12.14-lp150.2.g01eb812-default 4.12.14-lp150.2.g01eb812-default dracut: *** Including module: bash *** dracut: *** Including module: systemd *** dracut: *** Including module: warpclock *** dracut: *** Including module: systemd-initrd *** dracut: *** Including module: i18n *** dracut: Could not find FONT_MAP none! dracut: *** Including module: drm *** dracut: *** Including module: plymouth *** dracut: *** Including module: kernel-modules *** dracut: Possible missing firmware "qed/qed_init_values_zipped-8.37.2.0.bin" for kernel module "qed.ko" dracut: Possible missing firmware "aic94xx-seq.fw" for kernel module "aic94xx.ko" dracut: Possible missing firmware "wd719x-risc.bin" for kernel module "wd719x.ko" dracut: Possible missing firmware "wd719x-wcs.bin" for kernel module "wd719x.ko" dracut: Possible missing firmware "sd8688.bin" for kernel module "libertas_sdio.ko" dracut: Possible missing firmware "sd8688_helper.bin" for kernel module "libertas_sdio.ko" dracut: Possible missing firmware "sd8686.bin" for kernel module "libertas_sdio.ko" dracut: Possible missing firmware "sd8686_helper.bin" for kernel module "libertas_sdio.ko" dracut: Possible missing firmware "sd8385.bin" for kernel module "libertas_sdio.ko" dracut: Possible missing firmware "sd8385_helper.bin" for kernel module "libertas_sdio.ko" dracut: *** Including module: resume *** dracut: *** Including module: rootfs-block *** dracut: *** Including module: terminfo *** dracut: *** Including module: udev-rules *** dracut: Skipping udev rule: 40-redhat.rules dracut: Skipping udev rule: 50-firmware.rules dracut: Skipping udev rule: 50-udev.rules dracut: Skipping udev rule: 91-permissions.rules dracut: Skipping udev rule: 80-drivers-modprobe.rules dracut: *** Including module: dracut-systemd *** dracut: *** Including module: haveged *** dracut: *** Including module: ostree *** dracut: *** Including module: usrmount *** dracut: *** Including module: base *** dracut: *** Including module: fs-lib *** dracut: *** Including module: shutdown *** dracut: *** Including module: suse *** dracut: *** Including modules done *** dracut: *** Installing kernel module dependencies and firmware *** dracut: *** Installing kernel module dependencies and firmware done *** dracut: *** Resolving executable dependencies *** dracut: *** Resolving executable dependencies done*** dracut: *** Hardlinking files *** dracut: *** Hardlinking files done *** dracut: *** Stripping files *** dracut: *** Stripping files done *** dracut: *** Generating early-microcode cpio image *** dracut: *** Constructing AuthenticAMD.bin **** dracut: *** Store current command line parameters *** dracut: Stored kernel commandline: dracut: resume=UUID=97f30bf8-8f50-4787-9fe6-3290cb7048aa dracut: root=UUID=3a165b8b-3e3a-412d-bf54-d95ae6fc95bb rootfstype=ext4 rootflags=rw,relatime,data=ordered dracut: *** Creating image file '/boot/initrd-4.12.14-lp150.2.g01eb812-default' *** dracut: *** Creating initramfs image file '/boot/initrd-4.12.14-lp150.2.g01eb812-default' done *** Executing %posttrans scripts ............................................................................................................................................................................................................................................[done] There are some running programs that might use files deleted by recent upgrade. You may wish to check and restart some of them. Run 'zypper ps -s' to list these programs. linux-4yai:~ # linux-4yai:~ # zypper up Loading repository data... Reading installed packages... The following package update will NOT be installed: kernel-default The following 12 NEW packages are going to be installed: libestr0 libfastjson4 liblogging0 liblognorm5 libzimg2 libzstd1 rsyslog syslog-service terminfo terminfo-iterm terminfo-screen xfsprogs The following 79 applications are going to be REMOVED: Activities "Activity Bar" "Activity Pager" "Analog Clock" "Application Dashboard" "Application Launcher" "Application Menu" "Application Menu Bar" "Battery and Brightness" "Binary Clock" Breeze "CPU Load Monitor" Calculator Calendar Clipboard "Color Picker" "Comic Strip" "Declarative Toolbox" "Default Panel" Desktop "Desktop Containment" "Device Notifier" Dictionary "Digital Clock" Discover "Disk Quota" Dolphin "Empty Panel" "Fifteen Puzzle" "Firefox Web Browser" "Folder View" "Fuzzy Clock" "Global Menu" "Grouping Plasmoid" Haenau "Hard Disk I/O Monitor" "Hard Disk Space Usage" Hunyango "Icons-only Task Manager" Image "Input Method Panel" "KDE Plasma Desktop" "Konsole Profiles" "LibreOffice Base" "LibreOffice Calc" "LibreOffice Draw" "LibreOffice Impress" "LibreOffice Writer" Lock/Logout "Media Player" "Media frame" "Memory Status" "Minimize all Windows" "Network Monitor" Networks Notes Notifications Okular Pager "Panel Toolbox" "Picture of the Day" "Plain Color" "Quick Share" Quicklaunch Search "Show Desktop" Slideshow "Software Updates" "System Load Viewer" "System Tray" "Task Manager" Timer Trashcan Updates "User Switcher" "Weather Forecast" "Web browser" "Window list" YaST The following 362 packages are going to be upgraded: ... yast2-proxy yast2-samba-server yast2-services-manager yast2-sound yast2-storage-ng yast2-sudo yast2-support yast2-sysconfig yast2-tune yast2-update yast2-users zypper zypper-aptitude zypper-log The following 10 patterns are going to be upgraded: apparmor apparmor_opt base enhanced_base enhanced_base_opt minimal_base sw_management x11 x11_enhanced x11_opt 362 packages to upgrade, 12 new. Overall download size: 505.6 MiB. Already cached: 0 B. After the operation, additional 8.4 MiB will be used. Continue? [y/n/...? shows all options] (y): Retrieving package terminfo-6.1-lp150.3.14.x86_64 ... (374/374) Installing: yast2-add-on-4.0.10-lp150.2.3.1.noarch ............................................................................................................................................................................................................