[Bug 441926] New: wodim fails to blank CDRW
https://bugzilla.novell.com/show_bug.cgi?id=441926 Summary: wodim fails to blank CDRW Product: openSUSE 11.1 Version: Beta4 Platform: 32bit OS/Version: SuSE Other Status: NEW Severity: Critical Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: kssingvo@novell.com QAContact: qa@suse.de Found By: Development Created an attachment (id=250080) --> (https://bugzilla.novell.com/attachment.cgi?id=250080) /var/log/messages $summary says all. :-) wodim hangs "forever" in blanking mode. ----------- snip ----------- snip ------------- snip -------- snip ----------- wodim dev=/dev/cdrw blank=fast gracetime=2 --eject Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'PLEXTOR ' Identification : 'CD-R PX-W4012A' Revision : '1.05' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE VARIREC FORCESPEED SINGLESESSION HIDECDR Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Speed set to 706 KB/s Starting to write CD/DVD at speed 4.0 in real BLANK mode for single session. Last chance to quit, starting real write in 0 seconds. Operation starts. ----------- snip ----------- snip ------------- snip -------- snip ----------- /var/log/messages attached (reduced) It's a IDE device, and the media + CDRW worked flawless with openSUSE 11.0 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=441926 Klaus Singvogel <kssingvo@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|bnc-team-screening@forge.provo.novell.com |nadvornik@novell.com -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=441926 User kssingvo@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=441926#c1 --- Comment #1 from Klaus Singvogel <kssingvo@novell.com> 2008-11-05 10:47:04 MST --- Further information: - wodim fails on MultiSpeed media (4x), but not with 10x speed media on openSUSE 11.1 Beta4 - I tested it without starting an graphical desktop, and as root: wodim fails again on Multispeed, but not 10x speed CD-RW. - I booted openSUSE 11.0 and wodim could successfully (!) blank this media on the same CD-RW device (on the same machine). - I see that the blanking is running on openSUSE-11.1, because the LED of device blinks yellow. But as soon as the LED switches to a permanent green color (= blanking is finished) the process hangs. On openSUSE-11.0 the LED switches to green either and then the prompt returns (= media could be ejected then). So, it's not the desktop nor the hardware; either wodim or the kernel, I think. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=441926 User nadvornik@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=441926#c2 --- Comment #2 from Vladimir Nadvornik <nadvornik@novell.com> 2008-11-07 05:09:19 MST --- There was no change in wodim code between 11.0 and 11.1, AFAIK. Can you please try "wodim -V ..."? That should print the SCSI command that fails. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=441926 User kssingvo@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=441926#c3 --- Comment #3 from Klaus Singvogel <kssingvo@novell.com> 2008-11-10 07:25:04 MST --- I tried it out on a different burning device (on test machine instead of workstation), but even a openSUSE 11.1 beta4 installation, and blanking fails again. It's LG GSA-H42N, a DVD burner, instead of a CD-RW burner. Here are the last lines output of "wodim -V ...": ----------- snip ----------- snip ------------- snip -------- snip ----------- Executing 'test unit ready' command on Bus 4 Target 0, Lun 0 timeout 40s CDB: 00 00 00 00 00 00 cmd finished after 0.001s timeout 40s Executing 'mode sense g1' command on Bus 4 Target 0, Lun 0 timeout 40s CDB: 5A 00 2A 00 00 00 00 00 60 00 cmd finished after 0.002s timeout 40s Mode Sense Data 00 5E 21 00 00 00 00 00 2A 56 3F 37 F1 73 2B 23 1B 90 01 00 08 00 1B 90 00 00 02 C2 02 C2 00 01 00 00 00 00 02 C2 00 01 00 00 02 C2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Mode Sense Data (converted) 5B 21 00 00 2A 56 3F 37 F1 73 2B 23 1B 90 01 00 08 00 1B 90 00 00 02 C2 02 C2 00 01 00 00 00 00 02 C2 00 01 00 00 02 C2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Mode Sense Data 5B 21 00 00 2A 56 3F 37 F1 73 2B 23 1B 90 01 00 08 00 1B 90 00 00 02 C2 02 C2 00 01 00 00 00 00 02 C2 00 01 00 00 02 C2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Executing 'blank unit' command on Bus 4 Target 0, Lun 0 timeout 9600s CDB: A1 01 00 00 00 00 00 00 00 00 00 00 ----------- snip ----------- snip ------------- snip -------- snip ----------- -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=441926 User nadvornik@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=441926#c4 Vladimir Nadvornik <nadvornik@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |nadvornik@novell.com AssignedTo|nadvornik@novell.com |kernel-maintainers@forge.provo.novell.com --- Comment #4 from Vladimir Nadvornik <nadvornik@novell.com> 2008-11-11 02:50:16 MST --- It happens also with 11.0 wodim installed on 11.1 so it must be a kernel bug. It first shows the wodim process in D and after some time the machine freezes completely. I got the same messages as in the initial comment. The only difference between blanking 4x and 10x media is the speed so I guess that the problem is caused by some timeout (wodim itself requests timeout that is big enough). -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=441926 User kssingvo@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=441926#c5 --- Comment #5 from Klaus Singvogel <kssingvo@novell.com> 2008-11-11 02:56:22 MST --- Sorry, but I cannot confirm this (see my previous comments too). I had never problems with 11.0 wodim when blanking 4x media; and I did this several times. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=441926 User nadvornik@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=441926#c6 --- Comment #6 from Vladimir Nadvornik <nadvornik@novell.com> 2008-11-11 03:06:13 MST ---
I had never problems with 11.0 wodim when blanking 4x media; and I did this several times.
