https://bugzilla.novell.com/show_bug.cgi?id=445433 User sajan.johnson@saudia.com added comment https://bugzilla.novell.com/show_bug.cgi?id=445433#c1 --- Comment #1 from sajan johnson <sajan.johnson@saudia.com> 2008-11-18 06:58:51 MST --- I am attaching startup log. Inspecting /boot/System.map-2.6.27.5-2-default Cannot find map file. No module symbols loaded - kernel modules not enabled. Cannot build symbol table - disabling symbol lookups klogd 1.4.1, log source = ksyslog started. <6>Initializing cgroup subsys cpuset <6>Initializing cgroup subsys cpu <5>Linux version 2.6.27.5-2-default (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-11-11 15:15:33 +0100 <6>Command line: root=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part7 resume=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part5 splash=silent vga=0x317 <4>KERNEL supported cpus: <4> Intel GenuineIntel <4> AMD AuthenticAMD <4> Centaur CentaurHauls <6>BIOS-provided physical RAM map: <6> BIOS-e820: 0000000000000000 - 000000000009e000 (usable) <6> BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) <6> BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) <6> BIOS-e820: 0000000000100000 - 000000003bf50000 (usable) <6> BIOS-e820: 000000003bf50000 - 000000003bf65000 (ACPI data) <6> BIOS-e820: 000000003bf65000 - 000000003bf66000 (ACPI NVS) <6> BIOS-e820: 000000003bf66000 - 0000000040000000 (reserved) <6> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) <6> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) <6> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) <6> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) <6>last_pfn = 0x3bf50 max_arch_pfn = 0x3ffffffff <6>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 <6>init_memory_mapping <7> 0000000000 - 003be00000 page 2M <7> 003be00000 - 003bf50000 page 4k <7>kernel direct mapping tables up to 3bf50000 @ 8000-b000 <6>last_map_addr: 3bf50000 end: 3bf50000 <6>RAMDISK: 379e3000 - 37fef89e <6>DMI present. <4>ACPI: RSDP 000F8250, 0024 (r2 PTLTD ) <4>ACPI: XSDT 3BF5C0CE, 006C (r1 HPQOEM SLIC-MPC 6040000 LTP 0) <4>ACPI: FACP 3BF649BA, 00F4 (r3 NVIDIA MCP67-M 6040000 PTL_ F4240) <4>ACPI: DSDT 3BF5C13A, 880C (r1 NVIDIA MCP67 6040000 MSFT 3000000) <4>ACPI: FACS 3BF65FC0, 0040 <4>ACPI: TCPA 3BF64AAE, 0032 (r1 Phoeni x 6040000 TL 0) <4>ACPI: SRAT 3BF64AE0, 00A0 (r1 AMD HAMMER 6040000 AMD 1) <4>ACPI: SSDT 3BF64B80, 0206 (r1 PTLTD POWERNOW 6040000 LTP 1) <4>ACPI: MCFG 3BF64D86, 003C (r1 PTLTD MCFG 6040000 LTP 0) <4>ACPI: HPET 3BF64DC2, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) <4>ACPI: APIC 3BF64DFA, 0068 (r1 PTLTD APIC 6040000 LTP 0) <4>ACPI: BOOT 3BF64E62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) <4>ACPI: SLIC 3BF64E8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1) <5>ACPI: DMI detected: Hewlett-Packard <6>SRAT: PXM 0 -> APIC 0 -> Node 0 <6>SRAT: PXM 0 -> APIC 1 -> Node 0 <6>SRAT: Node 0 PXM 0 0-a0000 <6>SRAT: Node 0 PXM 0 100000-40000000 <7>NUMA: Allocated memnodemap from 9000 - 9880 <7>NUMA: Using 20 for the hash shift. <6>Bootmem setup node 0 0000000000000000-000000003bf50000 <6> NODE_DATA [0000000000009880 - 000000000001e87f] <6> bootmap [000000000001f000 - 00000000000267ef] pages 8 <6>(7 early reservations) ==> bootmem [0000000000 - 003bf50000] <6> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] <6> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] <6> #2 [0000200000 - 0000b62f78] TEXT DATA BSS ==> [0000200000 - 0000b62f78] <6> #3 [00379e3000 - 0037fef89e] RAMDISK ==> [00379e3000 - 0037fef89e] <6> #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000] <6> #5 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] <6> #6 [0000009000 - 0000009880] MEMNODEMAP ==> [0000009000 - 0000009880] <6>found SMP MP-table at [ffff8800000f8220] 000f8220 <7> [ffffe20000000000-ffffe20000ffffff] PMD -> [ffff880001200000-ffff8800021fffff] on node 0 <4>Zone PFN ranges: <4> DMA 0x00000000 -> 0x00001000 <4> DMA32 0x00001000 -> 0x00100000 <4> Normal 0x00100000 -> 0x00100000 <4>Movable zone start PFN for each node <4>early_node_map[2] active PFN ranges <4> 0: 0x00000000 -> 0x0000009e <4> 0: 0x00000100 -> 0x0003bf50 <7>On node 0 totalpages: 245486 <7> DMA zone: 1428 pages, LIFO batch:0 <7> DMA32 zone: 237714 pages, LIFO batch:31 <6>Detected use of extended apic ids on hypertransport bus <6>ACPI: PM-Timer IO Port: 0x1008 <7>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) <6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) <6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) <6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) <6>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <7>ACPI: IRQ0 used by override. <7>ACPI: IRQ2 used by override. <7>ACPI: IRQ9 used by override. <6>ACPI: HPET id: 0x10de8201 base: 0xfed00000 <6>Using ACPI (MADT) for SMP configuration information <6>SMP: Allowing 2 CPUs, 0 hotplug CPUs <6>PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 <6>PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 <6>PM: Registered nosave memory: 00000000000d2000 - 0000000000100000 <6>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) <6>PERCPU: Allocating 62240 bytes of per cpu data <7>NR_CPUS: 128, nr_cpu_ids: 2, nr_node_ids 1 <4>Built 1 zonelists in Node order, mobility grouping on. Total pages: 239142 <4>Policy zone: DMA32 <5>Kernel command line: root=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part7 resume=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part5 splash=silent vga=0x317 <6>bootsplash: silent mode. <6>Initializing CPU#0 <4>PID hash table entries: 4096 (order: 12, 32768 bytes) <6>Extended CMOS year: 2000 <6>TSC: PIT calibration confirmed by PMTIMER. <6>TSC: using PIT calibration value <4>Detected 1900.121 MHz processor. <7>spurious 8259A interrupt: IRQ7. <4>Console: colour dummy device 80x25 <6>console [tty0] enabled <6>Checking aperture... <6>No AGP bridge found <6>Node 0: aperture @ 480000000 size 32 MB <3>Aperture beyond 4GB. Ignoring. <6>Memory: 949416k/982336k available (2756k kernel code, 32528k reserved, 2631k data, 1464k init) <7>CPA: page pool initialized 1 of 1 pages preallocated <7>hpet clockevent registered <6>Calibrating delay loop (skipped), value calculated using timer frequency.. 3800.24 BogoMIPS (lpj=7600484) <4>kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved <6>Security Framework initialized <6>SELinux: Disabled at boot. <6>AppArmor: AppArmor initialized <6>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) <6>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) <4>Mount-cache hash table entries: 256 <6>Initializing cgroup subsys ns <6>Initializing cgroup subsys cpuacct <6>Initializing cgroup subsys memory <6>Initializing cgroup subsys devices <6>Initializing cgroup subsys freezer <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) <6>CPU: L2 Cache: 512K (64 bytes/line) <6>CPU 0/0 -> Node 0 <7>tseg: 003bf80000 <6>CPU: Physical Processor ID: 0 <6>CPU: Processor Core ID: 0 <6>using C1E aware idle routine <6>ACPI: Core revision 20080609 <6>ACPI: Checking initramfs for custom DSDT <4>Parsing all Control Methods: <4>Table [DSDT](id 0001) - 904 Objects with 90 Devices 284 Methods 34 Regions <4>Parsing all Control Methods: <4>Table [SSDT](id 0002) - 8 Objects with 0 Devices 0 Methods 0 Regions <4> tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired <4>evxfevnt-0091 [00] enable : Transition to ACPI mode successful <6>Setting APIC routing to flat <6>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-58 stepping 02 <6>Using local APIC timer interrupts. <7>APIC timer calibration result 12500847 <6>Detected 12.500 MHz APIC timer. <6>Booting processor 1/1 ip 6000 <6>Initializing CPU#1 <6>Calibrating delay using timer specific routine.. 3800.32 BogoMIPS (lpj=7600642) <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) <6>CPU: L2 Cache: 512K (64 bytes/line) <6>CPU 1/1 -> Node 0 <6>CPU: Physical Processor ID: 0 <6>CPU: Processor Core ID: 1 <6>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 <6>CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-58 stepping 02 <6>System has AMD C1E enabled <6>Switch to broadcast mode on CPU0 <6>Brought up 2 CPUs <6>Total of 2 processors activated (7600.56 BogoMIPS). <7>CPU0 attaching sched-domain: <7> domain 0: span 0-1 level CPU <7> groups: 0 1 <7> domain 1: span 0-1 level NODE <7> groups: 0-1 <7>CPU1 attaching sched-domain: <7> domain 0: span 0-1 level CPU <7> groups: 1 0 <7> domain 1: span 0-1 level NODE <7> groups: 0-1 <6>Switch to broadcast mode on CPU1 <6>net_namespace: 1936 bytes <6>Booting paravirtualized kernel on bare hardware <6>NET: Registered protocol family 16 <7>node 0 link 0: io port [1000, fffff] <6>TOM: 0000000040000000 aka 1024M <7>node 0 link 0: mmio [a0000, bffff] <7>node 0 link 0: mmio [40000000, dfffffff] <7>node 0 link 0: mmio [e0000000, efffffff] <7>node 0 link 0: mmio [f0000000, fe0bffff] <7>bus: [00,ff] on node 0 link 0 <7>bus: 00 index 0 io port: [0, ffff] <7>bus: 00 index 1 mmio: [a0000, bffff] <7>bus: 00 index 2 mmio: [40000000, fcffffffff] <6>ACPI: bus type pci registered <5>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 4 <5>PCI: MCFG area at e0000000 reserved in E820 <6>PCI: Using MMCONFIG at e0000000 - e04fffff <6>PCI: Using configuration type 1 for base access <5>perfmon: version 2.82 <5>perfmon: CPU hotplug support enabled <4>evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 <7>ACPI: EC: Look up EC in DSDT <4>Completing Region/Field/Buffer/Package initialization:............................................................................................................................... <4>Initialized 33/34 Regions 6/6 Fields 45/45 Buffers 43/43 Packages (921 nodes) <4>Initializing Device/Processor/Thermal objects by executing _INI methods:<5>ACPI: BIOS _OSI(Linux) query ignored via DMI <4>. <4>Executed 1 _INI methods requiring 1 _STA executions (examined 95 