https://bugzilla.novell.com/show_bug.cgi?id=171517 trenn@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |ak@novell.com Summary|APIC problems on Asus M2N- |APIC problems on Asus M2N-SLI Deluxe (chipset |SLI Deluxe (chipset nForce |nForce 570; socket AM2) needs noapic to boot |570; socket AM2) machine | |hangs at early boot time | ------- Comment #16 from trenn@novell.com 2006-10-30 06:39 MST ------- I just want to summarize the problem for Andi again: This happens with a 10.2 installation without modifing any params (with a 2.6.18-rc5 or earlier kernel): comment #1: ENABLING IO-APIC IRQS TIMER: vector 0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 MP-BIOS bug: 8254 timer not connected to IO-APIC ..trying to set timer (IRQ0) through the 8259A ...failed ..trying to set timer as Virtual Wire IRQ ...failed ..trying to set timer as ExtINT IRQ faild :( Kernel panic - not syncing. IO-APIC timer doesn't work! Boot with apic=debug and send a report. Then try booting with 'noapic' option The apic problem is workarounded by passing noapic option, but sound card has interrupt problems then. AFAIK the board is quite new and apic should work, then probably the sound problem is also solved. Andi: Do you know about above message: 8254 timer not connected to IO-APIC Maybe Mark should try the latest 10.2 Beta1 which should be out now. IMO it's likely that this got fixed? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.