[done] Executing %posttrans script 'ucode-intel-20180807a-lp150.2.10.1.x86_64.rpm' ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------[|] Output of ucode-intel-20180807a-lp150.2.10.1.x86_64.rpm %posttrans script: Creating initrd: /boot/initrd-4.12.14-lp150.2.g01eb812-default dracut: Executing: /usr/bin/dracut --logfile /var/log/YaST2/mkinitrd.log --force /boot/initrd-4.12.14-lp150.2.g01eb812-default 4.12.14-lp150.2.g01eb812-default dracut: *** Including module: bash *** dracut: *** Including module: systemd *** dracut: *** Including module: warpclock *** dracut: *** Including module: systemd-initrd *** dracut: *** Including module: i18n *** dracut: Could not find FONT_MAP none! dracut: *** Including module: drm *** dracut: *** Including module: plymouth *** dracut: *** Including module: kernel-modules *** dracut: Possible missing firmware "aic94xx-seq.fw" for kernel module "aic94xx.ko" dracut: Possible missing firmware "wd719x-risc.bin" for kernel module "wd719x.ko" dracut: Possible missing firmware "wd719x-wcs.bin" for kernel module "wd719x.ko" dracut: Possible missing firmware "sd8688.bin" for kernel module "libertas_sdio.ko" dracut: Possible missing firmware "sd8688_helper.bin" for kernel module "libertas_sdio.ko" dracut: Possible missing firmware "sd8686.bin" for kernel module "libertas_sdio.ko" dracut: Possible missing firmware "sd8686_helper.bin" for kernel module "libertas_sdio.ko" dracut: Possible missing firmware "sd8385.bin" for kernel module "libertas_sdio.ko" dracut: Possible missing firmware "sd8385_helper.bin" for kernel module "libertas_sdio.ko" dracut: *** Including module: resume *** dracut: *** Including module: rootfs-block *** dracut: *** Including module: suse-xfs *** dracut: *** Including module: terminfo *** dracut: *** Including module: udev-rules *** dracut: Skipping udev rule: 40-redhat.rules dracut: Skipping udev rule: 50-firmware.rules dracut: Skipping udev rule: 50-udev.rules dracut: Skipping udev rule: 91-permissions.rules dracut: Skipping udev rule: 80-drivers-modprobe.rules dracut: *** Including module: dracut-systemd *** dracut: *** Including module: haveged *** dracut: *** Including module: ostree *** dracut: *** Including module: usrmount *** dracut: *** Including module: base *** dracut: *** Including module: fs-lib *** dracut: *** Including module: shutdown *** dracut: *** Including module: suse *** dracut: *** Including modules done *** dracut: *** Installing kernel module dependencies and firmware *** dracut: *** Installing kernel module dependencies and firmware done *** dracut: *** Resolving executable dependencies *** dracut: *** Resolving executable dependencies done*** dracut: *** Hardlinking files *** dracut: *** Hardlinking files done *** dracut: *** Stripping files *** dracut: *** Stripping files done *** dracut: *** Generating early-microcode cpio image *** dracut: *** Constructing AuthenticAMD.bin **** dracut: *** Store current command line parameters *** dracut: Stored kernel commandline: dracut: resume=UUID=97f30bf8-8f50-4787-9fe6-3290cb7048aa dracut: root=UUID=3a165b8b-3e3a-412d-bf54-d95ae6fc95bb rootfstype=ext4 rootflags=rw,relatime,data=ordered dracut: *** Creating image file '/boot/initrd-4.12.14-lp150.2.g01eb812-default' *** dracut: *** Creating initramfs image file '/boot/initrd-4.12.14-lp150.2.g01eb812-default' done *** Executing %posttrans scripts ............................................................................................................................................................................................................................................[done] There are some running programs that might use files deleted by recent upgrade. You may wish to check and restart some of them. Run 'zypper ps -s' to list these programs. linux-4yai:~ # linux-4yai:~ # reboot Before install VBox_GAs I always for i in kernel-default kernel-devel gcc make ; do echo " " echo "# Installing ${i}... " zypper install ${i} done Checking for file conflicts: ............................................................................................................................................................................................................................................[done] ( 1/18) Installing: libasan4-7.3.1+r258812-lp150.2.10.x86_64 ............................................................................................................................................................................................................