objects) <4>evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 2 Runtime GPEs in this block <6>ACPI: Interpreter enabled <6>ACPI: (supports S0 S3 S4 S5) <6>ACPI: Using IOAPIC for interrupt routing <6>: ACPI: EC: non-query interrupt received, switching to interrupt mode <6>: ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 <6>: ACPI: EC: driver started in interrupt mode <6>ACPI: PCI Root Bridge [PCI0] (0000:00) <7>PCI: 0000:00:01.1 reg 10 io port: [3080, 30bf] <7>PCI: 0000:00:01.1 reg 20 io port: [3040, 307f] <7>PCI: 0000:00:01.1 reg 24 io port: [3000, 303f] <6>pci 0000:00:01.1: PME# supported from D3hot D3cold <6>pci 0000:00:01.1: PME# disabled <7>PCI: 0000:00:01.3 reg 10 32bit mmio: [f6200000, f627ffff] <7>PCI: 0000:00:02.0 reg 10 32bit mmio: [f6486000, f6486fff] <7>pci 0000:00:02.0: supports D1 <7>pci 0000:00:02.0: supports D2 <6>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold <6>pci 0000:00:02.0: PME# disabled <7>PCI: 0000:00:02.1 reg 10 32bit mmio: [f6489000, f64890ff] <7>pci 0000:00:02.1: supports D1 <7>pci 0000:00:02.1: supports D2 <6>pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold <6>pci 0000:00:02.1: PME# disabled <7>PCI: 0000:00:04.0 reg 10 32bit mmio: [f6487000, f6487fff] <7>pci 0000:00:04.0: supports D1 <7>pci 0000:00:04.0: supports D2 <6>pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold <6>pci 0000:00:04.0: PME# disabled <7>PCI: 0000:00:04.1 reg 10 32bit mmio: [f6489400, f64894ff] <7>pci 0000:00:04.1: supports D1 <7>pci 0000:00:04.1: supports D2 <6>pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold <6>pci 0000:00:04.1: PME# disabled <7>PCI: 0000:00:06.0 reg 20 io port: [30c0, 30cf] <7>PCI: 0000:00:07.0 reg 10 32bit mmio: [f6480000, f6483fff] <6>pci 0000:00:07.0: PME# supported from D3hot D3cold <6>pci 0000:00:07.0: PME# disabled <7>PCI: 0000:00:09.0 reg 10 io port: [30f0, 30f7] <7>PCI: 0000:00:09.0 reg 14 io port: [30e4, 30e7] <7>PCI: 0000:00:09.0 reg 18 io port: [30e8, 30ef] <7>PCI: 0000:00:09.0 reg 1c io port: [30e0, 30e3] <7>PCI: 0000:00:09.0 reg 20 io port: [30d0, 30df] <7>PCI: 0000:00:09.0 reg 24 32bit mmio: [f6484000, f6485fff] <7>PCI: 0000:00:0a.0 reg 10 32bit mmio: [f6488000, f6488fff] <7>PCI: 0000:00:0a.0 reg 14 io port: [30f8, 30ff] <7>PCI: 0000:00:0a.0 reg 18 32bit mmio: [f6489c00, f6489cff] <7>PCI: 0000:00:0a.0 reg 1c 32bit mmio: [f6489800, f648980f] <7>pci 0000:00:0a.0: supports D1 <7>pci 0000:00:0a.0: supports D2 <6>pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold <6>pci 0000:00:0a.0: PME# disabled <6>pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold <6>pci 0000:00:0c.0: PME# disabled <6>pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold <6>pci 0000:00:0d.0: PME# disabled <7>PCI: 0000:00:12.0 reg 10 32bit mmio: [f5000000, f5ffffff] <7>PCI: 0000:00:12.0 reg 14 64bit mmio: [d0000000, dfffffff] <7>PCI: 0000:00:12.0 reg 1c 64bit mmio: [f4000000, f4ffffff] <7>PCI: 0000:00:12.0 reg 30 32bit mmio: [0, 1ffff] <7>PCI: 0000:02:05.0 reg 10 32bit mmio: [0, 7ff] <7>pci 0000:02:05.0: supports D1 <7>pci 0000:02:05.0: supports D2 <6>pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold <6>pci 0000:02:05.0: PME# disabled <7>PCI: 0000:02:05.1 reg 10 32bit mmio: [f6100800, f61008ff] <7>pci 0000:02:05.1: supports D1 <7>pci 0000:02:05.1: supports D2 <6>pci 0000:02:05.1: PME# supported from D0 D1 D2 D3hot D3cold <6>pci 0000:02:05.1: PME# disabled <7>PCI: 0000:02:05.2 reg 10 32bit mmio: [f6100c00, f6100cff] <7>pci 0000:02:05.2: supports D1 <7>pci 0000:02:05.2: supports D2 <6>pci 0000:02:05.2: PME# supported from D0 D1 D2 D3hot D3cold <6>pci 0000:02:05.2: PME# disabled <7>PCI: 0000:02:05.3 reg 10 32bit mmio: [f6101000, f61010ff] <7>pci 0000:02:05.3: supports D1 <7>pci 0000:02:05.3: supports D2 <6>pci 0000:02:05.3: PME# supported from D0 D1 D2 D3hot D3cold <6>pci 0000:02:05.3: PME# disabled <7>PCI: 0000:02:05.4 reg 10 32bit mmio: [f6101400, f61014ff] <7>pci 0000:02:05.4: supports D1 <7>pci 0000:02:05.4: supports D2 <6>pci 0000:02:05.4: PME# supported from D0 D1 D2 D3hot D3cold <6>pci 0000:02:05.4: PME# disabled <6>pci 0000:00:08.0: transparent bridge <7>PCI: bridge 0000:00:08.0 32bit mmio: [f6100000, f61fffff] <7>PCI: bridge 0000:00:0c.0 io port: [4000, 4fff] <7>PCI: bridge 0000:00:0c.0 32bit mmio: [f2000000, f3ffffff] <7>PCI: bridge 0000:00:0c.0 64bit mmio pref: [f0000000, f1ffffff] <7>PCI: 0000:03:00.0 reg 10 64bit mmio: [f6000000, f6003fff] <7>pci 0000:03:00.0: supports D1 <7>pci 0000:03:00.0: supports D2 <7>PCI: bridge 0000:00:0d.0 32bit mmio: [f6000000, f60fffff] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] <6>ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *10 <6>ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11 <6>ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled. <6>ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled. <6>ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled. <6>ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled. <6>ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled. <6>ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10 <6>ACPI: PCI Interrupt Link [LSMB] (IRQs *10) <6>ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11 <6>ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7 <6>ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11 <6>ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *10 <6>ACPI: PCI Interrupt Link [LGPU] (IRQs 16) *10 <6>ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled. <6>ACPI: PCI Interrupt Link [LSI0] (IRQs 23) *11 <6>ACPI: PCI Interrupt Link [Z018] (IRQs 18) *5 <6>ACPI: PCI Interrupt Link [Z019] (IRQs 22) *10 <6>ACPI: PCI Interrupt Link [LPMU] (IRQs *11) <6>Linux Plug and Play Support v0.97 (c) Adam Belay <6>pnp: PnP ACPI init <6>ACPI: bus type pnp registered <6>pnp: PnP ACPI: found 12 devices <6>ACPI: ACPI bus type pnp unregistered <6>PCI: Using ACPI for IRQ routing <6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 <6>hpet0: 3 32-bit timers, 25000000 Hz <6>AppArmor: AppArmor Filesystem Enabled <7>Switched to high resolution mode on CPU 0 <7>Switched to high resolution mode on CPU 1 <4>ACPI: RTC can wake from S4 <6>system 00:02: iomem range 0xe0000000-0xefffffff could not be reserved <6>system 00:03: ioport range 0x1000-0x107f has been reserved <6>system 00:03: ioport range 0x1080-0x10ff has been reserved <6>system 00:03: ioport range 0x1400-0x147f has been reserved <6>system 00:03: ioport range 0x1480-0x14ff has been reserved <6>system 00:03: ioport range 0x1800-0x187f has been reserved <6>system 00:03: ioport range 0x1880-0x18ff has been reserved <6>system 00:04: ioport range 0x360-0x361 has been reserved <6>system 00:04: ioport range 0x4d0-0x4d1 has been reserved <6>system 00:0b: iomem range 0xffc00000-0xffffffff could not be reserved <6>system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved <6>system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved <6>system 00:0b: iomem range 0xfed00000-0xfed00fff has been reserved <6>system 00:0b: iomem range 0xfef00000-0xfef00fff has been reserved <6>pci 0000:00:08.0: PCI bridge, secondary bus 0000:02 <6>pci 0000:00:08.0: IO window: disabled <6>pci 0000:00:08.0: MEM window: 0xf6100000-0xf61fffff <6>pci 0000:00:08.0: PREFETCH window: disabled <6>pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04 <6>pci 0000:00:0c.0: IO window: 0x4000-0x4fff <6>pci 0000:00:0c.0: MEM window: 0xf2000000-0xf3ffffff <6>pci 0000:00:0c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff <6>pci 0000:00:0d.0: PCI bridge, secondary bus 0000:03 <6>pci 0000:00:0d.0: IO window: disabled <6>pci 0000:00:0d.0: MEM window: 0xf6000000-0xf60fffff <6>pci 0000:00:0d.0: PREFETCH window: disabled <7>pci 0000:00:08.0: setting latency timer to 64 <7>pci 0000:00:0c.0: setting latency timer to 64 <7>pci 0000:00:0d.0: setting latency timer to 64 <6>bus: 00 index 0 io port: [0, ffff] <6>bus: 00 index 1 mmio: [0, ffffffffffffffff] <6>bus: 02 index 0 mmio: [0, 0] <6>bus: 02 index 1 mmio: [f6100000, f61fffff] <6>bus: 02 index 2 mmio: [0, 0] <6>bus: 02 index 3 io port: [0, ffff] <6>bus: 02 index 4 mmio: [0, ffffffffffffffff] <6>bus: 04 index 0 io port: [4000, 4fff] <6>bus: 04 index 1 mmio: [f2000000, f3ffffff] <6>bus: 04 index 2 mmio: [f0000000, f1ffffff] <6>bus: 04 index 3 mmio: [0, 0] <6>bus: 03 index 0 mmio: [0, 0] <6>bus: 03 index 1 mmio: [f6000000, f60fffff] <6>bus: 03 index 2 mmio: [0, 0] <6>bus: 03 index 3 mmio: [0, 0] <6>NET: Registered protocol family 2 <6>IP route cache hash table entries: 32768 (order: 6, 262144 bytes) <6>TCP established hash table entries: 131072 (order: 9, 2097152 bytes) <6>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) <6>TCP: Hash tables configured (established 131072 bind 65536) <6>TCP reno registered <6>NET: Registered protocol family 1 <6>Unpacking initramfs... done <6>Freeing initrd memory: 6194k freed <6>Simple Boot Flag at 0x36 set to 0x1 <6>audit: initializing netlink socket (disabled) <5>type=2000 audit(1227035125.733:1): initialized <6>HugeTLB registered 2 MB page size, pre-allocated 0 pages <5>VFS: Disk quotas dquot_6.5.1 <4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>msgmni has been set to 466 <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) <6>io scheduler noop registered <6>io scheduler anticipatory registered <6>io scheduler deadline registered <6>io scheduler cfq registered (default) <6>perfmon: added sampling format default <6>pci 0000:00:00.0: Enabling HT MSI Mapping <6>pci 0000:00:07.0: Enabling HT MSI Mapping <6>pci 0000:00:08.0: Enabling HT MSI Mapping <6>pci 0000:00:09.0: Enabling HT MSI Mapping <6>pci 0000:00:0a.0: Enabling HT MSI Mapping <6>pci 0000:00:0c.0: Enabling HT MSI Mapping <6>pci 0000:00:0d.0: Enabling HT MSI Mapping <7>pci 0000:00:12.0: Boot video device <7>pcieport-driver 0000:00:0c.0: setting latency timer to 64 <6>pcieport-driver 0000:00:0c.0: found MSI capability <7>pci_express 0000:00:0c.0:pcie00: allocate port service <7>pci_express 0000:00:0c.0:pcie03: allocate port service <7>pcieport-driver 0000:00:0d.0: setting latency timer to 64 <6>pcieport-driver 0000:00:0d.0: found MSI capability <7>pci_express 0000:00:0d.0:pcie00: allocate port service <7>pci_express 0000:00:0d.0:pcie03: allocate port service <6>vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000a80000, using 6144k, total 65536k <6>vesafb: mode is 1024x768x16, linelength=2048, pages=1 <6>vesafb: scrolling: redraw <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 <6>bootsplash 3.1.6-2004/03/31: looking for picture... <6>bootsplash: silentjpeg size 100719 bytes <6>bootsplash: ...found (1024x768, 38691 bytes, v3). <4>Console: switching to colour frame buffer device 124x44 <6>fb0: VESA VGA frame buffer device <7>hpet_resources: 0xfed00000 is busy <6>Non-volatile memory driver v1.2 <6>Linux agpgart interface v0.103 <6>Serial: 8250/16550 driver8 ports, IRQ sharing disabled <6>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>serio: i8042 AUX port at 0x60,0x64 irq 12 <6>mice: PS/2 mouse device common for all mice <6>cpuidle: using governor ladder <6>cpuidle: using governor menu <6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 <6>TCP cubic registered <4>registered taskstats version 1 <6>Freeing unused kernel memory: 1464k freed <6>Write protecting the kernel read-only data: 5064k <5>ACPI: processor limited to max C-state 1 <6>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) <6>processor ACPI0007:00: registered as cooling_device0 <6>ACPI: Processor [CPU0] (supports 8 throttling states) <6>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) <6>processor ACPI0007:01: registered as cooling_device1 <6>ACPI: Processor [CPU1] (supports 8 throttling states) <4>ACPI Exception (thermal-0378): AE_OK, No or invalid critical threshold [20080609] <6>ACPI: No dock devices found. <5>SCSI subsystem initialized <7>libata version 3.00 loaded. <7>ahci 0000:00:09.0: version 3.0 <4>ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23 <6>ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23 <6>ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode <6>ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio slum part <7>ahci 0000:00:09.0: setting latency timer to 64 <6>scsi0 : ahci <6>scsi1 : ahci <6>scsi2 : ahci <6>scsi3 : ahci <6>ata1: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484100 irq 4349 <6>ata2: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484180 irq 4349 <6>ata3: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484200 irq 4349 <6>ata4: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484280 irq 4349 <6>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata1.00: ATA-7: ST9160821AS, 3.BHE, max UDMA/100 <6>ata1.00: 312581808 sectors, multi 16: LBA48 <6>ata1.00: configured for UDMA/100 <6>Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 <6>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1 ********* Here my system starts freezing unless i press and hold a key******** ******************************************************************************* <6>ata2: SATA link down (SStatus 0 SControl 300) <6>ata3: SATA link down (SStatus 0 SControl 300) <6>ata4: SATA link down (SStatus 0 SControl 300) <5>scsi 0:0:0:0: Direct-Access ATA ST9160821AS 3.BH PQ: 0 ANSI: 5 <6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found <6>udevd version 128 started <6>: usbcore: registered new interface driver usbfs <6>: usbcore: registered new interface driver hub <6>: usbcore: registered new device driver usb <5>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160GB/149GiB) <5>sd 0:0:0:0: [sda] Write Protect is off <7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 <7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver <5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <4>ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18 <6>ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 18 (level, low) -> IRQ 18 <7>ohci_hcd 0000:00:02.0: setting latency timer to 64 <6>ohci_hcd 0000:00:02.0: OHCI Host Controller <6>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 <6>ohci_hcd 0000:00:02.0: irq 18, io mem 0xf6486000 <4>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after <5>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160GB/149GiB) <5>sd 0:0:0:0: [sda] Write Protect is off <7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 <5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6> sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4 <6>usb usb1: configuration #1 chosen from 1 choice <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 7 ports detected <5>sd 0:0:0:0: [sda] Attached SCSI disk <6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb1: Product: OHCI Host Controller <6>usb usb1: Manufacturer: Linux 2.6.27.5-2-default ohci_hcd <6>usb usb1: SerialNumber: 0000:00:02.0 <4>ACPI: PCI Interrupt Link [Z018] enabled at IRQ 18 <6>ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z018] -> GSI 18 (level, low) -> IRQ 18 <7>ohci_hcd 0000:00:04.0: setting latency timer to 64 <6>ohci_hcd 0000:00:04.0: OHCI Host Controller <6>ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 <6>ohci_hcd 0000:00:04.0: irq 18, io mem 0xf6487000 <6>usb usb2: configuration #1 chosen from 1 choice <6>hub 2-0:1.0: USB hub found <6>hub 2-0:1.0: 2 ports detected <6>usb 1-4: new low speed USB device using ohci_hcd and address 2 <6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 <6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb2: Product: OHCI Host Controller <6>usb usb2: Manufacturer: Linux 2.6.27.5-2-default ohci_hcd <6>usb usb2: SerialNumber: 0000:00:04.0 <4>ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 <6>ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22 <7>ehci_hcd 0000:00:02.1: setting latency timer to 64 <6>ehci_hcd 0000:00:02.1: EHCI Host Controller <6>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 <6>ehci_hcd 0000:00:02.1: debug port 1 <7>ehci_hcd 0000:00:02.1: cache line size of 64 is not supported <6>ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6489000 <6>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 <6>usb usb3: configuration #1 chosen from 1 choice <6>hub 3-0:1.0: USB hub found <6>hub 3-0:1.0: 7 ports detected <6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 <6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb3: Product: EHCI Host Controller <6>usb usb3: Manufacturer: Linux 2.6.27.5-2-default ehci_hcd <6>usb usb3: SerialNumber: 0000:00:02.1 <4>ACPI: PCI Interrupt Link [Z019] enabled at IRQ 22 <6>ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z019] -> GSI 22 (level, low) -> IRQ 22 <7>ehci_hcd 0000:00:04.1: setting latency timer to 64 <6>ehci_hcd 0000:00:04.1: EHCI Host Controller <6>ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 4 <6>ehci_hcd 0000:00:04.1: debug port 1 <7>ehci_hcd 0000:00:04.1: cache line size of 64 is not supported <6>ehci_hcd 0000:00:04.1: irq 22, io mem 0xf6489400 <6>ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 <6>usb usb4: configuration #1 chosen from 1 choice <6>hub 4-0:1.0: USB hub found <6>hub 4-0:1.0: 2 ports detected <3>usb 1-4: device not accepting address 2, error -62 <3>hub 1-0:1.0: unable to enumerate USB device on port 4 <6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 <6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb4: Product: EHCI Host Controller <6>usb usb4: Manufacturer: Linux 2.6.27.5-2-default ehci_hcd <6>usb usb4: SerialNumber: 0000:00:04.1 <6>PM: Starting manual resume from disk <6>usb 1-4: new low speed USB device using ohci_hcd and address 4 <6>usb 1-4: configuration #1 chosen from 1 choice <6>usb 1-4: New USB device found, idVendor=15ca, idProduct=00c3 <6>usb 1-4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 <6>usb 1-4: Product: USB Optical Mouse <6>usb 2-1: new full speed USB device using ohci_hcd and address 2 <6>usb 2-1: configuration #1 chosen from 1 choice <6>usb 2-1: New USB device found, idVendor=03f0, idProduct=171d <6>usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 <6>usb 2-1: Product: HP Integrated Module <6>usb 2-1: Manufacturer: Broadcom Corp <6>: usbcore: registered new interface driver hiddev <6>input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input2 <6>input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:02.0-4 <6>: usbcore: registered new interface driver usbhid <6>usbhid: v2.6:USB HID core driver <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on sda7, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>udevd version 128 started <6>Bluetooth: Core ver 2.13 <6>NET: Registered protocol family 31 <6>Bluetooth: HCI device and connection manager initialized <6>Bluetooth: HCI socket layer initialized <5>sd 0:0:0:0: Attached scsi generic sg0 type 0 <6>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 <7>pata_amd 0000:00:06.0: version 0.3.10 <7>pata_amd 0000:00:06.0: setting latency timer to 64 <6>scsi4 : pata_amd <6>scsi5 : pata_amd <6>ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14 <6>ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15 <6>ACPI: Power Button (FF) [PWRF] <6>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 <6>ACPI: Sleep Button (CM) [SLPB] <6>ACPI: AC Adapter [ACAD] (on-line) <6>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5 <6>ata5.