With 11.0 wodim together with 11.1 kernel? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=441926 User kssingvo@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=441926#c7 Klaus Singvogel <kssingvo@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |kssingvo@novell.com --- Comment #7 from Klaus Singvogel <kssingvo@novell.com> 2008-11-11 06:25:38 MST --- Sorry, I misunderstood you. I thought wodim 11.0 with kernel 11.0. Yes, you're right: wodim 11.0 with kernel 11.1 hangs. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=441926 User nadvornik@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=441926#c8 --- Comment #8 from Vladimir Nadvornik <nadvornik@novell.com> 2008-11-14 07:23:55 MST --- It seems to be fixed on beta5. Please confirm. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=441926 Jeff Mahoney <jeffm@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |jeffm@novell.com Status|NEW |NEEDINFO Info Provider| |kssingvo@novell.com -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=441926 User kssingvo@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=441926#c9 Klaus Singvogel <kssingvo@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|kssingvo@novell.com | --- Comment #9 from Klaus Singvogel <kssingvo@novell.com> 2008-11-26 03:13:18 MST --- confirm -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=441926 User coolo@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=441926#c10 Stephan Kulow <coolo@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution| |FIXED --- Comment #10 from Stephan Kulow <coolo@novell.com> 2008-11-27 07:24:13 MST --- . -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=441926 User martin.konopka@stuba.sk added comment https://bugzilla.novell.com/show_bug.cgi?id=441926#c11 Martin Konopka <martin.konopka@stuba.sk> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |martin.konopka@stuba.sk --- Comment #11 from Martin Konopka <martin.konopka@stuba.sk> 2008-11-28 11:48:05 MST --- I can just confirm this problem also for DVD-RW media, trying it with openSUSE 11.1 Beta5 (x86)m KDE4 environment, on my notebook Fujitsu-Siemens AMILO Pro V3205 (a 32-bit PC). I can not look on more hardware details of the machine at the moment because I am installing RC1 right now. I tried to reuse my rewritable media to burn openSUSE 11.1 RC1 iso files. Erasing the media (both the DVD-RW and CD-RW, the latter one used for language AddOn) failed. Both in K3b and Brasero. Both fast blanking and non-fast. I then tossed my DVD-RW into waste basket, thinking it was somehow damaged. I intended to do so also with the CD-RW but then I got an idea to reboot to the ubuntu 8.10 partition (on the same machine). In the ubuntu erasing of the CD-RW with brasero worked absolutely smoothly and I could reuse it then. (Unfortunately my DVD-RW has already laid (dirty) in the basket but I would bet that in ubuntu it would be possible to successfully erase it.) I just add that I did the successful blanking in ubuntu with verifying (non-fast, as I usually do). So, erasing with openSUSE 11.1 beta5 appears not to be working et all. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=441926 User nadvornik@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=441926#c12 --- Comment #12 from Vladimir Nadvornik <nadvornik@novell.com> 2008-12-01 02:55:07 MST --- This seems to be a different bug. The original bug freezed the machine completely. Please enter a new bugreport and attach k3b log. A log from a successful session in Ubuntu would be also useful. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
https://bugzilla.novell.com/show_bug.cgi?id=441926 User martin.konopka@stuba.sk added comment https://bugzilla.novell.com/show_bug.cgi?id=441926#c13 --- Comment #13 from Martin Konopka <martin.konopka@stuba.sk> 2008-12-01 08:26:28 MST --- OK, I will report it (as a new bug) if I find this issue also in a next openSUSE release (either development or final). I do not have beta 5 any more and I can not test it in RC1 because this latter one did not install succesfully on my notebook (did corrupt my boot loader - see bug # 450091 ). However now I just add that the bug in erasing in my case displayed itself in such a way that the process of medium erasing (both CD and DVD) had started but did not finish at all, both with Brasero and K3b. I was each time waiting for .. say 15-30 minutes and it still was in a state of "erasing" but did not the job actually. The same CD medium was erased in ubuntu on the same machine in few minutes. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.
participants (1)
-
bugzilla_noreply＠novell.com