[done] ( 2/18) Installing: libatomic1-7.3.1+r258812-lp150.2.10.x86_64 ..........................................................................................................................................................................................................[done] ( 3/18) Installing: libcilkrts5-7.3.1+r258812-lp150.2.10.x86_64 .........................................................................................................................................................................................................[done] ( 4/18) Installing: libitm1-7.3.1+r258812-lp150.2.10.x86_64 .............................................................................................................................................................................................................[done] ( 5/18) Installing: liblsan0-7.3.1+r258812-lp150.2.10.x86_64 ............................................................................................................................................................................................................[done] ( 6/18) Installing: libmpx2-7.3.1+r258812-lp150.2.10.x86_64 .............................................................................................................................................................................................................[done] ( 7/18) Installing: libmpxwrappers2-7.3.1+r258812-lp150.2.10.x86_64 .....................................................................................................................................................................................................[done] ( 8/18) Installing: libtsan0-7.3.1+r258812-lp150.2.10.x86_64 ............................................................................................................................................................................................................[done] ( 9/18) Installing: libubsan0-7.3.1+r258812-lp150.2.10.x86_64 ...........................................................................................................................................................................................................[done] (10/18) Installing: linux-glibc-devel-4.15-lp150.1.23.noarch ............................................................................................................................................................................................................[done] (11/18) Installing: kernel-macros-4.12.14-lp150.2.1.g01eb812.noarch .....................................................................................................................................................................................................[done] (12/18) Installing: kernel-devel-4.12.14-lp150.2.1.g01eb812.noarch ......................................................................................................................................................................................................[done] (13/18) Installing: glibc-devel-2.26-lp150.11.6.120.x86_64 ..............................................................................................................................................................................................................[done] (14/18) Installing: zlib-devel-1.2.11-lp150.2.3.1.x86_64 ................................................................................................................................................................................................................[done] (15/18) Installing: gcc7-7.3.1+r258812-lp150.2.10.x86_64 ................................................................................................................................................................................................................[done] (16/18) Installing: libelf-devel-0.168-lp150.2.48.x86_64 ................................................................................................................................................................................................................[done] (17/18) Installing: gcc-7-lp150.1.50.x86_64 .............................................................................................................................................................................................................................[done] (18/18) Installing: kernel-default-devel-4.12.14-lp150.2.1.g01eb812.x86_64 ..............................................................................................................................................................................................[done] # Installing gcc... Loading repository data... Reading installed packages... 'gcc' is already installed. No update candidate for 'gcc-7-lp150.1.50.x86_64'. The highest available version Setup Shared Folders afterwards Every works ok I reboot again - and everyting works including the Shared Folders -- You are receiving this mail because: You are on the CC list for the bug.

http://bugzilla.opensuse.org/show_bug.cgi?id=1111076 http://bugzilla.opensuse.org/show_bug.cgi?id=1111076#c54 Wolfgang Bauer changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |l_pat_s@hotmail.com --- Comment #54 from Wolfgang Bauer --- *** Bug 1111279 has been marked as a duplicate of this bug. *** -- You are receiving this mail because: You are on the CC list for the bug.