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, HH18, max MWDMA2 <7>ata5: nv_mode_filter: 0x39f&0x39f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12) <6>ACPI: Lid Switch [LID] <6>ata5.00: configured for MWDMA2 <7>ata6: port disabled. ignoring. <4>isa bounce pool size: 16 pages <5>scsi 4:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632D HH18 PQ: 0 ANSI: 5 <5>scsi 4:0:0:0: Attached scsi generic sg1 type 5 <6>ricoh-mmc: Ricoh MMC Controller disabling driver <6>ricoh-mmc: Copyright(c) Philip Langdale <6>ricoh-mmc: Ricoh MMC controller found at 0000:02:05.2 [1180:0843] (rev 12) <6>ricoh-mmc: Controller is now disabled. <6>ohci1394 0000:02:05.0: enabling device (0100 -> 0102) <4>ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5 <6>vendor=10de device=0561 <6>ohci1394 0000:02:05.0: PCI INT A -> Link[LNK1] -> GSI 5 (level, low) -> IRQ 5 <6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[f6100000-f61007ff] Max Packet=[2048] IR/IT contexts=[4/4] <6>ACPI: Battery Slot [BAT0] (battery present) <6>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6 <6>ACPI: Power Button (CM) [PWRB] <4>nvidia: module license 'NVIDIA' taints kernel. <4>ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 16 <6>nvidia 0000:00:12.0: PCI INT A -> Link[LGPU] -> GSI 16 (level, low) -> IRQ 16 <7>nvidia 0000:00:12.0: setting latency timer to 64 <4>NVRM: loading NVIDIA UNIX x86_64 Kernel Module 177.80 Wed Oct 1 14:43:46 PDT 2008 <6>ACPI: WMI: Mapper loaded <6>Bluetooth: HCI USB driver ver 2.10 <6>: usbcore: registered new interface driver hci_usb <6>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. <4>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 <6>forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20 <7>forcedeth 0000:00:0a.0: setting latency timer to 64 <6>input: PC Speaker as /devices/platform/pcspkr/input/input7 <6>acpi device:25: registered as cooling_device2 <6>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/input/input8 <6>ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) <7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b003333c700] <6>Uniform Multi-Platform E-IDE driver <6>rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 <6>: rtc0: alarms up to one year, y3k, hpet irqs <6>sdhci: Secure Digital Host Controller Interface driver <6>sdhci: Copyright(c) Pierre Ossman <6>Bluetooth: Generic Bluetooth USB driver ver 0.3 <6>: usbcore: registered new interface driver btusb <6>forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1e:68:2c:ae:f7 <6>forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq lnktim msi desc-v3 <4>ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19 <6>vendor=10de device=0563 <6>b43-pci-bridge 0000:03:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, low) -> IRQ 19 <6>sdhci-pci 0000:02:05.1: SDHCI controller found [1180:0822] (rev 22) <7>b43-pci-bridge 0000:03:00.0: setting latency timer to 64 <4>ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7 <6>vendor=10de device=0561 <6>sdhci-pci 0000:02:05.1: PCI INT B -> Link[LNK2] -> GSI 7 (level, low) -> IRQ 7 <6>mmc0: SDHCI controller on PCI [0000:02:05.1] using PIO <6>ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 <4>ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 <6>HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21 <7>HDA Intel 0000:00:07.0: setting latency timer to 64 <4>sr0: scsi3-mmc drive: 47x/47x writer dvd-ram cd/rw xa/form2 cdda tray <6>Uniform CD-ROM driver Revision: 3.20 <7>sr 4:0:0:0: Attached scsi CD-ROM sr0 <6>b43-phy0: Broadcom 4311 WLAN found <7>phy0: Selected rate control algorithm 'pid' <6>Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ] <6>Adding 1261060k swap on /dev/sda5. Priority:-1 extents:1 across:1261060k <6>device-mapper: uevent: version 1.0.3 <6>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com <6>loop: module loaded <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on sda6, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <4>fuse init (API version 7.9) Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console (deleted)) at Wed Nov 19 00:35:59 2008 done Starting udevd: done Loading drivers, configuring devices: done Loading required kernel modules doneActivating swap-devices in /etc/fstab... doneSetting up the hardware clockdone Activating device mapper... done Checking file systems... fsck 1.41.1 (01-Sep-2008) /dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part6: recovering journal /dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part6: clean, 1247/705744 files, 110191/2821399 blocks donedone Mounting local file systems... /proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) debugfs on /sys/kernel/debug type debugfs (rw) udev on /dev type tmpfs (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/sda6 on /home type ext3 (rw,acl,user_xattr) done/etc/init.d/boot.braille: line 20: [: braille=1: binary operator expected done Fuse filesystem already availabledone Mounting fuse control filesystemdone Retry device configuration: done Activating remaining swap-devices in /etc/fstab... doneSetting current sysctl status from /etc/sysctl.conf net.ipv4.icmp_echo_ignore_broadcasts = 1 net.ipv4.conf.all.rp_filter = 1 fs.inotify.max_user_watches = 65536 net.ipv4.conf.default.promote_secondaries = 1 net.ipv4.conf.all.promote_secondaries = 1 done Turning quota on Checking quotas. This may take some time. done Enabling syn flood protectiondone Disabling IP forwardingdone done <notice>killproc: kill(694,29) Creating /var/log/boot.msg