[Bug 220309] New: No support for Logitech Messanger?
https://bugzilla.novell.com/show_bug.cgi?id=220309 Summary: No support for Logitech Messanger? Product: openSUSE 10.2 Version: Beta 2 Platform: Other OS/Version: Other Status: NEW Severity: Enhancement Priority: P5 - None Component: Other AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: Joachim.Reichelt@helmholtz-hzi.de QAContact: qa@suse.de I have a logitech webcam. I tried in beta1 both kernel drivers "messenger" and "messenger_:::" In beta2 the driver "messenger.ko" is no longer there. So I tried a self compiled version from http://home.mag.cx/messenger. The camera is recognized by the messenger.ko only (beta1 + beta2) xawtv -c /dev/video0 -nodga did not work. kopete same. But kopete setup filles my /var/log/messages up: ov 12 23:04:42 joachims kernel: quickcam: unable start isoc Nov 12 23:04:42 joachims kernel: quickcam [42.004988]: failed qc_capt_get()=-28 Nov 12 23:04:42 joachims kernel: quickcam [42.004991]: failed qc_v4l_ioctl()=-28 Nov 12 23:04:59 joachims kernel: quickcam [59.952789]: close users=0 Nov 12 23:05:15 joachims kernel: quickcam [15.529014]: open users=1 Nov 12 23:05:15 joachims kernel: quickcam [15.534355]: qc_sensor_init: call qc_sensor_setsize0 (324,248) Nov 12 23:05:15 joachims kernel: quickcam [15.534985]: set sensor=324x248 vwin=324x248 Nov 12 23:05:15 joachims kernel: quickcam [15.536995]: failed qc_v4l_ioctl()=-515 Nov 12 23:05:15 joachims kernel: quickcam [15.537300]: close users=0 Nov 12 23:05:15 joachims kernel: quickcam [15.537730]: open users=1 Nov 12 23:05:15 joachims kernel: quickcam [15.544848]: qc_sensor_init: call qc_sensor_setsize0 (324,248) Nov 12 23:05:15 joachims kernel: quickcam [15.545353]: set sensor=324x248 vwin=324x248 Nov 12 23:05:15 joachims kernel: quickcam [15.547236]: failed qc_v4l_ioctl()=-515 Nov 12 23:05:15 joachims kernel: quickcam [15.548563]: close users=0 Nov 12 23:05:15 joachims kernel: quickcam [15.548945]: open users=1 Nov 12 23:05:15 joachims kernel: quickcam [15.553971]: qc_sensor_init: call qc_sensor_setsize0 (324,248) Nov 12 23:05:15 joachims kernel: quickcam [15.554474]: set sensor=324x248 vwin=324x248 Nov 12 23:05:15 joachims kernel: quickcam [15.556124]: failed qc_v4l_ioctl()=-515 Nov 12 23:05:16 joachims kernel: quickcam [16.133098]: set sensor=162x124 vwin=160x120 Nov 12 23:05:16 joachims kernel: quickcam [16.133548]: submit ISOC_URB 0 failed Nov 12 23:05:16 joachims kernel: quickcam [16.133555]: failed qc_isoc_init()=-28 Nov 12 23:05:16 joachims kernel: quickcam: unable start isoc Nov 12 23:05:16 joachims kernel: quickcam [16.133561]: failed qc_capt_get()=-28 Nov 12 23:05:16 joachims kernel: quickcam [16.133564]: failed qc_v4l_ioctl()=-28 Nov 12 23:05:16 joachims kernel: quickcam [16.134742]: unsupported image format 15 Nov 12 23:05:16 joachims kernel: quickcam [16.134751]: failed qc_v4l_ioctl()=-22 Nov 12 23:05:16 joachims kernel: quickcam [16.135827]: unsupported image format 9 Nov 12 23:05:16 joachims kernel: quickcam [16.135835]: failed qc_v4l_ioctl()=-22 Nov 12 23:05:16 joachims kernel: quickcam [16.136788]: submit ISOC_URB 0 failed Nov 12 23:05:16 joachims kernel: quickcam [16.136796]: failed qc_isoc_init()=-28 Nov 12 23:05:16 joachims kernel: quickcam: unable start isoc Nov 12 23:05:16 joachims kernel: quickcam [16.136801]: failed qc_capt_get()=-28 Nov 12 23:05:16 joachims kernel: quickcam [16.136804]: failed qc_v4l_ioctl()=-28 Nov 12 23:05:16 joachims kernel: quickcam [16.137388]: submit ISOC_URB 0 failed Nov 12 23:05:16 joachims kernel: quickcam [16.137394]: failed qc_isoc_init()=-28 Nov 12 23:05:16 joachims kernel: quickcam: unable start isoc Nov 12 23:05:16 joachims kernel: quickcam [16.137400]: failed qc_capt_get()=-28 Nov 12 23:05:16 joachims kernel: quickcam [16.137403]: failed qc_v4l_ioctl()=-28 === HW: P IV, 2GHz, no HT. 112: udi = '/org/freedesktop/Hal/devices/usb_device_46d_8f6_noserial_if2' usb.version_bcd = 512 (0x200) usb.is_self_powered = false usb.linux.device_number = 5 (0x5) usb.product = 'USB Audio Interface' usb.device_protocol = 255 (0xff) linux.subsystem = 'usb' usb.device_revision_bcd = 256 (0x100) info.product = 'USB Audio Interface' usb.bus_number = 1 (0x1) usb.interface.class = 1 (0x1) usb.configuration_value = 1 (0x1) info.linux.driver = 'snd-usb-audio' usb.num_interfaces = 3 (0x3) info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_8f6_noserial' usb.interface.subclass = 2 (0x2) usb.num_configurations = 1 (0x1) usb.device_subclass = 255 (0xff) usb.vendor_id = 1133 (0x46d) usb.vendor = 'Logitech, Inc.' usb.device_class = 255 (0xff) usb.can_wake_up = true usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.4/1-5.4:1.2' usb.num_ports = 0 (0x0) usb.speed_bcd = 4608 (0x1200) usb.max_power = 100 (0x64) info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_8f6_noserial_if2' info.bus = 'usb' linux.hotplug_type = 2 (0x2) usb.interface.number = 2 (0x2) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.4/1-5.4:1.2' usb.product_id = 2294 (0x8f6) usb.interface.protocol = 0 (0x0) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.4/1-5.4:1.2' -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=220309 mhorvath@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|bnc-team- |kernel-maintainers@forge.provo.novell.com |screening@forge.provo.novell| |.com | Severity|Enhancement |Critical -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=220309 gregkh@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|kernel- |gregkh@novell.com |maintainers@forge.provo.nove| |ll.com | Status|NEW |ASSIGNED ------- Comment #1 from gregkh@novell.com 2006-11-15 10:26 MST ------- The driver should still be there in beta2, why do you think it is gone? Can you provide the kernel log messages from when you plug in your device, without any driver that you built on your own. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=220309 gregkh@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |NEEDINFO Info Provider| |Joachim.Reichelt@helmholtz-hzi.de -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=220309 Joachim.Reichelt@helmholtz-hzi.de changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |ASSIGNED ------- Comment #2 from Joachim.Reichelt@helmholtz-hzi.de 2006-11-16 11:51 MST ------- Created an attachment (id=105827) --> (https://bugzilla.novell.com/attachment.cgi?id=105827&action=view) /var/log/messages as suggested I restarted syslog, then pluged in the messenger. dmesg gives: usb 1-5.4: new full speed USB device using ehci_hcd and address 8 usb 1-5.4: new device found, idVendor=046d, idProduct=08f6 usb 1-5.4: new device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-5.4: Product: Camera usb 1-5.4: configuration #1 chosen from 1 choice -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=220309 ------- Comment #3 from Joachim.Reichelt@helmholtz-hzi.de 2006-11-16 11:55 MST ------- Created an attachment (id=105831) --> (https://bugzilla.novell.com/attachment.cgi?id=105831&action=view) /var/log/messages same as before, but started with modprobe quickcam_messenger -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=220309 gregkh@novell.com changed: What |Removed |Added ---------------------------------------------------------------------------- Status|ASSIGNED |RESOLVED Resolution| |WONTFIX ------- Comment #4 from gregkh@novell.com 2006-11-16 13:42 MST ------- Sorry, but your device is not supported by the quickcam_messenger driver at this point in time. I suggest working with the upstream developers if you wish to have support for this device in Linux, there's not much we can do here about it at this time. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
https://bugzilla.novell.com/show_bug.cgi?id=220309 ------- Comment #5 from Joachim.Reichelt@helmholtz-hzi.de 2006-11-17 00:28 MST ------- O.K. I looked at the kernel sources and found, that this quickcam is really different to the supported one. So again there are devices on the market, that looks the same, have the same name and are really different inside. And logitech is of no help. I remember to have the cam working in the suse 9.x series. But this was no fun too. So leave this bug closed. Thanks -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.
participants (1)
-
bugzilla_noreply@novell.com