[Bug 231163] New: OpenSUSE 10.2 boot hangs
https://bugzilla.novell.com/show_bug.cgi?id=231163 Summary: OpenSUSE 10.2 boot hangs Product: openSUSE 10.2 Version: Final Platform: x86-64 OS/Version: SuSE Other Status: NEW Severity: Critical Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: lorantruckert@yahoo.com QAContact: jsrain@novell.com I have a PackardBell SW51 notebook (AMD Turion 64 dual-core, 1GB RAM, nForce 430 chipset, nVIDIA GO 6100 VGA controller). When I start the default install (OpenSUSE 10.2 x86_64 DVD) the boot process freezes right after displaying the following line: IO scheduler cfg registered (default) If I start the failsafe install, or use the acpi=off or noapic kernel parameters, everthing is fine, but I have only 1 CPU and acpi turned off. I tried to disable USB support in the BIOS. When I started the default installer, the boot process hanged at this line: Starting udev... But this time I had at least the chance to reboot with CTRL-ALT-DELETE. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=231163 chrubis@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|bnc-team- |kernel-maintainers@forge.provo.novell.com |screening@forge.provo.novell| |.com | -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=231163 lmb@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |lorantruckert@yahoo.com ------- Comment #1 from lmb@novell.com 2007-01-05 09:10 MST ------- What does the firmware diagnosis tool report, which is available from the mini-iso boot menu? Alternatively, you can grab the toolkit from http://www.linuxfirmwarekit.org/ -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=231163 ------- Comment #2 from lorantruckert@yahoo.com 2007-01-06 12:10 MST ------- Here is the result of the firmware test. To start it, I have to use one of the acpi=off, acpi=noirq, or noapic kernel parameters, as in the case of the default installer to make my box running. The test has run with noapic kernel parameter. During the test, a line has appeared: plugins/thermal_trip.sh line 154: [: : integer expression expected I put only items marked FAIL and INFO: items marked FAIL: DMI information check out of spec value found EDD boot disk hinting boot device 0x80 does not support EDD ACPI passive thermal trip points changing passive trip points seems uneffective in Zone TZ0 General ACPI information DSDT was compiled by the Intel AML compiler PCI express port driver reports an invalid IRQ PCI express port driver reports an invalid IRQ MFCG PCI express* memory mapped config space E820: MCFG mmio config space at 0xe0000000 is not reserved in HPET configuration test failed to locate HPET base items marked INFO: Processor mircocode update kernel too old; the kernel does not export microcode version kernel too old; the kernel does not export microcode version CPU frequency steps supported 2 CPU frequency steps supported -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=231163 lmb@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|kernel- |trenn@novell.com |maintainers@forge.provo.nove| |ll.com | Status|NEEDINFO |NEW Info Provider|lorantruckert@yahoo.com | -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=231163 trenn@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution| |DUPLICATE ------- Comment #3 from trenn@novell.com 2007-01-11 06:31 MST ------- Nvida chipset, x86_64 with apic problems -> expect duplicate. *** This bug has been marked as a duplicate of bug 232013 *** -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=231163 ------- Comment #4 from trenn@novell.com 2007-01-18 08:45 MST ------- Oh wait, maybe you have wrong dmi info in BIOS. Can you attach dmidecode output pls, if this is the case you should be able to boot with acpi=force apic=force? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=231163 ------- Comment #5 from lorantruckert@yahoo.com 2007-01-18 14:06 MST ------- Created an attachment (id=113755) --> (https://bugzilla.novell.com/attachment.cgi?id=113755&action=view) Output of dmidecode -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=231163 ------- Comment #6 from lorantruckert@yahoo.com 2007-01-18 14:09 MST ------- (In reply to comment #4)
Oh wait, maybe you have wrong dmi info in BIOS. Can you attach dmidecode output pls, if this is the case you should be able to boot with acpi=force apic=force?
I've tried the kernel parameters above, but the same has happened. The boot process stopped right after listing of the IO schedulers. Now I'm using the 2.6.20 rc5 kernel, downloaded from the opensuse ftp. Everything is fine, my CPUs, sound card and graphical boot is working. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
participants (1)
-
bugzilla_noreply＠novell.com