https://bugzilla.novell.com/show_bug.cgi?id=442323 Summary: OpenSuse 11.1 Beta 4 *** FAILS *** to install on D975XBX2 mainboard (with MArvell 88SE6145 SATA2 Controller) Product: openSUSE 11.1 Version: Beta4 Platform: x86-64 OS/Version: All Status: NEW Severity: Blocker Priority: P5 - None Component: Kernel AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: taresus@yahoo.com QAContact: qa@suse.de Found By: Other scsi4 : pata_marvell scsi5 : pata_marvell ata5: PATA max UDMA/100 cmd 0x00012018 ctl 0x00012026 bmdma 0x00012000 irq 16 ata6: PATA max UDMA/133 cmd 0x00012010 ctl 0x00012022 bmdma 0x00012008 irq 16 BAR5:00:04 01:7F 02:22 03:C8 04:02 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:1F 0D:00 0E:00 0F:00 ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1b.0 to 64 BAR5:00:04 01:7F 02:22 03:C8 04:02 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:1F 0D:00 0E:00 0F:00 firewire_core: created new fw device fw0 (0 config rom retries, S400) ata6.00: qc timeout (cmd 0xec) ata6.00: failed to IDENTIFY (I/O error, err_mask=0x4) BAR5:00:04 01:7F 02:22 03:C8 04:02 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:1F 0D:00 0E:00 0F:00 ata6: port is slow to respond, please be patient (Status 0xd0) ata6: device not ready (errno=-16), forcing hardreset ata6: port is slow to respond, please be patient (Status 0xd0) ata6: SRST failed (errno=-16) ata6: port is slow to respond, please be patient (Status 0xd0) ata6: SRST failed (errno=-16) ata6: port is slow to respond, please be patient (Status 0xd0) ata6: SRST failed (errno=-16) ata6: SRST failed (errno=-16) ata6: reset failed, giving up ata6: EH pending after completion, repeating EH (cnt=4) BAR5:00:04 01:7F 02:22 03:C8 04:02 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:1F 0D:00 0E:00 0F:00 ata6: port is slow to respond, please be patient (Status 0xd0) ata6: device not ready (errno=-16), forcing hardreset ata6: soft resetting port ata6: port is slow to respond, please be patient (Status 0xd0) ata6: SRST failed (errno=-16) ata6: soft resetting port ata6: port is slow to respond, please be patient (Status 0xd0) ata6: SRST failed (errno=-16) ata6: soft resetting port ata6: port is slow to respond, please be patient (Status 0xd0) ata6: SRST failed (errno=-16) ata6: soft resetting port ata6: SRST failed (errno=-16) ata6: reset failed, giving up ata6: EH complete -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.