doneSetting up hostname 'linux-v5wz'done Setting up loopback interface lo lo IP address: 127.0.0.1/8 IP address: 127.0.0.2/8 done System Boot Control: The system has been set up System Boot Control: Running /etc/init.d/boot.local done<notice>killproc: kill(694,3) INIT: Boot logging started on /dev/tty1(/dev/console) at Tue Nov 18 19:06:28 2008 Master Resource Control: previous runlevel: N, switching to runlevel: 5 Initializing random number generatordone <notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part7 _=/sbin/startproc DAEMON=/sbin/syslog-ng ] <notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part7 _=/sbin/startproc DAEMON=/sbin/acpid ] <notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part7 _=/sbin/startproc DAEMON=/sbin/klogd ] Starting acpid done Starting syslog servicesdone acpid: starting up acpid: 2 rules loaded Starting D-Bus daemondone Starting Firewall Initialization (phase 1 of 2) done Loading CPUFreq modulesdone Starting HAL daemondone Starting service kdm<notice>startproc: execve (/usr/bin/kdm) [ /usr/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PWD=/ LANG=en_US.UTF-8 PREVLEVEL=N LINES=44 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=DMZ WINDOWMANAGER= SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part7 _=/sbin/startproc DAEMON=/usr/bin/kdm ] done Starting rpcbind <notice>startproc: execve (/sbin/rpcbind) [ /sbin/rpcbind ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part7 _=/sbin/startproc DAEMON=/sbin/rpcbind ] done Backgrounding to notify hosts... Not starting NFS client services - no NFS found in /etc/fstab:unused Loading keymap assuming iso-8859-15 euro Loading /usr/share/kbd/keymaps/i386/qwerty/us.map.gz doneLoading compose table latin1.adddone Start Unicode mode done<notice>checkproc: /usr/bin/kdm 2549 Starting brld done <notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part7 _=/sbin/startproc DAEMON=/sbin/auditd ] Starting a11y check done <notice>startproc: execve (/usr/sbin/irqbalance) [ /usr/sbin/irqbalance ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part7 _=/sbin/startproc DAEMON=/usr/sbin/irqbalance ] <notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part7 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ] Starting irqbalance done Starting cupsddone Starting auditd done Starting Avahi daemon done Starting java.binfmt_misc done Starting bluetooth: bluetoothd hid2hci rfcommdone Starting the NetworkManager<notice>startproc: execve (/usr/sbin/NetworkManager) [ /usr/sbin/NetworkManager ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts DO_CONFIRM= vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PWD=/etc/sysconfig/network PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part7 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManager ] done <notice>checkproc: /usr/sbin/NetworkManager 2956 Starting Name Service Cache Daemon<notice>checkproc: /usr/bin/kdm 2549 <notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part7 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] done No active profileunused Starting mail service (Postfix)done Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part7 _=/sbin/startproc DAEMON=/usr/sbin/cron ] done Starting suse-blinux done Starting smartd done Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-ST9160821AS_5MA7Y7TW-part7 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] done Starting Firewall Initialization (phase 2 of 2) done done Master Resource Control: runlevel 5 has been reached Skipped services in runlevel 5: nfs pm-profiler <notice>killproc: kill(2208,3) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=445433 User A.Seifert@mus.cz added comment https://bugzilla.novell.com/show_bug.cgi?id=445433#c2 Ales Seifert <A.Seifert@mus.cz> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |A.Seifert@mus.cz --- Comment #2 from Ales Seifert <A.Seifert@mus.cz> 2009-01-09 14:32:20 MST --- probably reported the same problem bug#465014 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=445433 User pavel@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=445433#c3 Pavel Machek <pavel@novell.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |NEEDINFO Info Provider| |sajan.johnson@saudia.com --- Comment #3 from Pavel Machek <pavel@novell.com> 2009-02-03 15:21:13 MST --- nohz=off highres=off should work around this... ..but this is reported against beta5. Does it still happen in final version? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

https://bugzilla.novell.com/show_bug.cgi?id=445433 User jkosina@novell.com added comment https://bugzilla.novell.com/show_bug.cgi?id=445433#c5 --- Comment #5 from Jiri Kosina <jkosina@novell.com> 2009-02-18 08:33:38 MST --- Sajan, were you able to verify whether there is a BIOS upgrade available for your system, and whether nohz=off highres=off kernel parameter fixes the issue you are seeing? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.